Highly insparational vids love it !! I just ordered a Trx 4 I'm so stoked ! Can't wait to see your next video as always 😁😁. Cheer's Bud !! Your the best !!!

@bigpoppapaulsradiocontroll2724

5 жыл бұрын

Jjii198

Thanks for all of your upgrade and experience videos on these TRX4 trucks. They helped lead me to buying the Bronco version and it has been a lot of fun. You inspired me today with your Best 5 Free Upgrades video to do a little more tweaking. The one thing I totally overlooked that was staring me in the face was the shock setup. I didn't have any appropriate springs in the parts bin but just dialing them almost all the way soft helped a lot. And you're so right, the oil in them is way too heavy. I also remembered that I had a bag of lead fishing shot weights. I don't care too much about the stock wheels as they'll get swapped out pretty soon for some beadlocks so I set about hot gluing some of that shot right inside the rims, being careful about clearing the portal cases. Those two easy mods took me maybe 30 minutes, didn't cost me a dime and made a very noticeable improvement, which I got to test out on my backyard course I just finished the first segment of today! What an awesome Saturday :) So here's a tip I can share with you on the Bronco for lighting. As you know, Traxxas doesn't have a light kit for these yet. However, Yeah racing makes some inexpensive strings that actually put out some useable light and they fit well where there are already snap-ins, like the tail and marker lights. For the headlights one just needs to do some careful drilling and use the supplied snap rings in the Yeah kit. I did headlights, tail lights and by drilling out the dummy plugs for the Traxxas rock light kit I was able to do some very useable rock lights. Two strings will run about $16. I added in a pair of retro looking cree smd led bumper lights that were about $20 bucks and they put out what looks to be close to 150 lumen and the entire mess is plenty bright for some night crawling. Wired all that up through an old servo board I converted to a light controller [google it, super easy to do] and now I have that on a spare channel. One word of caution. One needs to be totally comfortable with soldering and redoing the harnesses. They can be made to fit as-is but it's very messy. I hate messy wiring so I took the time to fit all of that clean and proper. The Yeah lights come with resistors pre-installed too and are safe up to 3S as-is. I found them very easy to work with. The spare channel thing leads me to what I did on the radio. The Traxxas radio is pretty decent but I just had to have it running on my Spektrum so in went an srs6k receiver. That's just me. Nothing wrong with the Traxxas radio. The entire locking diff thing was annoying me as it took up two channels and seemed gimmicky. All diffs locked or unlocked is good enough for me. I ended up relocating the servo for the rear diff so I could have room to reverse the horn and then y-cabled front and rear diffs together so I get full lock/unlock on one channel. After the fact I found someone makes a Y cable with electronic reversing for one servo, apparently an aircraft thing and about $8. So for anyone considering this hack you don't even need to relocate the rear servo. Sorry for the long comment. I just wanted to share seeing how you're talking about TRX4 mods. Thanks for the videos. They inspired me to do some stuff of my own.

@RCReviewChannel

6 жыл бұрын

Amazing, amazing insight. Thank you for the share as that's what it's all about.

@charlesswank6401

6 жыл бұрын

Anytime, man! I've got more hacks and mods in store for this beast and will be starting an Axial project in the coming months. Hopefully I can share some useful stuff along the way :) Oh, and I meant to back you up on the battery thing. I usually run a good 2K mah 2s up in the front tray. Noticeably better weight distribution and it's good for a solid 45m - 1h of play time for sure. Been doing that since day 1. For perspective, last weekend I ran a 5200 2s that was just over 1/2 charged. I walked a long one around the neighborhood with my dogs and the truck crawling everything in sight [We have plenty of steep dirt and rocks here] and got almost 3 miles on that. I popped in a fresh 2K mah, went the last mile home on that and then popped that in my Losi mini and messed around for another 30 or so minutes and didn't kill that, cells were still at 3.6v each. Certainly far better than the nimhs and nicads I started out on so long ago! A strong 2K mah 2s is plenty for most sessions on these TRX4s for sure! Keep up the good work. You break it down well and thanks for investing the time and money in it too. I mean, you have a few trucks there but then what is the right number of RCs to own? N+1 ;-) Take care.

I agree with you ! Better tires like Pitbull Rock Beast XOR, incredibly sticky, heavier Beadlocks wheels like Gmade affordable metal wheels SR03 Stronger Direction servo 277oz.inche (20Kg.cm), and to go with heavier torque, add an external BEC, 3 to 5 A (the internal BEC of 2A is not bad, but just limit...) The full Traxxas light kit: so great at night! So much fun to drive in the dark. Try it everybody Under chassis load (under frame!), this one is to come for me! I will definitively need it as I love too much the Defender body to change for a lighter one! Changing the body: yes if you want to change it into a competition crawler, but for scale crawling with scale obstacle imitating real life, no problem with the original Defender body. When we attack obstacle with more than 48 degrees climbing angle, it is fun but far from imitating a Defender in offroad situation!! LOL

@RCReviewChannel

6 жыл бұрын

Damn. Thank you, thank you for all the details!

