Tire Changer One Year Update Video with Tips & Tricks kzread.info/dash/bejne/g4J4mtCYcdW0gtI.htmlsi=XUwyuzHL1dCcrmhl Manual Tire Changing Series: Part 1 - Manual Changer Overview & Mounting kzread.info/dash/bejne/Ymp-1JutYabUfrQ.htmlsi=wvgbwoxDUN1l1LLG Part 2 - Duck Head Modification & Tire Removal kzread.info/dash/bejne/qYynztGehJO3mKg.htmlsi=4UjZIhoC37FezvoB Part 3 - Mounting & Balancing Tire kzread.info/dash/bejne/e4xrptiDn5qnaKg.htmlsi=OTW5yzmpjdq7W5tL Part 4 - Repairing Tire Shop Damaged Wheel kzread.info/dash/bejne/mqJkusSBl9nUdrw.htmlsi=Sm4y9yX2i7_zWbcm Part 5 - Valve Stem Replacement Without Tire Removal kzread.info/dash/bejne/oqZoxNmCnMacadI.htmlsi=waOAvduaulSryRZl

@filmaker256

Жыл бұрын

could i use a little motor oil to lube the core ?

@Rchelicopterfun

Жыл бұрын

@@filmaker256 petroleum based lubricants will rot out the valve stem if that is what you're referencing as "the core".

@julesviolin

8 ай бұрын

If you can get away static balancing at home without taking wheels to the monkeys at tyre shops then all well & good.✅ I certainly would never take my car there as they chip the paint around the wheel bolts.🤬 I only ever take wheels already removed. They drop the wheel centres on the floor chipping them 🤬 They also round the corners of bolt heads etc because they can't be arsed getting the correct size socket 🤬 They cross threaded one of my studs once because they windy gun nuts on instead of starting them by hand 🤬 And like you say they never bother cleaning the rims thoroughly 🤬 #Bodgemonkeys 🤬

@Rchelicopterfun

8 ай бұрын

@@julesviolin I could not agree more. They also scratched a good number of my alloys over the years; a couple deep into the aluminum making curb rash look minor.

@williamgran6285

6 ай бұрын

Thanks sir

You had me convinced right up to "I just used my lathe" to fix the common accuracy issues all these balancers have.

@Rchelicopterfun

7 ай бұрын

Use a well balanced wheel instead as a calibration tool to set the center point. There is lots of info online how to improve these bubblers.🙂

I’ve been doing tires myself, my whole life with a manual bead breaker and an M-60 Micro bubble balancer! Next year I’ll be 60 and see no need to stop 😀😀

@Rchelicopterfun

11 ай бұрын

Nice! 👍

@mycarrysun

11 ай бұрын

Guessing the tolerance is not good enough for racing applications right?

@onesikm3

11 ай бұрын

@@mycarrysunthis is how they mount and balance drag racing tires at the track sooo ya

@robertk7674

11 ай бұрын

You don't need a special tool to remove the tire from the rim after you break the bead?

@onesikm3

10 ай бұрын

@@robertk7674 two tire irons and a bit of muscle and lube also helps. But totally doable! If I had the space to play around with one I would

If you want it done right do it yourself. Tire shops can’t even get air pressure right and don’t care about your car.

@Rchelicopterfun

11 ай бұрын

Agreed 👍

@garyv6442

10 ай бұрын

Sounds like you need to find a better mechanic or better tire shop . I've ran a tire shop for 25 years and never once have I ever forced anyone to buy anything.

@southern_merican

Ай бұрын

also getting grease on your seat and door and steering wheel

@frankcoffey

Ай бұрын

@@southern_merican It’s been long enough I forgot about that!

@miragef191

27 күн бұрын

They damage your rims and paint!real lowlifes.

You didn’t say goodbye to the tire shops, you became the tire shop 😊 👍

@Rchelicopterfun

3 ай бұрын

You got that right

@leothalion3983

Ай бұрын

😂

I used a bubble balance in 1971 at a Mobile Training Center. It was all we had back then. It worked just fine.

@Rchelicopterfun

11 ай бұрын

Yep, my experience as well having done 5 sets of wheels/tires now. Thanks for the view 🙂

I worked at a Sam’s club tire shop going through school. I learned I could get the balance machine down to .05 tolerance vs the default .25 tolerance. So that’s what I did. Btw, my fav story is the time a guy brought his Honda civic in for 4 new tires. By the time he was done paying for it I handed him his keys back. 😂 you should have seen the look on his face. 4 of us at once worked on the vehicle. He was so dumbfounded he couldn’t talk. 😂

I have an old bubble balancer similar to yours. It’s been my experience that I balance tires better than the tire shop. I’m not saying it’s better than a computer balancer but it’s better than a sloppy mechanic with a computerized balancer. The best advice I can give is if the wheel requires much weight to balance use two weights half the size and put them 45 degrees apart centered on where the bubble indicates. If the rims are steel I put half on the inside and half on the outside. I’ve had tires vibrate from the tire shop and checked the balance on my static balancer to find they applied too much weight. Car drives perfect after I balance it. I’m sticking with what works.

@Rchelicopterfun

11 ай бұрын

Good tips.

@stephenweston2973

10 ай бұрын

Beat me to the split weight. Move closet to light spot to give a more accurate balance. Since bubble weights tend to be in the eye of the user. Give a closer balance when one weight it to much and cant get half weights.

