How a chevy door latch works
Тәжірибелік нұсқаулар және стиль
Follow us here!
SCOTTYS MOBILE DETAILING
scottysmobiledetailing.com/
Main KZread Channel
SCOTTYS DETAILING
/ scottysdetailing
2nd KZread channel
THE SMD STUDIOS
/ thesmdstudio
LINKEDIN
www.linkedin.com/
FACEBOOK
TWITTER
PINTEREST
/ scottysdetail
Пікірлер: 194
It's starting to rain and one door of my Chevy S10 wouldn't close! I studied the other door, trying to figure out what to do, and succeeded in jamming it as well! This was the THIRD video I checked. Holding up the outside handle while moving the latch worked like a charm! THANK YOU!! From a 79 year old widow lady!
Thank you so much. Nobody has info on the actual latch. Great detail. Really appreciate it.
Thank you for your video. I tore my door down and by the time the back-ordered parts arrived (an entire month after I ordered them) I completely forgot what went where... you're a life saver! Thank you for the great video.
Glad I found this video, working on a rust bucket that the door won't open from either side
These are the type of videos that are really helpful in understanding what's going on. Thanks!
I really appreciate you for the bench demo your detailed bench demo in layman's terms was excellent. I was thinking the same had its own locking mechanism built into the latch.
I'm so happy I found your video!! All the others weren't as nearly as helpful as yours budd!! Now I can fix my dad's latch on his astro van..🙏🏼🙏🏼🙏🏼
Scotty, thanks to your video I resolved my problem in a matter of two seconds. It's all working great now, thanks so much.
Thanks a million! I have a suburban that has had its door locked for 5 years! With your help I was able to open it and fix it myself. Thank you
thank you for going out of your way to do this. it wasn't the video i was looking for but it gave me better insight into what my problems could be
I have looked at more videos than I want to say trying to find the info you provided in less than 5 minutes . Thank you !!!
Thanks for taking the latch out and explaining how it works and what all the rods are for. I was changing my handle, put it back together and it wouldn’t work. The clip fell off and i found another rod that was disconnected. I knew it had something to do with the outside lock but had a hard time figuring out where it went. Your video showed me where it connected. I went back at it and go it done. Thanks. I owe you a mechanics fee.
I was fighting my latch for about 30 minutes for no reason. I watched your video, Solved my problem in like 2 seconds.
Scotty, I am such a dummie. 2 and half hours trying to fix my door latch and after watching your video for 5 minutes I fixed my latch in 1 minute . Thank you and Merry Christmas !
@ScottysDetailing
7 жыл бұрын
sam ursetti -Trust me I've been in that position before.
Thank you so much for making and posting this video. Your instructions were clear and understandable so I easily unlocked my car door.
You just saved me so much money and time. thank you so much. I needed a visual on how a locking system works on a chevy. this way I was able to go in and figure the problem in detail. thanks again.
Scotty! just what I needed to hear, clear instructions, I replaced the latching system in my old 2003 Chevy express and I didn't link the exterior door handle to the latch and so Thanks to you Ma friend! I know exactly what to do to correct the install, Thank you so much! , Excelent tutorial on the door latch mechanics.
I just wanted to say thanks for this video ! Very helpful and well made. I appreciate it !
Cool Beans Scotty! Worked Great! Latched wouldn't latch after heavy rain while I was out. Door wouldn't close. Came home, KZreadd "chevy astro passenger door won't shut." Up came your video and BINGO! You were spot on. Thanks a million!
@ScottysDetailing
8 жыл бұрын
That's why we do what we do.
@leontaylor3572
7 жыл бұрын
cool beans. I use that to phrase too. hahaha
Hi, this is good info. but I have a question. My '99 Tahoe and my 96 Silverado 4x4 both have the lock cylinder fall back into the door. Do I need to replace the entire outside door handle with new locks, or can I find the old ones and put them back in place. Or further, just buy new lock cylinders and not have to replace the handles. I've already changed the inside door handles on the Tahoe, both sides are broken off. Hope you can help, Thanks.
