As a construction company owner I can honesty say that our TOOL-THEFT has gone down 95% since we started buying Harbor freight tools for our workers. The resale value on stolen harbor freight tools is NOT worth the jail time to our workers and the local pawn shops will not even consider buying Harbor freight tools. They only buy Dewalt and Milwaukee tools for pawn.

@miltonturner2977

Жыл бұрын

I used to run a manufacturing company that built electronic devices. All employees had tools. What I did to cut down the theft was serial number all tools with an etcher or stamps. Each person had their own number. If a tool broke they got a new one free, but if they lost one, they had to buy a new one...theft went to Zero. They also didn't loan their tools to others so that saved problems. On more expensive tools like drills/saws etc. they still had numbers but they checked them out and were responsible for them, again, NO problems. People that are 'forced' to be honest have no problem especially when they are personally responsible. If someone quits and takes the tools with them, the price is deducted from their last pay check...

@jonh284

Жыл бұрын

Where I work, everyone has their own locking toolbox with their own tools except for a few shop tools for common tasks, and they’re nice tools. We’ve never had a problem with anything going missing.

@JonnyH123

Жыл бұрын

😂🤣

@jaybee9269

Жыл бұрын

Human nature is sad sometimes…

@holezzz15

Жыл бұрын

​@@jonh284 i bet your company pays decent wages. the only people we have issues with are temp labor. all the hired on crew never steal anything

I got into Bauer cordless tools [BCT] about 3 years ago & have my small shop outfitted with about 7-9 tools. My first BCT was a 1/2" cordless drill/driver Model 1991C-B. I also had a DeWalt 1/2" cordless drill/driver Model DCD771 at the same time. I bought the Bauer with the intention of using the Bauer and not wearing out the Dewalt. Well the truth is this . . . after using both drill/drivers, side by side, for about 3 years I have come to the conclusion that there is not much noticeable difference between the power & battery life in these 2 drills. I have done the same work with either one and the only difference is teh color of the tool. 3 years later abd they are BOTH drilling & driving the same. Hope this helps someone.

@650gringo

4 ай бұрын

I am a machinist of 30 years. The most satisfying thing I ever did with my Harbor Freight Bauer cordless drill was throw it in the nearest dumpster.

@darkstar8827

3 ай бұрын

I bought my first Bauer tool 6 years ago, and it still running fine. I can't tell you how much I spent on Snap-on and Mac tools (Thousands!) but the bauer tools have been good and cost less.

@ex8280

3 ай бұрын

@@650gringo They've gotten a bit better, now that they've finally gone brushless.

@650gringo

3 ай бұрын

@@ex8280 The motor was fine. It was the chuck that was terrible. It would loosen while drilling and drop the drill bit out every time. Super frustrating.

@stinkycheese804

3 ай бұрын

Kind of a random comparison considering that Dewalt model is one of their low end, homeowner grade tools which only costs $99 for the entire kit with battery/charger/bag. It's not just about brand, you still get what you pay for.

Agreed on most everything in the video. I did hear Dave say electrical tape is ok to buy at HF . . . . . and having spent 30 years using tape, outdoors, in all weather on a daily basis . . . . it's definitely best to stick with 3M.

@gwb8445

3 ай бұрын

I've bought and used electrical tape from dollar store for years and it worked great!

@flyingsodwai1382

2 ай бұрын

Depends on if you need it to stretch or not. Sometimes in the field you need a stiff tape. Even Temflex doesn't have the structural rigidity of the super cheap vinyl tapes. I know... you have to store it in your armpit for it to work if its cold out. But who wants to waste super 33 on a wire pull.

@MegaZoomer

2 ай бұрын

3M, Loctite, Permatex. These brands simply set the bar. I have been impressed with Frog Tape (3M Scotch competitor) and Gorilla products. Now I'm becoming curious about Rigid tools. Used to be the go-to brand for plumbing tools but now seems to be a Home Depot house brand that makes a little of everything. Did Rigid change hands?

@williamwalters1184

19 күн бұрын

@@flyingsodwai1382 me ,if you ever have had wire to come loose using cheap tape , you appreciate good tape lol

@morscovium8881

18 күн бұрын

yeah cheap electrical tape is never good to get unless you enjoy causing yourself suffering

As a professional truck mechanic for 38 years, I can say that Harbor Freight has stepped up their game with some of the brands they now offer. Unlike DIY customers, I am fully aware that most of Harbor Freight tools were never meant for commercial use. If I buy a Pittsburgh brand wrench from their store, and it breaks the first time I use it at work, that's on me. However, within the last couple of years, Harbor Freight has been carrying Icon and Quinn brand hand tools that they advertise as direct competitors to SnapOn. I have purchased some of these hand tools and agree they are every bit as good as SnapOn. Their timing was perfect; both SnapOn and Mac tools used to visit my shop bi-weekly until the pandemic. Neither has returned even with the pandemic behind us. I still needed tools, my job didn't stop during the pandemic. Harbor Freight was available that entire time. They got my business and continue to serve me well. But I am going to tell you why I support our local Harbor Freight and am happy to give them my business- This is a relatively small community without a lot of opportunities. Since the store opened here, the management has made it a point to hire the "unemployable"; Ex-cons, recovering addicts, parolees, those wanting to get off welfare. This has worked out very well because the store has very little turnover. Its impressive when I go in the store and see a guy who I used to read about in the police blotter, now wearing a managers vest. If Harbor Freight can give these people a second chance, I can too.

@PatrickStewart316

Жыл бұрын

I manage a high volume auto repair shop with 10 bays. Matco and SnapOn stopped coming around during the pandemic and have not returned. Rarely if ever. My technicians (including master techs with 20-30 years experience) have started buying HF over the past 2 years and have been pleasantly surprised. Some duds to be sure but overall 👍👍

@todd8155

Жыл бұрын

@Randy R - Nice post! Thank you.

@marcharris4176

Жыл бұрын

Snap on is a complete ripoff. Their tools are not as good as they claim. And when they stop showing up your stuck with a p.o.s broken tool that you cant get fixed. I was a sucker for years buying snap on.

@nslouka90

Жыл бұрын

I agree, they are competitive now and they have to be considering what places like Home Depot and Walmart offer now for tools. Harbor freight has to do what they can to be cheap and useful but not complete junk that nobody would even bother with.

@malcolmnemis

Жыл бұрын

Q

I have to disagree on the jacks. In fact, Snap On attempted to sue for infringement on one of their jacks, which were cast at the same factory in China. Long story short they failed, you can buy a jack from the truck or the same one from HF for about 1/3 the price. I would also add if you get under a vehicle supported only by a jack you probably deserve whatever happens to you. Jacks don't kill people nearly as often as stupidity does.

@jacknickerson6985

Жыл бұрын

i was gonna bring up the same point. Bought my first HF floor jack in 2000 and it still works fine this day, I bought one of the yellow HF / Snap On style Jacks about 5 years ago and has had zero issues. I a professional mechanic and shop owner who probably has $80K in snap on, I am not afraid to pay the truck price, but when I can get the same tool somewhere else for 1/2-1/3 less I am gonna do it!

@terrywallace2576

Жыл бұрын

I would agree with you. I'm on my second-floor jack. (1st one was stolen) I've had it for about 6 years and use it on a regular basis along with my engine hoist.

@geopars9396

Жыл бұрын

Harbor freight actually owns some of the snap on brand. That's why they can sell the same stuff. And they can use the snap on name to there stores. I've seen it a lot. Compare to snap on. Snap on is a registered trade mark. So hf would have to pay for the use of the name, but hf owns like 40%ish of snap on

@jpm_nt_i9308

Жыл бұрын

I have a HF 3-ton floor jack that works GREAT !!!!!! It's 6 years old and going strong

@tonyg7553

Жыл бұрын

Snapon is not owned by Harbor Freight!

I worked in a machine shop and needed a 1/4" die grinder. I bought one at Harbor Freight for $9. I used it every day at work for 2 years. I was so impressed with it I upgraded to the $15 one. It lasted 3 days. I went back and bought another $9 one and used it for several more years.

@donaldkasper8346

Жыл бұрын

My record beats you, a plastic radial sprinkler from Walmart that lasted about 9 seconds before failing.

@rodneyjohnson4794

Жыл бұрын

should have bought 3 or 4 together.

@curiousgeorgevs.winniethepooh

Жыл бұрын

Some of their stuff is junk at harbor tools.They're paranoid when you return anything. It's a nightmare they even require an id for cheap junk lol

@james-jg8iu

Жыл бұрын

I never had a problem returning anything to Harbor freight

@KevinG3699

Жыл бұрын

​@@james-jg8iu I guess it depends on region. My harbor freight winds up giving you $5 when you return something with the receipt.

Excellent unbiased video. Dave is right on the money. Start with simple products and make your own mind with quality. Tarps, zip ties, screwdrivers, etc. They all work fine. You shouldn't compare a $50 power tool you find there to well known brand that costs 3 times as much. I always find stuff there I can use later. Just follow the sales and see what they have. IMHO, there is always something they have that will satisfy your needs.

@DIYwithDave

5 ай бұрын

Thanks!

