How to build the best DIY cable fly attachment with adjustable quick connect adapters!
In this video, we're going to show you how to build the best DIY cable fly attachment for your fitness Reality 810xlt Super Max Power Cage or any other cage with a rear lat pulldown attachment for that matter.!
This cable fly attachment is perfect for adding extra resistance to your workouts, and it's extremely easy to make. I'll show you how to install the quick connect adapters, and then I'll show you how to use the DIY Carrol Fly attachment to add extra resistance to your workouts.
This DIY cable fly attachment is a great way to increase your fitness by adding extra resistance to your workouts, and it's a great option if you have a home backyard or garage gym with a power rack and lat pulldown attachment. If you're looking for a great way to increase upgrade your home gym you should definitely watch this quick connect video along with the DIY Carroll Fly video I put together for you all. I hope you like em! Love and peace everybody. Out!
These are Amazon Associate program links and I will receive a small percentage of income from your Amazon purchases. Thank you for your support, Vern.
100LBS Swivel Swing Powerful Magnetic Hooks(6Pack) Black Magnetic Swivel Hooks Heavy Duty Magnet Hook Magnetic amzn.to/3FnUVfJ
Sunny Health & Fitness Power Zone Strength Rack Power Cage amzn.to/3TSpdeH
Fitness Reality 810XLT Super Max Power Cage | Optional Lat Pull-down Attachment and Adjustable Leg Hold-down amzn.to/2LmIiZ5
Fitness Reality 810XLT Super Max Power Cage | Optional Lat Pull-down Attachment and Adjustable Leg Hold-down | Power Cage Only amzn.to/37nsrSo
ASSAULTFITNESS Assault AirBike Classic amzn.to/3QhDPDT
SpoxFit Adjustable Weight Bench, Full Body Workout Bench for Home Gym
amzn.to/3XyKwox
PowerBlock EXP Adjustable Dumbbells, Stage 1, 5-50 lb. Expandable with Expansion Kits amzn.to/3V8TqaN
Bowflex SelectTech Adjustable Kettlebell amzn.to/3OAB1Ba
Tribe-Wod Cerakote Barbell tribe-wod.com/products/barbel...
Fitness Reality 2000 Super Max XL High Capacity NO Gap Weight Bench with Detachable Leg Lock-Down amzn.to/3aD9fR0
Fitness Reality 2819 Attachment Set for 2"x2" Steel Tubing Power Cages amzn.to/2LzaYhk
Fitness Reality Extended 9" Olympic Weight Plate Holder for 2"x2" Tube Power Cage amzn.to/3drLRc1
Fitness Reality Landmine 360 Degree Rotation, fits 1" Standard & 2" Olympic Bars amzn.to/3ae8tLT
Body-Solid 8" Olympic Adapter Sleeve for Standard Posts amzn.to/2RdiNMr
Пікірлер: 92
Vern!!! This a great addition- the versatility and the quickness will boost a workout and keep things moving more efficiently in a home gym workout!!😎😎😎
@UsawaFitness
Жыл бұрын
I had a workout elf show me the way in this one! 🤣 Thanks Carroll!
@carrolllindler9348
Жыл бұрын
@@UsawaFitness you’re welcome Santa!!!
Thank you again for the document for the Carroll fly build! God bless.
@UsawaFitness
11 ай бұрын
You're welcome and God bless you too!
THANKS so much for doing this video. These easy connects will hopefully do what I am so desperately needing..
@UsawaFitness
Жыл бұрын
You are so welcome!
Vern!!! Having these quick connects are simply brilliant 🎉 Cheers!!!
@UsawaFitness
Жыл бұрын
Thank you! It does make it quick and I don't think you really need the other eyebolts.
The best diy system on youtube Great easy , and cheap Congratulations for your vidéo Thank you
@UsawaFitness
Жыл бұрын
Thank you!
Nice video. Been following you for a minute and I love this diy hack. No joke, I think you should make these quick connects and sell them. I got the Fitness Reality Power Cage and could use these quick connects, I just don’t got the time to buy and make everything. Good stuff, man. Keep up the solid video content.
@UsawaFitness
Жыл бұрын
Thanks man I appreciate the support here in my channel. I was thinking about making them and selling them but that little piece that holds the cable in place looks a little unprofessional because it's sanded down and I'm not sure if people would be out off by that. I might try it though.
This is nice. Love the DIY video.
@UsawaFitness
Жыл бұрын
Thanks man!
Awesome setup!
@UsawaFitness
Жыл бұрын
Thank you!
This is a great idea!
@UsawaFitness
Жыл бұрын
Thank you!