One thing I learned and always do when seating the beads. I remove the valve core and use the air hose WITHOUT the quick connect chuck installed...this allows more air at a faster rate to fill the tire. Works great on harder to seat tires.

@Rchelicopterfun

11 ай бұрын

Good tip 👍. I've found that out on a few sets that I've done now (done 5 sets of tires now on this equipment and each one gets easier). Seems the higher the profile the tire is, the more important it is to get the air in fast to get the beads to start sealing; as least that has been my anecdotal experience thus far.

@benzw2505

9 ай бұрын

One other thing I do, is use a gripping value stem air chuck with the guts removed. If you have bigger truck tires that have narrow beads you stand the tire up, valve stem to the side and give it kwick née the the opposite side or top to get the beads started.

@Rchelicopterfun

9 ай бұрын

@benzw2505 - Another good tip! Thanks for taking the time to share it 👍🙂

@NextLevelAutoDiagnostics

9 ай бұрын

Great tips. But why is there danger @ 9:17 in the video? If the tire is new, what can possibly go wrong trying to seat a bead?

@Rchelicopterfun

9 ай бұрын

@NextLevelAD - suggest you type that very question into a search engine and you will get many sites and articles that go into great detail of the dangers involved in seating tire beads. Many a mechanic have been injured or killed when when precautions are not followed.

You should sell your modded parts for other diy people.

@TempleOfNoMasters

11 ай бұрын

Second this

@Rchelicopterfun

11 ай бұрын

Wondering how would that be economically possible? Anyone wanting that service would require sending their low cost bubble balancer to me in a remote area of BC Canada to perform the work since it has to be mounted in a lathe to find dead center. The time, parts & shipping/import fees both ways would be worth more than the balancer is worth. Then add an hour of my time, again worth more than bubble balancer. After all that time & money, still only get a static balance along with a fragile balancer modification that I know some people would end up braking and then bitching demanding their money back. No thanks. Better to do it yourself or take that money saved and put it toward a computerized balancer.

@theroyalcrownedtiger2946

11 ай бұрын

You can ask and see if he might sell the modded bubble balancer to you, if you are willing to pay the asking price, shipping, and other fees. Also you could buy a used balancer machine and tire mount / dismount machine, if you got the funds for it.

@TheKitMurkit

11 ай бұрын

Gotta find a local metalwork shop with a lathe

@dubmob151

7 ай бұрын

Harbor Freight should offer the swing arm attachment for use with their manual tire changer, because that's what changes it from a wheel scratcher suitable only for steel wheels and wheels you don't care for about appearance, to one that could be used on alloy rims. That attachment is the biggest cost and biggest improvement to the DIY tire change setup.

When I first started working for a gas station as I was working my way through college bubble balancing was the standard for all new tires. Even the Chevron rep who trained us stated that there is almost no reason to ever have to dynamic balance a tire when you're properly trained on static balancing procedures. You must almost always use two weights separated at at least 12 in or so on the side of the wheel. As one of the practices for static balancing.

@martymiller9802

11 ай бұрын

I had a similar job during one summer in 1970. This was all SOP.

@Rchelicopterfun

11 ай бұрын

Nice. 👍

@dharmadoggie

11 ай бұрын

I dunno. Perhaps you have good luck with a bubble balancer. In the late 60’s when I first was driving they never seemed to work. Maybe it was a problem with poorly made tires, but I’ll stick with dynamic balance.

@jeffalvich9434

11 ай бұрын

@@dharmadoggie many times the tire person didn't have the patience or was lazy and instead of working for zero balance they would just get the bubble within a 1/16" of dead center...this was the way they would upsell spin balancing. The only time we would spin balance was if the tire was so out of balance that it would take 3 ounces or more of weight to balance it...... Most of the time we would send the tire back defective...... The higher end tires literally needed no weighs as the rims were actually out of balance..... But still would only take 2 weights of 1/2 ounce or less.

There is no better balancing than that I use to work in a tire shop and even the best machines they never get it right for zero balance you need manual machine and the way you modify yours is perfect 👍 good job

@Rchelicopterfun

7 ай бұрын

@konstantinostselios1129 - Appreciate that first hand experience information 🙂

Hi John. I'm posting this here because it's your newest video and I want to make sure you saw it. I came across your flight school more than 10 years ago and was really helpful to me getting started. I left the hobby about 3-4 years later but just picked it up again about a week ago. Your videos have become really helpful again - about 8 year later. So, I just wanted to say thank you.

@Rchelicopterfun

Жыл бұрын

Hey Allan, really appreciate the kind comments and great to hear you are getting back into the RC egg beaters after a wee bit of a hiatus. Happy flights 🙂👍

I added up the cost off all the items in description, the total comes to *~$620* Here's some information if you're considering to do this yourself. This is an investment, but it will certainly save you money in the long run, through-out your own lifetime (if not the car's lifetime). You can probably save $100 if you buy cheaper items, but some of these supplies will need to be rebought frequently. As of right now, the cost of tire installation at wal-mart is $18 ($28 for a roadside hazard warranty) per tire. $72 all four tires ($112 for the roadside hazard (get the roadside hazard)). Although there isn't any information online for a standard price at Firestone, my latest invoice was $97.48 for four tires (no roadside hazard). *Here's my opinion* If you're an average driver, then I'd suggest just taking your car to the shop. You'll likely only need to change your tires once every couple years, unless you puncture it. If you use your car commercially, have multiple cars, or just enjoy working on your car, then I'd highly suggest making the investment. IMO

@Rchelicopterfun

9 ай бұрын

Thanks for adding it all up. Can't put a price on the convenience factor either; especially if you live 600km round trip to any tire shop you half trust such as is my situation. For me, that convenience of knowing I can replace a tire or perform a tire patch repair any time at home is worth much more than $620. One single city trip avoided &/or one saved scratched wheel has paid for the equipment. 🙂 Not sure what TR413 valve stems you get that are costing $6 each? The box of 50 I got was about $20 bucks up here and I suspect they will last me for the duration of my tire changing days.

