This guy is so good at explaining how to repair screens. Excellent!

@cameronmowery7065

3 ай бұрын

So true🎉

Honestly out of all the KZread videos about screening that I’ve seen. yours are the best most accurate and professional. I’ve seen a few videos on here where the people are explaining how to screen and they have no clue what they’re doing . I’ve followed almost all your videos if I was a little closer to you ide be asking for a job. If you had someone like me on your crew you wouldn’t need walkboards or scaffolds. At least not for screening . I would 100% be an asset to your company.I’m in pinellas pasco though.I was going down south to northport and Marco island for a month just recently and they’re paying amazing.

@solidmakersaluminum

Жыл бұрын

Thanks, and yes the Florida Glass screen and super screen are way more difficult. I don't like to walk the beams because of the horror stories I've seen and heard, guys fall and get seriously injured. I don't want my guys to get hurt, and honestly OSHA wont' be too happy to see us doing that. I know almost every company out here walks the beams, but I cant risk it. Safety first. If you move down to the area, I'm always on the lookout for people to add to the team.

@michaelpalermo5785

Жыл бұрын

@@solidmakersaluminum Oh yeah I’m sure of it bro as lucky as I’ve been I’ve had four or five falls, but adrenaline on the way down. Kind of kept me safe for the fall shit three out of four times I jumped right back up and it look like I fell and hit hard enough to either knock myself out or break something , but you know how it is man got to get the job done last thing me or you were trying to here or on this job trying to beat the light is on one of our man just took a crash for being on careful and now we gotta run him to a hospital or he’s in capable to work now Now Mami trying to hear that so I think the mixture of adrenaline and knowing I got to get this shit screen kind of protected me on the falls but you know it’s just like any job more. You do it the more you come accustomed to it, you get better and better, I always use 10% being careful and 90% is the fear of falling or is it 10% fear and 90% of being careful lol I guess it depends on if my coworkers are slacking off. Lol

@michaelpalermo5785

Жыл бұрын

@@solidmakersaluminum I wanna lie to you bro I’ve been following you and watch monster videos. You got a nice little crew going on everybody knows her role and does what they need to. Do you look like one hell of a boss man. I really wouldn’t mind tagging along with the crew and knocking out a couple roof for you guys. Have y’all seen me in action I’m an asset to any company I go to.

I like his vibe😂🔥

@solidmakersaluminum

Ай бұрын

Thanks, I'm glad i bring you good vibes, THANKS!!!!

Efficient. Thank you.

God bless you for getting it done. But the roller you are using is for windows mainly. You should get a flat spline roller wheel from your screen supplier and attach it to a stanley quick change knife. Also is is imperative that you use the flat spline the correct way, if you were to screen the roof incorrectly you are putting the next guy who walks the beams at risk. The ROUND side should be visible once installed. I have been building pool enclosures for 21 years in east central Florida.

@TimHarris-fq5nl

29 күн бұрын

What’s a good supply store for screen and spline?

@daynapper7337

25 күн бұрын

@@TimHarris-fq5nl The big box stores like Home Depot and Lowes carry some Phiferglass Screen which is the screen we use. We buy our materials at Town and Country which requires you to be a licensed contractor.

@MichaelBrianInc

24 күн бұрын

I’m in central Florida and want to get in to rescreening. How can I go about this?

@daynapper7337

23 күн бұрын

@@MichaelBrianInc What area? There is a lot of Screen companies that are always hiring including myself. I would recommend going with a company that builds enclosures as well as rescreen.

@MichaelBrianInc

23 күн бұрын

@@daynapper7337 Orlando

It’s a lot easier if pre-roll the spline groove first. Also the rounded side of the spline goes into the groove facing the panel if you do it the other way it’s in backwards.

@solidmakersaluminum

Жыл бұрын

Ive seen people preroll also, but if you do that the screen wont be as tight, but yes you can preroll, i just prefer not to so the screen will be a lot tighter at the end.

@michaelpalermo5785

Жыл бұрын

@@solidmakersaluminum I’m actually a roof guy I hop up there and climb the cage no walkboards or ladders . We’ll I use the ladder to get to the roof once I’m up there I just crawl the beams and perlins I can tackle 1500sq ft roof in a day by myself no problem . 1000sq ft roofs that don’t have a bunch of crazy angle panels or b.s in my way like shingle debri in spline groove.funky angles pinched spline grooves . I can take a standard easy 1000sqft in under 4 hrs.

@michaelpalermo5785

Жыл бұрын

I hear yah what yah mean with the not prerolling but I can’t agree in my opinion. I never have a problem with them being any kind of loose. There’s small tricks you learn with experiences . Like the fact of having to roll your first side evenly and straight is as important as your tighten side . You can stretch and roll 3ft at a time if your first side rolled is even .

@michaelpalermo5785

Жыл бұрын

If people think that standard 18/14 phifer screen is difficult to roll in . They need to try Florida glass solar screen or super screen

I'm not worried about the side panels, it's the one in the middle of the top of the screen ten feet up that worries me!

@solidmakersaluminum

Ай бұрын

Yes, we use scaffolds to replace the ones on top, theres alot of guys that walk the beams, but we like the safer approach and use scaffolds with planks.

I start this job doing this Monday, brother what is the name of that tool! Thank you for your video

@solidmakersaluminum

Жыл бұрын

its called a screen roller, you can buy one at ace hardware

@FromTheHood2TheWoods

Жыл бұрын

@@solidmakersaluminum spline roller. I got one thank you sir. I’ve done home remodeling about 3 years. This work should be cake. With that light aluminum. Seems easy peezy. Except for walking those beams on top and using ladders resting on planks over pools. Not sure I’m down for that. Not gonna get hurt and be in a wheelchair rest my life

@solidmakersaluminum

Жыл бұрын

@@FromTheHood2TheWoods be safe, we dont walk the beams, we use scaffolds and planks.

That roller is for window screens

What size spline is that?

@solidmakersaluminum

2 ай бұрын

size for this enclosure, and most enclosures is: flat .315 spline

LOL I am still fighting to get the old spline out.

Where are you located. What your cost?

@solidmakersaluminum

Жыл бұрын

Clewiston, but we work mainly in Fort Myers & Cape Coral area at the moment.

@tiamor100

Жыл бұрын

@@solidmakersaluminum I live in Fort Myers

@solidmakersaluminum

Жыл бұрын

@@tiamor100 give us a call , we work in Fort Myers almost everyday.

Your not supposed to use both sides of the spline. If you use the wrong side of it It will fall out once it dry rots

😂😂 please don’t not listen to this guy

Bro didnt even show you start it, lmfao terrible video

@blokka72727

Ай бұрын

on god bro 😭😭😭

Can you please tell me What size spline is used on the screen thanks in advance