@escapetherace1943

4 ай бұрын

I don't know man, some of their 50 dollar power tools get a lot done. The cheap ass impact wrench is just working for me

I buy tools for our ranch use at HF. Bought a 7” grinder to sharpen blades on the bat-wing shredder every month. Works fine. Reciprocating saw had the blade holder fall apart with normal use. 3/8” drill is ok. Hand tools, jack stands work fine for tightening tracks on the compact track loader…(just won’t get under it!) Budget level tools with a budget price. Choose your tools selectively and allow for failures occasionally. (Former Makita area sales manager)

Back in the mid-2000s, I was a superintendent at a large homebuilder in Illinois. One day, one of our tradesmen came into the construction trailer with a broken pneumatic nail gun. Might have been a Paslode - don't remember. He partially disassembled it to find a broken part relating to its air piston. After a bit of complaining and water cooler talk, the consensus was that he might go grab a cheap one from the local Harbor Freight to finish out his day. Upon his return, we gathered around in amazement to see that the "Chicago Pneumatic" tool was PHYSICALLY IDENTICAL to his broken big-name brand. Next, he took it apart to the same degree as the broken one, and we found that the internal parts were also perfectly identical - to the point that they fit flawlessly into the old tool. Reassembly and subsequent testing showed full functionality was restored. Conclusion? At least SOME products at HF are just rebranded big-name tools. Our tradesman kept the HF version and I never heard that he had problems with it. And that was in a high-volume production environment, so that's probably worth something.

@DIYwithDave

Жыл бұрын

That's a great story, thanks for sharing!

@josephgreenwood5729

Жыл бұрын

Doubt it. How would the new nailer work if it's parts were in the old gun?

@vaqueroespacio

Жыл бұрын

@@josephgreenwood5729 , he took the parts back out....

@better.better

Жыл бұрын

yes but keep in mind they're rebranded SECONDS... in the video he says their quality control is less stringent, but it's not really they're just the ones that were rejected for the big name brands. for example I bought a benchtop ring roller. the bottom roller on it was out by a 32nd of an inch meaning instead of rings it rolled corkscrews. since I was just using it for myself I didn't really care, but even so it was really annoying to have to bend it back straight after rolling before I brazed the ring closed. often times factory seconds are just cosmetic blemishes, for example I bought a egg size cast iron frying pan that had a large blob where the cast had chipped out, but this blob wasn't located on the useful portion of the pan it was up near the lip so it was still fully functional it just looked kind of ugly. the problem is with more complex tools you don't know which way it went was it cosmetic? or was it rejected for accuracy? or was it rejected for weakened structural integrity? maybe the glue they used on all the magnets that hold the driver bits in was the wrong glue... the new guy on his first day at the factory put the wrong glue in the machine. as he said though, you know the risk going in. maybe the batch of pliers that they get, are all the ones that are made as they're setting up the machine, and they all have different gap tolerances before the operator gets it on the money. it still work but the little wire cutting bit on the inside won't cut all the way through.

@better.better

Жыл бұрын

@@josephgreenwood5729 the way I read it, he took the parts from the harbor freight version to repair the broken one.

As someone in the trades, HF helped me out a lot in the early days in my career. I still have a random HF tool here and there in my tool bags. I never feel bad beating up on a HF tool. HF is great when I need a random automotive tool that I'll probably only use once or twice.

@wiredperformance6130

Жыл бұрын

There’s a reason my cordless are Milwaukee and dewalt. There’s a reason I own free replacement hand tools from harbor freight. It might be the fact the store is 3 miles away.!

@edjewsbury6298

Жыл бұрын

I have used harbor freight’s electric tools for years and they just keep working! Love the price of them too

@SW_BF2CLIPS

Жыл бұрын

I don’t think their tools are as bad as people think I think people just beat on them more because of the cheaper price. I have Milwaukee tools now, and I don’t baby them by any means but I’d certainly think twice before sending my 6 1/4 circular saw through a concrete footing. HF says fuckin send it.

@victorprice7431

Жыл бұрын

Some things are OK at HF for small jobs Some things are not. Just like the guy says. For example their hand wrenches are terrible the ones that say Pittsburgh on them they are good for scrap metal! I would rather buy used tools but quality.

@brianingell3174

Жыл бұрын

don't beat on any tools and you should be good.....

All good information and advice. One tool from HF I know of is definitely worth the money: Half-ton press. Stew-Mac sells the exact same press for three times the cost. Guitar repairers use these presses to install frets. SO buy the HF press and use your own homemade cauls for different fret radii.

Well said. I was so happy when Harbor Freight opened a store in my neighborhood. Wonderful place, but let the buyer beware. I bought tools from Harbor Freight back when it was only a mail order company, and I didn't have much money. I believe in Harbor Freight, and I am grateful to them for the many tools in my garage. There are times that I need something high end or task-specific, and I go elsewhere, but I nearly always try Harbor Freight first. Excellent video, and well done.

@LowenKM

3 ай бұрын

Yep, and apparently the upper management listens too! Was glad to see a HF finally open in my area, but unfortunately the new staff they hired seemed to leave a lot to be desired, with chronically surly attitudes and a store manager who liked to hire all his homies, but could obviously care less about anything else. So one day after experiencing one rude clerk too many, in desperation I contacted the HF regional manager w/ my complaints, though frankly didn't expect much of it. But upon returning to the same store a couple weeks later... lo and behold, the sales mgr, as well as every single clerk in the store, had all been suddenly replaced, and thankfully by folks with a noticeably more professional work ethic and a much more helpful 'attitude'! And maybe it was just another kinda 'quality control' issue, as mentioned earlier... though IMHO once notified, they also seem to do a pretty good job of attempting to make it right for the customer, even after the sale.

One of the things I purchased at HF (with a coupon) was a little "Dremel-like" rotary tool, for about $5. I've used it for many years, specifically because "it doesn't have much oomph". I use it for hobby projects, drilling and cutting plastics, where a stall from too much pressure is preferable to a crack. Limitations in the tools are not necessarily a negative - if you understand what you are using the tool for.

@beamon68

Жыл бұрын

Same here - bought Chicago oscillating tool with intention of ltd use of specialized wood cutting. After 3 years of abusive 😂wood cutting, metal cutting, sanding, the thing won't quit.

@ecoquilting7077

Жыл бұрын

That's a great point! My experience with that is finding that antique screws in old house hardware, like in doorknobs and strikeplates are all too easy to ruin (strip) with a high-quality screwdriver. I'd rather ruin a cheap screwdriver than try to replace screws you "can't" get anymore!

@kristophermelin7160

Жыл бұрын

The $5 - $10 blister pack was pretty underwhelming for me, however, the Chicago Tool (orange) variable speed one (mine was about $26) has been an absolute rock star. It was a little under half the cost of the "real" one, and I use it several times a week for model building and simple home repairs.

@EurocatGames

Жыл бұрын

@@kristophermelin7160 By blister packs do you mean things like drill bits, counter syncs, etc. I bought a set of counter syncs from HF and the one that I used was dull after one use. I've bought plenty of other HF tools and lots of them are still going strong though. I'm in need of a new cordless drill and the Bauer brand looks pretty good to me for the money.

@kristophermelin7160

Жыл бұрын

Blister Packs- referring to the rotary tools in plastic cases that hang in a peg rather than the ones that come in a box on the shelf.

I used to work at a large manufacturing plant that did a lot of large assembly on heavy equipment. They used Proto impact sockets, which are expensive. They would occasionally wear out with such constant use. I brought some Pittsburgh impact sockets of the most- used sizes just to put them to the test. They ended up outlasting the protos by A LOT. I eventually told my supervisor what I did. Our M.E. bought a set from harbor freight to do documented testing. It was officially proven that Pittsburg impact sockets had almost twice the life of Proto. They changed all the assembly stations over to Pittsburg, saving a huge amount of money. The Proto rep was not happy with me.

@joevarga5982

11 ай бұрын

Wow, that's crazy!

@alexia52118

10 ай бұрын

Pittsburgh products come with a lifetime warranty too! So IF they break, you can just take it in, and they'll replace it.

@brucepatton7662

9 ай бұрын

😮😅😅

@matthewmoilanen787

4 ай бұрын

While I'm happy that your Pitt sockets worked out well I question why an assembly plant would ever use Proto tools. They really aren't known for quality or durability by anyone in the mechanical or industrial industries.

@maplebones

3 ай бұрын

All sockets and wrenches are made the same worldwide using the same steel, no matter what brand they are. There is no way to make them cheaper, and no reason to make them better. I don't believe a word you're saying about Proto.

GREAT advice! I'm not a professional mechanic, however my father was. During my time in the USAF, I was an electronics technician on B-52 aircraft. I can fix most things, because I understand how many things work. But I don't consider myself a "mechanic or carpenter." I make my living as a CPA! I have MANY tools and I love to go to Harbor Freight as my first stop when I need a new or replacement tool. YOUR advice was spot on!

Great video. I always try to include Harbor Freight when I'm researching where to buy my next tool. Two of my purchases that I have been particularly impressed with are my miter saw stand and floor jack. The Hercules miter saw stand has great value, great features, and high quality. The Daytona 3 Ton Long-Reach Low-Profile Professional Floor Jack is well built and works great. Of course, I waited around a while and bought them when they were on sale.