@chadd990

9 ай бұрын

@@Rchelicopterfun Thanks for correcting me on the valve stems, I'll update my post. The Amazon page says $6 per count, but if you actually read the page there are 100 pieces (50 valves 50 caps presumably) for $24. That's what I get for being lazy. With this revelation in the price, I'd encourage anyone capable to make this investment. I do live in a large city of over 3 million, so tire shops are abundant. I still see the value in this investment. Thanks for the video and the reply, by the way.

Be careful where you put those weights. a lot of brake calipers run a few mm from the inside of the wheel. so always check for clearance.

@Rchelicopterfun

4 ай бұрын

Yes, good point!

Very well done sir. I was impressed with your video in demonstrating what can be done in my own garage. I worked at a tire shop as a teenager and took for granted having the right equipment.

@Rchelicopterfun

5 ай бұрын

Yep, me too.

Nicely done, great example of how easy it can be. I live in the Rocky Mnts and there are a lot of us that have two sets of tires for summer and winter driving. Thanks.

I remembered changing a tire out when I was 16 with a friend on a junk yard tire. There wasn't enough curse and swearing to get the old tire off and switching it over to the junk yard tire. Busted knuckles and busted knee, spending all afternoon under a hot sun. Ever since then, I just pay my local tire guy $20 to get it done.

@randythayer8440

Ай бұрын

They count on the intimidation factor!

Very impressive road test indeed ! It is such a great feeling to DIY knowing you did a cleaner ,nicer and probably as ( or more) accurate job than most shops where you cross your fingers they don't damage anything ( which they always do 90% of the time !! I've experienced scratches, leaks, wrong side rotation mounted...) Hmmm, that tire balancing machine at $ 1000 also has me salivating.....but is it Chiniseum quality and durability??? As you said, I have 2 cars with winter and summer tires plus 1 or 2 punctures a year so it is beginning to make sense to own this tire changing equipment !! Thanks again for taking the time to make those videos !

@Rchelicopterfun

Жыл бұрын

@1983dmd - yep, doing a job yourself has its own set of rewards and value; something unfortunately that many don't seem to appreciate in this day and age. I'm still not 100% sold on the bubble balancer, but with the two sets of wheels I've done so far, I can't detect any vibration whatsoever and it has most certainly exceeded my expectations. Mabey if I took it up to 200 kph, something would show up, but the speeding ticket and possible jail time (which is also almost a 90% certainty with my luck) would then make getting a computerized balancer look like a bargain :) Those Mayflowers and other Chinese balancers do get good reviews so I don't think they are all junk; but no question, they are not the same quality as a $5K+ Hunter or Coats which do show up used at auctions for about half that. I unfortunately don't know enough about used computerized balancers to make an informed decision to purchase one. They may be so far out of calibration, un-fixable, or have other unforeseen and future problems making a brand new Chinese brand the better choice for a DIY'er with occasional usage. Oh well, for now the low cost bubbler will have to do, plus it doesn't take up much room. Have fun if you decide to give the DIY tire equipment a go and thanks for the comment 🙂👍

Manual changers are nothing new, as far as the bubble balancer the same , both commonly used in the 50 ,60,and 70's . Tires were also spin balanced on the car both balancing the tire, wheel and drums of rotors. We also spun heavy duty truck tires on the chassis.

You had me until 11:53 . Guess I won't be balancing the wheels myself lol.

@Syncopia

11 ай бұрын

Same thing I thought. Good tutorial for the hardcore DIY guys though.

@PeterHernandez-lg2eh

8 ай бұрын

Same

As a tech who hates doing tires, thank you.

@Rchelicopterfun

11 ай бұрын

😄👍

Yea, me, all my neighbors, extended family and friends now do our own tire mounts/dismounts....whether we need to or not ....we even do each others....cuz we can...

Fantastic video. Thank you! I very much appreciate the thoroughness with which you approached the issues. About forty years ago, I routinely mounted my own motorcycle tires after buying the tires through the mail. No Internet then, lol! I have been curious about doing my own automobile tires, and this video is a huge help. Thanks again.

@Rchelicopterfun

11 ай бұрын

Thanks for the feedback 🙂

@BearHomeOwnerDIY

6 ай бұрын

JC Whitney! That's where I ordered my motorcycle tires in the 80s

use to work in a tire shop and this is a very good tutorial on basic tire changing , i will ad that sometimes you need to remove the valve from the valve stem [more air volume] to get a tire to bead properly , will also ad that if you have never manually mounted a tire before it is a lot of work , until you aquire the skills and know how it can be quite a struggle depending on the tire a lot ...

@Rchelicopterfun

11 ай бұрын

Thanks for sharing 👍🙂

I use to just brush the liquid rubber seal along that area before pulling a valve through. It would also help prevent oxidation and a future air leak at the valve. I've changed well over 5000 tires at my old p/t job. My tires never came back for a leak.

I like the extra steps he took that shops probably never do like cleaning the rims before mounting the tires, etc.