This helped me so much. The patch was stuck. And I couldn’t fix it before. Thank you so much. It saved me so much time. 👌
@oceanicwave1925
5 жыл бұрын
Latch *
thank you so much for your videos. i love astro vans. and these videos will help out so much. again thank you and keep up the great work. my best to you and your helpful family.
thanks for the videos, all of your Chevy astro Vida have been useful to me
Thanks for the video. You explained it very well, this will help me out tremendously. My door handles from the outside does not open on driver’s and passenger side but open up from the inside handle.
Thank you! That run through of the mechanisms helped me a lot.
Hi Scotty, Thanks for the informational astro videos. My driver side lock on my astro sticks. it will not lock or unlock with the key fob. however if i lock or unlock manually it works.. the actuator works because i see the lock attempting to move. I am thinking that top lock part is just gunked up with stuff. any insight? should i spray the to of lock mech with lithium grease?
Dude! Excellent! We owe you a beer for sure!!
I like the fact the you added a sequence for re-assembly the helps tremendously!
Excellent compliment to your previous videos.
Thanks you saved the day for another mechanically challenged repairman.
Thanks for the video. Saved me a ton of time pulling my passenger door apart to get the same info.
I can't seem to find your video on how to remove the latch do you have a link to it?
Thanks for the video! I never would have made it without your how-to!
THANK YOU FOR THIS VIDEO, got my door latch unstuck. Just open the inside handle and then with a key or small screwdriver lift thedoor latch, works like a charm.
@ChristianClayton2000
2 жыл бұрын
Where do you put the key when you’re trying to get it unstuck?
honestly though you provided the exact knowledge i needed, thank you so much
Hey Scotty, I know this vid is from a while ago, but the jaws on that latch, are the coated with a plastic molding? And if so, when they're worn, would that cause the door not to close and seal tightly? I am having lots of wind blowing in while driving and also a loose door on the striker, not at the hinge, as I replaced them.
This was great! Do you have a video on how to adjust the door lock settings and the striker so you don't get binding? Mine tends to want to 'stick' when opening the door...so it seems the lock is sticking to the striker...which can be a bit typical of 3rd gen camaros....doors sag. But mine are good right now, I just need to adjust so they close/open smoothly. Thank you!
THANK YOU !! solved my problems in seconds!!
Thanks a lot for sharing. It saved my day
Hey scott i have a monte carlo 2001 the door wont close but the latch it stays down but I won't come back up now do I need a new door latch or what should I do....
after struggling with the d&$@*m thing for 1/2 hr, watched your video 3:40 min. - figured out which lever to press - and walla - cam retracted, re-assembled and working! - a big thanks for your expert advice! ben
@ScottysDetailing
8 жыл бұрын
That's what we're here for to help brothers out, and sisters too🤔
Good information. I have a 65 chevy impala. I can't get the drivers door open from inside or outside. The door body lines or lined up. I don't no what I can do. Thank you if you can help
thanks so much... watched for a couple minutes, learned how the latch operated and you just saved me stress, time and headache. door fixed and closing in 10 seconds after having to make two trips into the city holding the door from the inside so that it wouldn't swing open, lol. thank you!
I'm glad I found this video! Thank you
I've got a 97 chevy astro van that has a linkage problem with the door handle linkage. I got some removal and re-install door latch assembly tips, but what is a fix for linkage that won't open door from outside handle 🤔. Clearances with the door lock linkage seems good! Stumped on it!
Thank you for this video :) .It saved me a huge headache.
You deserve more likes than gangam style! I got my 98 sierra and my latch won't release the striker, I ran out of ideas!!! hopefully I figure something up after this video...
oh gosh thank you , I'm glad to have found your video
Thanks to your video I just fixed my door on my 99 Chevy Sub, that would not shut, myself. Thanks a million!!
@ScottysDetailing
8 жыл бұрын
You are very welcome🤗 and thanks for watching our vids and wish you the best of luck with further repairs.