I used to be a professional heavy equipment mechanic . I mostly bought “ quality “ tools like my wrenches ( MAC ) from 1982 , that I still have . That being said , my first experience with HF , was in the early 1980’s , and it was “ mail order “ ! I ordered a set of 1/2” drive deep- impact sockets . I STILL HAVE THEM and have worked on garbage trucks , and over- the- road trucks for years and years - they are still in my rollaway box 40 years later !!! I now have a retail store down the street ; I’m a “ regular “ customer , I’ve NEVER returned anything … ( I’m now a senior citizen and I walk up and down the aisles looking at all the stuff that I now can AFFORD , but my two knee surgeries , three triple shoulder surgeries , and five spinal fusions will not allow me to use anymore … )

im a high end custom furniture maker and I've been using their saws, compressors, paint guns, and dozens of other tools for over 12 years and have never ever had a breakdown or problems of any kind with their products and i never have to pay those high prices the the other stores charge. I stand behind Harbor Freight 100 percent ...MC

@Spanky00Cheeks

Ай бұрын

Prove it. Show some high end custom furniture videos.

I bought some medium sized handheld sprayers for water, chemicals, fertilizer, or whatever. I found they are great for spraying down large sections of my linoleum floor prior to mopping. Works well with diluted bleach for the tub/shower. Because the pump action is pressurized, it doesn't wear a person out with having to constantly pump a cleaner. Great for windows, too, as I can cover a huge area with very minimal effort. I've bought tons of small batteries through them, too. Great for my collection of flashlights.

Their current design jack stands are outstanding. They had to do two successive recalls on their older defective ones a few yrs ago, but they really stepped up and IMO the curent Daytona jack stands are the best of the chinese made jack stands on the market today. Their rolling hydraulic jacks are excellent as well.

In my mind, there is a difference between "cheap" tools and "inexpensive" tools. I was a heavy equipment mech for 10 years, working on Caterpillar equipment. To me, "cheap" meant poorly made, from inferior material. If I bought cheap tools it meant that I would consider them sacrificial; no big deal if I broke or lost them. "Inexpensive" tools were quality, well-made tools that I got at an excellent cost-savings, usually on sale, or buying them from someone who didn't need them anymore. Like Dave, I like Harbor Freight also -- for the right reasons.

@judgechan9036

Жыл бұрын

I love this comment and have been thinking the same thing for years. I had a friend working at the local liquor store back in the day and his boss made sure to tell him NEVER refer to the cheap wines as "cheap". Inexpensive is the correct word when referring to your own products that you are actively trying to sell.

@cewaffles

Жыл бұрын

I am with you here, the difference between Cheap and Inexpensive.

@mystictraveler8642

Жыл бұрын

We call that a good value. A quality product with a great price is a great value.

@oh8wingman

Жыл бұрын

I was hoping someone would point that out. Everytime he sad "cheap" when he meant "inexpensive" I cringed.

@arlissyoung8899

Жыл бұрын

Witt Wittwer I agree, HF tools sometimes may not make it through one job depending what it is. I have taken back a number of their tools back. On he other side I have had some that lasted for awhile then broke. I would go buy another one and take the broken one back for a refund because they keep the same tool line for a long time. I would take the new one out of the box put the broken one in the box and away it went. I would have the new tool the next time I needed it. I didn't do heavy work as you, mine was in the driveway DIY so that's not the same as you.

I bought a sawzall at HF for ~$20 to cut some tree roots I was dealing with. 10 years later I'm still using it for similar nasty jobs. It's held up way better than I expected.

@homerthompson6028

Жыл бұрын

Is it Chicago Eletric? I have that same one from ten years ago too lol

@phonymontana4254

11 ай бұрын

same here lol

@phonymontana4254

11 ай бұрын

@@homerthompson6028 mine is

@johnhart5011

10 ай бұрын

I bought the same piece of junk Sawzall from Harbor Freight when I moved into my condo. I put it on a shelf for 17 years never using it. Finally a friend asked me to trim some small branches off the bottom of his tree using the Harbor Freight reciprocating saw. I put a pruning blade on it and started to cut. Within seconds the piece of deal started to vibrate itself apart. I of course stopped and tossed it in the trash. I was lucky enough to score a Ridgid reciprocating saw on Offer Up used and have been tickled pink with its performance. I guess what you said in your video is true, "YOU GET WHAT YOU PAY FOR"!

@DDiez-ll6mw

7 ай бұрын

I bought the same power saw for $20 7 years ago & I abused the hell out of it. From pine trunks, solid iron bars, hollow metal fence posts, etc. It finally seized up last summer but I definitely got my money's worth.

A wheel from my push lawnmower broke. The original equipment manufacturer wanted $25 for a new one. I went to Harbor Freight and got a replacement for $8. The quality is great and it fit and worked perfectly. That was my first experience with HF. I'll keep them in mind the next time I need a part or tool.

This answered my question greatly 🤙🏻 thanks brother

Way back in the 70's, I worked as a welder in a small shop - one of the most useful tools we had was a needle scaler, which we used for chipping slag off welds (and also stress relieving by peening welds) in difficult to reach areas. I recently purchased one from HF (the "professional" model), and am very impressed with how well it works. I make sure I oil it regularly, and it really is a time saver. It's very heavy duty, I think it could easily be used on a daily basis without problems. I was doing some repair work on some old flux-core welds that had a lot of slag inclusions (flux core slag can be really difficult to chip off at times), and it really sped things up. If you're careful about your purchases, you can do quite well at HF.

@quantumtechcrypto7080

Жыл бұрын

Ironically it lasts just as long as the warranty.

@fritzkabeano1969

Жыл бұрын

Yeah, if you pay attention and have a keen eye you can spot tools that actually work and are a deal. You just have to be selective and realize lots of their stuff is "throwaway" after using it a dozen times

@paulcanon5533

Жыл бұрын

Well said. True.

@RRaider

Жыл бұрын

@@quantumtechcrypto7080 I have a ton of HF tools that I've had no issues with, in fact I've got a 2nd hand band saw from the 80's that still works like a champ.

@rossilake218

Жыл бұрын

Agree.. Always oil Air Tools whenever you use them. Put 10 drops in the line.

My father owned a construction company, and he bought the HF red pneumatic nail gun when he needed it for a quick job, not expecting it to last. Job after job that needed it, he kept using it. He expected to replace it when it failed, but it just kept going. He eventually bought 3 if them and they handled a great deal of abuse, and didn't stop. I can't tell if these were one offs from a decade ago or if there are still that good, but that is his story.

@dylanmckinley2068

Жыл бұрын

there are absolutely a cart load of hidden gems at harbor freight

@justinlast2lastharder749

Жыл бұрын

I bought a HF nailer. The Three different degree nailer, their most expensive one. It jammed halfway through every single Nail Clip. Returned it and bought the Makita from Home Depot and haven't had any regrets.

@MrGigs94

Жыл бұрын

I bought a heat gun once and that thing survived hell and back. I used it until the whole outside of it melted off and only had to toss it after I left it in the rain once.

@toltecnightmare

Жыл бұрын

@@rondoanderson same. I bought 2 about 10 years ago for $19 each to do all the questionable rough work and beat the piss out of, and reserving my name brand grinders for gentler use. The only one that hasn't even tried to die is the harbor freight, and the other one has never been out of the box. go figure

@morofry

Жыл бұрын

AvE did a couple BOLTRs on HF pneumatic impacts and was stunned that they were actually decent. He also BOLTRd some power tools and found they were garbage as expected.

I have lots of high end sockets but I find myself going for the color coded, deep sockets more times than not. I just started watching your videos and definitely seen them out of order. It’s funny to hear how much your stance or opinion has changed. Your videos are well produced and that’s why I keep watching them. Good job.

Great video, thank you. My experience with HF has been minimal but it fits with your view.

I was putting in about 500 feet of split rail fence, about 50 posts. I bought their one man auger post hole digger for $169. It had a 30 day return policy. I ended up with 5 of them before I finished the fence. Always took them back, never cost me a cent more. Different things went wrong with them. Ironically, the 5th one has held up for several years now of occasional use. Also they dug holes way better than me doing it with a hand digger. Video was spot on about wise choices. Sometimes you need the best tool, sometimes you don't.

@wb5mgr

Жыл бұрын

Maybe that’s why I constantly see the Mexican roofers and they are buying a new nail gun. They’re probably just swapping them out every 30 days. 🤣

@SnackAttack77

Жыл бұрын

Idk I'm on my second Predator auger, 1st one paid for itself 30 times over, current one is well on it's way to doing the same. Sucks you had to go through 5 for one project.

@jeremyscott6641

Жыл бұрын

But what was your time worth driving back and forth?

@jtcmlt1

Жыл бұрын

@@wb5mgr be careful, they may be swapping with you your wife's sexual time. Look at your kids eyes and make sure they look like you. Peace ✌️

@richis2fast4u

Жыл бұрын

5 trips to the store for 1 project would put me through the roof.

I still have and still use the 230v mig welder. I've probably been through 30 of the 10 lb spools and 50 of the 2 lb. I have made my money back 10 fold and can say I agree with most of the video but I also know if you read the directions you will have a tool that lasts much longer than if you just use like a name brand. For those who can't or don't know how to read, don't worry because you won't have read this either! 😉 lol

@chancemorine1642

Жыл бұрын

You'd be amazed by the amount of people that say things overheat or break during "normal use." "I was only using it at max speed for fifteen minutes straight. For a ten dollar orbital sander it's a piece of crap."