I like this cage more then the other one 💪💪💪💪
@UsawaFitness
Жыл бұрын
I was wondering what you all were going to think about these two cages!
thank you,it's helpful to me.
@UsawaFitness
11 ай бұрын
Glad to hear that! 👍🏾
This is exactly what i was looking for, love the quick release bolts ideal for what i need. Overall great idea, don't need to be pay for a 1000+ euro/dollars for a bulky machine to do flys and most people with home gyms have small spaces to work with so great way of saving space.
@UsawaFitness
6 ай бұрын
I love it! It's a great addon! 💪🏾
@UsawaFitness
6 ай бұрын
I'm glad you like it!
Yo this is brilliant homie. I'm thinking about gettiing a cage and was wondering if i could add pulleys when i came across your video. Gotta say I'm all about finding clever efficiencies... & I have to tip my hat to you sir 😏 way to innovate.
@UsawaFitness
7 ай бұрын
Man I wish I could take the credit for this one but one of my subscribers came up with it and I just put it together but I'm glad I did! It's a perfect solution. Thanks for watching!
@3gypt
7 ай бұрын
Aye teamwork makes the dream work brotha! @@UsawaFitness keep doing what you're doing
@UsawaFitness
7 ай бұрын
@@3gypt ☺️ Thanks man!
Great video! Do you have links for the cables/pulleys you used? And roughly how much cable did you use? Thanks!
@UsawaFitness
Жыл бұрын
I'm so sorry. I'm slow dragging on getting all the notes together for you guys. I'm going to try to get it done ASAP. I've just been behind on my website and posting my videos so I haven't had a chance to compile everything.
@Whitetail_Properties
Жыл бұрын
@@UsawaFitness No worries! I appreciate the response, I will keep an eye out!
This is awesome! Thank you for posting my man. Where did you find those small eyebolts from?
@UsawaFitness
2 ай бұрын
Menards. I have a Google doc I can send you if you want it. Just email me
@JimBrownell-qn4ju
2 ай бұрын
I found them and they came in and work perfect thank you!! This is badass my man.
@UsawaFitness
2 ай бұрын
@@JimBrownell-qn4ju You're ultra welcome man. I'm glad you got yourself all setup! 💪🏾
My man !!amazing guide . Im having a hard time trying to find the Lat pulldown for the fitness reality cage ( it goes from $170 and up ) i only paid $100 for the cage 😂. I tough about buying the one from Balance form for $80 and see how to adapt it .
@UsawaFitness
3 күн бұрын
@@mikemazzi226 Thanks man! You should check and see if Amazon has a prime day deal on it.
@mikemazzi226
3 күн бұрын
@@UsawaFitness I will check it !!!
Love this design. What length of cable did you go for?
@UsawaFitness
3 ай бұрын
14 Feet! I have all the instructions if you want them. Just email me.
I’m using a Titan T2 rack with extended plate holders and a lat pull down.. I have a similar setup but my eye bolts have 2 nylon washers and 2 stainless washers front and back .. instead of the quick disconnect I use Butterfly Nuts .. the nylon and the stainless steel washers are glued with a drop of crazy glue and the other end it’s glue with the Eye bolt , its fairly quick to connect and disconnect.. the nylon washers are used so the rack doesn’t get scratched
@UsawaFitness
10 ай бұрын
That's the same reason that I use the nylon washers. Send me a picture of your setup man! I can show it to the community here as an alternative. 💪🏾
I love your video. Would you happen to have a guide or the stuff needed that you could email to me. I want to do this to my cage. Again, great and helpful video
@UsawaFitness
28 күн бұрын
Of course! Email me my address is right there on my landing page at the top right! I have a document that I can send you.
@tanikacuffee9335
27 күн бұрын
Perfect! I just sent the message to you!
@UsawaFitness
27 күн бұрын
Check your email and let me know if you have any questions. 💪🏾
You have a lot of clients
@UsawaFitness
Жыл бұрын
I'm trying 😄
Would this DIY work for the 810xlt super max power rack. I think it would but just making sure?
@UsawaFitness
Жыл бұрын
Absolutely. 100% I'll be using this one of my fitness reality 810xlt super max power cage once it's warm enough to train outside.
❤
@UsawaFitness
6 ай бұрын
Thank you
@christinegonzales6715
6 ай бұрын
Welcome
You're a MacGyver genius dude. Haha.
@UsawaFitness
Жыл бұрын
Thanks Norm!
What is the name or part of the bolt inside the wheel pulley? Appreciate the video
@UsawaFitness
Ай бұрын
Samsung Wall Mount Adapters for UN32J4500AF BN96-18153A BN61-07259A
What are the sizes for the eye bolts that you used for both cages?
