Bike looks and sounds great. I can only imagine how it sounds in person. I know you love it I can hear the excitement in your voice.

@timfinning

2 жыл бұрын

Thanks mate, yes I was a little bit excited, when I played it back I noticed how much I was lost for words lol it's a night and day difference. I can't wait for better riding weather here. 👍

You got that organised rather quickly! That power figure is very healthy and pretty much what I'd expect from your setup. The El Diablo is still one of the best exhausts I've heard on a Harley. Happy riding!

@timfinning

2 жыл бұрын

Thanks Kirk, this has been in the making for a while I just didn't really talk about it until recently. I've had the pipe for about 6 weeks and organised the cam around 5 weeks ago just had to wait to get in lol. Mate it's night and day difference and loud like you said, hopefully won't attract too much attention from the boys in blue lol but so far I'm stoked 👍

Looking and sounding sharp Tim 👍🏼

@timfinning

2 жыл бұрын

Thanks mate 🤙

Awesome Tim, sounds great

@timfinning

2 жыл бұрын

Thanks Mark 👍

Sounds tough brother!! Well done!!

@timfinning

Жыл бұрын

Thanks mate 👍

Sweet, love the rumble. Ride Safe 👍

@timfinning

Жыл бұрын

Thanks mate you too 👍

Sounds amazing Tim. Hope you don't run foul of the police.

Slightly jealous bud, been looking at the S&S cam set up and Dyno tune. Sounds great man

@timfinning

2 жыл бұрын

Thanks mate absolutely worth it you wouldn't be disappointed

Sounds very good!

@timfinning

2 жыл бұрын

Thanks Jason 👍

Congrats mate!!, it’s like riding a new bike! I’ve just got my new lowrider S117 and just got the S&S grand nationals (race only without cat) installed with a proper map, and that all ready feels really nice! But I definitely got that 475 cam on my list ! Did you only do the cam ? Or also oil pump and lifters etc ? Regards from Spain 🇪🇸!

@timfinning

2 жыл бұрын

Thanks mate, definitely feeling like a new bike. Fitted the cam, adjustable push rods and billet lifter guide's that's it. This upgrade is amazing for how much more power it provides you won't be disappointed. Stay safe 👍

@On2WheelswithDennis

2 жыл бұрын

@@timfinning thanks 👍👍, enjoy and ride safe 🍀🤘

Yeah I did notice how instantly it picked up when you tweaked the throttle, very impressive tune. I was hoping you'd take us for a ride. 😁

@timfinning

2 жыл бұрын

Mate this bike is pretty wild, the camera doesn't pick up the seat of your pants acceleration . I don't know if you could pick it up but I was getting a bit enthusiastic and was lost for words lol. Stay safe my friend 👍

@BikesILike

2 жыл бұрын

@@timfinning No I picked it up! I was hoping to get a feel by the way you reacted while accelerating and I got exactly what I was hoping for. Not only have you got the bike looking awesome but it sounds like you've tailored it to be perfect for the way you like to ride, which I might add is the way I like to ride. Riding the wave of effortless torque, nicely done. I'm betting this bike is now a keeper.

Sounds cool!

@timfinning

2 жыл бұрын

Thanks Cherry

The 475 really sounds good

@timfinning

Жыл бұрын

Thanks mate appreciate it 👍

Greetings from the Pine Barrens of New Jersey USA TIM a few months ago I told you I had a 2022 Street Bob 114 with a Stage 2 torque cam. You asked about my fuel mileage with this setup. I have been getting around 45_48 MPG. Sorry I took so long to get back to you but I lost track of your channel.

@timfinning

2 жыл бұрын

All good Alexander, that's some good mileage still. Still waiting to see what mine is getting but those numbers I'd be happy with 👍 thanks for getting back to me. stay safe.

I'm after radials or short shots, and can't get my head around the 2 into 1 look of the exhausts, what are you he pros

9 months old...but I felt the same way about he HD sissy bar pad. I added the Saddlemen sissy bar pad and the wife loves it. Much taller and a lot more substantial than the joke of a HD pad.

@timfinning

Жыл бұрын

Yeah definitely a poor quality product but I wanted to keep it small and minimalistic and the other pads for me were too big. Thanks for watching mate appreciate it 👍

Sounds great man. Looking at the s&s 475 as a possible candidate next summer for cam and a 2 into 1. How do you like that SDC seat!? I’ve had my eye on that one over the standard saddlemen seat for the higher back rest and slightly better passenger comfort, but not many people are running it or posting about it.

@timfinning

Жыл бұрын

The 475 is a great cam, you wouldn't be disappointed. I love the SDC seat probably one of the best mods I've done on the bike. Starting to see more of them being used now especially on the baggers. I highly recommend it. Stay safe 👍

@TonyTheTruckGuy

Жыл бұрын

@@timfinning Awesome, thanks for the reply! Enjoy the setup and stay safe as well!

Tim are those fork covers on your bike? …if they are how did you fit the fairing on the fork covers??