@saltycreole2673

Жыл бұрын

Read the Directions..., Communist!!! Lol! Seriously, reading directions is indeed a lost art.

@riffedwood5597

Жыл бұрын

Been wanting to get into welding, would you suggest their 230v Mig as a decent starter?

@ItsMeGiga

Жыл бұрын

​@@riffedwood5597 If you're going to weld around the house/hobby, I completely disagree with @UNKPCRIDE get the HF titanium 170. It's 120 and 240 and unlike a Lincoln, it's actually under 800. a comparable Lincoln is 900+. Until you step into the 1200+ range don't even bother looking at a Lincoln, their cheapies are virtually useless. I have a weldpak 80a and either I suck at welding or it's a sucky unit but I can barely stitch together 1/8" and the weld looks like crap. On my friend's Titanium 170, my welds look almost as good as his and he's been hobby welding for 10+ years. So yea, as a person who's used one of each in the same price range, HF all the way

@ItsMeGiga

Жыл бұрын

@@UNKPCRIDE so a few points, 1) no, there is no decent Lincoln for 600. the WP 125HD is the closest but it's 120v only, no gas option and I'd be floored if it really could do 125amp on 120. 2) the HF 170 has features no sub 900 lincoln does IE setup for gas, digital readouts, 110v and 220v capable 3) the 125 has even a weaker duty cycle! (20% @90amp vs 40% @90amp on 120). At any price below 1500 you're paying for the lincoln name, not for a capable machine.

Thank you cuz 😊 great video and with all the great feedback it literally a small catalog of info on what does and doesn't work or has and hasn't worked for people working with HF tools and comparisons will others. 🤝 Great work.

@DIYwithDave

6 ай бұрын

Thanks!

I buy a lot of tools from this place never encounter problems in returning some items, your presentation was very honest and clear. very well done thanks

To get started as a mechanic some of the most expensive things that no one thinks about are impact sockets. I bought a 1/2 drive, deep well set in metric and standard impact sockets in 2018. I've been using them continuously and they have standed true.

@MillicentDavis-mn7hl

Жыл бұрын

Led me to think

@d.e.b.b5788

Жыл бұрын

@@MillicentDavis-mn7hl All impact tools must be of a certain quality, so an impact socket from harbor freight will likely be just as good as the brand names. Ratchet handles, OTOH, the harbor freight ones will work, but high end brand names will have better fit and finish, and a bit stronger. My HF socket handles from 1995 still work, none have broken, but require a finger to stop them from ratcheting back after turning the fastener, while say Snap Off ones don't.

@pauly0410

Жыл бұрын

I bought the cheap impact standard, and metric sockets just for testing purposes. Two years later and they are still holding up.

@je19662008

Жыл бұрын

What was their brand name?

@yugoyankoff-vh7in

Жыл бұрын

I was wondering about these very items. Thank you.

One thing you failed to mention - their hand tools (i.e. wrenches & sockets) have a lifetime warranty. If you break it, just take it back for a new one. My son is an Assistant Manager at HF and he basically said the same thing - stick to the hand tools and avoid the "electric" tools. And I'm with the guy who commented below😅 floor Jack's are very good, as are their winches and other off-road products. They know if someone gets injured or killed because their product fails they'll face a massive lawsuit.

@DamianOzzy

3 ай бұрын

I disagree. Their electric tools are ok too for the average homeowner. Take a miter saw. I've owned it 10 years still works like new because I may have used it 10 times in it's entire lifetime. There is no reason to spend twice as much when you don't use it but you still need it for a project.

@rickg.188

3 ай бұрын

Yea, well they charged me a 30% restocking fee for a "broken" tool.

@REDMAN298

3 ай бұрын

never happened to me. They exchange broken tools for no charge.@@rickg.188

@markleng67

3 ай бұрын

@@rickg.188 Did you return it within the 30-day return period?

@erniea4424

3 ай бұрын

That warranty doesn't help much when a socket or a wrench breaks in the middle of something. I'll continue buying good quality hand tools from local stores. The exception: their tool storage seem to be fairly good.

I've been buying stuff from Harbor Freight for probably 30 years now. In the beginning the stuff they sold was pretty low quality but it was cheap and you knew what you were getting. Most of the things I bought then were specialty tools - things I would use infrequently but couldn't justify paying top dollar for a name brand name. They usually worked ok and if it broke so be it. Over the years however their tool quality has improved considerably. I've bought bottle jacks, a floor jack, pneumatic tools, paint sprayer, multi-tool, compound slide miter saw, tile saw, floor nailer, nail gun, grinder, trailer, etc. and I've only had one item fail prematurely. Some of the reasons you mention why they are able to sell at a lower price are probably true but what it's taught me is that some products are just more expensive because the company selling them wants a higher profit margin and nothing else.

@flyingsodwai1382

2 ай бұрын

Remember that god awful central forge brand? I haven't seen it in awhile. I once twisted a 1/8 hex wrench with my fingers....on the short side. Back then Pittsburgh was the better brand of tool they carried.

@richmac918

2 ай бұрын

Oh ya, I remember. I used to laugh at the name. Forged? Ya right. None of those tools was remotely forged. Complete junk

@andyrothauser1312

Ай бұрын

@richmac918 Unfortunately living costs in the US are much higher than in China so our labor costs are higher. It's not just always more profit. Also they can't organize in China to get a living wage so labor gets exploited and can't do anything about it. As the Chinese economy develops their labor costs do go up, and quality increases as it did in Japan after WW2. Now Japanese goods are high quality where once they were considered cheap jun. All economies go through the same cycle.

@richmac918

Ай бұрын

@@andyrothauser1312 You are absolutely right about everything you said and all economies go through this cycle. My comment about profit was directed at those companies that are manufacturing a product in China where their competitors products are being manufacturerd right along with it but their sell price is orders of magnitude higher. You could argue that they have better quality control (probably true) BUT the price difference is still way out of line.

Purchased one of Harbor Freight's 2000-watt gas generators several years ago. It was on sale at the time and a super good buy. I use the generator for electric power when the "street power" goes out. It still works and I am happy with it.

My last year in college I worked at a harbor freight and for starters, I was treated really well as an employee, which is always great to see a business doing. Also there were so many sales metrics that they wanted cashiers to pay attention to. When I would run the register, they wanted me to do my best to help customers find their products and then try and sell a warranty and a membership. It was a night and day difference from my experience working at Lowe's. There's also something to be said about working for a private business. I felt more inclined to do a good job because my labor actually effected my hours. I still stop by whenever I need a hand tool.

@AselflimitedcapitalisemW0mamon

Жыл бұрын

The money-empowered hierarchies of their fellowman (i.e. the corporations owners of the Earth's human money funneling human-ant-colonies.) Will treat you nicely because you are a higher level of human-ant you should see how the ants who build all of those cheap tools are treated (as employees) in those countries where "their" money empowered hierarchies "are even less human" (& more money empowered ant brained) - all for the money. Until the "capitalistic-mind-indoctrination-education systems" who own all of the ant-minded peoples entertainment systems on the face of the Earth. Got their Snowball Effect of converting all of the used to be free of charge Village way of life people into human and colonies over-consuming the face of the Earth. And never mind the climate change problem because money empowered science will fix all of that. So that the wealthy few can remain the wealthy few until they're over-opulence indulged & "created end." If we didn't believe as a human "race to the end" that is okay that we covet & buy every thing of excessive convenience from our Corporation owners who keep us toiling and buying a toiling for the excessive convenience of money to buy everything "we never needed" to naturally and ecologically sustainably supply our lives comfortably enough to to survive - on an Earth that God had originally intended to supply for all of his creation predominantlyfree-of-charge. But since we love to covet and things of excessive convenience to buy (more than the Creater Himself) now we're going to pay and pay. But only because we don't know Jesus quite well enough and because we are stubborn and want everything that are overlords on the Earth have. Which makes us forget that this is a temporary gig here on Earth. So if you don't want to create a village population maintained way of life where we toil for our provision from nature as we nurture nature for our provision. Then just keep being an over-consumer and you'll get what you pay for.

@tkleo2006

Жыл бұрын

People don't quit companies so much as they leave bad bosses.

@andybilakshow260

Жыл бұрын

@@tkleo2006 "boss" is indeed a 4 letter word

@borjealsbraden9874

Жыл бұрын

All i understood is you went to college.

@andybilakshow260

Жыл бұрын

@@borjealsbraden9874 Read it again then. It's not rocket science🤣

I bought a reciprocating saw from them and it self-destructed very quickly. Most HF items I've purchased have been surprisingly good. Their quality has gotten much better in the last 5 years. I've got two electric lawnmowers that work great! Two cement mixers are good, LED shop lights are very good, most air tools are good. Most electric power tools I've had were also pretty good. The bench-mounted blaster needed a lot of work to make it functional. Tie-down straps are pretty bad. The blue tarps don't last very long, but they're good for a couple of months outside.

