I've just bought myself a 2024 Canyon Aeroad and the first thing I've changed is the Wheelset and the Rotors. Been using Hope Rotors and brakes on my MTB for a few years now and love them, never ever had an issue..

Nice video! I’ve been using Hope rotors on my road bike since June last year without any issues. After a long steep decent I heard them ticking as they cooled, like a car does sometimes, but they didn’t warp or rub. I’m very happy with them. I was already aware of the benefits from a floating brake rotor from the car world, and the fact they came in purple was an instant buy for me.

@ribblevalleycyclist

Жыл бұрын

Hi TheTone, Yeah, they're a great product. To be honest, as they're roughly the same price, I don't understand why people still buy the Shimano ones..... Knowledge I suppose. Thanks for watching. Jon

@buckroger6456

Жыл бұрын

Team purple 💪 I'm running floating rotors as well with their 4 piston brakes 😀 loads of killer stopping power. Sure it might be a little over kill, but that's just my style.

Awesome Video thanks!

I replaced my 160mm Shimano center-lock's on my gravel bike with Hope, first and foremost, for the BLING factor! (Red spider to match my red frame) Crazy expensive here in the US at approx $100 US EACH including the matching lock ring. But they look freekin' awesome so it was worth the money to me. I have noticed I have to true my Hope rotors much less than my Shimanos. I hate any pad rubbing at all and it seemed like I was tweaking my Shimanos all the time. With the Hope it's rare which is an added benefit to the bling!

@ribblevalleycyclist

11 ай бұрын

Agreed they're an amazing bit of kit, and it's just fit and forget! I love the way they make a clicking noise after coming down long descents as the rotors cool and shrink back to a normal size. Yeah, agreed, the cost of manufacturing by hand and the cost of shipping them out of the UK makes the price very high. In the UK, they're £42, which is roughly $53USD

Good to know. These look like a good alternative.

Hi Jon, Thanks a lot for making this helpful video! I am looking for a new disc rotor and looked at the other discs Hope makes. There is also a "Heavy Duty" disc from Hope, this one is 2.3mm thick. I would think that this thicker rotor would absorb more heat than the "standard" version. But it's a non floating construction. Do you also have experience with this thicker rotor? I'm riding a heavier Rohloff touring bike (20kg), and my own weight is 95 kg. So during long descents in the alps heat could be an issue. What are you're thoughts on that? Thanks you, Jon, Kind regards, Toon

@ribblevalleycyclist

Жыл бұрын

Hi Toon, Sorry for the delay in responding. I don’t have experience with that specific disc, but I have used other brands that come in a little thicker. The most important advice I would give is to consider if there is room to accommodate a thicker rotor, it may rub. Also, you’re correct, the thicker rotor is less likely to warp. The team at Hope is very responsive, it may be worth dropping them an email and asking the question. My opinion, the floating rotor would probably be fine, but the thicker rotor may be more efficient and last longer…… if it’ll fit. Thanks, Jon 👍

Two more points. 1. Shimano rotors use a steel/aluminium sandwich technology, which is lighter and more delicate, so they are more prone to going out of true if you knock them, whereas Hope/Sram etc. use laser-cut steel which is more robust and heavier. Many times a rubbing rotor is due to a physical knock rather than thermal expansion issues. 2. Not all rotors are the same thickness. Thicker = better braking and more weight. Hence why e-bikes/mtbs use thicker rotors and roadies are on weenie thin ones.

@ribblevalleycyclist

Жыл бұрын

Good points, Adam. Thanks for adding 👍

@Fugitive_8

11 ай бұрын

The actual reasoning why 180-220mm rotors arent used on road bike is primarily because it doesnt fit onto the hubs the size is also extremely large so balance point from left to left and thats mainly why roads have 140mm instead while ye bigger rotors mean stopping power and heat absorbent they couldnt fit 180mm rotors to the wheel so ye js another fact

I am using them since 2016… they are great BUT with sram rival and sram force - they seem not work very well, they are quite loud and do not perform like with shimano… anyone had the same issue ?

