How to Install a Kwikset Halo Touch Deadbolt
Тәжірибелік нұсқаулар және стиль
I show the steps to install a Kwikset Halo Touch deadbolt lock. This lock works with a key, your finger print or the Kwikset app. You can monitor the status of the lock and control it with an app on your phone.
Check out more home improvement tips on our weekly podcast
itunes.apple.com/us/podcast/f...
Пікірлер: 13
Thank you for the through walkthrough
@FIXITHomeImprovementChannel
Жыл бұрын
You're welcome. Check out more home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9?notRedirectToSDP=1&.
Thank you for your instructional video. I was able to tighten up the screws that had become loosened over time. 👍🏾
@FIXITHomeImprovementChannel
7 ай бұрын
Glad it was helpful. Check out some home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9?notRedirectToSDP=1&.
@FIXITHomeImprovementChannel
7 ай бұрын
Glad it was helpful. Check out some home improvement tips in our e-books www.amazon.com/gp/product/B0CNCG1V8X.
Thank you!
@FIXITHomeImprovementChannel
19 күн бұрын
You're welcome Check out some home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9
What are size of the screws at the very end?
It would be helpful to say that the batteries in the box are usually bad. Replacing them with new batteries got me past the red light failure. Another problem is that the cord can rub against the bolt causing the bolt to not move smoothly. I had to fiddle with the cable to get it to fit in without rubbing against the bolt. Seems like a design flaw.
@39872adnan
9 ай бұрын
I am having the EXACT same issue with the cable. No matter how I tuck it in, as soon as I attach it unit to the mount, the cable gets untucked and is rubbing up with the bolt causing the "jam." Super annoying. It's just an expensive bolt at the moment until I figure this out. If I don't, I am returning it.
@hazael165
4 ай бұрын
I have the same issue with the cord…! I’ve been using the key :-(
@JB47442
4 ай бұрын
Well, the cord can be maneuvered to get to work properly but it’s tricky. I’m no handyman but fiddled with it enough and finally was able to get it to a spot that stayed clear of the bolt. It’s just a poor design.
How are you