PAY IT FORWARD . . . Please help me keep all my resources FREE for everyone to learn from and use. DONATE any amount here www.paypal.com/donate/?hosted...
Жүктеу.....
Пікірлер: 121
@santiagovaldes94293 жыл бұрын
Great, great, great! This helped me mount a 335/80r20 tire on 12.5 x 20 rim. Thank you so much!
@robr57864 жыл бұрын
When I got sent to the shop to help the mechanic do semi tires he used this,yrs later I tried to buy some and explained how it worked at a local parts store,they looked like I was nuts! I couldn't remember the name and was looking tonight on the net and came across this video,thank you!
@andrewkennel26414 жыл бұрын
You know most of the people that can't stand the "extra audio" are just frustrated because they are sitting on that demon tire that won't seat sweating profusely and probably bleeding as well. I'm feeling that pain too...haha. Good trick, I would rather try this than ether if I had a choice, Thanks!
@ccrider779 жыл бұрын
The video and advice was great. The background comments from the peanut gallery, not so much...
@rodneybrand8521
7 жыл бұрын
Chris C. is this a joke ???
@gasdude5153
6 жыл бұрын
not funny childish
@Tony-ib2vm
3 жыл бұрын
Spoken like a true $14/hr tire tech who can't afford sticky rubber or power...
@danbrewer17182 жыл бұрын
Just found this video and it worked like a charm. Thank you so much!!
@grand73am11 жыл бұрын
Thanks for the tip! I wanted to get the Murphy's but nobody had it in stock, so I found a similar product called Euro Paste by Ken-tool, at my local NAPA auto parts store. A bit messy, but was easy, and enabled me to get the job done today. It didn't cost much for the paste. Eventually I'll get one of the bead seater air tanks, but didn't want to wait or spend the $100 for the tank right now. Thanks again.
@67mmek Жыл бұрын
Thanks, got a stubborn bead seated doing this way!!
@paullasmith49754 жыл бұрын
Absolutely loved the audio add-ins! Simple video, simple explanation---now I know what to buy! Thank you!
@jerrywestonjr37694 жыл бұрын
This worked! Putting this on heavy definitely did it for me. The lip of the tire wasn't lubed enough to go over the rim so it was sealing funny. I put some thick scoops of this on and got the pop I was looking for. Thanks Boss!
@dmorley10014 жыл бұрын
You never cease to amaze, Mr. Mariage. I've never seen or heard of that trick before.
@Danman40003 жыл бұрын
Great Idea! I don't have any Murphy's but you gave me the idea to try squish up all your old bars of bath bath soap and save them in a little jug. or syrup might dry and seal up small leaks on my tractors!!
@protectyourassests10283 ай бұрын
This worked for me when I installed all terrain tires with strong side walls.
@lou-lousdaughter43104 ай бұрын
Granted that you made the video 13+ years ago but I love the background side effects and commentary- Classic
@eddiesheeran57913 жыл бұрын
Great tips, thank you sir! I'm battling a stubborn ATV wheel and tire right now. I thought I got it last night because the bead fully seated and the tire held air for hours. I looked again this morning, and the bead had come off again on one side. I'm going to find some of that tire goop and give it a try.
@briansmobile18 жыл бұрын
1:35 "Oh so that's what's happen'n huh?"
@vicpetrishak1077 Жыл бұрын
I dilute my Murphy’s tire soap with water to get a consistency of a thick liquid . Using a spiral paint stirrer chucked into an electric drill works well . I use this solution on 22.5 truck tires . Nice tip !
@johnlagreca62885 жыл бұрын
This guy is my kind of person! Thanks for the vid. I'll save the ether for starting my diesel now, haha. Bead blaster, bah!
