How To Fix Fan Speed Control on 2004 Silverado Sierra Blower Motor Resistor Install
Автокөліктер мен көлік құралдары
Does your General Motors fan speed controller blow fast but not slow? You may need a new fan speed control resistor! Pete's 1st Gen 2004 Silverado fan speed control only worked for positions 3, 4, and 5 while positions 1 and 2.
This video should directly apply to all GM Trucks produced between 1999 through 2007 including the Suburban, Sierra, Yukon, Silverado, Avalanche, Tahoe, and Escalade.
#1stGenSilverado #SilveradoDIYs #GMTruckMods
👉🏼 LINKS TO PURCHASE TOOLS & PARTS FEATURED BELOW 👈🏼
⚠️Try anything shown in this video at your own risk ⚠️
********************************************************************
🔩Parts (Affiliate Links)
********************************************************************
AC Blower Motor Resistor Kit With Harness - Replaces# 89019088, 973-405, 15-81086, 22807123: amzn.to/2RK9BOo
Fits HVAC Fan Blower Motor in the following vehicles:
Chevy Silverado, Tahoe, Suburban, & Avalanche
GMC Sierra, & Yukon
Cadillac Escalade
********************************************************************
📽️ Associated Videos
********************************************************************
********************************************************************
🔧 Tools (Affiliate Links)
********************************************************************
🔨 Essential DIY Tools:
***************************************************
🎬 Most Current Recording equipment (Affiliate Links)
***************************************************
📷 Video
Canon R6: geni.us/CanonR6_4K
Canon RF 24-70mm F2.8 L is USM Lens: geni.us/VnTwT
Canon 80D Camera Body: geni.us/Canon-EOS80D
Sigma 18-35mm F1.8 Art DC HSM Lens for Canon: geni.us/SigmaLense
Race clips shot using GoPro: geni.us/HERO9Black
🔊 Audio:
Lapel Mic: geni.us/PicoMic
Zoom ZH1 H1 Handy Portable Digital Recorder:
geni.us/ZoomRec
💡 Lighting:
Genaray Flood Light geni.us/GenarayLED
Genaray Softbox: geni.us/GenarayLightBox
Newer Ultra High Power Video Light: amzn.to/2Hl3QO7
----------
Thank you to all of our fans and subscribers for supporting us on our journey!
FOLLOW US ON INSTAGRAM: @THESUNDAEDRIVE - thesundaedrive
CHECK OUT OUR WEBSITE & BLOG: www.thesundaedrive.com
********************************************************************
👪 Partners and Sponsors
********************************************************************
Tool and Dye Designs - Auto enthusiast inspired clothing:
Website: www.toolanddyedesigns.com
Kies Motorsports - For all your BMW needs
Website: www.kiesmotorsports.com
KZread: / kiesmotorsports
Speed Circuit - LS Powered Exocet and Evo Upgrades
Website: www.SpeedCircuit.net
********************************************************************
🎵 Music
********************************************************************
BirdBrainz - Otis McDonald
Пікірлер: 250
I want to stay here for an hour and click on the upvote button continuously for all the money & time you just saved me. Perfect diagnosis (I only had fan speed 5) and the part fit like a champ and I've got all 5 fan speeds again. THANK YOU THANK YOU THANK YOU.
@TheSundaeDrive
2 жыл бұрын
Awesome! Glad it helped! That's much appreciated.
Just completed it. Worked like a champ. Thanks for the simple, straightforward video!! (2003 Sierra) Note: there is a mounting plate on my particular model that covered the resistor unit. On mine, I had to discard it but the Duralast replacement part is designed to fit without that mounting plate.
Love the close up shots. Most videos aren’t this close. People forget we’re watching on iPad/iPhone. Excellent job!
Thanks so much for the video. Changed mine out yesterday, 2003 GMC Sierra. I came back from vacation after 3weeks and drove to the store and could smell something like burning electrical. I came out of the store and everything quit, or at least I thought it did. I checked the fuse and it was ok. I did have power to the unit and the ac lights would come on but no fan. After watching your video I suspected it was the resistor because about a year ago I lost the #5 speed on the fan. Ordered the part from your link, installed it last night and everything works great now. Man I love KZread!! Have a Great Summer! Thanks Again!