@UsawaFitness
Жыл бұрын
This exact part number will work on both cages. I'm sorry for the slow reply. I lost the package for a few days. www.midwest-fastener.com/midwest-fastener-3-8-16-x-3-1-2-coarse-thread-male-rod-ends-80469-bolts/
After building the quick connects and discovering some of its shortcomings I have decided to improve on them in a few ways. One is a must have and that is putting a 3/8” 2in steel washer behind the rubber one. The other day, the quick connect came flying through the 1 inch hole of the fitness reality cage. The washer you have behind the 2in rubber washer is too small and will get pulled through once the rubber washer has had enough. Second the cheap plastic tubing from ace got all tore up and needs to be replaced. I’m going to replace it with 3/8in pex type b tubing. Lastly I’m going to experiment with adding some stainless steel D ring shackles with “no snag pin” to make it easier to connect the carabiner. Just have to make sure it fits through the 1in cage hole. All of this does add to the cost but as it is now, it’s unusable if you want to protect the cage and minimize noise. Overall they have been such a great add. Thanks again!
@UsawaFitness
2 ай бұрын
Nice job! I think you might have skipped the part at 6:14 where I added that second washer. That what is the one that holds the quick connect in place and prevents it from coming through the hole. Nice work making it your own though. Have fun!
@lawrence09151
2 ай бұрын
Crap I used the smaller washers. I followed the guide emailed and used the same smaller washers for everything including the cable fly. It didn’t specify to use a larger washer but I should’ve known. Thanks Verne!
@UsawaFitness
2 ай бұрын
@@lawrence09151 it's all good I definitely didn't spell that out for you guys in the video. I need to update these videos because I found a way to build these without all of the extra tools in the first video.
Thanks. Very helpful content! 👍 and sub.
@UsawaFitness
Жыл бұрын
Thank you! I appreciate that!
Vern. What’s the size of the eyebolts for the quick connect for the Sunny Health Fitness squat rack
@UsawaFitness
11 ай бұрын
You can order those from Menards. These are the only ones I could find that would fit that were strong enough for what we're doing so they were expensive. Midwest Fastener® 3/8"-16 x 3-1/2" Steel Threaded Pin - 1 Count Model Number: 80469 Menards ® SKU: 2020010
hey! do you have links for everything needed for this setup? Would appreciate it a lot
@UsawaFitness
11 ай бұрын
Email me and I'll send you the word document
Do I still need to install the samsong nuts ? I can’t find any here on my place 😅
@UsawaFitness
Жыл бұрын
Yes you want those to keep the cable from coming out. They are on eBay.
Can you put the links to everything? Don't see in the description.. thanks!
@UsawaFitness
Жыл бұрын
Soon sorry for the delay.
I've been trying to add this to a rouge monster lite squat rack with has 5/8" holes and legs that are 3" wide. I can't find an eyebolt that is small enough to fit into the holes and it long enough to stick out of the other side (would need to be about 4") has anyone had any luck finding eyebolts of this size?
@UsawaFitness
Жыл бұрын
I think you can get one from Grainger
Where do you get the eye bolt that you used? I dont see it in the list
@UsawaFitness
4 ай бұрын
Midwest Fastener® 3/8"-16 x 3-1/2" Steel Threaded Pin - 1 Count Model Number: 80469 Menards ® SKU: 2020010
Hello. Can I have the links to the cable/pulleys used?
@UsawaFitness
9 ай бұрын
Of course. I have a complete parts list document I can send you. Email info@usawafitness.com and I'll send it to you.
What brand are those j-hooks
@UsawaFitness
10 ай бұрын
Those came with the Cage.
Has anyone found a center eyebolt that will pass thru? 810xlt
@UsawaFitness
Жыл бұрын
This is the part that you need. www.midwest-fastener.com/midwest-fastener-3-8-16-x-3-1-2-coarse-thread-male-rod-ends-80469-bolts/
Is there a list of parts?
@UsawaFitness
9 ай бұрын
It's not crazy. I can send you the document. Just email me at info@usawafitness.com and I'll send it to you.
What’s your email ?so I can get a list of supplies needed to make this. This is genius.
@UsawaFitness
Ай бұрын
info at usawafitness is right on my landing page at the upper right
@StarrixFit
Ай бұрын
@@UsawaFitness awesome! I just submitted!
Here is how I did mine kzread.info/dash/bejne/p55s1Kd7YrzPqKQ.html
@UsawaFitness
Жыл бұрын
Nice job!