@idiether2 жыл бұрын
This is a method we’ve been using at my family’s tire shops since before I was born but with the machines , cheetahs and tools it’s not really common method anymore and I’m really happy to have seen this again! Customers used to give us hell when they saw one of the guys doing this hahahaha
@SCFY085 жыл бұрын
Awesome and loved the sound affects
@lanceuppercut61685 жыл бұрын
2:27 Right in the eye! XD PS: Thought the color commentary was kind of dumb but this part right here brought me around :P
@jean-pierreharrison54078 жыл бұрын
Couldn't find Murphy soap but GoJo worked a treat.
@mbnghlooper43385 жыл бұрын
love the sound effects!
@ericthecarguy14 жыл бұрын
Looks like good clean fun.
@studpuppy6914 жыл бұрын
Cool trick. Most people, not me, will use starting fluid. Of course if you do this alot a Cheetah bead seating tool works great! My favorite method.
@lisajonas56466 жыл бұрын
Thanks, great video!
@vicpetrishak77055 ай бұрын
Murphy’s tire soap is a very good tire lubricant , the best ! Mix up a small batch adding water and mix with paint stirrer with a drill motor . The consistency should still be thick enough when applied to stick well ! I use a welder’s glove to apply , the gloves will last for years ! I change truck tires once in a while .
@yobigbrotheronline8 жыл бұрын
The people who make the soap say that once it has been used you cant put it back in the bucket and use it again. LoL !! I really enjoyed this and the sound effects.
@marshaul
7 жыл бұрын
Of course you can't! Then you wouldn't be buying it 10x as often.
@8307c43 жыл бұрын
LOL that's an easy one, I wouldn't have needed this video to teach me basics, I have one has a gap 2-3 inches wide all around...
@east587110 жыл бұрын
@Mike Onnels - maybe the reason someone uses Murphy's Oil soap instead of a Bead Bazooka is the Murphy's Oil soap doesn't cost $250!! Unless you are doing this all day long it's hard to justify a BB for one offs. But thanks for the comment because I had never heard of a Bead Boozka.
@slvalleyboy3 жыл бұрын
Murphy's soap does work. Used it a few times before I got hold of a ratchet strap, only I used the liquid type and had to let it set up and kept applying layers until it firmed up. It still worked.
@genesisbatam5 жыл бұрын
Loved the video, laughed my ass off
@tuxnoel5 жыл бұрын
Just put shampoo water. Push tire radially in while pumping air without valve core. And keep your fingers aways from rim tyre-joint area when bead seating.
@Viris01012 жыл бұрын
are you using a regular air compressor and without taking the valve stem out for that burst of air?
@DANIELRODRIGUEZ-tl9ue6 жыл бұрын
Great info
@milleniumann2810 жыл бұрын
what a lot of people don't understand is a bead seater will seal most tires not all. tall truck tires 11r's not stored standing up become skinny tires on a 24.5 rim. I use bead seater than starter fluid then this soap, soap last because that starter fluid may pop the tire off wit that slick soap on the bead.
@daviddad7 жыл бұрын
As mentioned, video and instruction R great. Background comments, a few too many too much...
@jobertcadag151811 жыл бұрын
i've seen that thing done on my five tires but the technician used a 4 inch paint brush to apply that grease like thng. so the grease like thing is for sealing the tire temporarily til the tire beads
@LT1HILLINGHOE11 жыл бұрын
That's my point....a tire that is too large is where starting fluid comes in very handy and is the best way to go.
@bigjohnson561914 жыл бұрын
Thats a new one, thanks...
@michaelmolter61802 жыл бұрын
I've got a different problem. My tire holds air fine, but I can't seem to get the bead to snap evenly into the rim! Happened on all four new tires I tried to put on. Even aired them up to like 50 psi (max allowed according to label on sidewall). What do I do? Take them off, de-bead and try again?
@Northernstar937014 жыл бұрын
I thought the sound effects were cool! I have one thought though, If it doesnt want to seat down properly it would be a rough surface on the rim I would think? I like to take a brown scotch brite Roloc wheel on my right angle die grinder and polish up the rim surface if it's rough like that. The soap idea does work good though, I've used similar stuff in tough cases. Good vid as always!
