When you said “don’t forget it’s butt” I cackled😂😂 thanks for another great video !!

@DuncanCustomAirbrush

3 жыл бұрын

🤣🤣

So glad to see you doing it exactly how I do!

@DuncanCustomAirbrush

3 жыл бұрын

You got it!!😉👍

You always make me laugh 😂 Does your wife still find you hilarious? 🤣 do your kids? I need a family Q&A video!! I want to know all the Duncan things!

@DuncanCustomAirbrush

3 жыл бұрын

lol, I believe my wife has become immune, and my 12 yr old boy recently told me I am embarrassing sometimes 🤣🤣. My little girl still thinks I'm awesome though😉👍

@Hyggebugg

3 жыл бұрын

@@DuncanCustomAirbrush 1 out of 3 isn’t bad 😆 I’ll be waiting for the family Q&A! All the cool kids are doing it!

I'm so excited for this videoooo!!!! Yayyyyy!!!!

My God! I think you may have just told me what my issue is with my last two cups!!!!! Thank you SO much!!! 💕

When you busted out with Careless Whisper, I actually cackled. You are so funny!

@DuncanCustomAirbrush

3 жыл бұрын

🤣🤣

@carlaschlesinger5434

3 жыл бұрын

Hilarious!

I have no intention of ever recreating these absolutely gorgeous toomblers, but you are just so darn funny!! I keep watching your vids because I have to pause to laugh then rewind and watch again, several times per video!!! 😂 Oh yes and also you are incredibly talented yes 🙃

Yes!! Just learning, I didn't even know to mix both them😅🤣 having adhd I had to slow down and really learn about it, I thought one was gloss and one matte🤦‍♀️🤷‍♀️ but loving it now still learning. Got stripping tumblers down pat😅🤣 I don't give up!!!

Thanks for the tips I will try them out. I keep getting fish eyes. Love your videos!!

I don’t have a heater, but I got out my little coffee cup warmer thingy-sat my medicine cup of epoxy on it while it was warm and mixed it-oh my goodness gracious!!! Game changer! Absolutely no air bubbles! It makes me want to try some deeper pours-and the labeling of the lids is gilden! thanks for the tips!

@DuncanCustomAirbrush

3 жыл бұрын

Awesome!!!

thank you so much for your videos... I love all your videos, it helps me a lot get through my depression... I'm now planning to do my first customize tumbler... hope to see more of your video...

@DuncanCustomAirbrush

3 жыл бұрын

Thank you for your kind words - praying for your strength through your depression 🙏

@tolentinolalcarhoma2710

3 жыл бұрын

@@DuncanCustomAirbrush Thank you... bless you more and your family... ( sending lots of love from your fans here in the Philippines )

I learn sooo much from you. Thank you!!!

@DuncanCustomAirbrush

3 жыл бұрын

😉👌

Thank you so much for this, this really helps out!

@DuncanCustomAirbrush

3 жыл бұрын

Great to hear!

Great video! Thank you for sharing, Taylor.

@DuncanCustomAirbrush

3 жыл бұрын

Thanks!

Thank you!

Ty for the tips and video...keep up the good work n videos!!!

@DuncanCustomAirbrush

3 жыл бұрын

Thanks

Thanks - - just love watching you lol

@DuncanCustomAirbrush

3 жыл бұрын

Thank you!!

Its the "whoooo" and "dont forget its butt" for me 😂 You make tumbler tutorials fun to watch.😂

@DuncanCustomAirbrush

3 жыл бұрын

lol

Duncan I love your energy and happiness in your videos! I want to make them but not sure how to do the intro grAPhics! Can you please help me with this and video editing? PLEASE

Nice. Thx

Love watching, you’re very entertaining. Do you have a video from beginning to end- no final steps. From sanding, painting, epoxy and all final steps. I finally have all the supplies I need to make my first tumbler. I don’t want to miss any steps. Thank you!!!!!

@DuncanCustomAirbrush

3 жыл бұрын

Hmmm, I have never thought about making a video like that - what would the title be - what kind of tumbler would I make 🤔

@Nelswifi

3 жыл бұрын

@@DuncanCustomAirbrush well my first thought I’d ask your wife because the duo team cup came out sooooo gooood But maybe title something like don’t stress you newbies just do it

The shipping cost the same price to bad I would love to buy I am in Quebec Canada, love all your video and you are so funny.

Thank you for this! I already do all of these things, and getting a smooth coat is still hit and miss for me. I’m fairly certain that there are evil epoxy spirits haunting my studio. Weekend before last, I did everything exactly the same as I have always done, and every tumbler I put epoxy on repelled REALLY bad. I’ve never had any issues with epoxy repelling before! It’s so frustrating to think I’m on the final coat only to find the surface full of bumps. I wish there were tumbler makers in my area who were willing to get together in person for tips & tricks meetings.

