You sir, saved me a bunch of time and having to take it in to a mechanic. Thank you.

@uncledrew9062

Жыл бұрын

Yes

Wish I would have watched this video first. Explanation on Fan orientation is very helpful. I wasted a lot of time trying to get it back in, not knowing were tab lined up. And first video of blender actuator I've seen. My next project. Thanks.

Best video I seen well explained thanks!

Thanks a million. Had my fan quit yesterday. 99° in Arizona and it's not even summer yet. Fixed in about an hour. Very happy.

You have the best video on the subject I have seen. I had to replace the wiring harness that you showed. but the disassembly You showed. made my project easier. Thanks'

Thanks for the video. I'm working on a 2005 1500. Same issues. The blend door doesn't function, the resistor is rusty and only works if you wiggle it and no voltage output on speed 5, the updated harness that I put on like 10-12 years ago is melted again, the blower motor doesn't spin even if jumped to full 12 volts. I'm going to order all 3 parts as mine are bad. Thanks for the awesome video!

@GEROW1963

2 жыл бұрын

Iet me know when you get # 5 speed fixed

Thank you sir, you was direct, made sure we understood every word and action you took I really appreciate your time for doing this

Thanks for the detailed help, now I have heat again, I ended just needing the blower motor but thanks to your help I was able to diagnose and fix the problem myself

On my 06 2500HD 6.6 with the digital auto A/C I had to replace my 3 pin Resistor plug with a 5 pin model. Auto parts store doesn't carry the three pin model, only the 5 pin CONVERSION. I had to cut the old plug off and splice in the new 5 pin that took the hardwired 2 pin connector and added it to the 3 pin making it a single 5 pin connector that had the 2 pin branch off from the connector to go to the blower motor. Still has an aluminum heat sink but has a 5 fin from the factory 2 fin design.

Thanks 🙏 for shearing this video I have seen a lot of them on this subject but I found this one to be the best help to my Silverado 1500 ! Thanks again, I will be watching for great video’s for you

Video helps me out a lot, thanks. Years ago when I was younger I changed a blower out on a older chevy and it was sideways facing the front of the vehicle and extremely hard to get to. This looks a little easier. I hope.

Great video and explanation on function. I quicky rigged a resister actuator years ago and just had to get another. Apparently last time I had to cut and change the harness to fewer pins but now, naturally, i got another larger pin eet up. Typical. However, this vid inspired me to change the blend too. Thanks.

great video. good detail and took the time to go thru all the steps was a huge help to changing out motor on our 04. Many Thanks

Very helpful, giving me the confidence to do it myself!

Excellent video, very well photographed and explained. I have similar problems with my 2005 2500 HD 8.1 litre engine, 6 speed manual transmission. Going to replace same 3 parts.

@uncledrew9062

Жыл бұрын

Yes

Perfect! Tool sizes is very important to me.

Good video and detailed as well

Thanks a bunch, blower motor died in our work truck no a/c in 100+ California summer.

Glad i could help

Thanks u helped me out today thank u

Very good thank you

Great, helpful video.

Excellent video thank you , but you did have your counter clockwise and clock 🕰 wise backards

@rkshell1975

Жыл бұрын

Dang it. Glad it helped you tho.

It’s 7mm bolts. GM is metric on most all bolts

What Set up is this on Amazon an you done a great job

I bought some off Amazon what time and it didn't work. It gave me more problems so I went back to the OEM.. and he was cheaper to get the OEM for the blower motor and the resistor

Diesel. I was going to ask. I have an 06 Duramax and my blower squeals only when it is really cold.

Me puedes dar los nombres de las partes yo tengo una 2005 y tengo problemas con el abanico

7mm socket these trucks are made in Canada

How did you switch speeds

@rkshell1975

Жыл бұрын

I'm not understanding your question

@uncledrew9062

Жыл бұрын

@@rkshell1975 You said you turnt it up to 5

What is he actuator for?

@rkshell1975

Жыл бұрын

The actuator moves the blender door which causes it to blow hot or cold air

www.amazon.com/dp/B074HTW9KS?ref=ppx_pop_mob_ap_share

Replacing the cabin air filter would have also been duck soup EZ while you were there