@guynextfloor11 жыл бұрын
That's the idea, if you don't have Murphy's tire soap you can use just about any thick compound that will offer just enough resistance to air to get pressure to seat. If you have a bad bead better use a urethane based caulking goo.
@lightwind100010 жыл бұрын
awesome......
@guynextfloor11 жыл бұрын
Fire is also handy for emergency field reseating of low-pressure loader or tractor tires that come off the rim during work (if you have a 12psi tire eventually it will get down to pop-off point. Most of the time those tires are too large to seat on-the-spot with a compressor-driven reseater
@arjunahawaii7 жыл бұрын
Background shenanigans detract from video
@stevietheg258014 жыл бұрын
most tyre shops i know of 'paint' the soap on with a brush before installing the tyre on the rim then blast it with air, pops right on!
@FalconFlurry6 жыл бұрын
I got to the garden hose step, but my garden hose is frozen solid. What do I do?
@CCTECH7514 жыл бұрын
Carefull using this, it is very slick, I have seen tires turn on the wheel , this can be very scary then you come to a fast hard stop. (Wheel Stops tires Don't) No Fun.
@TheHikering6 жыл бұрын
The fellers at Big O Tires in CA. couldn't get my replacement tire to bead.. Watching 3 guys and a gal. using multiple air hoses on It.. I spent most of my day waiting. She said come back in the morning and It will be ready.. She said the tires were too cold to bead. huh. the first thing i thought of was Big O Tires shouldn't sell cold tires?
@charredskeleton
5 жыл бұрын
Tire tecs are a special bunch. Thats why I do my own. I find less damage is done to my car this way.
@ilovemyevo5565 жыл бұрын
So the idea is to stop the slow leak so the air can get passed it into the broader portion of the tire until it then fills up and forces the inside of the tire to expand to the rim.. i bet peanutbutter would work.. or an soap lubed garden hose that would then be pushed out as the bead seated.
@WesSeid12 жыл бұрын
Nice. I'd be a little worried about where my fingers were in that video, though.
@josephr41066 жыл бұрын
Had one bought new tires for explorer going on trip so mounted the old ones on my pu that only used local. I failed on 1 tire shop blaster failed put tube in not too long after tire completely failed belts twisted .although it held air probably the tube held
@jonchatt7173 жыл бұрын
Works great just be careful, got shot in the eye with safeties on and got some up my nose😂
@PraveenKumar-qx2ks4 жыл бұрын
Thank you sir it is really working, I used Greece and success 👍
@Tony-ib2vm3 жыл бұрын
Also you can over charge, when the customer returns for numerous vibration problems, since the tire will spin on the rim the first time they brake or accelerate aggressively, throwing the assembly out of balance...
@39knights5 жыл бұрын
Money shot at 2:28. Is it wrong that a tire video got me excited???!!! :-)
@charredskeleton5 жыл бұрын
Put the valve core back in and bounce the tire on the floor. That bead would have seated by bouncing in 1/2 the time not counting your clean up.
@jimisback13 жыл бұрын
Yes she can play too, if I can apply the soap. J/K
@pepeltoro5412 жыл бұрын
suean interesante. pero tambien con un poco de plastilina o algun tipo de hule sintetico. puede sellear en los lados cuando la llanta perdio un peadzo de linia saludos
@bobadork9 жыл бұрын
thought this was gonna be dry until I heard the great sound effects
@LT1HILLINGHOE11 жыл бұрын
Only time you need to do that is when you're mounting a narrow tire to a wide rim or a huge tire (ex. 11 r 24.5) that is very hard to handle. This procedure here seems best for this type of tire.
@milleniumann2810 жыл бұрын
fyi im not doing all three at the same time if one don't work I try the next.
@tedelliott87345 жыл бұрын
I have used grease but I think the soap would be better.
@joolibyrd7 ай бұрын
Can u do it while the tire is on the car?