Great video!! Thank you for doing it and putting on you tube ,Question,my sliding door on my 94 Astro is stuck closed ,is there anyway I can in stick it with a screwdriver and w d 40. Thanks very much Scott
@markladder5203
5 жыл бұрын
Scott Ferrell - how did you fix it?
Hey Scottys I have 92 chevy Gmc pickup and the driver side door want close tight .. ? do I need a new lock are do I need to readjust the lock
Hi Scotty... I have a 1994 Chevy astro and have problems closing the rear window since won't latch to the door strikers ( one in each side) Do you have any video available where I can check it out?...Thank you for your helpful videos!!! :)
how did you clean it and what did you lubricate it with?
I broke mine today!!! Thanks for the video! I think the most of them have a similar function!
That is a good demo - what should I look for if the indoor does not open the door but the outside handle does. I checked the rod and its engaging but will not release the latch
thankyou man!! this really helped save me a headache
Thank you for this much appreciated👍
you saved the day thanks Scotty
Can you make a video for how to release door manually, I bought the truck this way. Inside or outside won’t open it. I believe the latch is in locking position on the striker. Thank you.
When you soaked in gas is there grease or oil you need to replace inside latch?
I can't seem to get the latch out of the door, will not fit down through the window guide & the door. Do you have a video showing that? 97 astro
Good info . Solved my problem very quick. God Bless You !!!
@markladder5203
5 жыл бұрын
cesar gonzales - what did you do, please share?
Should a person lubricate the lock? Thanks for the video.
Thanks Scott, helps a lot
I'm having trouble with a 67 Chevy pickup. Are the door locks much diffrent from this?
Best video I’ve seen yet…. Now for my problem. I’ve got the interior panels off what DI I have to do to unlatch it? 1999 Chevy truck, drivers door. All the rods appear to be connected and working but door doesn’t unlatch. Neither the outside or interior handles open it. I’m thinking it’s not unlocking but I can’t tell. Ideas?
I LOVE YOU MAN! THANK YOU.
Great video I definitely appreciate it!!! :)
And that the video I need Im getting tried Of doing the Duke of hazard. How do you Manuel release the latch my rod want release the latch no matter how hard I pull.
@unrepheretic
9 жыл бұрын
jaybo107 If you can get the interior door panel off, there is a tab on the actual door latch inside the door that releases the hook on the door striker and opens the door. Of course, it is very small and can only be reached by reaching under the lever that the door handle raises on the latch using either a screwdriver of some other kind of tool. It is rather difficult to find, but if you lock and unlock the door while looking at the lever on the latch inside the door, you will see the tab moving back and forth.
My truck was broken into with the keyhole. I bought a door handle without the keyhole to avoid a second brake in. So I took off the rod that's connected to the key cylinder. Then I started to have problems with the interior door rod that you can see go up and down. Is it because of the rod I removed ?
Is the shortest rod the outside lever?
Thank you so much for this video! I found it via a Google search after pushing the latch down accidentally, and being stuck outside in a cold rain desperate to find out how to close my door. Granted, the answer was so obvious (lift the handle while pushing the latch back out) that I feel pretty silly, but all the same, thank you kindly for having this up. Saved the day!
very good gracias por compartir tu buen trabajo me sirvio de mucho
thank you I will definitely use this advice
I have a 05 and the car was hit on the passenger side. The outside handle feels loose. The inside does not. Is this same latch used in my truck? Can I pick the door open?
tks great video Scotty
I want to open the door, but the door handle is missing completely from the outside. any way of reaching in and opening the door manually from the latch?
Good explanatory video. Thanks.
is there any way of pulling on the outside door lever, by reaching in the door as the outside door handles are missing? if you know what I mean
2009 traverse. Passenger rear door lock is broken. Door is open but locked! Got it to close after pulling the srriker with a scewdriver. Is this something a little wd40 can fix or do I need parts? and for the parts... do i buy a striker or door latch assembly?
@ScottysDetailing
8 жыл бұрын
I would pull out the doorlatch and let it sit in gasoline overnight, lube it up and put it in the next day.
