This is the only video I could find that CLEARLY details how to install those pads. The most annoying part was the proper orientation of the clip and the placing of the pad in front of the tab. Nice job!

took me two days of seaching for how to put the brake pads back in could not find any until I found this video took me 5 mins to put it back in. THANKS SO MUCH YOU SAVED MY MENTAL!!!!!!

The best video on KZread about hidráulic break’s

The soundtrack has me vibing while learning🤙😂

Thank you so much , i couldnt figure out how the spring goes in there😂

thanks! i spent over an hour last night trying to re-asemble a rear brake on my non-kawasaki - the design is different but the same idea is used, after watching your video i put it back together in 5 minutes!

Dude! This video is amazing! Thank you for posting this!!!!

@tomyribas6804

3 жыл бұрын

You’re welcome 🙏

keep doing this amazing type of videos bro! you are lit

@tomyribas6804

7 жыл бұрын

SURE!! Thanks BRO!! May be in this week im going to be uploading a new video installing the chain.

Thanks for the video! It was causing me some stress fitting my pads! Lol

@tomyribas6804

4 жыл бұрын

Your welcome

Thank you very much for this video ! It helped me like hell ! A+++

Good information. Our rear caliper did not have springs for the the outside pad so I took a spring and made a pair. Now I now why the outside pad was completely worn down to the metal. The break's work much better. Thank you

@tomyribas6804

3 жыл бұрын

thanks 🙏

@fiddlyphuk6414

3 жыл бұрын

Hey- mine didn't come with them either, I mean WTF?. Thanks for the heads up.

@Jay-kk3dv

2 жыл бұрын

SAME! Now I know why my brake was rubbing so bad on the disc. Do you have measurements on that spring?

Good video man detailed and easy Thank you

@tomyribas6804

4 жыл бұрын

Your welcome

Thanks you for making it simple for dummies like me

NICE VID DUDE, THX I HAVE BEEN LOOKING FOR A VIDEO LIKE THIS, REALY THX!!

@tomyribas6804

7 жыл бұрын

No prob BRO!!

@poolman8201

2 жыл бұрын

Best video I've seen on here, where can I get the master cylinder and brakes from for a x motos , can't find a match anywhere?

Great video man exactly what I needed ,I just got me a 150cc Apollo pit bike I'll be uploading videos and stuff too. But first I need my brakes! Lol keep up the good work

@isaackoshiol7568

5 жыл бұрын

High-key me same here^^ 👌🏾👌🏾👌🏾

@tomyribas6804

4 жыл бұрын

Your Welcome

Perfecto work thank you

Thanks! We've spend an hour on changing brake pads and we had turned the spring the wrong way

You just saved my ass. Thanks!

@tomyribas6804

3 жыл бұрын

You’re welcome hahaha

Mate thank you very much

Where do you get SSR 110CC rear caliper..

Hi I have a the same caliper pads etc except it's for the front but everything else is the very same I'm having difficulty with the smaller pad falling out when the piston puts pressure on it pushing it out of the grooves, does your smaller pad clip into anything i have the small steel clip in place but it doesn't seem to hold the smaller pad in place any ideas thanks

@tomyribas6804

4 жыл бұрын

I have no idea, the pads dont clip into anything, at first before i knew how to assemble the rear brakes i though i had a piece missing maybe something that clips just like you say but no. So, i really don’t know how to help you i sorry! :( I hope you find out!

Thank you. That little metal clip was driving me fucking nuts! Could not figure out the orientation. Thank you thank you!!!!

Thanks!

@tomyribas6804

4 жыл бұрын

Your welcome

not all heroes wear capes

@tomyribas6804

4 жыл бұрын

Your are right hahaha

tnx brooo

Rugó nincs a fékbetéten az hiba?

Hi I have a 125 cc dirt master and it needs front and back breaks can you please recommend me some thanks

@tomyribas6804

6 жыл бұрын

Aamir Ali I bought the originals, where i bought it

Thanks man! I have the exact same rear caliper, but it didn't come with the two springs to hold the longer pad in place, wtf!

ty

@tomyribas6804

4 жыл бұрын

Your welcome

Hi Nick here from SA, great video firstly. My sons quad has the exact same rear braking system but it has a hand brake ( cable that runs from the lever down to the calliper) could I send you some images and perhaps you could help put this 3D puzzle back together. Thank you

ahh, so i am missing something from the assemble. Mine never came with the return springs. Email sent to supplier. Thanks for the vid

2nd how to add lubrication for bedt j familurias best production aanbest l

wht size u use to take off the bk axel

@tomyribas6804

4 жыл бұрын

16mm or 17mm socket :)

What actually keeps the inner brake pad from falling out?, mine did,

@fpmoto5247

11 ай бұрын

Same

Where did you get that caliper from ?

@tomyribas6804

4 жыл бұрын

From the bike.....it the original one.

Its much easier if you install the axle from left side first.....😁😁😁

@T33DUBZ

5 жыл бұрын

Mines hard as hell to do from the left 😂

@tomyribas6804

4 жыл бұрын

hahaha

You know where I can find those break pads

@tomyribas6804

3 жыл бұрын

Im sorry but i don’t know...

What song is the intro?

@tomyribas6804

4 жыл бұрын

Cant remember, but here you have the channel that created that song DJ QUADS.

My clip is slightly different, been racking my brains why the hell its been squeeling like a bitch, the clip on mine is bent out of shape a bit, I gotta fix that, thanks man!!! (Saved my ass here, I don't have the springs on mine either, I might add them too)

What pit bike is it. I have the same caliper Cheers

@tomyribas6804

3 жыл бұрын

GRF 90

Mines is thumpstar

Brake pads are now contaminated from wd40 just saying

@tomyribas6804

3 жыл бұрын

True

Lol good video but why not just talk

@tomyribas6804

4 жыл бұрын

Thanks, is a future plan hahah.

That music is annoying

@tomyribas6804

4 жыл бұрын

Thanks for the advise.

Music was to bad to even watch

Get rid of the crap music and actually talk and you will get more subs. Everything else was good.

@tomyribas6804

4 жыл бұрын

Haha thanks for the advise