Good to know thank you

@ribblevalleycyclist

7 ай бұрын

You’re welcome 👍

Im using these, they work very well. I do wish they did a 180mm disk in centre lock so i could use Peak Torque adapters and get slightly more heat dissipation when loaded. Much prefer them to Shimano which I find don't last very well and really don't like salty roads.

@kuchenzwiebel7147

9 ай бұрын

Can't you just use other 180mm mtb hope rotors or ones form another brand?

@hectorkidds9840

9 ай бұрын

@@kuchenzwiebel7147 I blooming well can, I'd either not spotted that hope do a 180mm center lock, or it's relatively new. That's quite exciting, I didn't want to change brands because the hope ones are pretty!

Just bought a pair of (road) wheels for a gravel bike (soon to be all purpose bike) - the Hope Floating rotors came on these wheels, and upon first setting up the intermediate bolts hit the brake pads (on a TRP Spyre post mount brake). The rotors are the same size as the TRP ones I already have on the existing set of wheels - anyone else experienced this? From what I see these Hope rotors are rather pricey in comparison to the TRPs, so surely there's something not quite right in terms of setup, rather than just being a design flaw....?

@ribblevalleycyclist

5 ай бұрын

I've heard some people mention this. I seem to recall Hope even mention it on their website.

i was searching for rx4+ caliper review so maybe that could be an idea for another vid

Hello and thks for your interesting video.....allow me please a few questions-Do these Hope rotors "pair" with Magura M7 brake system ?? In your video the Hope rotor you show has an even rim (my preference) Most Hope rotors models I see for sale do not have that even smooth rim but, "jagged".......I am looking for an alternative for my Magura M7 rotors as I have done almost everything to solve the noise under braking and I am considering Hope rotors in case they pair with Magura M7 system.

@ribblevalleycyclist

Жыл бұрын

Hi, There is no reason why not. However, the Magura MT7 is a MTB system, and the Hope Road 6 Bolt Rotor or Road CL is intended for road use. Thats not to say you couldn’t use the 6-bolt road variant, but you would be limited to 160mm rotors. If your intended use is MTB, then you may want to explore the Hope Standard & Floating rotors (link below), as these still give you the floating technology, but are offered in 140mm to 225mm. However, you will lose the machined rounded edge that this rotor offers, as you say, Hope MTB rotors are “Jagged”. Also, it’s worth noting that most noise during braking is caused by the pads, rather than the disc. Noise caused through the disc is usually caused by contamination. The MTB world tends to opt for a sintered brake pad, these are notoriously noisy, especially in the wet. Opting for a resin pad can resolve this problem. I hope this helps. Jon Link: www.hopetech.com/products/brakes/discs-accessories/standard-and-floating-rotors/

@joaocarlosindianhead1525

Жыл бұрын

@@ribblevalleycyclist ....thanks a lot for your helpful answer.....keep on.

@joaocarlosindianhead1525

Жыл бұрын

.....do you by any chance know of a magnet for speed sensor, to be fitted on the rotor mentioned in link??

@ribblevalleycyclist

Жыл бұрын

I know that Shimano offer a disc mounted speed sensor, it’s used by some TT riders, because they can’t access the hub on a solid wheel to mount the normal type. However, I don’t know if you can fix one to any other make of rotor. It may be worth contacting Hope and asking them.

@joaocarlosindianhead1525

Жыл бұрын

@@ribblevalleycyclist 🙏🚴‍♂🙏

I would like to try them on my TRP Spyke Disc Brakes on my Soma Saga Disc Touring Bike

This was an excellent Video!! I stumbled across Hope rotors looking for something with a *pop of color. I didn’t know anything about the brand so I did some research. About to make that purchase now! Thanks 🙏🏾 #RobbArmstrong

@ribblevalleycyclist

Жыл бұрын

Thanks @RobbArmstrong, glad you enjoyed it. You should check out their road brake callipers, amazing performance. All hand made in the UK.