Thanks! Best advice😊
Has anyone ever told you you look like Tom Arnold? Great vid. Thanks!
Is there any way you could fix an door lock actuator, I got a 2008 GMC yukon with 3 of them failing the replacements are pricey . Thanks
@ScottysDetailing
9 жыл бұрын
Check out 1aauto.com they have replacement door locks actuators not to expensive.
Yep, good video. Thank you Scott :)
I have a 97 chevy astor. My outside door handle broke and I replaced it. It worked fine for a couple of days and now the door will not open from the inside or the outside. And now both doors will not open. The other door that I did not work on will only open from the inside and the door that I worked on will not open at all. Like I said they both worked fine a few days after fixing them and now this. What do you think it is? I think is has something to do with the locks. But how do I get the door open that I changed the handle on to adjust the lock? Thank you. Your friend Bryant from North Carolina.
@JAMES427CARROLL
7 жыл бұрын
Dude I'm in the same boat. I replaced driver & passenger outer door handles. Everything worked fine until a couple days later the driver side door won't open. And I too feel like it has something to do with the lock mechanism. I looks like it goes all the way into the lock position, but when you try to slide it to unlock it only seems like it slides halfway. And I can't really get the door panel off because it's impossible unless it's open. So yea. Im all out of ideas. Any help would be greatly appreciated. HELP SCOTTY!!
What if the door latch wont stay closed? People have problem with the latch not releasing, mine wont stop. It's like a spring is keep it from staying closed. Cant find anything wrong. Any advice?
Our 91 Chevy conversion van has side doors instead of sliding doors. All of a sudden the left door latch no longer catches. Therefore the door is really not locked. Any ideas?
Working on these mfs inside the door is hands down one of the most frustrating things i've ever experienced.
Funny lol I've been there before. Thanks for your feedback.
How or what did u use to disconnect the rods.
you are the man
I put in the latch then hooked all the wires in, but when I pull the out side handle nothing on the door panel moved I then close the door but I had to open the door from the in side leveler. I check to make sure every thing move freely. But I fail to remove the out side latch when I do pull on the door handle it moves out and in but it won't open the door. So after viewing your program I will disconnect the out side handle. it seen to me that the door handle is not doing any thing when I pull on it. Sir Your presentation is a great. I will try again.
If it's no longer locking .. that means the latch has failed correct? I thought it was the actuator but it wasn't.
Thank you for the information now I know where I screwed up!
My door doesn't close fully when I shut it, unless I slam it. It stays half-latched, but slightly ajar. The pin seems to be aligned vertically with the latch, so I'm not sure what's causing the problem. It just seems to bounce open a bit. Any ideas?
I made sure that the latch was working before closing the door but it still locked up with the door closed. Any way to get that open short of cutting the striker pin through the door slot? I think the problem lies in a faulty latch not the lock assembly.
door latch mechanism on my bonneville pontiac 1990 LR door I'm working on / Actually both rear doors won't open from outside or inside. the rods are bent i think and unhooked. after crawling in the back seat many times in and out to get tools. I finally gave upon turning the right thing the rod would of turned to open the door. Could be its not working , or just all the rods hook up on the back side i can't see. so I finally went through the seal to the round pin it latches to with the torque's head and started bending the inside I can straighten where nobody will see it till I was able to force the jam thing jaws around the pin it locks on when door is shut . Now with the door open. I of coarse need a new 16631627 or I 'm going to a donor car a 1986 delta 88 royal sedan I never hauled in. I guess I have the ribbon type window opener all has to come out to get the rear of window guide out ot the way to replace door lock mechanism . then If i get though that left rear door I still have the same thing with the right rear but I might learn well the lock mechanism door latch thing is in my hand, what I was supposed to trigger to release the door to open the jaws on the latch.
Helpful, thank you!
approximately what is the cost for a mechanic to do this?
I broke the inside door lever on a 1998 Chevy 2500 PU passenger side. I replaced it and the outside one broke. I replaced it and it would no longer work at all. I replaced the whole door lock actuator assembly. Now if I lock it, I cannot open it. Any suggestions?