Thanks

I would have loosen the screw by the loose gear, push gear up tight and then tighten back down. Too much play there for a plastic gear

Thank you!

@JonesN4life

6 жыл бұрын

Your welcome

Can’t find any help on this motor. Sounds like I have power but prop won’t spin. Here a clicking noise in the housing. Maybe you can help

@jonesnlife380

2 жыл бұрын

Start by checking the power to the leads going down to the motor if you have proper voltage there disconnect the power and Ohm across all the leads coming from the motor then to ground if you get a tone the motor is bad