This would be very helpful if I had a dirt bike.

@repozal

3 жыл бұрын

Same

@randomruns8454

3 жыл бұрын

Same

@upSettTV

3 жыл бұрын

Same

@currenwiggin8982

3 жыл бұрын

Lol.... am I the only one here who has one?

@edithclopez8791

3 жыл бұрын

Shut up

Thank you for the efficient delivery. 31 good facts in 7minutes.

@TheMxFactory

4 жыл бұрын

Thanks, Jason crushed this one!

@connortidman6925

4 жыл бұрын

@@TheMxFactory Honestly, I would've liked if it was slightly longer, with a bit more of an explanation

@weevilinabox

4 жыл бұрын

Yep, no messing about. Just a bunch of handy tips in less time than the preamble on some folks' hack videos. Thanks.

@titandelosolimpos

4 жыл бұрын

kzread.info/dash/bejne/lZaqtMazYaq0l5M.html Sobre motos 👆👆 Motocycle

@titandelosolimpos

4 жыл бұрын

@@connortidman6925 kzread.info/dash/bejne/lZaqtMazYaq0l5M.html Motocycle

“A leaky fork seal can ruin a day of riding” my Cr250 forks are bone dry so they don’t even leak anymore

@janprokopenko7928

3 жыл бұрын

Sounds like a well maintaned piece of machinery

@LakaiSkate15

3 жыл бұрын

#relatable 😂

@daxxbender6568

3 жыл бұрын

Same bro

@Sage-qd6tf

3 жыл бұрын

Lmao perhaps you should fix that

@Bumpyfn250

3 жыл бұрын

My rm125 forks need a rebuild

Repair fender cracks with a soldering iron, just melt the plastic back together like welding, works a treat.

@rebeccabaillie9584

3 жыл бұрын

Thats how I fix plastics as well!!

@NorthwoodsNomad

3 жыл бұрын

Nice tip 👍

@mozambique32762

2 жыл бұрын

@Andrey Angere I think it looks good to

@maddmavic

2 жыл бұрын

For 20.00 u can get a lot that has heated wires u melt in and then plastic weld over never tell they there or a break even happen

Great video, straight to the point, no fluff or off subject wormholes. Two thumbs up!!

Years of experience brought to you in 7min. The fork seal one was a new one, thanks!

@AP-vv1yu

4 жыл бұрын

Not being a creeper, I liked most of the comments to try to help with yt analytics. Hopefully more people will see.

@adambennett1193

4 жыл бұрын

old camera film is best as its made of that nice thin plastic and the debris moves to the little squares and gets trapped so when you remove it the debris comes with it easily

@kaaarchajdm

4 жыл бұрын

So you're saying that you put peper in your radiator?

@hk45c64

4 жыл бұрын

@@AP-vv1yu you're an awesome person just for trying to help. That's good on you my dude

@eric-hl8mc

4 жыл бұрын

I used forkseal one, and it did work...

Now all I need is a dirt bike 😂

@nicki3305

3 жыл бұрын

Lol same

@jimmycrackcorn6861

3 жыл бұрын

Q see

@kylespivey5405

3 жыл бұрын

now all i need is my clutch fibers to come in bought a 150$ 2000 rt100 and all it needs a clutch and cosmetic

@kylespivey5405

3 жыл бұрын

No Helmet Required no reason to be a dick either

@leggomyeggo9088

3 жыл бұрын

God this is like 9 months old now I need to find someone who is gonna actually give af what you have to say

I don’t even own a dirt bike but I’m watching this

@ivan_2k1

4 жыл бұрын

Ikr it's just very curious and pleasing to watch

@guitarscadillacs5049

4 жыл бұрын

Got one at my papys house it's a klx250

@jacobsweat9484

4 жыл бұрын

Yeah i ride bmx but i guess some stuff transfers

@kevinstearns4198

4 жыл бұрын

i watch for the laughs.