Great video....and you were so gentle with it

@RCReviewChannel

6 жыл бұрын

Ha ha... TLC on the work bench. It tumbled 20 feet to the ground yesterday though. :)

I’m courious what the new Jeep Body from traxxas is going to be like made for the trx4? Haven’t seen it yet. But pretty much nailed the first 🖐🏼 I run a Savox 1230 servo with external bec. Nice video 👍🏼

I was just looking for a way to lighten that body this weekend and I ended up cutting off the spare mount, jerry can and hilift mounts off the back. Keeps the integrity of the frame and bumper AND it still looks great with the skeleton cage but really looks sleeker without the weight or extra length on there...happy.

@RCReviewChannel

4 жыл бұрын

Very good ideas for sure

The #1 thing I recomend on a TRX-4: Upgrade AND relocation of stearing servo! Then add a Castle Creations BEC. I put a heavy duty Trackstar Evo brushless digital servo. (588oz where the stock Traxxas is around 200oz) I bought a brass front bumper mount with a mount place for servo. I used an aluminum 25t servo horn. Had to adjust linkage a bit and then change direction of servo. NOW: I have full range of the front suspension. Before, the linkage would prevent the right side from going all the way up. The left side went higher than the right. The space was aprox 3/4 inch. Not anymore! Both sides are equal. My stearing is better as well. I have been running like this for about a year now issue free! I think my cost was about $150. That included a custom made machined aluminum box for my Castle BEC. This box is waterproof & runs about $20 from Leading Edge Machinery (LEM). Other than that replace as much plastic as you can with brass down low. I removed the spare tire and rack to get weight down. I have a TRX-4 that amaze people who don't like Traxxas "because they are not real scale crawlers"????

@RCReviewChannel

6 жыл бұрын

great advice.

@33fastcar

6 жыл бұрын

RCReview Don't use Integy aluminum drive shafts! Im learning that brand is starting to let me down...

I love my Trx-4. I have numerous upgrades. One thing i want to work on next is the body shift left and right when steering in the opposite direction. is this unique to the trx-4, or all chassis mounted servos? is there a way to stabilize this?

du machst super Videos !, schöne Grüße aus Österreich !

Loving that limousine 12.8" wheel base!!! ;)

@BUILTLIGHTWOUNDTIGHT

6 жыл бұрын

I totally agree with you, it's second to none!!!

Real steel beadlock wheels with stick on car wheel weights added to each wheel inside where the foam inserts go. Trim the foam to allow room for the weights. Doing this mod adds almost 3oz (85gr) to each wheel! Can't get weight any lower then adding it to the wheels themselves! This with some nice G8 compound tires and the truck can climb and go through almost anything.

@RCReviewChannel

6 жыл бұрын

very, very good input. What's a good steel beadlock? They all seem so expensive.

@t.t.6398

6 жыл бұрын

RCReview here ya go! They say they're alloy wheels but they're heavy! Feel like steel to me. 108gr EACH! Look at this on eBay www.ebay.com/itm/222901577211 I have 2 sets of these with the Proline BF Goodrich G8 compound tires and like I said I added additional lead stick on automotive wheel weights to them inside where the foam would contact the wheel. I trimmed the foam, added the weights and now each wheel and tire weigh over 200gr each. Hope this helps you and all your viewers! 👍

Awesome video B.T.W.!!!

Can you vent the tyres by drilling a hole in the rim instead of cutting the tyres??

Would you recomend the Savox SW-1210SG or SA-1283SG servo for the TRX4 Sport?

Is it can install the led bar directly to the existing esc or need to change the esc?

125oz is great for running Scale Trail lines ;)

Any recommendations for towing a trailer? Already decided my new Bronco kit will be towing something special around with me on the trail. I figure altogether it should weigh about 4lbs with the trailer included.

@RCReviewChannel

4 жыл бұрын

Shouldn't be a problem with the Bronco since it has a big motor and 2-speed transmission. Yeah Racing is good value and RC4wd is sturdy available here snp.link/d83c28ef

Are you doing this in a garage. I can see a garage door open n the background.

What about shock springs? I've added some metal parts to my Defender, and the stock springs don't seem like they are up to the task. I converted my TRX4 Sport to a Defender, because I really like the scale look of the truck. Do you have a recommendation for some stiffer springs?

@RCReviewChannel

4 жыл бұрын

Softer is better for higher crawling performance. Stiffer is good if you're doing a lot of high speed.

can you share links of upgrade ?

is it ok to run 5000 mah 7.4 2s 30c for the trx4

How about a list?.

I FOUND SOME WHEELS THAT INFLATE AND DEFLATE DO YOU RECOMEND IT

@sprather84

4 жыл бұрын

No they are horrible

First and foremost, Tires make the Truck!!! ;)

Can you list the parts numbers for your servo and horn upgrade?