I've been quite pleased with the floor jack I got there. I also have one of the inexpensive Pittsburgh tool sets I keep in my car for emergency repairs, trips to the junkyard, etc., so I can keep my good tools at home, only bringing one of those if I need it because it wasn't in the set. Their material handling equipment is pretty good, and I like their storage products, as well. Just for giggles, I grabbed one of their Badger 150 airbrush knock-offs, and with the warmer weather this week, I think I'm going to give it a try, and see how it does.

I buy from Harbor Freight quite a bit. The only tools I have been disappointed in was a drill bit index (they broke apart like pie crust) and a pneumatic framing nailer (jammed every 10th nail). Other that those 2 things, I have no complaints. There tools have worked very well for me and a DIY'r. I have several hand tools, jack stands, spindle sander, hoist, chop saw stand, pneumatic nailers, etc...

Back in the 1990’s, I worked in a diesel shop that used Pittsburg (harbor freight) impact sockets exclusively. These were available for all mechanics in the shop, and were beaten mercilessly. To my great surprise, none of them failed in the ten years I was with the shop. In fact, on my last day, I was given one of those old sets which currently sits proudly beside some Mac and snap on tools in my box. I don’t beat on them nearly as hard as we used to, and I expect this set to outlast me.

@sinustachgaming9283

Жыл бұрын

I work on Toyotas. I used a 21mm Pittsburgh impact socket and a harbor freight 1/2” impact when I first started. The impact gun still goes strong when I need it. It’s my back up now but that 21mm still isn’t cracked. 5-6 days a week 15-20 cars a day.

@davidhenry7450

Жыл бұрын

I run 2 very busy small engine repair shop in up state NY, I use harbor freight impact sockets and beat the crap out of them. They serve us well!!

@anonimous2451

Жыл бұрын

Those impact tools and also MOST handtools are guaranteed for life. If you break it take it back and they WILL replace it. I have not broken a impact set socket EVER.

@americanrealitytoday

Жыл бұрын

Made in Taiwan, it says something.

@kenvarga4454

Жыл бұрын

@@americanrealitytoday Most are made in mainland China by ccp owned companies. You are funding the demise of America.

Want to add that the newer tool boxes they make are just outstanding! Love the drawer sliders and quality finish. My wife bought me one of their huge roll around 48" floor cabinets when I retired last year. Has a wood top. Had to carry it home in the crate atop a flat bed trailer. (Trailer was a kit from Northern) It was on sale for $350. Weighed like 300#. Easy assembly. I managed to build it ON the trailer when I got it home. Then rolled it up the driveway to the garage. I felt like a kid at Christmas. It was more work to dispose of the packing material that it was to assemble it. Ten years back she bought me their $300 motorcycle lift for Father's day. Love it. Still works perfectly. The older and more frail I get, the more I appreciate it.

@jackwilbur9419

Жыл бұрын

@@moveon7564 apples & oranges. Nobody with 30k in tools puts them in a $99 box

@shelltoe_soul

Жыл бұрын

@@jackwilbur9419 forreal. Who has a full Snap-On industrial tool set that they spent $40k on but puts it into a HF rolling case? 😂 That is such a ridiculous thing to say. In a shop, I'd only be leaving my tools there if I truly trusted my coworkers and we had numerous cameras, serious high security roller doors over all the entrances, and an alarm system that was sufficient for me to feel comfortable. Plus my serialized fancy-ass tools would be properly insured anyways....

@nickaschenbecker9882

Жыл бұрын

Yeah, I got one of their rolling tool chests. The powdercoat was a little thin on some of the edges and absent on sharp corners of the lid, needed touched up with some spraypaint, but I ain't mad at it. Nice rolling casters on it, big hard rubber wheels, brakes work and the stomp tabs are a good size, lid's pneumatic. It's a big rolling chest with a ton of storage, nice and sturdy (it ends up being an ersatz workbench sometimes) and was, what? 1/3 the cost of something name brand?

@meyou245

Жыл бұрын

I bought 2 of the 72" top/bottom box sets on sale a couple years ago. I got a whole wall of tool storage space in my garage for under $5k. (I am a tool hoarder, so I easily have well over $30k in tools) They are comparable to the middle level name brand boxes like Extreme, Husky, etc.

I shop at this company, this info was useful for me. Your right about long lasting tools and up selling the warranty. I've been satisfied with my purchases but this information was useful in my next venture to this company. Your right they have great product. but I will pay closer attention to my needs. Thank you!

Anything I buy from Harbor, is for home use that I won't be using that often. So those cheaper tools are good enough to do the job when I need it. Good video and good advice.

Very good advice -- I've used HF tools for years and am generally quite happy with them for home/DIY projects and filling the need for seldom used, but necessary, tools. I have an old cordless HF drill that I dropped off a stepladder and cracked the plastic shell -- needing to finish the project I just wrapped it in duct-tape... 12 years later it is still working, although none of the original batteries have lasted half that long... on the other hand, I've blown the sides out of impact-sockets and now usually buy the pricier brands for many high-stressed tools... so, shop with wisdom, but generally HF is my go-to store for most things (especially consumables; like, grinder discs, sandpaper, gloves, filters and the like....)

I'm a big believer in not overbuying for what you need. Just as a typical home DIYer I've used several of their items. My favorite is the Multi-function Power Tool. Works great for cutting and sanding my occasional jobs and the accessories are cheap, like the sanding pads or new blades. If its something I had to make a living with, I might feel differently, but for my purposes they're great.

I fully agree with your thinking and logic. Any purchaser needs to have spent time considering what you want the tool to do (accuracy is important to me) and how long do you anticipate using the tool, then decide how much you can pay

I will sometimes buy HF power tools if it’s something for a one-time job or if it’s something I know I’ll only use occasionally. For example, when I decided to replace all the carpets in our house with Oak wood floors on a 3/4” plywood base, at first I rented a manual flooring nailer (you pound the nails in by striking a big plunger with a mallet). This was $25 a day to rent. After using this for one small room, I decided to buy a pneumatic nailer from HF. It made the rest of the house much easier to do and it lasted. Still works in fact, but probably wouldn’t be good for lots of jobs if I were a contractor. One tool I bought and returned from HF was an ICON to torque wrench. I tested it on a bench with a calibrated torque gauge and against an old craftsman torque wrench and this ICON was horrible!

I love that the 4 1/2” angle grinders are so cheap that instead of having one Makita and having to swap discs and brushes, I have 4 of them for the same price of a Makita, one with a grinding disc, one with a cutting disc, one with a flap disc and one with a brush, so when I am working I just pick up the one I need and not waste time changing discs.

@johnsheaman8057

Жыл бұрын

Me too. The same for drills for me. Saves tons of time from changing bits and driver heads

@dre3951

Жыл бұрын

I even paid full price (all $15) for my HF angle grinder, and am happy with it. I needed it away from home for a small repair on my Dad's house. Nice that it is so light and low powered, which is often preferable vs. the twice as heavy, twice as powerful, 8x as expensive Craftsman Professional one I have when I need that.

@tracybowden1801

Жыл бұрын

Good idea. We do this with our drills/impacts. If we need to drill, we grab the one with the drill. Or the one with the screwdriver bit for screwing screws. Or the nut driver one for that purpose. It works really well on cutting time down by not having to change the piece for each different use.

@sailr

Жыл бұрын

excellent idea!

@chuckweibel3433

Жыл бұрын

Years ago the heater blower in my car stopped working. I took it apart to find the brushes were worn to nothing. It was late Sunday and below zero and I needed defrost to get to work in the morning. With a little shaving of the brushes I dissected from the angle grinder, I repaired the blower. (I think a new blower was $120.)

I’m not in construction or woodworking, but I’m a hobby crafter. For my purposes, the Harbor Freight tools are perfect, because they’re in my price range. I do a lot of different home crafting “DIY’s” and looked at Dremels for their versatility, but couldn’t justify the price. The HF version was so inexpensive and the coupon made it even more so. It has worked great for me! I also love their fold up aluminum camp chairs with the pockets and the little pop-up side table…those were a bargain! Thanks for the video….lots of good tips and info!

@samholdsworth420

Жыл бұрын

Yup, you don't always need professional grade

@pointman2021

Жыл бұрын

I work construction for a living and build things at home as a hobby. Very little of HF equipment will ever see my job sites again (wrenches, hammers, etc seem ok; power tools are often a one use item. Others I work with get the warranty and just repeatedly keep returning the tools). But for my hobbies...things were theres not a lot of torque, no or few spinning parts, etc they're...ok. but like wire wheels...one can end up looking like a dang pin cushion only so many times before calling it off...lol

@dazzanw5067

Жыл бұрын

Lemme ask, how does it feel....Blindly supporting corrupt corporations? For profits... these corporations abuse human/labor rights laws, "corporate capitalist" corrupt corporations who manufacture/buy from manufacturer, that use forced labor/slave labor and child labor practices, so you get a product for a "deal" a nice low cost? No excuses, you are part of the problem!

@stolman2197

Жыл бұрын

I have an axe I bought there 25 years ago it's great steel(turns out I want the only person who figured it out). A few years ago they were selling a pretty good sloyd (greenwood carving) knife.