@SD-ir1vf

4 жыл бұрын

A dirt bike is 100% useless unless you have a good place to ride it. And not the street like a lot of people do.

1:19 i was waiting for him to pull out the ramen

As someone who does not currently own a dirt bike I can confirm that all these help

Hands down the most informative video I ever watched. When fitting a tube it's easier to push both beads down by the valve aperture, put the valve in with ease then gently pull the top bead back up then slip the rest of the tube in then fit the top bead (I'm a tyre fitter) 👍 I feel like a pro-noob now 🙂 Thanks 👍

Quick and perfect presentation. No lag, not boring.good job

Yo, some of those tips are awesome, The best tip i ever got though was from An ex factory Yamaha rider. To bleed your front brake's. Zip tie your front brake to the throttle so that the brake lever is totally compressed. and leave it overnight the next day all of the air will have leaked out of the system without needing to bleed the air out. brake lever will now be 100% firm.

This makes me feel like I abuse my dirt bike lol

@Jake_Hynds

4 жыл бұрын

Meh it's a dirtbike abuse away .. it shouldn't be clean enough to eat off of if you ride it most days

@babadagaa8352

4 жыл бұрын

westdot are we not supposed to?

@AnthonyGonzalez-zy5zm

4 жыл бұрын

I don’t own one but I would love to and if I did I would abuse the shit out of it lol

@dirtbikedude1325

3 жыл бұрын

Same I mean even though it does smoke after leaving it sit running for 5 mins

@duckyandbankstagging6275

3 жыл бұрын

I literally do🤣🤣🤣😭😭😭😭🤣🤣🤣🤣

I’m a pro bicycle mechanic and aquite a few tips I’ve seen transition over to Mx. I like to add grip tape to the ends of levers on brakes for a better fee and finger grip. Goggles tear offs I like to stager so I can pull them one one at a time without pulling them all off. Silicone spray for fork and shock stantions. Colored coded tools for faster identification helps me in high stress moments. Roll of gorilla tape for the rim surfaces. To name a few

Straight to the point. Love these types of videos

The grease on the forks for the leaky dust seals was an amazing idea!!!! I got more ride time cause this hack!! Good stuff yo!

The most helpful dirtbike/motorcycle video in the whole platform ( i think its abt what i have seen so far)

Finally a life hack video that is useful and short 👌🏻💪🏻

I’ve watched this video like 10 times I don’t even know why

@robbiejensen6161

3 жыл бұрын

same bro🤣

@k.johnson279

3 жыл бұрын

3 3

@forzzblade3116

2 жыл бұрын

Same

Amazing. I just got a dirt bike and now I am streets ahead of where I was 5 minutes ago thank you.

Quick and to the point yet still very useful information. Thanks!

To prolong goggle lens life, mount a tear-off and cut the pull tab away. This is a preventative measure against hard dirt or rocks ruining a lens as quickly. Remove and replace the tear-off when necessary.

@charlesgunzelman3323

4 жыл бұрын

Clean the inside of the lens with white shaving cream before a hot/wet ride. It keeps the goggles from fogging up. I keep a travel size bottle from the dollar store in my riding bag.

@varnesracing2270

7 ай бұрын

😂😂😂 as a racer that is hilarious. We go through tear offs faster than a flywheel makes a rotation

@DJSNT

7 ай бұрын

@varnesracing2270 This is not intended to be the 'only' tear-off. Rather, a last, ideally, non-pullable tear-off that will stay behind to keep the lens from taking a beating once you run out of the others. Basically, it's just serving as a 'lens protector'.

Great video and I've been doing this for over 40 years. Nice job!

Great video, I thought I would’ve know them all but I was surprised to have missed a couple...

Excellent. 7 mins well spent. Thankyou 👍👍

@TheMxFactory

4 жыл бұрын

Glad you liked it!!