@1ZZT223

3 ай бұрын

In California, I worked at Discount Tire/America's Tire. A lot of managers frowned upon me taking the extra time for things like this to prevent bead leaks or even scrubbing the hub of the wheel to ensure a flush fitment without 1-2mm of rust contamination. It's for the safety of our fellow neighbors and others on our roads. Shame that big name stores are lazy when it comes to ACCOUNTABILITY. Not a lot to ask for these days, I think.

@TRUMPUSA1

3 ай бұрын

@@1ZZT223 Here in Michigan, BELLE TIRE IS THE WORSE!! I've heard too many bad stories. Imagine buying new tires and they don't even clean your rim beads before they mount them!

Tip: This is something I saw someone else do that you could try. He called it the Y method to balance the wheel. For which you use two small weights opposite the heavy side with the placement of the weights spread so the three points make a Y shape. You can then adjust the weight placement to make it heavier by moving the weights together more, or lighter by spreading the weights. This works since you change the weight's leverage over the heavy side of the wheel by changing the spread.

@TK-gd9td

9 ай бұрын

But now you’re adding weight in the horizontal direction too.

@jmodified

8 ай бұрын

@@TK-gd9td Wouldn't that be better in most cases? It's not like there's just a hole in one side causing the imbalance.

@user-qj3tp7jk7i

7 ай бұрын

The bubble balancer I bought came with instructions on how to do it that way as well. In the shop that is the way we always did it essentially. If your tires and rims are in good shape a static balance should be just fine.

@5jjt

5 ай бұрын

From a tire buster, always use new valve stems. Once in a while, leaks appeared at valve stems once the bead was broken.

your idea is good, I bought a set of tire changer and wheel balance from amazon, they are the same kind of machine we use in auto repair shop, fully power by electrics, the balance tire part is perfect as we do in the auto shop. and that total I have spend around $1700, and every time change tires no need to be working so hard to get the tire on and off, all done by machine.

We ALWAYS Clean the rims at work, Extremely important with modern rims as they will Leak much easier then old school Steel.

I want to get a tire changer for the same reason as you . I brought my old tires to a shop , bought 2 tires ,had them mounted and balanced ,brought them home and put them on the car . A couple days later one went flat (I didn't drive the car) ,they re-mounted it (cleaned the seat ,I'm sure) ,they wanted to charge me 20 bucks ,I told them I wasn't paying it , they told me to never come back ,I said I wasn't planning to .

6:50 I think most people call that protrusion the "duck bill". This has been a great video. I change my own motorcycle tires with a duck head machine that I designed and built but the process is exactly the same. It's amazing how many "experts" out there do videos just like this but have no idea how to properly use the duck head. You nailed it perfectly; the new gold standard on how to do it correctly. But, having said that, a second rim clamp will make it easier. I space them so that they are about 1/3 of the circumference apart with the second one going in just where / when you start to apply pressure to the lever bar.

I like how you included links. Thanks! Will make tires for drifting more clear minded.

@Rchelicopterfun

6 ай бұрын

You bet - have fun 🙂

Been doing all mine for 20+ years on a Coats 220 and bubble balance. 10 plies suck ass and are damn near impossible sometimes but they still go with a lot of cursing and beers. No bead blaster here...just bead blaster in a can (ether and a torch). Works great when you get the air fuel ratio right and get an explosion and not flames 😂

@Rchelicopterfun

11 ай бұрын

😄👍

had a tire shop tell me I needed new rims because the new tires they installed wouldn't hold air for more than a week. The front passenger tire not more than 3 days. I took matters into my own hands, one by one, removed tire, dismounted then CLEANED the rim, elbow grease and a wire brush, remounted, installed back on car... Look Ma- no more flat tires. The amount of old rubber and debris left on my rims was not allowing the bead to seat and seal properly. I've always done my own motorcycle tires - now I'm doing my car and truck. I only had old fashioned tire irons- I now use the Harbor Freight 'special' but I modified it to actually work. Plenty of vids on how to make the HF tire changer 'your own'. Good luck everybody.

@Rchelicopterfun

9 ай бұрын

Yep, I've been amazed at the amount of unseen damage inside some of the wheels I've done now. Deep scratches on the bead sealing surface (slow leak as well), layers of old tire goo and corrosion, even found one with a rag inside. As the saying goes, if you want something done right - do it yourself.

@jakelynch5113

2 ай бұрын

let me guess, you had a layer of "rubber" about 6 cm thick around the face side of the bead after months or years of going mudding or off roading?

@lynskyrd

2 ай бұрын

@@jakelynch5113 not too much 'mudding' in a Volvo s60 sedan there genius. There's no guessing here- the tire 'professionals' were simply LAZY... gee, what a surprise.

I never thought this could be done with the amazing tool. Thanks for sharing. It is the first time I see it. Amazing.

@chrisstokley7687

9 ай бұрын

yup- all about CORRECT Way use the tool.. Dont have too strain if your useing correct tool pattern!

Thanks for the presentation John, crisp clear and the picture is impressive.

@Rchelicopterfun

11 ай бұрын

Many thanks for watching 🙂

I love your setup. A half got some new rims and took them to a shop and they Scratch them not happy I need to get your set up. I love it.

@Rchelicopterfun

11 ай бұрын

I hear you & fully understand the frustration. In fact, just made a video where I repair tire shop scratch damage: kzread.info/dash/bejne/mqJkusSBl9nUdrw.html

for those whos rims don't seat with an air compressor alone, you may have to use a bead blaster to seat the bead. I remember the tire guys telling me my rims were difficult to seat, so it helped me to put together the solve... now I know what those pops were at the tire shop; Wear ear protection...

