Cant wait to see that boom stick fire! Love the AK style!

Great project. Ive been thinking of doing something similar. Originally I just wanted to do the simple slamfire... But it keeps morphing into all these ideas and additions to the design lol.

Can't wait to see the finished art work awesome....

look's good so far, hope to see more of this project soon! :-)

That's really nice looking. Great job. Making firearms is a fun process and a stress reliever for me haha.

Looking good !

wow you got props from cryptic cricket not bad no I think its common along real nice Teddy brosevelt thanks 4 the video

cool build

really cool slamfire bro! I was thinking about round tube in square tube with bolt extactor, ejector obvious spring loaded with charging handle! I think it would b pretty cool almost a shotgun machine gun without magwell ,feedramp, ! it could b done as semi what r your thoughts????

There are many smart people like you who, with a little effort and some parts from the hardware store , build a pistol or a rifle themselves and make it work. The real problem is to get some ammunition. It would be great if creative people like you thought about how you can actually make some kind of working ammunition yourself. In the USA you can get ammunition on every corner, but unfortunately not so easily in most of the rest of the world. Best regards from Germany :)

Cool man

"Should be perfectly safe"...

@giggergigger1

4 жыл бұрын

said every 3 fingered gun guy!! seriously hope hes checked this out becaue a 2 3/4 12ga shell can produce up to 11500 psi pressure, and thats no joke

@vonsvinpals

3 жыл бұрын

@@giggergigger1 yes but not from that 12g size pipe... need to put that in a very small pipe then, and as long this is good material its NO problem.

@BigBosley

3 жыл бұрын

Sections of SMT or DOM 4140 are what, $10? Why take the risk with cast water pipe known to have flaws/cracks?

Did you finish it? I subbed, hope to see more!

@Fairfax_kit

7 жыл бұрын

Yes I did! Here's a link to the video of me finally shooting it. Thanks for watching. kzread.info/dash/bejne/oYx5q7eaXdS6pqw.html

Good

It wasn't out of round. There is a weld bead inside both pipes standard from home depot.

@Fairfax_kit

4 жыл бұрын

Yes, I know there's a weld bead. It's soft, cheap steal, and can by extension, get smashed in handling. It was out of round.

Would you please help me if possible. What would be the measurements (pipe external diameter, wall thickness, and hole diameter) of a 4130 pipe to make a 12 gauge shotgun? Thank you for your attention.

@neilblackman2965

5 жыл бұрын

KAMERADEN VON if you search 12g breech dimensions you'll get the exact sizes

Top de mais

Belíssimo trabalho

@Fairfax_kit

5 жыл бұрын

obrigado!

Are you kidding? Out of round? No. The black pipe from Depot is rolled, not seemless. There is a pain in the ass weld running the length of the inside of the 1 inch pipe. There is a 1" grinding stone as well as 1" flap disk that work well along with a few hours of rasp work before you get that weld out of there. Then you still have to grind the 3/4" black pipe until its quite silver before it will slide inside the 1" piece. Ive not heard of a black pipe being "out of round". Its possible I guess but not likely.

how much did this cost to make?

Why do you make your own firearms living in America, a firearm heaven. You have everything we could only dream of. I can understand doing it down here in nannyshitsville because of our strict firearm ownership laws. 🖐 🇦🇺

@Fairfax_kit

4 жыл бұрын

Really just because it's fun to build them. I don't really have a reason other than that.

@FrugalPCOG

4 жыл бұрын

@@Fairfax_kit also, there are a lot of good people that have gotten hung out to dry by law enforcement and the courts over the years. Felonies do not allow purchasing firearms anywhere. Who gets screwed.. the family's of the unfortunate. So, we make our own. Off the books. Nobody is the wiser

You did a good job on the gun but the music track really spoiled your video

USD120 can buy me a factory-made rifle... brand new and safe.

Que medida es el tubo mas grande

@Fairfax_kit

4 жыл бұрын

Una Pulgada

Show

what's up with the too loud back ground music ? distracting,

I went ahead and "borrowed" your idea for a slam fire and added some ideas of my own. If you want, check out the videos of my builds on my channel. Subbed ya!

sorry, any time i hear "totally safe" i get a little further away. even if i know .002 isn't going to compromise a barrel.

@Fairfax_kit

7 жыл бұрын

A few hundred shot shells have gone through this gun since I finished it, with no change in barrel dimensions. Because I had some on hand, I swapped out the pipe barrel for a 4130 Chromoly barrel, which has an annealed strength of around 60,000 psi. The loads I put through the gun rarely exceed 12,000 psi being that It's mostly birdshot that I shoot. Totally safe. Thanks for watching.

@sternstones4871

7 жыл бұрын

i could make most of those parts on the cnc machine at work, but i cant weld. thanks for videos

@Fairfax_kit

7 жыл бұрын

There are some ways to get around welding. If you have the means, drill, tap, and bolt the components together. I did that on another shotgun that I haven't uploaded yet, and it worked well enough.

@sternstones4871

7 жыл бұрын

I have an idea for a M3A1 grease gun inspired gun, using parts i already have. I would like your input on it.

@Fairfax_kit

7 жыл бұрын

I'd have to see it.

just finish the ak instead bro

@Fairfax_kit

7 жыл бұрын

What AK?

wow you got props from cryptic cricket not bad no I think its common along real nice Teddy brosevelt thanks 4 the video

Good