Just wanted to share some thought on my traxxas trx4.
Жүктеу.....
Пікірлер: 34
@clitcommander69464 жыл бұрын
I just gotta say, your body looks way healthier than mine after one month, and I’ve had mine for about a week🤣
@thatsmyrc6 жыл бұрын
Great review and dont feel bad we all learn from our mistakes. Just take your time dont rush through anything on rc's it will make the difference in the detail ;-) great looking rig!
@rog82853 жыл бұрын
Very nice. I make mistakes alot too. Part of living bro.
@RCPropaganda
3 жыл бұрын
🍻🍻
@arsalrc6 жыл бұрын
Very nice truck, liked and subed
@JoeOvercoat6 жыл бұрын
great combination of bits you got there. maybe mount some spot lights where those vents were going to go for night trailing.
@ka41723 жыл бұрын
I change the bumpers from my Defender .i put on a front prerunner Axial Honcho bumper and the rear bumper from the Axial Dingo .way more better crawling angle,protection (rear bodyends) and fit plug and play.
@RCPropaganda
3 жыл бұрын
👍
@messenger22676 жыл бұрын
I hear ya man, i be doing stuff like that too lol. =D
@zedorda13376 жыл бұрын
Barbie actually makes alot of scale bits you might like.
@MrNiteriders16 жыл бұрын
Nice review and info. I like it👍👍
@MikeRCWorld3 жыл бұрын
It's a nice testing body :-) hope next will be done perfect as you learn from mistakes :)
@hillbillygaragecs29212 жыл бұрын
Looks good
@RCPropaganda
2 жыл бұрын
Thanks. That was so long ago too. That was my first crawler and what started the life of this channel.
@kevensun6 жыл бұрын
If your ESC craps the bed. Hobbywing Quicrun 1080 brushed ESC paired with Holmes Hobbies Trailmaster Sport 550 21T. On 3S, low gear is super smooth and accurate, hi gear kicks ass. I blew through two stock escs and gave up on em.
@RCPropaganda
6 жыл бұрын
I have heard that it craps out 3s a few times. I will just run the 2s for now. I do not want to to spend money on this truck right now. I been doing to much as of late.
@MrAkatango255 жыл бұрын
I like it. I am kinda doing the same just painting my own body. I want a flat green with clear windows and EZON light kit.
@RCJOE6 жыл бұрын
Nice review 👍
@rcaddict420crawling86 жыл бұрын
Hey I just got my trx4 after a year with a everest10 I’m used to breaking fixing breaking it again what parts should I have on hand so I have minimal down time and what do you think of putting in wheel weights
@RCPropaganda
6 жыл бұрын
I been using mine hard for over a month and no breaks on anything major. I had a servo for the locking diff go out thats it. I do not think it needs the wheel weights. Adding the weight does not help all the much.
@rcaddict420crawling8
6 жыл бұрын
Grow Your RC awesome thanks a lot very helpful and informative
@rcaddict420crawling8
6 жыл бұрын
Grow Your RC well I burnt the steering Servo doing donuts on ice and the motor burnt after 10 minutes going easy in the cow pasture mud
@emilhagglund33185 жыл бұрын
how have you cover yours hole on the tires??
@crawlhardrc78526 жыл бұрын
Get you some more diamond plate and cut it the shape of your vents to cover the holes. That would look cool
@RCPropaganda
6 жыл бұрын
I bought some from yeah racing, but no longer am going to run that body. Might hold on to them, might give them away when the subscriber count goes up.
@clitcommander69464 жыл бұрын
I love your accessories bro that’s the next step for me🤘
@RCPropaganda
4 жыл бұрын
This is a really old video. No longer even run this body or truck.
@karenaylward68176 жыл бұрын
glue bug screen on inside of front fender holes it will look good same with snorkel hole
@LaFata76 жыл бұрын
Wow an other good video.
@francis80825 жыл бұрын
Where did you get the on/off switch ?
@RCPropaganda
5 жыл бұрын
Its called a ez start. Just search trx4 easy start. Amazon and ebay have them.
@francis8082
5 жыл бұрын
Thanku brotha
@MoBay876rc6 жыл бұрын
Nice review and truck I crawl as well check out my channel
Пікірлер: 34
I just gotta say, your body looks way healthier than mine after one month, and I’ve had mine for about a week🤣
Great review and dont feel bad we all learn from our mistakes. Just take your time dont rush through anything on rc's it will make the difference in the detail ;-) great looking rig!
Very nice. I make mistakes alot too. Part of living bro.
@RCPropaganda
3 жыл бұрын
🍻🍻
Very nice truck, liked and subed
great combination of bits you got there. maybe mount some spot lights where those vents were going to go for night trailing.
I change the bumpers from my Defender .i put on a front prerunner Axial Honcho bumper and the rear bumper from the Axial Dingo .way more better crawling angle,protection (rear bodyends) and fit plug and play.
@RCPropaganda
3 жыл бұрын
👍
I hear ya man, i be doing stuff like that too lol. =D
Barbie actually makes alot of scale bits you might like.
Nice review and info. I like it👍👍
It's a nice testing body :-) hope next will be done perfect as you learn from mistakes :)
Looks good
@RCPropaganda
2 жыл бұрын
Thanks. That was so long ago too. That was my first crawler and what started the life of this channel.
If your ESC craps the bed. Hobbywing Quicrun 1080 brushed ESC paired with Holmes Hobbies Trailmaster Sport 550 21T. On 3S, low gear is super smooth and accurate, hi gear kicks ass. I blew through two stock escs and gave up on em.
@RCPropaganda
6 жыл бұрын
I have heard that it craps out 3s a few times. I will just run the 2s for now. I do not want to to spend money on this truck right now. I been doing to much as of late.
I like it. I am kinda doing the same just painting my own body. I want a flat green with clear windows and EZON light kit.
Nice review 👍
Hey I just got my trx4 after a year with a everest10 I’m used to breaking fixing breaking it again what parts should I have on hand so I have minimal down time and what do you think of putting in wheel weights
@RCPropaganda
6 жыл бұрын
I been using mine hard for over a month and no breaks on anything major. I had a servo for the locking diff go out thats it. I do not think it needs the wheel weights. Adding the weight does not help all the much.
@rcaddict420crawling8
6 жыл бұрын
Grow Your RC awesome thanks a lot very helpful and informative
@rcaddict420crawling8
6 жыл бұрын
Grow Your RC well I burnt the steering Servo doing donuts on ice and the motor burnt after 10 minutes going easy in the cow pasture mud
how have you cover yours hole on the tires??
Get you some more diamond plate and cut it the shape of your vents to cover the holes. That would look cool
@RCPropaganda
6 жыл бұрын
I bought some from yeah racing, but no longer am going to run that body. Might hold on to them, might give them away when the subscriber count goes up.
I love your accessories bro that’s the next step for me🤘
@RCPropaganda
4 жыл бұрын
This is a really old video. No longer even run this body or truck.
glue bug screen on inside of front fender holes it will look good same with snorkel hole
Wow an other good video.
Where did you get the on/off switch ?
@RCPropaganda
5 жыл бұрын
Its called a ez start. Just search trx4 easy start. Amazon and ebay have them.
@francis8082
5 жыл бұрын
Thanku brotha
Nice review and truck I crawl as well check out my channel