@DuncanCustomAirbrush

3 жыл бұрын

Humidity is a booger for epoxy too👎

Every time you say focus, I think you're talking to me😅🤣

So do I need to mod podge after this? I’m new to tumblers and someone I know told me I need to use waterproof mod podge at the end.

do you use the same technique- with more time in between the 2 coats- with regular epoxy?

Sorry I am new and just found your channel....is there a difference between the torch or heat gun?

How do i prevent small circular "holes" in the epoxy coat. They seem to form as it is drying. Is that why you put a second coat on? I used flat black paint, but I still get them. Are they "fisheyes?"

You can also microwave it for 5-10 seconds depending how much you are mixing. You know Mother Nature is about to crank up the temps. Do you use the heater during the summer? I also found it is much better to mix in small batches. I have some cups to work on today and I was also going to try warming the cups slightly before I apply the resin. I've noticed that when I spread the resin (I use the same method as you.) it will cool suddenly and not be as fluid in parts. I feel like pre-warming the cup just a little might help a lot.

@Theresa914

3 жыл бұрын

I would not think it’s safe to heat in your microwave you use for food.

@DuncanCustomAirbrush

3 жыл бұрын

Heating the cup might be a good idea👍

i have been having problems with "holes" forming in my epoxy coating. only in my tumblers not when i do a vase. i dont do anything different. any ideas?

Awesome! I've been looking at that but wasn't sure how it worked, I love how it doesn't take as long. Can I use this as a top coat as well as the others? Thanks for sharing. :)

@DuncanCustomAirbrush

3 жыл бұрын

yeah i use it as a final coat too

Another amazing "Apooxie" vid 🤘

@DuncanCustomAirbrush

3 жыл бұрын

🤣

This is beautiful! What color glitters did you use and where did you get them? Thank you for your wonderful videos.

@DuncanCustomAirbrush

3 жыл бұрын

The glitters are mentioned in this video here: kzread.info/dash/bejne/dGp3k7ylg9KXe6w.html

i am glad i found your videos..new to this game and wife and i spend time together learning and experimenting making tumblers.. can you give me any information on your spinner that you use, it seems having a dependable spinner is half the battle. Thank you

@DuncanCustomAirbrush

2 жыл бұрын

That is fantastic!! I made my own turner, but you can buy them also kzread.info/dash/bejne/e4V1wcedaM2Xqqw.html

@mikeh1348

2 жыл бұрын

@@DuncanCustomAirbrush after posting for your help I found your video I will make one this weekend thank you again

Great tips, thanks for sharing!! btw, is Alumilite Amazing Quick Coat your everyday epoxy now, or was this more of a test/review? Just so many options out there, it's hard (and expensive) for us beginners to keep jumping around.. I ended up getting just ACC, before I did enough research but after this video I may end up restocking with Quick Coat!

@DuncanCustomAirbrush

3 жыл бұрын

If I had only one to pick that I could use, I would get the regular ACC

@BobMcKinley

3 жыл бұрын

@@DuncanCustomAirbrush Thanks!!

When using regular set epoxy can you put a second coat on during the “tacky” stage? Tacky tacky tacky.

@DuncanCustomAirbrush

3 жыл бұрын

yes, I do

So you put A and B in the same cup? I’ve been using a cup for each plus another one to mix.

@DuncanCustomAirbrush

3 жыл бұрын

I do if there is enough room to mix

Omg. I mark my .measuring cups too.

@DuncanCustomAirbrush

3 жыл бұрын

Great minds think alike!!

Do you prefer the kitchen torch or the torch in this video?

@DuncanCustomAirbrush

3 жыл бұрын

The big boy camping butane torch

What are you using to spin the tumblers as you coat them with the epoxy? I painted my tumblers and have an epoxy kit ready now to use. Can i do it without that thing spinning them?

@DuncanCustomAirbrush

2 ай бұрын

I made my own - I have 2 vids on my channel that show how I did it

I have never had a tumbler turn out completely smooth. Always a couple tiny bumps, like tiny grains of sand. Any ideas? Usually torch twice.

@DuncanCustomAirbrush

3 жыл бұрын

You rub it really good?

@glendawente7317

3 жыл бұрын

@@DuncanCustomAirbrush Well, I thought I did. I'll spend some more time on that next time. 😊 Thanks

So is epoxy the only way? you wouldn't recommend a water proof clear coat. Just curious as to why clear coat wouldn't work? Thank you!

@DuncanCustomAirbrush

Жыл бұрын

I have used automotive clearcoat before. Some people have used mod podge

@matthewmickles1997

Жыл бұрын

@Duncan Custom Airbrush I found this water proof clear coat stuff, just wondering what's the difference or which is better, but epoxy seems like a pain over clear coat.

How do you put your logo on the bottom of your cups?

@DuncanCustomAirbrush

2 жыл бұрын

I sign it with an 18k gold pen

I want to start making things with epoxy/resin. Start doing my own tumblers, moulds, etc.... I don't know where to start. There are so many epoxy/resins. Mica's. Alcohol inks, pigments. I'm so confused.