I started working in shop with dad when about 11 in 1981 and back then we used old school bubble style balance mount with bubble. . .this is kool to watch..little effort,at home, done…thanks for video.

@Rchelicopterfun

5 ай бұрын

Thanks for watching & sharing 👍

Cleanliness is on point 👌

You should do a video of what the dynamic balance came out to compared to your static balance. That way we know just how close a bubble balance would be to a computerized balance. Thanks and great video! Subbed as well!

@Rchelicopterfun

11 ай бұрын

Thanks for the sub Ryan. 🙂 Wish I could accommodate your request, however I have yet to have any tires I've done with the bubbler (20 now) show any vibration and that was even taking one set up to 220 kph . So, I've fortunately had no need to take them to the city and have them computer balanced. I've also put the CAE-3019WB computer balancer I had on order on permanent hold as I no longer see the need to get one now. If I do get one however, I most certainly will do an in-depth follow up video comparing bubble static to both computer static and computer dynamic.

@pankajmakwana2300

8 ай бұрын

The simpler unit works fine, so I don't see a need for a computerised one.

@v65wings45

5 ай бұрын

@@Rchelicopterfun do you get the rated milage on your tires when you static balance only on your bubble balancer?

@Rchelicopterfun

4 ай бұрын

@v65wings45 - Been almost a year since I mounted and balanced the first set on the wife's car with 40K kms on them and have used about 3/32nds of tread. In short, they are wearing exactly the same as the previous set she had on that car that were mounted and balanced dynamically at the shop. Not that I would expect anything different since wheel balance is not a component of tire wear; at least so long as the tire is not massively out of balance and thumping down the highway. A pot hole slightly tweaking the toe out of spec however would wear them out way quicker.

@tredogzs

4 ай бұрын

get a rock in your tire... wheres the difference

I’ve had way to many issues with tire shops from scratched wheels to bad balancing. The problem is the turnaround is insane at these places and you have a very good chance of getting the “new guy”. Fortunately I have a buddy who has a shop and lets me use his tire machine and balancer. Unfortunately it’s over 100 miles away from me but it beats the hell out of getting a nice set of wheels destroyed.

@macdaddybill

10 ай бұрын

I've had every shop scratch nice factory wheels even though I tell them to hand torque, pissesme off. I would rather do it myself.

@dubmob151

7 ай бұрын

​@@macdaddybillhow did hand torqing the wheels during installation prevent scratches? Are your lug nuts getting scratched?

@bagginn

Ай бұрын

@@dubmob151I think he means the socket is scratching the inside of the holes where the lugnuts sit

@dubmob151

Ай бұрын

@@bagginn thin wall sockets vs impact sockets? It's a rare wheel that has so little clearance that it requires thin wall sockets.

Those are the cleanest rims I ever seen

Thanks for taking the time and getting this up. Appreciated and keep it up.

Just wana say that I have never had tires balanced correct from tire shop (without vibration) always comes vibrations around 100km/H and that's no matter what car I had, the worst was 4x4 car tires. Now thinking to get one for my garage so stop pay for bad job at tire shops...

I was really appreciating how clean and well lit your garage was, and then saw R2 sitting there. Now I think this is the most EPIC garage I have ever seen. Very nice video on this subject. Thank you for sharing it.

@Rchelicopterfun

5 ай бұрын

@bradmottishaw467 - Thanks for watching & commenting; yep, R2 was a super fun DIY build project 🙂 By the way, if you're at all curious/interested about the lighting; I have a video of the LED ballast bypass conversion process from when the lights were ordinary T12 florescent tubes. That little afternoon project made a huge difference in overall brightness of the garage. kzread.info/dash/bejne/p6tqk7aNgdvZYJc.htmlsi=BdcmpmVbjMhga8H8

@redfly5937

5 ай бұрын

It was 100% the R2 for me, too!!!!! Best character ever. #r2love4life 😂😂 yeah, I'm a tad obsessed with him.

The second I saw the tucked in T-shirt with a belt, I knew I had found my people! I am a DIY guy, but you are a DIY Boss!

@Rchelicopterfun

10 күн бұрын

😄

@youaregodspursuit

7 күн бұрын

Sorry... i would prefer an oily rag in the back pocket, tail of shirt out with taco sauce stains on it, and mysterious things piled in the corner and at least one finger that has duct tape around a wound ... I am afraid of the clean as a whistle, anal, engineering guys. I always feel inadequate after watching them do anything, regardless of the fact that the video was great.

I’m old school. 69 Watching tires get changed close up. Especially when I was young. They let you watch them. This video is great. He seems to do everything great. Which is good. The people changing my tires did nothing like what he’s showing. But always seemed to work. You could tell they were in it for speed.

For the last two decades I've successfully used dynamic balancing. Super easy by using centrifugal forces. Pour 2 to 4 ounces of plastic beads inside the tire and its good to roll. The beads don't affect any tire sensors.. The tires wear evenly and therefore last at least thirty percent longer then the manufacturers estimated tread life.

@Jmg831

10 ай бұрын

😮😮😮 I wanna try this

@MN-sc2uz

10 ай бұрын

You mean without actually balancing the tire? The beads are doing the dynamic balancing s the tire is used. Am i correct in that udlnderstanding? What kind of material of plastic beads did you use. This is very very interesting.