Thank you for this video, My 4 & 5 speed was not working. I bought the kit, swapped it out now it’s running perfectly.
@jonjacks1845
Ай бұрын
What did you do to fix it? I have the same problem... u bought just the resistor
Thank you so much for the info! Fixed my a/c today aside from the replacement not lining up properly, but I finally have operating a/c again!!
@TheSundaeDrive
3 жыл бұрын
Awesome! Glad it helped you out!
04 sierra exact same problem. Thank you for this video...just ordered using your link, It will be here tomorrow. Will update after install....
Just changed mine out on 2004 Chevy Silverado 3500 dually. Slightly different but your video was a great help. Thanks. My problem was incorrectly diagnosed but I changed out both.
Thanks for taking the time to help out the people!
@TheSundaeDrive
3 жыл бұрын
Glad to help!!
I liked that you showed the size of sockets to use the location of the screws and how the connector releases from the fan...nice job
@TheSundaeDrive
Жыл бұрын
Glad it helped!
Nice video. Helped me lots. Things to consider but please remember that my left arm is only about 70%. The passenger side seat rail digs into your side as you lay in the floor board. You really have to get your head towards the firewall to see the screws that hold the shroud. The plug that is inserted into the fan is the hardest part because you can't really see how it can be released. I had to use pliers. It was easier to bolt on the new unit and even plug in the fan wire. The best thing is that it works!!
Seems easy enough. Need to order one for my dad's Sierra. Only at speed 4 and 5 are working. So this should help. Had to switch out the blower motor.
This was very helpful. Thanks for being specific on where the bolts were and what size they were!
@TheSundaeDrive
3 жыл бұрын
Awesome! Glad it helped you!
"you'll feel it if you stick your finger in there" I fell for that once!!😂
@TheSundaeDrive
7 ай бұрын
Lol
Hey thanks a lot. Very comprehensive. All my fan speeds stopped all together. I should test for absence of voltage to the blower I assume?
Just put one in my 03 silverado. So easy, thanks for the video..
@TheSundaeDrive
3 жыл бұрын
Glad it helped!
Just so happened that my '04 2500 HD is experiencing the same problem. Great video, thanks for posting it. If I may say, and please don't hate me - the music in the background is distracting.
@TheSundaeDrive
3 жыл бұрын
Glad it helped! No worries. Always trying to balance the amount of music we use
I got the part and today I will install. I have my fingers crossed. It worked. The part went in backwards. Getting the clips in and out took the time. Without this video the installation would have gone from difficult to impossible. The people who install this kind of things really earn their money.
@TheSundaeDrive
3 жыл бұрын
Hope it works out!
@OSDCrusher
2 жыл бұрын
It would have been impossible to put in an easily accessible part held in with two bolts? LOL
@TheSundaeDrive
2 жыл бұрын
Naa they want you to have a challenge lol
@OSDCrusher
2 жыл бұрын
@@TheSundaeDrive once the plastic cover around the hvac box is removed it's literally two screws in plain sight lol. This guy said it would have been impossible?
@TheSundaeDrive
2 жыл бұрын
@@OSDCrusher ahh I misunderstood your comment. Been so long since we filmed this I forgot lol
Thanks for the very detailed video I'm going to try it in my truck. Hopefully it works
@TheSundaeDrive
Жыл бұрын
Best of luck!
Thank you for this. As it would turn out, the resistor installed on my truck was the one with the large rectangular pattern. However, I went ahead and installed this one that you suggested and everything works great. Hopefully it won't burn out.
@Alejandro-hi1lk
3 жыл бұрын
Did it burn out?
@EricStevenTerry
3 жыл бұрын
@@Alejandro-hi1lk Yes. I'm having the same problems now that I did before the fix.
@TheSundaeDrive
3 жыл бұрын
I would always suggest going with the correct one for your vehicle. Each year/model might have slight difference.
Great video man. Really helpful
@TheSundaeDrive
2 жыл бұрын
Awesome! Glad it helped
Dude. This made my day. Ordered Wednesday. Delivered Friday. Installed Saturday. Now have heat and AC again. All for 27$. Just the black and white wire harness is 32$ alone, and the resistor is 87$ at Napa. Napa also gave me the wrong one with different wire connect so would have had to splice and soldered. This was plug and play
@TheSundaeDrive
2 жыл бұрын
Glad we could help!