More of these would be awesome

*The one dislike is a quad rider for sure*

@Manosteele67

4 жыл бұрын

Tommy Kula no I bet hey got a Bernie ad

@graphite1546

4 жыл бұрын

Quad bike suck to

@graphite1546

4 жыл бұрын

Cleaning a bike when it's not dirty somethings wrong

@420soap7

4 жыл бұрын

Gytis Stepo yeah no hate on quads there fun as hell too

@titandelosolimpos

4 жыл бұрын

kzread.info/dash/bejne/lZaqtMazYaq0l5M.html Motocycle 👆👆

If you don't know how to do up your helmet you shouldn't be riding

@ianparrott4688

4 жыл бұрын

blubcake everybody gotta start somewhere

@EctoGamer

4 жыл бұрын

what if you dont know how to do it because you just got a bike?

@buzzwerks2350

4 жыл бұрын

@@EctoGamer If you can't figure out how to do up your helmet, you are dead meat once you get on that bike. Even if you could decipher how to start it... not a given for someone who can't do up their helmet. You would then have to traverse the deadly minefield of physical coordination, dexterity, and balance to get it moving. Then take it out into traffic? Better buy a 'Busa and get it over with as quickly as possible. You won't be around long anyways, no need to prolong your suffering.

@666christ

4 жыл бұрын

@@buzzwerks2350 if you can start it, you can ride it.

@SchloopDeFloop

4 жыл бұрын

@@666christ no, even a 5 year old could start an electric start but it doesn't mean he can ride the bike

Some good tips ! Ive just furthered my education for the day. Now i can go on spring break. Lol Covid19 2020. Be safe all. We will get through this. Life from this moment on is going to be a huge change

Wow I work on bikes since 15 years and learned a lot here 👍🏿 nice to see how you grew. Saw your first videos.

Awesome as always - thanks!

@TheMxFactory

4 жыл бұрын

Appreciate the comment Andrew!

There always has to be that 1 special person...

@JimHerbertOutdoors

4 жыл бұрын

19?

@SoaringEagle1

4 жыл бұрын

Now 27......they're coming outta the woodwork now.

@riellyzz46

4 жыл бұрын

29

@hugoballs9075

4 жыл бұрын

They must be a vegan

@newman3059

4 жыл бұрын

34

Foot peg tool holder , I’m so happy you could share this , I’ve done this for years !

Omg thank you for showing the dull peg tip!! I have been so tired of jumping and i almost fall!!! Thank you!

@bikersoncall

Жыл бұрын

Don't forget to grip the bike with your legs/knees when you jump, especially when you jump.

Thank you the mx factory! The baking soda and super glue trick saved my back fender!🤩We are gonna use this trick for my brothers back fender too!

@hmfic802

4 жыл бұрын

Doooood, seriously...I had no idea. I need that hack for another project! Great tip!

WD40 takes off unwanted adhesive and shines plastics

@thcpsilocybin9978

4 жыл бұрын

@@jaysmokey suppose for a day riding on muddy rainy tracks or any gums; does wd40 works in between not to get the sticky muds onto the plates/ or any fender ?

@McNamEvan

4 жыл бұрын

Paint thinner solvents for sticker gunk work best

@gorky712

4 жыл бұрын

Pam vegetable spray works the best hands down cant beat it. And just for yall that dont know, the wd in wd four dee stands for water displacement lol

@koltenmeyers3584

4 жыл бұрын

@@McNamEvan you do have to be careful about what paint thinner you use and the strength though, I made that mistake and it melted my plastics

@joski9030

3 жыл бұрын

Water displacer clues in the name

Thx i just bought my first dirtbike crf250 2 stroke helped alot

Nice vid straight to the point

Do more I haven't finished the video yet but already love it

@TheMxFactory

4 жыл бұрын

Thanks a ton Zach!!

3:39 really helped me

Wish this video came out when I first started riding... took me years of mistakes to learn some of those hacks!

very helpful thank you. been needing some of these

Thanks so much man now I can fix up my bike Keep up the good work guys😇

@TheMxFactory

4 жыл бұрын

You’re very welcome!