@superargo4701

10 ай бұрын

@@MN-sc2uz Correct, no balancing needed. Bare tire on bare rim. I use four to six oz of ceramic beads (1/16' diameter). After the tire is loosely mounted but not inflated, I pour the beads in, making sure none remain on the tire bead surface. Then inflate the tire and its good to go. If a tire picks up rocks in its tread, no worries, since the beads will continuously balance out the uneven weight of the tire. This method of balancing dates back to the steam engines and flywheel balancing techniques, where copper tubes filled with ceramic beads were used in parallel for balancing.

@MN-sc2uz

10 ай бұрын

@superargo4701 ok so its not plastic beads rather its ceramic beads. How do determine the amount of beads you should add to the tires? Where do you get your beads? Thanks again for the reply backs.

@zugzug1107

9 ай бұрын

Just put 3 oz of airsoft BBs in the tire and your done. I've heard of people using steel BBs to but you have to add a splash of antifreeze so they don't clump together in the winter. No more chewed up aluminum wheels from those stupid weights.

It would be interesting to see a dynamic balancing result right after the static one. How close it can get you to the optimum

@garyv6442

10 ай бұрын

Will show a different weight each time unless you mount the rim to the balancer in the exact same spot.

@bb5242

7 ай бұрын

I had a bubble balancer. It took a lot of back and forth to get the wheels balanced. I ended up buying a Mayflower spin balancer which was under $1000. It works great. The mounting machine he has is cool, it's very similar to the one I built. Doing tires manually requires muscle, you get a workout!

@chicken29843

5 ай бұрын

​@@bb5242yeah it's kinda fun

Great video John! Very informative. I've been on the fence about these tire changers and balancers for awhile. I think you just convinced me to pull the trigger on these two items.

@Rchelicopterfun

11 ай бұрын

Thanks for the view Mitch. Seems to be lots of hate on the little bubble balancers going by some of the comments which I knew I would get going by all the research I did on bubblers before getting one. However, if you are up to any improvements it might need, or if you can find a good used Coats M-60 bubbler, the results, granted being static, are not bad at all. I've done 5 sets of tires/wheels now and all have been smooth as glass, so I've put off the CAE-3019WB computerized balancer purchase (at least for now). It's not just the cost either and shipping logistic hassles to my remote location, it's the space required for one so it's very hard to justify when the bubbler is giving vibration free static results.

@mitchmiller9658

11 ай бұрын

@@Rchelicopterfun Thanks John! The helicopter mechanic in me salivates at the “challenge “! 🤣🤣. It would seem my area harbor freight stores are currently out of stock. Not to worry. HF has more sales than a mattress store. 🤣

@Rchelicopterfun

11 ай бұрын

😄👍

@BearHomeOwnerDIY

6 ай бұрын

@@Rchelicopterfun Tire Balancer project 2.0 -- using a cat toy laser and a translucent "hub cap" cover for the beam to shine on.

Best explanation of this with the mods you did, thank you.. did my SUV tires without issue, not low profile had some issues, will try the tips you gave me.

@Rchelicopterfun

7 ай бұрын

Great to hear 👍🙂

Great instructional video !!!

@Rchelicopterfun

Жыл бұрын

Thanks for watching - much appreciated 👍🙂

I'll buy the duck head adapter for the HF tire changer; I'm tired of the tire shop forcing you to buying their tires and upselling you on new valve stem sensors when you get new tires installed.

@Rchelicopterfun

11 ай бұрын

I was also tired of them scratching my wheels ☹

I live in a major city in the UK so I'm always in range of a tire shop but I'm tempted to do it myself after seeing this! Great instructional.

@Rchelicopterfun

4 ай бұрын

Thanks for watching 🙂

@actually5004

3 ай бұрын

Is it even legal to own a tire bar in the UK? That could be a lethal weapon!

6:09 😂😂😂that is a sentence I could never imagine hearing, but here we are

@Rchelicopterfun

3 ай бұрын

😄

nice video! thanks!

@Rchelicopterfun

11 ай бұрын

Thank you too

John, this is a great video. Thank you for making it.

@Rchelicopterfun

18 сағат бұрын

Thanks back for watching it 🙂

A well done video! Thorough info and clear audio and video. Thank you for sharing!

@Rchelicopterfun

9 ай бұрын

Glad you enjoyed it - thanks for watching 🙂👍

Nice job on this video. Found it helpful. I especially like the modification for the balancer resolution. I also have that same arm and duckbill set up minus the upper and lower bearings. Another future modification I suppose. As an old Star Wars fan, I have to ask. What is the story behind the R2 D2 in the background? Looks pretty sweet.

@Rchelicopterfun

Жыл бұрын

Yes, my only regret is not getting one of these changers years ago (the money & time I would have saved), but I suppose these duckhead mods for the manual changers are fairly recent. Hope you find your changer and ducky mod as useful. As for R2, it was a build project from last year. The full build series is on my channel: kzread.info/head/PLZV8xZm3OCXz8I0FoPzIeU--13oWWJfZv

Can't be any worse than going to Discount Tire. They have the best equipment available and still can't correctly balance a tire to save their life! I've wasted so much time going back to have tires re-balanced time and time again.

@Rchelicopterfun

11 ай бұрын

That's been my unfortunate experience as well, albeit with other franchises. Even when they do get get the balance correct, it's a coin toss lately if they've scratched the wheel.

@FoxFaderWorld

11 ай бұрын

Find my post on here and read it. You'll never need them again for balancing.