@officialteamun-wreckable9886
2 жыл бұрын
@@TheSundaeDrive I’ve changed my blower resistor cause the old one was getting burn… so I replaced it today and when I put it low speed it turn off and on the whole time… until I turn it up then it stops turning off and on. What could it be? If it has a new blowers resistor
The kit to replace the fan motor, resistor, and connector is only 82 bucks at Rock Auto. Its also OEM, not cheap junk like this. Even the OEM part shown in the video is only 33 bucks on rock auto. GM recommends you replace the motor, resistor, and connecter all at the same time, because the OEM motor draws too much power, causing the resistor to overheat and fail. the replacement kit solves the problem which causes the failure. I opted to replace all 3 at once using the kit.
@jayjoshjack8582
Жыл бұрын
Link?
@rebfan9200
Ай бұрын
Is the connecter, the wires he didn't use?
@Blue_Rose1973
Ай бұрын
Did it work? Have this issue now.
Well done! Thanks for taking the time.
@TheSundaeDrive
4 жыл бұрын
No problem! Hope it was helpful
@sean2299
2 жыл бұрын
@@TheSundaeDrive I have a 99 GMC Sierra I replaced my blower motor and speed 1 through 4 work 5 doesn't work
@jesusrojas5184
Жыл бұрын
@@TheSundaeDrive why are my cables purple and black
Great job on your video.
@TheSundaeDrive
4 жыл бұрын
Thanks! Hope it helped!
Very helpful! Thank you!
Yo thank you so much!!! I loved the basic and simple explanation and visual guide!!! Rock auto is always the way to go!! Also. Could you help me on my ac. It hums loud. 12345 used to work and now 5 works only. Trying move the position of the air is hit or miss. Mostly miss
Thank you great video , ordering it today . My heater has only worked on 5 for about 5 years haha. Thank you again.
@TheSundaeDrive
Жыл бұрын
Glad it helped!
@nathangraen404
3 ай бұрын
Mine too, did it fix it?
Exelent video thanks for the valuable information.
@TheSundaeDrive
3 жыл бұрын
No problem!
Awesome! I Loved your video, In my case only high speed works, I already change 3 times the resistor and it still not working. Other problem I saw is when I turn on the AC in the cluster sends a message " SERVICE 4AW". Do you have any idea what could it do? Thanks
Good info. Thanks. If I had to be picky, I would say that we couldn't hear the fan working in positions 1 and 2 because of your background music. I'm OK with intro and outro music, but I'd rather just hear narrative and actual sounds in how-to videos. Thanks again!
@TheSundaeDrive
2 жыл бұрын
good to know! Always torn because supposedly it makes them more enjoyable to listen to lol. We have not added it to most of our newer videos.
All my speeds work besides 5. I'll have to buy one and see if it works! Thanks stud
@base6535
3 ай бұрын
I have the same problem. Did this solve it for you?
Only my 5 worked, but this video gave me all the info to fix it. Thank you. Weird, but on the resistor itself 5mm was too big and kept slipping. 7/32 was the perfect fit. Whatevs
@TheSundaeDrive
3 жыл бұрын
Awesome! That's Interesting. I know sometime the do change bolt sizes from year to year
@jasonmendez7459
3 жыл бұрын
Same here only my 5 works
@austinjones5767
3 жыл бұрын
That’s good to know cause I didn’t know cause he said 1 2 3 I thought 4 would have been a different problem
Shop wanted to charge my brother 120 bucks ! I said Hold on let me check with YT and sure enough Bam ! Thank you very much .
2006 Chevy Trailblazer. Mine would not work on fan speed 5, so I replaced this resistor a month ago and all was well. Today it stopped blowing intermittently as I clicked through the speeds. By the time I got to work, nine were working. I am going to replace the control unit entirely, as I noticed the lights were going out on it, so I suspect this is the problem. If not, I will replace the resistor again. The one I bought from Amazon had hit and miss reviews. The next (if needed) will come from rock auto.
Question...my 06 GMC truck. Melted the fan speed dial a few years ago. This time. 1/2/3 quit working and now 4/5 speeds have quit too. Last time when the fan speed dial was replaced should the resistor module been replaced too (is that what causes the fan dial to melt?) Reason I ask is...I assume I need to replace the speed fan switch again but should I switch out the resistor too?