@DuncanCustomAirbrush

3 жыл бұрын

I would say for moulds the Alumilite Deep Pour - thin and takes longer to cure so it has zero bubbles. For tumblers I would get Alumilite Amazing Clear Cast and a set of the Piñata alchohol inks - of course you would need a turner also

How's the odor on the quick coat?

@DuncanCustomAirbrush

3 жыл бұрын

haven't noticed any odor at all tbh

You're so cute it's ridiculous. I literally said that out loud watching this video. 😊

@DuncanCustomAirbrush

2 жыл бұрын

🤣🤣Thanks!

How do you keep your cups from being sticky after they cure. What am I doing wrong

@DuncanCustomAirbrush

3 жыл бұрын

You may not be getting the 1 to 1 mix ratio correct, or not mixing well enough

@jeffreypugh1200

3 жыл бұрын

@@DuncanCustomAirbrush i think you are right. It must be off a little bit

Can I ask what kind of heater you have there? Is it a heater you plug in?

@DuncanCustomAirbrush

3 жыл бұрын

Yeah, it is like a portable plugin Steelton Tools oil filled radiator heater

@roseannabrown6554

3 жыл бұрын

@@DuncanCustomAirbrush ok thanks that’s what I thought it was. I think they are cheaper to run, I was thinking about getting one for my she shed 😬

I dont have a torch. Will a heat gun work the same?

@DuncanCustomAirbrush

3 жыл бұрын

ehh

@truthhurts3905

3 жыл бұрын

Does ehh mean yes or no, I have the same question.

Can you use this making boards as well

@DuncanCustomAirbrush

3 жыл бұрын

probably.. not sure what kind of boards you mean

@kyliemurray9528

3 жыл бұрын

Like chopping boards

So can this be used as your final coat?? if so, I'm so on it!

@suzanslayton3308

3 жыл бұрын

I was wondering that too.

@DuncanCustomAirbrush

3 жыл бұрын

yes, i use this as a final coat too

@raisingnana

3 жыл бұрын

@@DuncanCustomAirbrush Well.. THAT is a game changer right there! I will be getting some to try~ Thanks!!

@rochelleslover3074

3 жыл бұрын

As a final coat does it have a UV protection. If not is that okay? When is it important to have UV protection and when it’s not so much a worry? Sorry! I’ve been trying to find a way to use my UV changing glitter and micas but all the “compliant” epoxy has UV problem and kills the effect 🥴 so if I can just use a quick coat as a final it may solve it 🎊🎉

@DuncanCustomAirbrush

3 жыл бұрын

I has very little UV protection because of the trade-off it make it cure faster - if that makes sense

When he played the George Michael music I cracked up. 😂

@DuncanCustomAirbrush

3 жыл бұрын

🤣🤣🤣

Have you done domino's if you have how much expoxy did you use.

@DuncanCustomAirbrush

3 жыл бұрын

I have not

@sandypradmore2654

3 жыл бұрын

@@DuncanCustomAirbrush thank you

"You know, how any of us would want to be rubbed down with epoxy" ha ha ha ha

@DuncanCustomAirbrush

3 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

My hubby wants to start doing airbrush. Do you have beginners videos about airbrushing? Could you hook me up with a link. Thanks my friend hugs Sheryl

@DuncanCustomAirbrush

2 жыл бұрын

I do!: kzread.info/dash/bejne/gKCIp9l_hsXFh6g.html

Can you use a heat gun instead of the 🔦🔦?

@kimlandis4360

3 жыл бұрын

I use my heat gun and it worked great👍🏻😁...just got my torch & it makes me a tad nervous that I may burn my epooxie 😱🤭😬🤣🧋

Your wife has to really love you, if you treat her like your cups!

@DuncanCustomAirbrush

3 жыл бұрын

🤣🤣no way...I'm super gentle

I have MUCH better luck measuring out part B first. I like to remember B- BEFORE. A- AFTER

@DuncanCustomAirbrush

3 жыл бұрын

I usually do that if I don't preheat it on my heater

@kristendebow9905

3 жыл бұрын

Yes, heating really is a game changer too!!!

Please help me I'm scared to do epoxy and everyone is doing it in ways that its making it hard for me. Please help me Duncan 😭😭

@DuncanCustomAirbrush

3 жыл бұрын

You just have to do it, fail, and learn. Then do it again. And again.

You make me laugh!! I'm pretty new to epoxying tumblers and all has been good so far until I accidentally threw my "empty" epoxy cup in my new stainless steel sink... Ummm... Ya that epoxy isn't going anywhere... 🤦

@DuncanCustomAirbrush

3 жыл бұрын

OH NO!!😱 You all learn my bad habits of throwing things!!🤣🤣

I would love to buy the epoxy but cost almost the same price that the epoxy.

Awesome video about epoxy tumblers! Are you open to collaborate?