@11quatro4

11 ай бұрын

Funny this has brought up, I been to 3 different Discount Tires in my area for the past 10 years with many sets of different tires and technicians. None could ever get it right. Went to Walmart and it would be silky smooth. Im done with Discounts.

@vegasfordguy

11 ай бұрын

@@11quatro4 It literally happens at every Discount Tire I've been to. It can't be their equipment, it has to be their employees and lack of training or something. I've spoken to so many people over the years with the same experience.

@buckmurdock2500

11 ай бұрын

they are not trained on how to properly use the equipment. For example with balancing, they will continue to add weight until the machine reads zero. They will put weights around 3/4 the circumference of the tire and the lightbulb never goes off.

John, you, sir, are a madman to do tires at home 😂

@Rchelicopterfun

10 күн бұрын

😄

Excellent method. No need for expensive equipment. We were doing this over 30 years ago. 👍🏻

@Brocephus77

4 ай бұрын

@@Rchelicopterfun sorry bro, that wasn’t cool. I’ll edit my comment.

I mount my own tires as well. The main reason is I live in the salt-belt which causes the rim beads to corrode. Tire shops will not clean/smooth the rims, they just smear some sealant and hope it's good enough for a few weeks/months before the you get a bead leak. I like to inspect and clean the rims properly before the new tires go on. As for bubble balancing, there are better options. A computerized manual spin machine can be had new for around $1K. I've also found this video of a German-made manual dynamic balancer from the 1960s. Honestly, if I could find one these I'd buy it in a heartbeat. kzread.info/dash/bejne/eGmJxcajhdbbetY.html

Don't be scared of mounting the beads I've gone up to like 70 psi on a regular tyre a few times in my shop and although they're scary and loud n some of the wheels were a bit sketchy they never exploded or anything and we were using cheap ass tyres all the time 🤣

Man that's a lot of work. Thanks for showing us how its done.

I used to have a coats balancer. Was fantastic. Wish I knew how to mount the tires at the time

I'd love to see you fit a set off runflats on that machine

Nicely done...thanks for sharing how you do this! I think I will be getting one of the manual tire changers now. You might also consider using beads inside the tire for dynamic balancing. I have a friend that manually mounts his tires for his Hummer H1 (since many shops would not do them or charge an outrageous amount because of the size and the run-flat insert) and he used the plastic pellet gun beads. The are perfectly round, have no residue or dust, and are relatively cheap. I personally have used the glass beads (perfectly round, have no residue or dust, but are relatively expensive) in tubeless motorcycle tires for years and have had good results.

@MN-sc2uz

10 ай бұрын

Can you elaborate more on the beads. I'm thinking off doing my own tires too, need more info on the beads going inside the tire. Im guessing they provide a sort of "online" dynamic balancing as the car moves?

@seriously195

10 ай бұрын

@@MN-sc2uz Also, search for 'airsoft pellets to balance tires' and a link to the Pirate 4x4 forum comes up with good info.

First let me say, this video was extremely well produced, your attention to detail and care to do everything the proper way was very impressive. That being said it seems counter productive to go to so much care and detail only to do a really crappy static balance vs that less caring tire shop that will send you down the road with a proper dynamic balance and smoother ride for 59 bucks... Even if they don't wipe away all the previous wheel lip residue.

@Rchelicopterfun

7 ай бұрын

I have to disagree with "crappy static". Done 5 sets now and one patch repair, all smooth as glass. As many others who work in the tire industry have correctly pointed out here in the comments, static balances are usually good enough with quality wheels and tires. I actually had the CAE 3019WB computerized balancer on order (not that I have much room for one), but after the great smooth as glass results I'm getting with small form factor bubbler, I've put that purchase on hold. Moreover, that $59 dollar dynamic balance you speak of is elusive in my remote location. As stated in this manual tire changer video series, I have a 600 km round trip to the tire shop so that is a day of my time, a day's lost wages, at least one meal out, a tank of fuel and wear on tear on my vehicles every single time. A tire balance, even a simple patch repair for me costs several hundred dollars and a day of my life wasted. It's why even a computerized balancer would eventually pay for itself. 🙂 Thanks for the comment and watching.

Very educative video. I wonder how good the balance would be against fully computerized Hoffman we use in our garage. This balancer is really nice - measures wheel size using laser, it's ofset and has plenty of options. One thing I noticed when balancing larger rims with 5 or 6 mounting holes, the use of special centering adapter/pressure clamp makes balancing persistent and very accurate. In the winter tire change over I do more than a few sets a day and this machine is big improvement over regular one when we had to do measurements manually and punch the numbers into computer.

U bring back memories. I worked at a Gulf station in early 70's when gas was 29 cents a gallon. ANYWAY, I used to mount tires by hand like u did & I dreaded winter season mounting all those snow tires. 🙄😂🤣 U should get RuGlide bottle comes with their own brush. 👍

@Rchelicopterfun

11 ай бұрын

Thanks for sharing

The knowledge, tools, time, and effort needed to change a tire...shops are not short of customers!

I been doing my Tires for the last 6 years , My GF drives for work and I do her tires they wear normal no cupping or off side wear . I make sure the tie rods and bearings are in good shape and alignment is good also the new cars have to have all 4 wheels aliened . They do work if you notice shaking ir a vibration . go to a tire shop . 30 bucks they will check the balance .

John my first video watching you and I don't know what you have done your whole life but it definitely seems like you come from an engineering back ground. I liked how you solved your problems and seems like a great solution.