VERY VERY helpful. thanks

@TheMxFactory

4 жыл бұрын

We are very stoked you guys like it 🤘🏼

There was a lot of useful dirtbike hacks that I’ll have to remember for the next time. Thanks for all the information 😎👍🏻

Great vid. More of these please

Using compressed air is the best way to install grips too, not just to remove. Also, I was never a fan of kinking the chain to tighten the axle nut, it is pretty simple to push against the back of the tire with your shin using your foot and hold it there while you tighten the axle nut. For cleaning the fork seals real quick you can also use a tear off. and That is not how you do tear offs at all! If you fold the tab under then it will not flip out for an easy grab. always fold the tab in on top of itself under the next tear off so that tab pops out when the above tear off is pulled. Some people like to place the first tear off on the other side in case they accidentally tear off all of them from one side at once, but the tab should still go above itself.

@Natedoc808

9 ай бұрын

I instantly thought the same thing about the tear offs.

Who doesn’t know how a d-ring strap works for a helmet???xD

@theravedaddy

4 жыл бұрын

99.9999999999999999% of thais. The 00000000000000001% didnt know what a helmet is.

Been riding a long time, I still learned and was reminded of some tricks. Thank you 🏁🏁🏁👍🙂🏁.

Great video, helpfull, no boring introductions

Bruh did this guy just say dump pepper in your radiator 😂🤦‍♀️

@officialmysteriousrider6327

4 жыл бұрын

Probably just acts like K seal People have used eggs in the past to seal rads so youll defiantly have a nice meal with pepper added

@motoxguy7

4 жыл бұрын

It works

@officialmysteriousrider6327

4 жыл бұрын

@@motoxguy7 i dont doubt that it wont pal

@motoxguy7

4 жыл бұрын

Mysterious Rider it is a temp fix, and it does work. You saying “doubt” makes me believe that you have never tried it and are just guessing your opinion....

@bronson3150

4 жыл бұрын

@@motoxguy7 have fun cleaning that out of your water pump

Do not use WD-40 when cleaning your chain, it dries out the chain too much, and it damages it. Use some kind of chain oil instead.

@juliussarmiento8921

2 жыл бұрын

WD40 is penetrating oil so it really does damage the chain thru the pins 👍

@operatorgaming1669

2 жыл бұрын

marvel mystery oil

Loved the duct tape wheel bands!

Excellent. Right to the tips, no wasted time!

forget the radiator pepper, i use cilantro and minced garlic with a lemon twist

who else doesn’t have a dirt bike

@MaxBergman-kq2ys

11 күн бұрын

I have one

This is very helpful for me as a kid just started riding 🙂

Thanks for the Great Video! 👍🏻

5:40 spray WD40 over adhesive.It's disolves it.

Nice one! Greeting from Germany. :-D

@TheMxFactory

4 жыл бұрын

Thank you!

Subscribed! 🙌🏻

great video. especially for a new rider

"31 Seriously Helpful Dirt Bike Hacks & Tricks" Probably the only video with this type of title that actualy is good. Thank you !

That was legitness!!

@TheMxFactory

4 жыл бұрын

Thanks Calcats!

such good stuff thanks!!

Thank you!!! It was great!

I love the mx factory intro it's like a video intro of an old video to play at like a school lol

Love your channel 👍 BTW, when are you uploading next video?

@TheMxFactory

4 жыл бұрын

We will have a few drop next week stay tuned!

@lilladen4289

4 жыл бұрын

Thanks!

Great video

Great hacks! Keep em coming

How to buckle your helmet is a hack?

@TheMxFactory

4 жыл бұрын

Hey 31 is our lucky number, give us a break 🤣

@mustanglegend1606

4 жыл бұрын

Bruh omg😂😂😂

@SD-ir1vf

4 жыл бұрын

But I’ve been riding dirt bikes for over 50 years and I didn’t know that.

