How long is that walkboard and where on earth did you find it?

what would you guys charge per square panel if I was only needing to replace about three different squares? One on top, one on the angle and one on the side.

Can you post more videos and explain where to start on the roof and how to do the hip panels

@reliablescreenprotection3677

6 жыл бұрын

There's many ways to doing the hip roof the way I do it start at the top ice cream down one side straight at the bottom of that I go 90 degrees and I take that screen straight as an arrow and then I go back to the top I'll pull down and that's where the extra screen will pull all the way down to the bottom and then from that corner I'll go back to the end where the 90 finished there's other ways of doing it that's the way I do

@bewatah6073

5 жыл бұрын

I start hips in middle and start bottom up and finished from top

Flip the spline to the inside 1/2 turn before rolling. It will roll much easier. It would take me under an hour to screen that roof fully.

@kickzxx1525

2 жыл бұрын

Bro what’s the name of the stuff where he’s standing up ? I want to do this job my self. Any advice. Thanks

do you just lay screen over the long supports and just spline the one side you can reach? Or do you also spline the supports running long ways away from you?

@Perry32960

5 жыл бұрын

two long splines hold the run in

Great video. Does that platform that he's walking on stay ontop of the gutter?? What if the gutter is loose?

@reliablescreenprotection3677

6 жыл бұрын

we cheek it before we go on it I hang on it or we put a new screw next to the beam into the gutter and fascia

@nickpeezy1443

4 жыл бұрын

The gutter holds up the whole cage

Thats the way you do it with the walk board. I do the same thing, But why trim the slants on left and sheet all the rest?

@creolecajun9988

2 жыл бұрын

What do you do if it's just the middle top to replace how would you get to it?

I wanna see how to taut the corners

Yeah but what if you just had to replace the middle top? How would that be done without taking down one of the sides?

@teddepeola6409

Жыл бұрын

picks come in different lenghts or you can get expandable wood ones ainters use. It's scary one slip and its no longer worth it. I have your problem but am waiting for help

stupid question what is the metal platform the guys are standing on called i've looked up scaffolding but nothing pops up.thanks

@reliablescreenprotection3677

6 жыл бұрын

wanger staging

@lenacampos2548

3 жыл бұрын

A walk board

Do you guys always sheet the top. Or did you just not show the people how to cut The purlins in?

@IrishAnnie

2 жыл бұрын

Our insurance adjuster told us it should NOT be sheeted. Each one needs to be splined. If a high wind or tree branch damaged one square, it would be less expensive to replace. Also hurricane winds would take the whole row OUT and you would have less protection until it’s rescreened. In our case after Hurricane Erma, it was 6 months.

@big_redd2560

2 жыл бұрын

@@IrishAnnie Honestly if you wanna save your cage from a hurricane or atleast try to, would be to cut the panels or pull the spline so wind can flow through the cage better bc the screen acts like a sail and will destroy the metal

Not trying to be difficult with you, but you never actually covered the how part, just watching people work is not a tutorial.

Why do you guys roll over the perlins?

@reliablescreenprotection3677

3 жыл бұрын

its not necessary but if they request it we will split the perlins a upgrade

Don't pull or stretch the spline. It will shrink in the heat. Pro tip...

@redactedinformation2813

2 жыл бұрын

Twist the spline... twice over into the panel...

@yabonjin

2 жыл бұрын

Screen doesn’t shrink in the heat. If it’s fiberglass it expands in the heat much less than the aluminum frame so the frame pulls it apart. If it’s steel it also expands only half as fast as the aluminum frame. Same results don’t stretch it too tight.

Pros don’t need walkboards

@gregm5408

2 жыл бұрын

Lol

That’s some shoddy shit rolling over the perlins fly by the night

@syberop5

4 жыл бұрын

I hate to say most companies do that nowadays not just fly by night anymore

@deadalivegirl

4 жыл бұрын

Must cut in after sheeting!🤯 If you don't cut it in, when one panel on top fails they all fail in the same run. What I don't believe is that the guy did this when he knew he was on film.Why would you film yourself ripping people off? 🤦‍♀️🤦‍♀️🤦‍♀️🤦‍♀️(DOHHHHH) If you're in Central Florida you are better off just going with another company. I swear by Sunstate Screening. 🌞

@lenacampos2548

3 жыл бұрын

Thankyou!!

@joshsikora110

3 жыл бұрын

Sheeting is cheating! . I hate when I show up to at job and I have to tell the customer that I have to replace The whole straight run bc the last guy sheeted it.

@taylorromero937

3 жыл бұрын

Skipping the purlins haha cheap n fast and cost the customers later on

Not to rolling the 2x2s? Lol that's not "how you do it"

If you were a real pro you would be walking the roof not using walk beams!!!! Lmfao😁😂😀😂😂😂😂 I can do that entire roof and cut it in my self in 3 hours 4 hours max. No walkboards.. All i need is an 8ft ladder to get on the roof. The rest is history. These guys are rookies.

@MucaroBoricua

5 жыл бұрын

Palermo, be honest. You can walk on the beams because you are less than 5 foot tall and weight 80 lbs.

@MrThekingkongkid

5 жыл бұрын

Then weres your videos at gug

@tylereastwood575

4 жыл бұрын

Yeah then you realise walking on beams isn't what it's cracked up to be and when u really think you're good you go back to a walk board because you realise it's faster ,safer, and your man hood isn't on the line

@kennethfrank3451

4 жыл бұрын

What’s it matter walk board or not the guy is making money 😂 I do both just depends on the job I have fell through a perlin and screws were rusted so walk board for the win

@bestdamnscreeners3749

3 жыл бұрын

The beams Do Not Bend,lol I can do 1000sq ft in 2 hours walking beams

You walking those beams, you psycho?

Who df is this guy trying to tell homeboy to turn off the rap music 🎶 Man U got me all the way fucked up

This wasn’t helpful at all