@realfixesrealfast
7 ай бұрын
No, at least I would not
@brendaneagan695911 жыл бұрын
neat trick but i got one better its called starter fluid and a blow torch this also works on the car, like a junker that has sat so long it lost its bead. Jack up the problem wheel blow out debris from bead land depress sidewall and shoot a bit of starter spray or hair spray into tire be ready with air to chase the pressure exerted by explosion inside tire when you ignite the fluid you just sprayed. but i would not recommend that to a 5th grader who is the target audience judging by the soundFX.
@snappyone4 ай бұрын
could you tape over the space with duct tape?
@isuckcsgo70256 жыл бұрын
YEEahh!
@sojer6mile12 жыл бұрын
That tire machine is older than he is. They sell a thing called a cheatah its a tank u fill with air and it has a neck that comes out to the tire shooting 200 psi of air in half a sec no clean up
@charredskeleton5 жыл бұрын
Or a Cheetah. You could use a cheetah. A shop should have a cheetah. There's off brand ones on ebay for cheap.
@patelsafu362 жыл бұрын
Can I us grees?
@normanwells27559 жыл бұрын
Still have all your fingers?
@carlthornton3076 Жыл бұрын
Very Good!... #115 ✝ {6-29-2022}
@AutoTechHector14 жыл бұрын
It's Murphy's Law until you use Murphy's Soap...
@prayforthe_1644 Жыл бұрын
Seen people use bike tubes respective ti rim size
@danielpadilla94229 жыл бұрын
Nice, but I'm gonna tie my tire let it heat in the sun and cinch it first then lube it. Good video, but the soundman savaged you.
@rs21436 жыл бұрын
KEEP THE FINGER OUT OF THE BEAD IF YOU WANT TO KEEP THEM ! Ouch
@alloutofdonuts39983 жыл бұрын
I thought the dubbed comments were funny lol. I got an ATV tire that won’t seat about 4” along the bead. It’s aired up and sealed, I went to 40 psi and it wouldn’t seat. I tried breaking the bead again, added spray soap several times and it still won’t f*ckin seat lol. I have some bead sealer I might try to break the bead completely on that side, add the sealant, & try to seat again. Any other suggestions??
@GarryReyom6 жыл бұрын
It’s kinda like Mystery Science Theater 3000 but for KZread
@Nodangenz12 жыл бұрын
крышечку бензина вовнутрь и спичку... баллон наденется от воспламенения...
@TheGuyInTheLoo8 жыл бұрын
yeah i probably would of used a stick applicator instead of my fingers ;o)
@Laffy1345
6 жыл бұрын
Leo Shakur 😂😂😂😼😼😸😹
@Gdavis2nd11 жыл бұрын
Petroleum jelly works perfect too!!
@GriffinBuilt
5 жыл бұрын
Gdavis2nd serious
@prodigy121014 жыл бұрын
Whats up with the sound effects? lol
@SuperBC103 жыл бұрын
It’s just a soap so you can just wash it off.
@Dan062212 жыл бұрын
It's like you got a 12 year old to edit the video over with a soundboard.
@tytraulich49872 жыл бұрын
I bet that stuff is 43$ at my auto store
@garysmart18 жыл бұрын
thats what she said lubricate it with soap
@chisholmranch1
8 жыл бұрын
No she said ,"Is it in yet?" or she said " wrong hole !!!!!!!"
@paullewis9490
8 жыл бұрын
There once was a sailor from Brighton, to his love said, "My! You're a tight one!", She said, "Oh, bless my soul!" "You're in the wrong hole!" "There's plenty of room in the right one!"
@flightnavigator89992 жыл бұрын
Lmao 🤣
@1Deepairdiver4 жыл бұрын
crap. can't do that with a mobile service on someones Ferarri. he won't want you back
@Tony-ib2vm
3 жыл бұрын
Most tire techs have not made power or used sticky rubber.