@beauburrell3318

Жыл бұрын

@@pointman2021 , have you bought a circular saw or a stone slab cutting saw from harbor freight? I almost pulled the trigger on one, but feared unreliability. Sometimes it is a luck of the draw on the power tools. It was only $365

I bought a top of the line finish nail gun to finish t&g pine in an addition, it last about ten minuts and blew an o-ring. Bought a cheap nail gun at Harbor freight and a year later it still works great.

I am a fan of HFT but do understand what I am buying. My first power tool from there was their low end oscilating tool. It gave out after 2 years. I upgraded to their "best" version and its going on 8 years just fine. I was also very happy with their larger compound miter saw, going on 8-10 years and have done a lot of DIY work with it. But if I was a finish carpenter and needed it to make my living, in would be going with more name brand. Heavy user of power drill and go name brand on those and most yard power tools. Also been quite satisfied with their hydraulic floor jack. Even brought a bigger one when I got an RV.

I agree with you on the "What to buy" - handtools. However, during that segment, you showed drill bits and utility knives. Bits and blades is another place where you need to spend a little more or you will be working harder and constantly replacing/sharpening edges. Great video! P.S.: You can never have too many clamps!

@shelltoe_soul

Жыл бұрын

HF has a 50 pack of utility blades for $5 that are honestly just as good as any other brand. Plus you are meant to put in a fresh one when you are doing something that requires precision cutting anyways. I do agree with you about drill bits, but HF now offers some decent diamond and titanium bits that are honestly not bad at all. They seem expensive compared to the rest of their stuff, but you actually get your moneys worth and I would recommend it without hesitation for anyone who plans on using those bits for more than just a few small jobs.

@cdouglas1942

Жыл бұрын

I like HF. I walked in with a broken clamp once and had not opened my mouth when an eagle eyed clerk saw me and shouted, "just go get another one!!"

@wymple09

Жыл бұрын

Harbor Freight C-clamps are garbage. I won't buy those again.

@cdouglas1942

Жыл бұрын

@@wymple09 Not perfect I agree. A little awkward to use with rear release. My small ones fail to clamp tightly. but the F style clamps are super.

@nickaschenbecker9882

Жыл бұрын

@@wymple09 YES. The plastic ones break under their own spring pressure. lol And hardened carbon steel is hardened carbon steel, eg. a razor blade is a razor blade. The same for files and chisels. Their little diamond coated nickel steel bits and burrs for rotary tools and die grinders work just fine, too. Never tried their drill bits. Maybe I should? See how fast they snap on me. 😂😂😂😂

HF is a gateway drug to woodworking! I'm super thankful for them and the price as it got me my first tool set. I've upgraded almost all my tools at this point but still have SO MANY CLAMPS from them - you can never have too many.

@royalway12

Жыл бұрын

I bought a dovetail jig there that no one around had in any other big box store. Made the dovetail joint perfectly when I rebuilt the cheap fiberboard drawers in the kitchen with real wood.

@kelligreer3975

Жыл бұрын

YES, my dad always said he could NEVER have too many clamps!!! Too funny

@jerrysmith6438

Жыл бұрын

You've got that right brother! And you can never have enough sizes of Clamps! Well.....or tools .... lol

@aldenconsolver3428

Жыл бұрын

They really do get you to thinking, '-well maybe I might just do that myself-'. You might save yourself a lot of money by cruising the place and maybe if it turns out that you really don't have the skill for the job, well you didn't lose that much either. I had a broken tile in the kitchen that I put up with for a long time, then saw their tile saw for like 29 bucks and discovered that tile work is kinda fun to me and I can do it plenty well enough. Have a sewer line that seems to block itself up pretty regular, probably put in without a gradient. Once a year I gotta pull out my HF Snake, and another 100 buck plumber bill saved.

@sevenwyatt7222

Жыл бұрын

Repent and live for JESUS CHRIST before it’s too late!!

I used HF to complete my tire changing station in my home garage. I got an air compressor and a retractable air hose reel. The air compressor is a McGraw 8 gallon tank and it has zero issues popping a bead on super stiff walled ADV style motorcycle tires. I also own three different style motorcycle lifts/jacks and all have been great for me. You just have to have a keen eye on what you’re buying but honestly, all the big “premium” brands have come down in quality over the years while some of the better HF brands have stepped up. The gap isn’t as large as it used to be.

greatest purchase was the chicago electric impact wrench, the big maroon one for taking of lugnuts...it's got quite a bit of power and was my most useful purchase.

I bought a Pittsburgh 19 piece wrench set 21 years ago. Used them in my private tool set at an electronics factory for 6 years. Medium weight work mostly, some heavier. Since then on bikes, shelving etc around the house. A great buy, they are in perfect shape today.

Harbor Freight is one of the few places where you can find color coded socket sets. Looking for the purple socket is a lot easier than trying to read 10mm even in the largest "high visibility" font. Pittsburgh sockets with a snap-on flex ratchet is one of my favorite combinations.

@shelbysnake5003

Жыл бұрын

Those colored sockets are the best!!

@justinthorne1919

Жыл бұрын

lol i do love their 8 dollar colored deepwell sockets for 1/4, 3/8, and 1/2" have a zinc galvanized bucket you can get them at the farm store they make a great rod bucket. but lol i put my set of 1/2 inch harbor wonton sockets in it lmao

@knux511

Жыл бұрын

Color coded is the best for when you're under the rig in muck up to your eyeballs with the ol lady up top helping. I could say a certain size, but "hand me the purple socket" just is so much easier on the relationship when you're contemplating kicking out the jackstand for an early release from hell 🤣

@wvp07

Жыл бұрын

Thanks for the sweet tip! My eyes are aging faster than me so I’ll def check those out.

So, I agree with all you have said. As a too man myself (my tools make my success) I have purchased Milwaukee hammer drill before that gave up the first day; and have purchased Harbor Frieight chain saw that I still use today (although the dead Red Cedar tree did play a number on the chain). I will still purchase from harbor freight above Lowes as the quality of lowes brand tools are not better than HF tools, but HF cost less. Thank you for your insight.

Excellent video and explanation. If you're buying a power tool that you don't need daily then Harbor is the place to go. Their tools tend to be heavier and louder than major brands but they work fine. I bought an electric leaf blower that is the best I've seen anywhere. If you need zip ties and tarps the selection and price can't be best. Their hammers work just like any other. Their socket wrenches are not good though. Mine broke in a couple of weeks on my job which I used it every day.

I bought a Pittsburgh 301 piece tool kit 17 years ago. It has served me well as I was an in home service tech for Sears and still run my own small engine shop. I've lost a few pieces but haven't broken any. Love my tools!

The predator generator that they sell is shocking good. I had that thing running for 4 days nonstop in 110 degree weather and it didn’t have a single problem at all and still now the thing fires right up with just a few pulls. I totally dig harbor freight and will continue to buy from them.

@_AndromedaGalaxy_

Жыл бұрын

Well not everything they sell is good. Their one gallon pump sprayers are garbage. Maybe 1 out of 10 holds up.

@jron20r51

Жыл бұрын

The key thing with their generators is to break it in how they say to.

@yal100

Жыл бұрын

lol pretty sure pump sprayers suck in just about every store. There is a few youtube videos on why and how to fix some of them 🙂

@mrsamick24

Жыл бұрын

@@jron20r51 I put gas in it and topped off the oil and let her rip. lol damn thing held up great

@ILMC1961

Жыл бұрын

My first predator 3300 inverter gen had a bad choke/run connector w/in a month. They replaced it and this one has been flawless. Just be sure to clean the exhaust spark arrestor as a clogged one will cause it to not run very well. Also have their 4400 pressure washer. So far so good on that too.

Simple explanation. Most of the cheap stuff is garbage if you're a pro, but great for the weekend warrior who's only going to use something once. But, their Expensive stuff is good. So they hit both markets. and make everybody happy...

Great video! I'm a sucker for their cheap storage solutions that have seemed to skyrocket in price at Lowes over the past couple of years. I'm a hobbyist woodworker and their clamps are unbeatable for the price. Bungees and ratchet straps are other items that prefer to get from HF.

I am a hobbyist to intermediate level wood worker. I have been buying Harbor Freight Tools for over 20 years (including power tools) and have never had a problem with any of them. My two key items are: a) know the tools limit(s) & b) never push the tool to it's limit, or beyond - I generally use them at 85% of their limit. One other thing I do is thoroughly inspect the tool before initial use - tightening anything that is loose and replacing any cheap part(s) that I think could become a problem during use. I re-inspect the tools after each 20 hours of use - retightening anything that could be coming loose and checking wear of cheap parts. If wear becoming excessive, I replace the part with a better quality one. As the say - an ounce of prevention is worth a pound of cure. I am very happy with Harbor Freight Tools and would not buy any other. They are great for beginners, hobbyists, and most intermediate level users. If you are a professional or heavy user, then you need to make the investment in high quality tools.

@Brad5161

Жыл бұрын

That's an excellent point. Don't buy a tool that needs to work at or beyond its limits.

@NJP76

Жыл бұрын

@@Brad5161 That is a good rule to live by no matter how much (or little) you pay for any tool. Keep it within the limits and it will serve you well for years.

@lfrey2001

Жыл бұрын

I totally agree. I build doors. My tools have all lasted for over 15 years. Plunge router, scroll saw, sander, table saw, and more. I work in pine and oak, never had a problem with those limits in mind. Love their tools.