@timfinning

Жыл бұрын

Hello Sean, it's just gloss wrap I got off eBay, so doesn't effect the fairing clamps at all.

From the giggles im guessing you love it! Sounds wicked. My buddy has a similar set up in his street glide and it rips . my drag race v video is against his. Randytbird

@timfinning

2 жыл бұрын

Yes I was getting a bit excited lol It doesn't show up in the video how hard it accelerates. Definitely worth it 👍

@randytbird6548

2 жыл бұрын

@@timfinning i bet it does

I’m considering a Street Bob because they’re always for sale. They always seem to have around 1,500 miles on them. I wonder why that is? Why do people sell them soo quickly. I’ve heard they’re kinda clunky. I’m wondering if the Lowrider would be a better option?

@timfinning

Жыл бұрын

Hi Herschel, I love my Bob I've put 12500kms on it. They do take a bit of getting used to, changing gears is a bit weird as you lift your foot to change but once you get that sorted it's an awesome bike to ride, handles goes and stops really well. The low rider probably has the advantage of upside down forks twin discs and bigger tank but other than that I prefer the Bob. 👍 Stay safe

@herschelsquirts2338

Жыл бұрын

@@timfinning I appreciate the info brother, thanks for the response.

What tuner did you use after the cam?

@timfinning

Ай бұрын

Depending on where you live, Australia uses a tuner called Maximus (Key tune) then dyno tuned from there 👍

What fairing do you have on your bike. Love it.

@timfinning

Жыл бұрын

Thanks Bobby, it's the Harley quarter fairing it was designed for the softail standard but fits the Bob too really suits the bike stay safe 👍

@bobbymckee9169

Жыл бұрын

Thanks Tim.

Sounds unreal. What’s the part number ?? Is that the 6478B I’m looking for that exhaust but says 18-21. I want to make sure I’m ordering the proper exhaust. Mine is a 2023 but is the same as your bike.

@timfinning

Жыл бұрын

Hi Daniel, 18-21 should fit they're the same bike I was thinking the same when I bought mine too. The model seems correct but I would have to dig up my paperwork to be sure. If I find it I'll let you know .

@danielkingsley4858

Жыл бұрын

@@timfinning awesome thank you. I tried calling cobra myself and couldn’t get through. That would mean a lot 🤘🏻

@danielkingsley4858

Жыл бұрын

@@timfinning I got a hold of cobra. And says that number I gave goes up to 2022 so it is the same :). Can’t wait to get this. Now to find a tuner.

@chaosgamer13659

20 күн бұрын

⁠​⁠​⁠@@timfinning I have a 2023 street bob looking to get that exhaust but it says it won’t fit where do I get one?

@chaosgamer13659

20 күн бұрын

@@danielkingsley4858I wanna know for sure if it will fit the 2023 street job before I go order it offline that el Diablo 2-1 sounds wicked

With stage 2, I assume he can easily reach 200+ top speed. Btw how much horsepower do you get after stage 2?

@timfinning

Ай бұрын

I ended up with after a few tweeks 119hp and 188nm if torque at the wheel. Yes I did 200+ a few times as the top end speed restriction was turned off.

@yaojiang

Ай бұрын

@@timfinning That is an insane performance for a cruiser. To me, a cam upgrade is a must-do thing, but I'm a fan of low-rpm rumble sound, so I usually cruise around below 3000 rpm. According to others' feedback, ss475 lost some power at lower rpm like 2000-3000. That's my only concern. So I'm struggling between ss465 and ss475.

@timfinning

Ай бұрын

@@yaojiang I originally wanted the 465 but at the time none were available due to covid. The 475 still had heaps of bottom end grunt. From memory I had about 120 ft-lb straight off the bat

@yaojiang

Ай бұрын

@@timfinning I guess I need more digging. Looking forward to your new riding vids and ride safe!

How much for the tuner , cam and dyno tune? Would like to do this to my Heritage.

@timfinning

2 жыл бұрын

Hi mate, 2K for cam and Dyno. Basically rewrites your basic stage 1 tune, providing you have one? Absolutely worth it. It's night and day 👍

@yankinoz1956

2 жыл бұрын

@@timfinning sounds reasonable. I'm happy with my bike now but quicker throttle response would be great! Thanks for the info!!

@BrizBiker

Жыл бұрын

Bike sounds fantastic

@timfinning

Жыл бұрын

@@BrizBiker thanks mate, I love the cam chop at idle 🤙

And where are the dyno results you advertised? Just speaking the top figures doesn't show how the cam is performing, correct?

@timfinning

Жыл бұрын

instagram.com/p/CgQ-IbUhL6P/?igshid=Yzg5MTU1MDY=

@timfinning

Жыл бұрын

Check out this link to my Instagram and see for yourself, like I said torque curve start's high straight off the bat. Both torque and HP carry right through to nearly 6000rpm. The horse power goes nuts after 3250rpm

@tyroneshoelace4872

Жыл бұрын

@@timfinning What link?

Mines louder... Rhine heart racing bigshots...

Harley product, Made In China.