Пікірлер: 121
Great, great, great! This helped me mount a 335/80r20 tire on 12.5 x 20 rim. Thank you so much!
When I got sent to the shop to help the mechanic do semi tires he used this,yrs later I tried to buy some and explained how it worked at a local parts store,they looked like I was nuts! I couldn't remember the name and was looking tonight on the net and came across this video,thank you!
You know most of the people that can't stand the "extra audio" are just frustrated because they are sitting on that demon tire that won't seat sweating profusely and probably bleeding as well. I'm feeling that pain too...haha. Good trick, I would rather try this than ether if I had a choice, Thanks!
The video and advice was great. The background comments from the peanut gallery, not so much...
@rodneybrand8521
7 жыл бұрын
Chris C. is this a joke ???
@gasdude5153
6 жыл бұрын
not funny childish
@Tony-ib2vm
3 жыл бұрын
Spoken like a true $14/hr tire tech who can't afford sticky rubber or power...
Just found this video and it worked like a charm. Thank you so much!!
Thanks for the tip! I wanted to get the Murphy's but nobody had it in stock, so I found a similar product called Euro Paste by Ken-tool, at my local NAPA auto parts store. A bit messy, but was easy, and enabled me to get the job done today. It didn't cost much for the paste. Eventually I'll get one of the bead seater air tanks, but didn't want to wait or spend the $100 for the tank right now. Thanks again.
Thanks, got a stubborn bead seated doing this way!!
Absolutely loved the audio add-ins! Simple video, simple explanation---now I know what to buy! Thank you!
This worked! Putting this on heavy definitely did it for me. The lip of the tire wasn't lubed enough to go over the rim so it was sealing funny. I put some thick scoops of this on and got the pop I was looking for. Thanks Boss!
You never cease to amaze, Mr. Mariage. I've never seen or heard of that trick before.
Great Idea! I don't have any Murphy's but you gave me the idea to try squish up all your old bars of bath bath soap and save them in a little jug. or syrup might dry and seal up small leaks on my tractors!!
This worked for me when I installed all terrain tires with strong side walls.
Granted that you made the video 13+ years ago but I love the background side effects and commentary- Classic
Great tips, thank you sir! I'm battling a stubborn ATV wheel and tire right now. I thought I got it last night because the bead fully seated and the tire held air for hours. I looked again this morning, and the bead had come off again on one side. I'm going to find some of that tire goop and give it a try.
1:35 "Oh so that's what's happen'n huh?"
I dilute my Murphy’s tire soap with water to get a consistency of a thick liquid . Using a spiral paint stirrer chucked into an electric drill works well . I use this solution on 22.5 truck tires . Nice tip !
This guy is my kind of person! Thanks for the vid. I'll save the ether for starting my diesel now, haha. Bead blaster, bah!
This is a method we’ve been using at my family’s tire shops since before I was born but with the machines , cheetahs and tools it’s not really common method anymore and I’m really happy to have seen this again! Customers used to give us hell when they saw one of the guys doing this hahahaha
Awesome and loved the sound affects
2:27 Right in the eye! XD PS: Thought the color commentary was kind of dumb but this part right here brought me around :P
Couldn't find Murphy soap but GoJo worked a treat.
love the sound effects!
Looks like good clean fun.
Cool trick. Most people, not me, will use starting fluid. Of course if you do this alot a Cheetah bead seating tool works great! My favorite method.
Thanks, great video!
Murphy’s tire soap is a very good tire lubricant , the best ! Mix up a small batch adding water and mix with paint stirrer with a drill motor . The consistency should still be thick enough when applied to stick well ! I use a welder’s glove to apply , the gloves will last for years ! I change truck tires once in a while .
The people who make the soap say that once it has been used you cant put it back in the bucket and use it again. LoL !! I really enjoyed this and the sound effects.
@marshaul
7 жыл бұрын
Of course you can't! Then you wouldn't be buying it 10x as often.