@8180634

4 жыл бұрын

That was for the quad guys..

@dualsportdiary1150

4 жыл бұрын

@@8180634 😁😂😁😂

Perfect, more video for enduro and motocross in my channel

Loved it!

Great tips!

Thanks for the help im 14 and dont have anyone to help me with my dirt bike maintenance this should really help keep my dirt bike in the best shape possible

Being a mountain biker and waching the video is strange and familiar :))))

@guitarscadillacs5049

4 жыл бұрын

A stranger to our land... Jk moutan bikes can be just as hard sometimes

@JulianDaniel2003

4 жыл бұрын

Need some coolant hacks?

Really nice and useful.. I don't own a dirt bike but I'm one helluva fan of it and having a passion of owning and performing on one.. for me, an enthusiast, the video is so useful and motivating ♥️

want more video like this, great job

WD40 works great for dissolving sticker residue. Even on painted surfaces.

@johnguilbert1349

4 жыл бұрын

Also simple green or any degreaser will obliterate the adhesive.

Put an O ring on your fork tube when you rebuild.

really good and practical tips !

Another great video. Keep up the awesome job guys

@TheMxFactory

4 жыл бұрын

Much appreciated Jeremy

No bull shits, simply awesome tips. Greeting from Bali-Indonesia. Thanks

@TheMxFactory

4 жыл бұрын

Thanks for recognizing, Jason did a good job on this one!

“You need to put wipes in ur shoes so they don’t stink”him. Me:why can’t u just wash them🤦‍♂️

@technosausage

2 жыл бұрын

Dryer sheets. Not wipes. Some people's feet stink after one ride and it's impractical to wash them every ride

Great tips. God bless brother.

Dude great tips thanks.

6:30 helped me I am 8 years old my dad has to do strap

@corbin__1871

3 жыл бұрын

Yea if u don’t know how to do it it kinda gets annoying

@american_patriot1776

3 жыл бұрын

@@corbin__1871 I don't usually strap mine.

@corbin__1871

3 жыл бұрын

@@american_patriot1776 u don’t strap yours ? Or your dad straps yours

When you put the chain link ' clip ' on the chain. Put the opening so it faces REARWARD to the travel of the chain. This reduces the chance of getting rocks/debris hitting the link clip and opening it up.

Хорошее видео, полезное!

Wow! Great tips. That’s for sharing.

3:01 OMG xd

@tbroogrape5445

4 жыл бұрын

Stefixx 10 ikr he be hamming it

Imagine not already knowing all these

@andries4561

4 жыл бұрын

Okay Mr know all

@kingcrumpet

4 жыл бұрын

Ok so everyone is just born knowing these 31 'hacks'? You should look up the Dunning-Kruger effect as I think it applies to you.

Some really helpful tips here !! Thanks

Great tips.

Anyone not like that the coments are so much closer

@TheMxFactory

4 жыл бұрын

🤷🏼‍♂️

Just if someone invented a footbeg that never looses the 10mm and 13mm sockets 😞

@victorcordova8338

4 жыл бұрын

Poor Coyote you mean 10mm and 12mm...no one uses 13mm

@simon2625

4 жыл бұрын

Victor Cordova you dont ride dont you

@theonlygamer4131

4 жыл бұрын

@@victorcordova8338 german bikes are also normal 10 12 and 14 mm

@McNamEvan

4 жыл бұрын

8mm so elusive

@victorcordova8338

4 жыл бұрын

mcnameva front brake lever, clutch lever, plastics, clutch cover, stator cover, camshaft towers... I use 8mm on a daily basis tbh

I learned a few things. Good video!

Beautifull video!!!!

The baby powder on the tube is so when you inflate the tube it doesn't pinch. Not to keep it from spinning inside the tire. 🤦🏻‍♂️

@MarkMark-ud7wf

4 жыл бұрын

Can also bounce the wheel a few times with tube half inflated to avoid pinching