@Rchelicopterfun

8 ай бұрын

Thanks for the view - appreciated 🙂

I wasn't sure if this was clickbait but a guy who has a life size R2D2 can't be lying. I have to watch all three videos.

I seen this home made contraption 25 years ago , i was working up north and this dude named John would fix flats with this ...kinda like this

Really impressive how far out was it from a dynamic balancer?

Great Job !!!! no one spends the time to do things right .. your one of the few .. A1 perfect video

@Rchelicopterfun

4 ай бұрын

Appreciate the view - happy New Year.

Great Video. I like to see that I am not the only one who likes to do as much as I can at home. I have had horrible luck & experience with the half wits that work at tire shops. I'll be looking at getting one of these before too long. I hate tire shops. Such a drain & waste of time.

Right on about the convenience in this method. Valuable details in your video. - Thank you!

@Rchelicopterfun

Ай бұрын

Thanks for watching

Thanks John for showing this tool and giving an excellent demonstration on performing the task, I may just go out and bye myself one of these balancing rigs as I don't like or trust the tire shops.

I really dig your R2D2

Lube also doubles as a Sealant for the Beads, Less u use Actual Bead Sealer . Yellow, White and or Red Dots on the tires for the Weight differences . You should ALWAYS Lube the Duck Head, Even more so with lower profile tires & the chance of Tearing them is higher . Also Don't forget to Remove the Valve Core when filling .

I was planning on going this route, but circumstances ended up allowing me to get a used Atlas tire machine with helper arms and balancer. If my understanding is correct, the quality of a bubble balance basically comes down to the precision of the operator. Having dynamic at home is super nice though. :-) I couldn't deal with tire shops anymore and I work weird hours so that further complicated things. It also makes using up used tires off of marketplaces a lot more economical with no mounting and balancing fee.

@Rchelicopterfun

9 ай бұрын

Well said 👍

Hi John. I watch your RC Heli videos. I came across this video by chance. I changed my motorcycle tires myself. I bought a demounter/mounter and static balancer. I found that the tires I bought rarely marked the heavy spot. So I statically balanced the tire and then used ceramic beads for dynamic balancing. It worked well for me.

@Rchelicopterfun

Ай бұрын

Great to hear

Get the spin balancer. Nice work.

Wow, legend in the RC heli community is also tire master. will definitely try this one day soon.

@Rchelicopterfun

11 ай бұрын

@halleffect1 Thanks for the view. I of course like most in our hobby enjoy a challenge and learning news skills, DIY tire service is just one more useful example to add to the list 🙂

Great video. I bought one of those little balancers at the auction and will be looking at how to do your suggested mods to it. I've always done the tires on an old Coates 40-40 found in someone's garbage at the side of the road, But it is limited to 16"

@Rchelicopterfun

11 ай бұрын

Thanks for the view 🙂

@zemantire

4 ай бұрын

I DO UP TO 18" ON MY 40-40 YOU HAVE TO SHIM THE BOTTOM BEAD BREAKER SO IT DOESNT HIT THE RIM. I USE A 3/16 PIECE OF FLAT STEEL AND IT WORKS FINE JUST CHECK THE BOTTOM

@ClaremontClassicGarage

4 ай бұрын

@@zemantire Yes, you are correct I have done a couple of 17s that way.

Really outstanding video. Thank you sir! Appreciate all your shared wisdom, knowledge and experiences.

@Rchelicopterfun

4 ай бұрын

Thanks for watching & commenting 🙂

P.S. I love British Columbia (VCBC) and the island, WONDERFUL Ferry system and people, Your close to Richard Michael Owens shop.I live in Chicago metro area.

I always liked sticking an old valve cap on the sidewall when setting the bead yelling "fire in the hole" before it popped.

Hi guys I'm Swedish and I use a different zero cost method. 1 drill a small hole in the very center of the center cap 2 put a string through the hole and hang up the tire horizontally. The heavier part of the tire will be slightly lower than the lighter part opposite in the same way as is the case with the bubble balancer. 3 stabilize and spin the tire slowly and watch for a slight wobbling movement at the rim edge 4 install a fixed stick or something very close to and from above pointing at the rim edge 1-2 mm distance 5 when the wheel is spinning slowly you will see the gap between the stick and the rim edge increase and decrease and thereby telling you where to put your weights Don't spin the wheel too fast. The gyro effect will stabilize the rotation and the movement will be smaller I have tried many diy methods and this is by far the easiest and most accurate one and to no cost at all. Good luck P.S. I have six cars, four motorbikes, two boats and two snowmobiles... so yes I am a do-it-yourselfer

I love your attention to detail and precision. This is exactly what I strive for with every project that I do. @GreggyGTV

@Rchelicopterfun

9 ай бұрын

🙂👍

Im honestly suprised how well its doing. My new rims took like 10 wieghts 😅

@15:35 That's called static balance as you said.

Wow you’re the only other person I’ve seen clean the wheel drop we do that at my job we’re very picky about making sure it’s all done clean

@Rchelicopterfun

4 ай бұрын

@johnwest6977 - Wish I had your shop and detail oriented technicians working on my wheels for the past several decades; if I had, I wouldn't have needed to start doing this myself 🙂 Just one example: kzread.info/dash/bejne/mqJkusSBl9nUdrw.htmlsi=7frPDP3AeI37rs1n

Balance beads work great.

That’s amazing, thank you for making this video

@Rchelicopterfun

11 ай бұрын

Thanks for watching 🙂