Great vid thanks!
On the MY03 2500 Silverado, there are different resistors, depending on Manual/Automatic temperature control and also presence of a front compartment center console.
Went from 1-4 working to absolutely none working. Perfect timing because it went out right at the hottest time of the year let’s go
@TheSundaeDrive
2 жыл бұрын
That stinks. Hope this fixes it for you!
@iiiiii7680
2 жыл бұрын
@@TheSundaeDrive I got it fixed, had to replace the wire harness and I replaced the resistor as well My wire harness connector was melted, so I was wondering why it wouldn’t come out lol
@TheSundaeDrive
2 жыл бұрын
Glad you got it!
Detailed stuff, bravo.
@TheSundaeDrive
3 жыл бұрын
Hope it helps you out!
@gmarmaduraexotics
3 жыл бұрын
@@TheSundaeDrive I need some other details. I searched your channel on the same vehicle. On my end Ac turns on 3 speed, but the air flow of cold air is very minimal. Tho air blows good, checking to see possibilities of issues.
I wonder if u clean the connectors and get all the crude out if it would work?
Thanks for the knowledge.
@TheSundaeDrive
2 жыл бұрын
No problem! Hope it helps!
Do you have a video on the dial??? Not sure if i spelled correctly
Would this fix one that sometimes will blow on all speeds then sometimes only blow on 5 and then they all may work besides 5? I am not good at explaining that just trying to get it figured out while it all still works lol
Mine has the wider insert- Amazon said this fits I installed it and speed 1 and 2 started working. One other issue, my fan mode is stuck in defrost I can’t get it to change. Any help?
Hey what if you put in resistor and it still clicks between 4 and 5
Very well done thanks
@TheSundaeDrive
2 жыл бұрын
No problem! Hope it helps!
I need the plug hook up schematic for wireing black and white to colored wire
What my 04 Sierra is doing is u go to 5 and it wont turn off unless u catch it to 5 again....u think its the module or resister??
Perfect I have ac again !!!! Thanks
@TheSundaeDrive
4 жыл бұрын
Awesome!
What if fan speed 5 didn't work but 1 through 4 worked? Then 4 stopped working a year later. Now it's intermittent if any speed works at all. Is this resistor the issue? Or should I replace the resistor and motor as well?
So I have two wires expose down there ones white and one's purple everything else is plugged up but my four and five don't work
So my 4 and 5 don’t work and my 3 is touch and go if I hit a bump the wrong way it’ll stop then go again could this be the same problem?
I have a 2005 Chevy Silverado and my fan doesn’t work on any speed what should I test what could that be any help would be great
I can control the fan speeds on my 2004 Silverado, but I only have hot air blowing out of the vent next to the glove box. The rest barely blow air and are the same temperature as the outside air. Any idea what the problem is? Thanks!
I have a 2006 Silverado 2500, the # 4 & 5 on the switch won’t work, is this the problem with mine??
Is it possible for the fan speed to be stuck on 0. I checked the fuses everything is good and I replaced the blower and still nothing
So what if just 5 dosnt work on my 04 chevy silverado whats the fix then.
On mine only speed 5 doesn’t work any suggestions plz?
I have a 2004 Chevy Silverado sometimes my fan dials work and sometimes they don't
Hey SD could you do a vid on your 2014 SILVERADO changing sparkplugs? Thanks.
@TheSundaeDrive
5 жыл бұрын
Sparks plugs are in the mail 😎 so video should be coming soon
My 4 and 5 doesn’t do anything. Any tips?
When I turn it off I still feel heat or air blowing out so I need to replace the blower moter or the resistor
Thank you I have heat finally
@TheSundaeDrive
2 жыл бұрын
Awesome!
I put new speed controller and resistor and still will not come on. The number 5 speed wouldn't work and then it just quit all together
Great 👍👍👍
how did you get that third screw out its at an angle in awkward place., that thing is a pain in the ass.
Mine that don’t work are 3,4,5 what is that mean?? Same thing??
This video helped really well and my speed 4-5 don’t work
@TheSundaeDrive
4 жыл бұрын
Glad it helped!
@MarcusTheDrummer
4 жыл бұрын
SyndicateOG24 So this did fix speed 5 not working. Cause that’s the issue I’m having, all work but speed 5. I have a 2003 GMC Sierra 1500HD. I’m gonna go to Oriley’s tomorrow and buy it.