@robbarmstrong8702

Жыл бұрын

@@ribblevalleycyclist NICE!!!! I'll check them out. I'm building up a Bianchi xR3 and gonna put those on it! I may have to mention them in my next Episode of "Cycle Talk", thanks again! #RobbArmstrong

Can you use resin pads on these rotors…..?

@ribblevalleycyclist

3 ай бұрын

Yep, and I am currently. 👍

What about noise?

@ribblevalleycyclist

Жыл бұрын

Hi, In the dry, I get no noise at all. In the wet, I do get a little when first braking. However, I put this down to the fact that I’m running ceramic sintered brake pads.

if these are like the Hayes floating rotors they will start to rattle as they wear.

@ribblevalleycyclist

3 ай бұрын

Just checked my Strava, 1,935 miles, and two years, no rattle yet!

Love my hopes because they are blue - but they are bloody heavy compared to Shimano - still have them on my bike tho 🤪

@ribblevalleycyclist

Жыл бұрын

Love them too, James. They look super cool, and they hardly ever rub. If I go down a big descent, they make a clicking noise at the bottom where they shrink back into shape. I'm running the 6 bolt version, which on their own are lighter (109g) than the centre lock Shimano's (115g) they replaced. Trouble is, when you include the 6 bolt to centre lock adaptor, it comes in heavier (140g). The best discs though 👍

@ribblevalleycyclist

11 ай бұрын

Hi @@DanImal-eo5mo, I would always recommend speaking to your wheel/hub manufacturer in the first instance. In this install, I used the HUNT adaptors/shims that were supplied with the wheels. However, in the past, I've also used adaptors from Superstar Components, but I'm not sure if they're holding stock - www.superstarcomponents.com/en/centrelock-adaptor.htm It's also worth noting that Hope make a centrelock version of this rotor too. Hope you get it sorted. Thanks, Jon

Maybe they are good, or better, but more expensive in the UK, then in EU. In Germany they cost 54 Euro, UK 60-80 Sterlings for ONE! For these I by the PAIR layered Campagnolo disc rotors made by Magura (1.85mm thick). Don't suport the rip off!

@ribblevalleycyclist

11 ай бұрын

You make some good point @MrSzwarz, but I'm not sure the Hope product is a 'Rip-off'. Cost - In the real world, the difference is £10 per rotor. The Hope product is hand made in the UK, therefore manufacturing costs are at a premium. Shipping from the UK into the EU also increases the retail cost. Not a lot Hope can do about that, so not sure they're ripping people off. Thickness - Not always better. Hope manufactures to 1.80mm thick, so that the rotor can also be used with earlier calipers that offer less disc clearance. I do however agree with you, both the Magura and Campagnolo/Magura products are very good. Whether on not one is better than the other, who actually knows?

I'm told these Hope rotors are not perfect and have a common rattling problem.

@ribblevalleycyclist

Жыл бұрын

News to me. Mine have done 2000 odd miles with no issue. Also know many people that run them without issue. Where have heard this Charles?

@charlesmansplaining

Жыл бұрын

@@ribblevalleycyclist MapdecCycleWorks channel on KZread. I asked him the question and that was his reply.

@ribblevalleycyclist

Жыл бұрын

@@charlesmansplaining Looked through his vids, but couldn’t find anything about Hope rotors. I’m sure he said it though.

@charlesmansplaining

Жыл бұрын

@@ribblevalleycyclist His vids were not about Hope rotors. In the comments section of one of his videos I asked him about the Hope rotors and he replied. I figured in his line of work he would have some opinion based on his exposure. Hope is not so common here in the US. I have used Hope Pro4 hubs in the past for mountain biking and really like the hubs. Based on what you claim about the rotors in your video I would like to try them but they are not so easy to get where I live.

@buckroger6456

Жыл бұрын

@@charlesmansplaining you shouldn't have any issues with ordering direct from Hope if one of your local shops can't get them in.

The RX4 calipers are the best on the market…

@ribblevalleycyclist

Жыл бұрын

Agreed, they’re an amazing engineering company 👍