@forrestcoleman2659

Жыл бұрын

I stopped reading at “hobbyist to intermediate”

This is an excellent video with great information. Harbor Freight definitely fills a need for folks who don't need the best quality. I sometimes think of it as my "disposable tool store", knowing that the tool won't last as long as more expensive tools. Dave makes a good point about spending more and getting the better quality for a tool you're going to use more often, or need to be higher quality for safety. But a lot of folks just need "good enough" to get through a project or two and HF tools are perfect for that.

@darrenattebery7776

Жыл бұрын

I bought welding gloves helmet 2005 still working great

I have bought the large breakover bar, and used it extensively in plant maintenance. It was extremely tested on breaking loose impeller bolts that were locked on due to heat and buildup, and had sevear stress applied. They held up great, much beyond my expectation. I also have the larger mill/drill, which performed great. My favorite though has been my press arbor, with a pneumatic jack, and the air compressor which works flawlessly. These were expensive items that I would endorse 100%. I also have lights, multimeters wrenches, and measuring devices such as dial indicators and micrometers. The dial indicators are as accurate as expensive ones though they don't last as long, but the upside is if you destroy one you haven't lost much, and instead of having to pay for rebuilding one you just get a new one for much lower cost.

My son, an HVAC Tech, recommends that new techs buy their first set of tools from Harbor Freight and replace them with higher quality tools when they break. Makes a lot of sense. As the video points out, if you don't use certain tools heavily, they will last a long time. Why buy a high end 13/16ths wrench if you almost never use it?

@dankyle6924

Жыл бұрын

I am the guy that even has two 15/32 sockets. If/when I need a tool I don't want to go to town to get it. But I have collected my tools over the last 52 years. about 75% are top shelf and the rest Harbor Freight. I still have the tools my dad gave me when I was 14 years old, I have worn them out pretty much though, and haven't used them in a long time. In my lifetime I have only lost a couple of wrenches and a couple of sockets because I was taught to take care of my tools by my dad who had his own shop and his living depended on them. Most were made in Japan and lasted though a lot of use though.

@maryberry6067

Жыл бұрын

Why buy the quality tool because the quality tool can become a family heirloom

@northernspike7434

Жыл бұрын

Doesn't harbor freight have a lifetime warranty on certain tools

@J0SHUAKANE

Жыл бұрын

Thats dumb. Cheap tools breaking is dangerous. Tools can be expensive, but so can an injury.

My Harbor Frieight stick welder is still doing great. Ive done some welding on my exhaust system mainly. And I wired in a 220v outlet instead of using the 110v. I think this is better for the system. Increasing the Voltage (potential) decreases the stress the Amperage (current) load required to weld.

Good video thank you. I also brought a reciprocal saw for 19 dollars 20 years ago and it has been a real workhorse!

I'm a Plant Mechanic for a Water District. I bought one if the HF "Titanium" 120V mig welders for use at home. That thing is awesome. It runs just as smooth [possibly smoother] than the giant multiprocess Miller in our shop at work. I don't use the Titanium machine daily, but for the small stuff on my old car project.. It works great .👍

Used to work at Harbor Freight; currently back in the CNC machining business, and I can tell you that their hydraulic jacks fall into two categories. Either they work right out of the box, or they don't . From my personal experience, they're not bad, especially when Snap On sells several models of jack where literally the only difference is what color the Chinese factory sprays it.

@rustypotatos

Жыл бұрын

So then are snap ons also in the two categories

@ContantContact

Жыл бұрын

@@rustypotatos Don't forget the quality control difference.

@michaeldose2041

Жыл бұрын

@@ContantContact Yeah, they pay a Chinese guy with a snap on hat big money to do that, lol.

@Skilful_basics8

Жыл бұрын

I have a motorcycle lift with lock outs from them. It’s down right awesome

@tomsuh1362

Жыл бұрын

I been using Their jack for years and they did last and still working. Its only good for personal or DIY use only.

Great video and excellent advice... I've been shopping at harbor freight for about 20 years and have had mostly good luck with everything I've bought...

Bought a framing nailer from them about 20 years ago. Never framed anything but some decks and a few other projects, continues to work well.

Harbor Freight welders, especially the flux core welders, are a great bargain! My TIG collects dust while that little 115v thing goes through spool after spool. It's also nice to have extra angle grinders with all the different attachments. The thing NOT to buy at HF are consumables like sandpaper, drill bits, saw blades. Look up Project Farm for comparison on individual tools to know what you're getting before hand.

@brianfuller4071

Жыл бұрын

I know what you mean about having an "extra grinder with different attachments" as I bought a corded Black and Decker 4" angle grinder at Walmart a few years ago, before we had a Harbor Freight in our area, then two years ago I went to buy another grinder from HF but they were "sold out" (of course...my store never has anything in it), but on the way home from there, I stopped at a yard sale that had a bunch of tools for sale!! One of the tools just happened to be a Bosch angle grinder and the guy only wanted $10 for it!! I grabbed that, a couple of large antique clamp, a hand plane and a orbital sander, for the money I would have spent at Harbor Freight!! It was one of the few times where my local store being "sold out" actually sort of worked in my favor, because thanks to them and their lack of quantity, I had the extra money for tools at a better price!!

@ContantContact

Жыл бұрын

@@brianfuller4071 That is the best way to get a deal if you can find it. Though battery operated tools are not, since the battery may be shot.

@alexg664

Жыл бұрын

Yes any blades and etc are usually junk from harbor freight. It sucks. Their Welders have for the past several years been extremely good. I have Millers, but those Vulcan brand welders are very nice for the money. Some of the their tools are identical to a Snap On or Mac tool. This is because tooling is expensive and patents are a thing, so if company x makes that specific tool all other brands are just up charging you.

@FixtIt

Жыл бұрын

One 3m cutting disc will outlast 6 harbor freight's. Actually cheaper when you take that into account.

@dudleydeplorable5307

Жыл бұрын

Project Farm is a great channel...!

This is a pretty good video, have wondered about this occasionally for awhile now. If you buy a few of the low cost electrical meters and you can't find one when you need one just have a few of those laying around your shop. And then, if one gets stepped on or smashed you're not out that much as well. It's nice to have a few of the higher quality brand tools like you say but, with the reciprocating saw I didn't feel like I needed the extended guarantee because, it was already reasonably priced and if anything happened to it a normally abused tool, I could just get replace it with a fresher one. And if you have one of their tools and it got lost, or left somewhere or stolen your not out that much with a lot of the Harbor freight tools. But that reciprocating saw has had the heck beat out of it and it's still going strong. What a good deal for just that one tool alone.

They have stepped up their game in recent years particularly on their boxes. The only thing that really dogged me was a couple pneumatic tools that failed me, but returned with no hassle. My Dad is a retired Snap On Dealer and we both go to HF when we need a tool we dont have.

i bought a compact jump starter/power pack there in 2017 and used it for years in a car with a bad electrical system so at least once a week and also used its 12v feature near daily through Feb 2023 and still have it all and still works to this day...actually picked it up at a huge discount in the returns section ironically.

I'm a mechanic for 50 years. After buying top name tools all my life I started buying from Harbor Freight for about 20 years. I've had some bad ones, but also really good ones. The best is a electric pole saw that I still use at home. Thanks.

@utubepunk

Жыл бұрын

Rich, throw us a bone here! Name & model number, please!

@tonyreed6342

Жыл бұрын

Yes please! I'm looking for a new one.

I bought one of the cheapest angle grinders they had about 10 years ago and it still works like a champ. Other then all my Ryobi stuff, I get all my other tools at harbor freight. Im a weekend mechanic/engineer and I have saved a ridiculous amount of money buying "cheap" tools. Can't really think of anything I have ever bought from there that didn't last or do what I needed it to do.

@BooBooGlue1

Жыл бұрын

Same. I love my cheap HF angel grinder w/ cord. Didn't know what I was doing with metal when I bought it and after a dozen projects I haven't replaced it, although cutting disks and grinding disks can very.

@springer-qb4dv

Жыл бұрын

Still using my super cheap HF grinder from year 2000! Of course I use it occasionally, but it lasts a long time for casual users. Also super cheap centec multimeter I bought from HF in 1995 still works

@talisikid1618

Жыл бұрын

Just wait, they will.

@allenhorak2622

Жыл бұрын

Along with every thing else you buy.

@duncanodeeshoes1003

Жыл бұрын

@@talisikid1618 I guess, but I haven't had a power tool break yet.

I also love Harbor Fright however, I bought a hand grinder that failed right away. Only problem was that after I bought it I didn't use it for 3 months, by then it was too late to take it back. I also bought a drill press that has lasted for 30 years and is still going. I'm with Dave. I selectively by from them.

I agree with everything said. If you’re a professional this may not be the store for you. For the weekend warrior, who needs a once off tool it’s perfect. I did buy a manual hydraulic log splitter and it works great, which I use when a pre-split log is too big. It is perhaps used 20 times a year and is a perfect choice for the job. Also I did buy a floor Jack. Used about twice a year, no issues with it. One disappointment, was a rechargeable drill. Never worked well and probably one of the more heavily used power tool. I do love harbor freight.