@potlickerhound7262
4 жыл бұрын
@@MarcusTheDrummer did it fix fan 5 by replacing?
@MarcusTheDrummer
4 жыл бұрын
@@potlickerhound7262 Yes it fixed speed 5
@dcmuzic2023
3 жыл бұрын
@@potlickerhound7262 it didn't work for me. Number 5 dont work. I already installed it so ill just leave it there. 25 dollar mistake. Oh well. Now i gotta figure out the switch.
okay so i replaced it now everything is working but 5? what’s next? blower motor?
Good video man I have almost the same problem but in my truck the fan speed work 1 2 and 3 the 4 and 5 does it work my question is I have to do the same thing that you do
@georgeferrone1867
3 жыл бұрын
It works all 5 or not work
All the speeds work on mine but each higher speed drops the voltage on ammeter 4&5 take down to less than 12v
What about when my fan is turned to off and air still blows from the vents. All my speeds work fine. Thanks
@michaeldieckman6044
3 жыл бұрын
Your getting outside air draft most likely. My fan quit but I can get a little air to come through when driving. Switch to recirculate and will likely quit.
My #5 isn't working at all even replaced the resistor????
My 4 and 5 weren’t working (05 Silverado). Tried this and it changed nothing. May just have to live without 4 and 5 😂. Great videos though, man
@Steven-te5xe
Жыл бұрын
Have you figured out why it doesn’t work? Only my 5 doesn’t work
Any tips ? I’ve replaced my fuses , resistor , blower , still nothing comes out . Thinking maybe something in the control knobs ?🤷🏼♂️
@djlotussutol
2 жыл бұрын
My 06 GMC Sierra melted the back of the fan speed control switch.
HELP...my #5 went out a year ago, #4 was good enough for me. Now none of them work. Any ideas if it's not the resister ?? Thanks for your help.
@HorseGirl256
3 жыл бұрын
I think the only way to check is to have a look at what the current resistor looks like. If it looks cruddy, replace it and it'll probably be back to working. If not, its probably the HVAC controller box (the dials) which is also an easy fix.
@cameronfink4440
3 жыл бұрын
5 has a separate fuse that is a 30 amp in the engine bay while 1-4 have a 25 in the fuse panel in the cab. Might want to check that 30 in the engine bay fuse box
I have changed the blower motor resistor and have tried a different control panel but I still get no blower only on speed 5, could the blower motor itself be the problem
@GtPRiCH
2 жыл бұрын
Did you figure it out? I'm having the same problem
I replaced all tht and it dsnt turn off it stil stays on
4 speed don't work for awhile. Now 5 speed don't work. 1-2-3 speed still working. I'll try replacement resistor first. Hopefully it will work.
@willdunkin7053
2 жыл бұрын
Speeds 4&5 not working on my gmc yukon,did replacing the replacement resistor fix the problem for you?
Just FYI...my 04 Avalanche used 8mm screws to hold in the resistor.
My truck only works 1 2 & 3.... 5 used to work but not anymore. So it's probably the dial then
Thanks
@TheSundaeDrive
2 жыл бұрын
Glad it helped!
My resister did burn up on my 2003 chevy silverado. Only fan speed 4 out of 5 was working. I replaced it and 1,2,3 and 4 now work but 5 still does not. Also the green stick circuit board looking thing that comes out got really hot when I connected it. I was thinking since it sticks up into the air vent, that it what cools it. And because it was on and but the fan wasn't blowing, that is what made my old one burn up. Is that the case or should it not hot?
@wreyes1969
4 жыл бұрын
Hello i changed the resister because it wasn't working none of the speeds Now 1234 speeds works but 5 still not working is there anything that i need to do? To ge it to work
@wreyes1969
4 жыл бұрын
O sorry my truck is a chevy siverado 2006
@TheSundaeDrive
4 жыл бұрын
@@wreyes1969 I'm not sure. I need to do a little research on it
@TheSundaeDrive
4 жыл бұрын
I'm not sure why only the first 4 would start working. The placement is probably meant to cool it down in the summer and warm it up on the winter
Would this work if my 1, 3, 4, and 5 are out? Only speed 2 works for my truck. Thanks in advance
@VanirTraditionalist
3 жыл бұрын
Same here. Did you ever figure out the issue / fix? Thanks in advance.