LOL that's an easy one, I wouldn't have needed this video to teach me basics, I have one has a gap 2-3 inches wide all around...
@Mike Onnels - maybe the reason someone uses Murphy's Oil soap instead of a Bead Bazooka is the Murphy's Oil soap doesn't cost $250!! Unless you are doing this all day long it's hard to justify a BB for one offs. But thanks for the comment because I had never heard of a Bead Boozka.
Murphy's soap does work. Used it a few times before I got hold of a ratchet strap, only I used the liquid type and had to let it set up and kept applying layers until it firmed up. It still worked.
Loved the video, laughed my ass off
Just put shampoo water. Push tire radially in while pumping air without valve core. And keep your fingers aways from rim tyre-joint area when bead seating.
are you using a regular air compressor and without taking the valve stem out for that burst of air?
Great info
what a lot of people don't understand is a bead seater will seal most tires not all. tall truck tires 11r's not stored standing up become skinny tires on a 24.5 rim. I use bead seater than starter fluid then this soap, soap last because that starter fluid may pop the tire off wit that slick soap on the bead.
As mentioned, video and instruction R great. Background comments, a few too many too much...
i've seen that thing done on my five tires but the technician used a 4 inch paint brush to apply that grease like thng. so the grease like thing is for sealing the tire temporarily til the tire beads
That's my point....a tire that is too large is where starting fluid comes in very handy and is the best way to go.
Thats a new one, thanks...
I've got a different problem. My tire holds air fine, but I can't seem to get the bead to snap evenly into the rim! Happened on all four new tires I tried to put on. Even aired them up to like 50 psi (max allowed according to label on sidewall). What do I do? Take them off, de-bead and try again?
I thought the sound effects were cool! I have one thought though, If it doesnt want to seat down properly it would be a rough surface on the rim I would think? I like to take a brown scotch brite Roloc wheel on my right angle die grinder and polish up the rim surface if it's rough like that. The soap idea does work good though, I've used similar stuff in tough cases. Good vid as always!
That's the idea, if you don't have Murphy's tire soap you can use just about any thick compound that will offer just enough resistance to air to get pressure to seat. If you have a bad bead better use a urethane based caulking goo.
awesome......
Fire is also handy for emergency field reseating of low-pressure loader or tractor tires that come off the rim during work (if you have a 12psi tire eventually it will get down to pop-off point. Most of the time those tires are too large to seat on-the-spot with a compressor-driven reseater
Background shenanigans detract from video
most tyre shops i know of 'paint' the soap on with a brush before installing the tyre on the rim then blast it with air, pops right on!
I got to the garden hose step, but my garden hose is frozen solid. What do I do?
Carefull using this, it is very slick, I have seen tires turn on the wheel , this can be very scary then you come to a fast hard stop. (Wheel Stops tires Don't) No Fun.
The fellers at Big O Tires in CA. couldn't get my replacement tire to bead.. Watching 3 guys and a gal. using multiple air hoses on It.. I spent most of my day waiting. She said come back in the morning and It will be ready.. She said the tires were too cold to bead. huh. the first thing i thought of was Big O Tires shouldn't sell cold tires?
@charredskeleton
5 жыл бұрын
Tire tecs are a special bunch. Thats why I do my own. I find less damage is done to my car this way.
So the idea is to stop the slow leak so the air can get passed it into the broader portion of the tire until it then fills up and forces the inside of the tire to expand to the rim.. i bet peanutbutter would work.. or an soap lubed garden hose that would then be pushed out as the bead seated.
Nice. I'd be a little worried about where my fingers were in that video, though.
Had one bought new tires for explorer going on trip so mounted the old ones on my pu that only used local. I failed on 1 tire shop blaster failed put tube in not too long after tire completely failed belts twisted .although it held air probably the tube held
Works great just be careful, got shot in the eye with safeties on and got some up my nose😂
Thank you sir it is really working, I used Greece and success 👍
Also you can over charge, when the customer returns for numerous vibration problems, since the tire will spin on the rim the first time they brake or accelerate aggressively, throwing the assembly out of balance...