I was always told and have personally experienced this little nugget of truth; if you’re going to buy from Harbor Freight, stick to hard steel. Anything else, anything complex with components will not last longer than the first use or first week. Granted, my dad bought most of his workshop out of there and hasn’t replaced but a few tools over the years. It’s definitely a difference in what you expect out of them versus what you put them through.

I bought the 14" bandsaw and upgraded the components, set it up properly and I LOVE it. I also got the large drill press and I love that too. I think these tools are good upgrading platforms.

After doing a bunch of research I bought their mini lathe and mini mill. After some tuning and slight modification they have both turned out to be great machines. It's not like you will do professional machining with them but they are fantastic for the hobby machinist.

I have outfitted two business shops with HF tools. Many consisting of hand tools and bench grinders. They have worked great. My father bought a welder and 15 years later I still use it. Now the businesses are not construction they provide service and repair so the heavier used tools at generally screw drivers and hex wrenches and I go through about 2 sets a year. I never buy the warranties because if the tools break it’s cheap enough to buy new ones and I figure when they break I will have got more than my moneys worth out of it. I would never buy a drill from there but my bench grinders are great. I think the tool boxes are over priced but the chested drawer that I bought 4 years ago is pretty nice. I always recommend Harbor Freight

Got a belt sander for some home woodworking projects something like 8 years ago. Thing is still running and going strong. I also have some terrible failures from harbor freight, like cast parts that split apart first use. That belt sander though, still going, and love getting cheap consumables from them like you said, like zip ties.

I have one of their early orange hand grinders that I purchased over 20 years ago and it is still running strong! The Portland saw you spoke of, I have one of those that I purchased over six years ago that is still working well. Pacific power washer as well. It has a lot to do with how well you maintain and use the right tool for the right job.

@talisikid1618

Жыл бұрын

And how little you use it.

@kenc439

Жыл бұрын

I have had no problems with the stuff I got from them the couple of times I did they stood behind their products.

@jaybird7534

Жыл бұрын

This is true.

@jonfink7618

Жыл бұрын

The old Grinders were awesome! I've gotten years of hard use out of them. The new Drill Master stuff is junk.

@JesseAutoDiag

Жыл бұрын

Disagree 👎🏽👎🏽

Agreed with all that you advised. But I would like to share this experience... On a couple of properties, we ended up needing to do about 20,000sq.ft. of 1"-"1.5" flagstone, cutting and shaping every piece to make patios, walkways, etc... We were using 4" angle grinders to do all the custom fitting. There were Makitas, DeWalts, Milwalkees, Hitachis... the lot. Running these for hours on end, and with the amount of silica dust the work puts into the air, the failure rate was incredible. Grinders costing more that a hundred dollars needing to be replaced roughly about every week. I thought, for $20, I'd try the Harbor Freight version - what could it hurt? Right? Turned out, they failed often. Very often. At exactly the same rate as the units costing 4 to 5 times as much! So to spend the same money as the others, I got about 5 times the amount of work done. Said another way, I paid 20% of the cost I would have had to pay for the almost weekly replacements regardless of brand. That ended up being a very huge bonus. But the other side of another coin, I've had some hand tools bought there fall apart in my hands. Soooooo,,,,,,, yeah, compare your needs with what they have and calculate the cost or savings. Have fun!

This is a very good subject. I know in power tools that the bearings mean how long something will last and wear time.One thing I won't buy are glues or chemicals. I did a repair under my car to find out the glue was previously frozen it did not harden. Removing the failed material too twice as long as the whole job.

I have a ton of HF hand tools from their Icon brand. They’ve been great and I consider myself really lucky I can afford them vs some of their other hand tools. They are a lot better made. I am not advocating a line mechanic swap out their SnapOn stuff for Icon but as a serious auto mechanic hobbiest, they were a good investment for me. My battery operated tools are however brand names as are my safety tools like jack stands (Esco), but the hydraulic jacks are also good for my needs and have served very well for years without issues. Great video! Very well balanced viewpoints. Well presented and fair.

I needed a cross-slide vise. I looked at reviews for HF and several online sources. I noticed that some years would have better reviews than others, as if some batches were better than others. I chose HF because if there was a problem, exchanging was a short drive, not expensive (heavy!) and time-consuming shipping for exchange.

Excellent presentation, Dave

The only item I ever bought at Harbor Freight was my low profile floorjack. I bought in 2003 I believe. It’s 20 years old and still works. Yes it’s made in China. It was once priced at $189.99. Kept dropping by 10 bucks. When it came down to $129.99 is when I bought. I thought I got a good deal 😂. It eventually went down to 79.99 in around 2006 or so. I think the same one is currently 89.99 with coupon. Mine says 2.0 ton though while the Pittsburgh one says 1.5 ton. Nice vid. 👍

So as a traveling mechanic, I must say I stand behind most all the tools I buy from H.F. I have been mechanicing for 27 years and I just love them. I have even found that they have many tools that out-do the name brands. I will agree that cordless tools are somthung to spend a bit more. Yes, many of them are made in the same factories, as you said but the quality is very different.

@skwalka6372

Жыл бұрын

As far as I know, "mechanicing" isn't a word in English, but it should be. I'll use it anytime I have a chance, thank you for coining it.

@dirtystockcardriver

Жыл бұрын

I've been using "mechanicing" for several decades. Its probably a southern/country thing

@nfpspointblank8023

Жыл бұрын

I agree with you as another mobile mechanic and in shop mechanic where we use harbor freight tools all the time. we use their jacks ,engine hoist and they are fantastic there. Cordless drills and impacts work. Great for deer way home projects. The earthquake impact brand is actually fantastic. I’ve used it for many Engine teardowns. I have yet to find something that that impact can’t takeoff. I personally had that impact for over 2 1/2 years and still working great the only thing how to do it was replace the battery We also have Mac and snap on tools. But in my personal opinion, they are just overpriced tools and they break just as often as the harbor freight tool steel with a huge difference. Snapon does an honor their warranty that well, when it comes down to certain tools for mechanical, such as their floor jacks Harbor freight tools pretty much come with the 90 day warranty and from my personal set on Harbor freight tools, I’ve been using them over 2 1/2 years seven days a week kind of hours and projects. And I broke and maybe 1/3 of the amount of Harbor freight tools. Compare to snap on.

@mjasz4341

Жыл бұрын

I've been using the Bauer line of cordless for about 4 years now, and while they aren't the highest performing cordless tools out there, they certainly work well and have lasted through all my abuse. Haven't had any issues with them so far and haven't seen much battery degradation over time either

@tonyreed6342

Жыл бұрын

@@skwalka6372 I initially read it as menacing!

This is a good report, Dave. Thanks! I never got anything I had to take back! My little drill-press bought ten years ago, is going strong still. Also my Micro-Mill!

Harbor freight is great for certain items and improving them with do-it-yourself upgrades. I have a friend who bought one of their sand blast booths and made it really good after doing the upgrades he found on KZread.

The best products I have from HF. The Hercules miter saw and stand. I will put that saw against anything. It always wins by value.

As a HFT employee I can say your view is very valid. Harbor Freight sells many different levels of tools from beginner or "one time use" items to more professional grade tools, especially now with the Earthquake, Icon, and Hercules brands. I personally have used the Bauer brand tools extensively, and they have kept pace with other people's DeWalts, Milwalkees, etc. tools. Yes there are lemons that make it to the shelves, but at least in my store, we will either replace or refund your tool should it have some issue. I can't speak for every store across the country, but if you're in the SW Florida area, chances are you will get a good tool for your money, and if not, we will make it right for you.

@dougdouglas3945

Жыл бұрын

I agree, Harbor Freight is great.

@mrbriancandoanything709

Жыл бұрын

Harbor Freight is a place to buy a tool you may use only once or twice. I used many higher level tools/electric operated tools and they crapped out! FYI, never buy the lower end cordless drills or their knockoff channel locks!

@dougdouglas3945

Жыл бұрын

@@mrbriancandoanything709 I agree about the lower end items, i.e. drills, saws, and you make a good point.

@icewaterslim7260

Жыл бұрын

The Bauer drills are a bargain coming with a charger, even though the chucks let go of a tool a little easy. just remember to twist that chuck shut tightly on a big drill.

My father supported six kids using garage sale junk tools all of his adult life. He never bought a new anything until after he was retired and discovered Harbor Freight. I once what changes he would have made in his HVAC career and his words to me were “I would have bought good tools”. I suspect that his ghost is wandering around a HFT store today.

@alshaw9420

Жыл бұрын

my father picked up cans of the ditches and has 10 cars and 20 homes and 20 billion in cash just by going every saturday morning for 2 hours

@ChrsGuit

Жыл бұрын

I'm in the HVAC field myself, and the majority of my tools come from Harbor Freight... I've seen some of the guys I work with lose multiple sets of their $30-$40 Klein dikes, pliers, 11-in1's, etc... I don't buy the cheap Pittsburgh stuff at H.F, but I do buy the Doyle brand handtools... Those guys are constantly losing their expensive tools and buying new ones while I keep up with my stuff... but if I did lose one of my tools, it's a fraction to replace... The Doyle stuff looks identical to the Klein stuff... same tooling marks, stamings, casting marks, etc... Probably made in the same factory...