@shimaspec
3 жыл бұрын
@@VanirTraditionalist yes just replace what he did in the video
I am waiting on my new resister to get here by ups
Replaced blower motor and resistor and and the control switch still no power to the front heat and ac
Thank You!
@TheSundaeDrive
2 жыл бұрын
No problem! I hope it helps
@BigShark700
2 жыл бұрын
You were spot on.. I had a hard time finding what the problem was and you hit it right on the nose.. I would've chanded out the entire fuse assembly if I didn't catch this video 1st 🤣😂👍
@BigShark700
2 жыл бұрын
Thanks again! You're my hero and I really appreciate it.. Your patience and clarity is why I would tune in.. Definitely liked and subscribed 💯
@TheSundaeDrive
2 жыл бұрын
Awesome! Glad it helped :) appreciate the feedback!
The blower has a bearing it starts to fail then starts to draw more amps. Then it start to melt the terminals and resistor. So it's important to change both blower and resistor as a pair.
@TheSundaeDrive
Жыл бұрын
Good point!
Thank you sir just bought a 06 crew cab Silverado and the 5 position doesn't work. This will fix it god bless 🙏
@TheSundaeDrive
3 жыл бұрын
Glad it helped!
@Gtag_thagoat
3 жыл бұрын
4 and 5 didn’t work on mine changed the resistor and now 4 works and 5 still dont
@catchickenchic
2 жыл бұрын
@@Gtag_thagoat people were saying to check the fuses
For anybody wandering speed five does not work in my 2005 GMC Sierra 2500 and the little wiring harness that comes with the kit he showed on Amazon was melted so it is still the fan speed resistor
@TheSundaeDrive
2 жыл бұрын
Thanks for that info!
4th speed is the only one that doesn’t work on mine could it still be the fan speed resistor or something else
@TheSundaeDrive
2 жыл бұрын
definitely could be.
What if they all don’t work but the heat stays on
On my 2005 GMC Sierra the module screws were 5.5mm.
@thefurnus
2 ай бұрын
Same as mine on 2003 Silverado
Big help...Thy,Thy
@TheSundaeDrive
2 жыл бұрын
No problem! Best of luck with it!
says it doesn’t fit 2004 chevy silverado 1500 crew cab full 4 door LS edition
@TheSundaeDrive
2 жыл бұрын
You could double check with a gm dealer because sometimes compatibility lists on websites our incorrect.
I have an 2005 Silverado 1500 ext. cab long bed and speed 1 and 2 work fine..its the other faster speeds that don't work in my case.
@laloperez5209
3 жыл бұрын
I’m having the issue right now did you figure it out?
@kaylamarie8309
3 жыл бұрын
@@laloperez5209 Watch this persons video for sure to see where things are in the truck..In my case I pulled the fan speed blower motor resister out from under the passenger side underneath the glove compartment area to inspect it. You can see the housing for it with no problem once you know where to look. When I pulled mine out I noticed that there was some burnt/melted wiring evidence on the wiring harness for the resister and upon removing the old part from the harness I saw that the wiring harness was melted significantly on the inside where the pins went into it..specifically the pins that controlled the fan speeds that were not functioning. I bought a new wiring harness from O'rielly's Auto Parts and cut the old one out. it was easy to replace just by splicing in the new harness based on the old wires orientation. Just refer to the old harness and hook up the same way. I replaced the resister unit as well just out of caution as I figured it was likely an OEM part and bound to fail sooner than later anyway. After replacing the parts the switch that controls the fan speed works flawlessly on all speeds. Complete repair was less than a hundred bucks. Far less than having it done elsewhere I'm sure. Hope that helps.
@TheSundaeDrive
3 жыл бұрын
Thanks for the detailed response!
@kaylamarie8309
3 жыл бұрын
@@TheSundaeDrive My pleasure..happy to help :-)
Mine works 1-4 but not 5?
Mucho mucho good 👍
@TheSundaeDrive
2 жыл бұрын
Thanks!
Mine works on speed 1-4 but not on 5. Same deal as this video?
@TheSundaeDrive
2 жыл бұрын
If you look through the comments, there are a few others that have had this issue and I think it fixed it for them.