Money shot at 2:28. Is it wrong that a tire video got me excited???!!! :-)
Put the valve core back in and bounce the tire on the floor. That bead would have seated by bouncing in 1/2 the time not counting your clean up.
Yes she can play too, if I can apply the soap. J/K
suean interesante. pero tambien con un poco de plastilina o algun tipo de hule sintetico. puede sellear en los lados cuando la llanta perdio un peadzo de linia saludos
thought this was gonna be dry until I heard the great sound effects
Only time you need to do that is when you're mounting a narrow tire to a wide rim or a huge tire (ex. 11 r 24.5) that is very hard to handle. This procedure here seems best for this type of tire.
fyi im not doing all three at the same time if one don't work I try the next.
I have used grease but I think the soap would be better.
Can u do it while the tire is on the car?
@realfixesrealfast
7 ай бұрын
No, at least I would not
neat trick but i got one better its called starter fluid and a blow torch this also works on the car, like a junker that has sat so long it lost its bead. Jack up the problem wheel blow out debris from bead land depress sidewall and shoot a bit of starter spray or hair spray into tire be ready with air to chase the pressure exerted by explosion inside tire when you ignite the fluid you just sprayed. but i would not recommend that to a 5th grader who is the target audience judging by the soundFX.
could you tape over the space with duct tape?
YEEahh!
That tire machine is older than he is. They sell a thing called a cheatah its a tank u fill with air and it has a neck that comes out to the tire shooting 200 psi of air in half a sec no clean up
Or a Cheetah. You could use a cheetah. A shop should have a cheetah. There's off brand ones on ebay for cheap.
Can I us grees?
Still have all your fingers?
Very Good!... #115 ✝ {6-29-2022}
It's Murphy's Law until you use Murphy's Soap...
Seen people use bike tubes respective ti rim size
Nice, but I'm gonna tie my tire let it heat in the sun and cinch it first then lube it. Good video, but the soundman savaged you.
KEEP THE FINGER OUT OF THE BEAD IF YOU WANT TO KEEP THEM ! Ouch
I thought the dubbed comments were funny lol. I got an ATV tire that won’t seat about 4” along the bead. It’s aired up and sealed, I went to 40 psi and it wouldn’t seat. I tried breaking the bead again, added spray soap several times and it still won’t f*ckin seat lol. I have some bead sealer I might try to break the bead completely on that side, add the sealant, & try to seat again. Any other suggestions??
It’s kinda like Mystery Science Theater 3000 but for KZread
крышечку бензина вовнутрь и спичку... баллон наденется от воспламенения...
yeah i probably would of used a stick applicator instead of my fingers ;o)
@Laffy1345
6 жыл бұрын
Leo Shakur 😂😂😂😼😼😸😹
Petroleum jelly works perfect too!!
@GriffinBuilt
5 жыл бұрын
Gdavis2nd serious
Whats up with the sound effects? lol
It’s just a soap so you can just wash it off.
It's like you got a 12 year old to edit the video over with a soundboard.
I bet that stuff is 43$ at my auto store
thats what she said lubricate it with soap
@chisholmranch1
8 жыл бұрын
No she said ,"Is it in yet?" or she said " wrong hole !!!!!!!"
@paullewis9490
8 жыл бұрын
There once was a sailor from Brighton, to his love said, "My! You're a tight one!", She said, "Oh, bless my soul!" "You're in the wrong hole!" "There's plenty of room in the right one!"
Lmao 🤣
crap. can't do that with a mobile service on someones Ferarri. he won't want you back
@Tony-ib2vm
3 жыл бұрын
Most tire techs have not made power or used sticky rubber.
i think she uses it for ummm..
wtf
Too messy
get rid of the commentary
Fools
WTF?
silly voices
Lose the Peanut gallery voices
WTF is the deal with the sound effects?