@RCReviewChannel

6 жыл бұрын

servo www.amainhobbies.com/savox-sw1210sg-tall-waterproof-aluminum-case-digital-steel-gear-servo-sav-sw-1210sg/p262193

@RCReviewChannel

6 жыл бұрын

horn has to be trx4 compatible for clearance www.amainhobbies.com/samix-traxxas-trx4-servo-horn-grey-25t-samtrx4-6022f-gm/p722957

@SantaPlaysPickleball

6 жыл бұрын

Do you run a BEC?

@RCReviewChannel

6 жыл бұрын

I don't run a BEC. I use a 250 oz Savox servo and it is amazingly capable for this vehicle.

So would you rather buy the tactical over the land rover ? =) Nice video ! =)

@RCReviewChannel

6 жыл бұрын

Tactical is a better performer for sure. But the stock color is soooo ugly. So get the clear one and paint yourself.

@SwedenRCAdventure

6 жыл бұрын

I''ve ordered the Bronco model =) Still waiting for it tho... Hobby shop first said 12th but now they have changed it to the 16th. My FIRST crawler !! :D

@charlesswank6401

6 жыл бұрын

You won't be disappointed. The only problem I have with the Bronco is it's such a looker! I was almost hesitant to banging mine up but it's all good and scuffed up now ;-) Go check out his video on 5 best free mods for the Bronco. Good stuff to improve it right out of the box although it does pretty good as is. At the least, dial the shocks way down and use a small battery [2000mah 2s] in the front tray and you'll be good to go.

I'm thinking about upgrading my servo, do I need an external bec?

@RCReviewChannel

6 жыл бұрын

No, specially if the servo is under 300oz of torque BEC gives it a little 20% kick so good for optimal performance but not necessary.

@chrisgrant8719

6 жыл бұрын

RCReview ok thank you

@cl-audio322

5 жыл бұрын

@@RCReviewChannel Can I throw that 20KG budget servo from Amazon you recommend in the TRX4 sport without a BEC?

Hi body! Your channel is one of the best ones that I follow. I would like to ask you please to increse the volum from the speaker. In the video its too low. Tks and keep going

@RCReviewChannel

5 жыл бұрын

Thanks buddy. Fixed on the latest videos. Please check it out.

Did you use a BEC with that savox ?

@joeschmo2393

6 жыл бұрын

Francis Cebedo I wonder what happened with my trx-4 then, I put in a savox sw-1211sg with 250 oz-in torque and it fried my stock esc!

@joeschmo2393

6 жыл бұрын

Francis Cebedo I did, they are sending me a new one Thanks man..great videos btw!

@chuckbergman4855

5 жыл бұрын

I installed the Castle creations bec to be on the safe side. That being said it actually makes a big difference in all around performance installing the bec.

Put stock tires on aluminium Bead Locks.

@RCReviewChannel

6 жыл бұрын

With softer, dual-stage foam, these tires work well.

Just get a hobby wing ecu screw link

I mean for that kind of money 450.00 you shouldn't have to buy a module for the radio,i still like my Traxxas rc'sbut,for crawling and trailing it'd red cat for me.

Upgrade that p.o.s slipper clutch ASAP. Or keep the TRX4 out of mud and water.

@RCReviewChannel

4 жыл бұрын

good advice on the clutch

Only upgrade and add brass weights if you replace the body with a lighter one. If you add weight to the axle portals with the original body your tires will collapse and will not hold the weight. Your kit will not withstand any lateral angles causing rollover.

@RCReviewChannel

6 жыл бұрын

good advice!!!

@lasliyanage205

5 жыл бұрын

Not exactly true. If you are running a dual stage foam then you are fine with the weight and defender body

If your gonna change the body get a body that atleast fits... That back bumper looks very ugly with the 4runner

gıve lınk please

The esc. Sucks..!! 6 times of use ..its already fried..!!

@shaunsanford2253

5 жыл бұрын

Order a hobbywing 1080 esc. $42.00. Best money youll ever spend. I agree the stock esc is junk. 8 easy runs and i smoked mine.

You wanna know the absolute best ever UP GRADE now ,and in the future?,ok i'll tell you,buy the new Red Cat Gen8 .

@RCReviewChannel

5 жыл бұрын

Ours is coming. At $300, seems like a stone cold winner! The servo on it though sucks. Strong enough at 150 oz but slower than molasses.

@logansportpilotrp8174

5 жыл бұрын

@@RCReviewChannel yeah i think it is a winner also,i just love my gen7 pro,i put aluminum 2"x1/8th from front wheel well to rear on both side,it actually makes the truck go over , or should i say slide over rocks way more easily now,also the truck when you push in on both sides now there is no give at all super rigid now-this is due to the aluminum ,so yeah i love my gen 7 pro.

Use a better mic