WOW...that's almost as good as the polishing wheel that i got from Harbor freight for $1.99 but alot more work.

@Jamie-cz2xu

7 күн бұрын

Yeah but why waste time and some loose change on buying the proper thing when you can spend hours on a project that barely works and get mediocre results?

I was a metal worker. So I use grinders quite a lot. I've seen discs explode, (quite regularly) I've seen people catch loose clothing in them and the grinder has climbed up them and hit them square in the teeth. I've had it happen to me and luckily my tshirt jammed it up just below my neck. I've seen all kinds of accidents with them. Even a fine disc can chew flesh up VERY quickly. I just would never use a grinder without anything but 100% respect. As manufacturer intended. Edit: it's cool to read the working men of the world in agreement with regards to safety, because I know it comes from experience and respect for yourself, your trade and tools. Also, it's nice to have a shared experience and respect with people in the trade from round the globe. All the best from England.

@phunkeehone

Жыл бұрын

When I was an apprentice, a disc exploded 40-50 cm from my face. To this day, I still don't know how I didn't get hit by a burst of shrapnel. I was wearing safety glasses, but it could easily have done some nasty damage. Stay safe out there, guys.

@mystiquesquared

Жыл бұрын

Used to use big air powered 7 inch grinders at work. They demand respect. Lots of power to grind through those weld. Had a tiger buffing pad we used on stainless to pretty up after grinding and to smooth the edges catch the very end corner and I was in a hurry and was stepping around the piece. Well that wheel wrapped up in my shirt and tore it shreds, barely left a mark on me though. A buffing wheel. Can't imagine what an actual grinding disk would have done to me. Yikes.

@pparrker5420

Жыл бұрын

You sound incompetent dangerous infact .

@garethjohnstone9282

Жыл бұрын

@@pparrker5420 Oh, why's that?

@garethjohnstone9282

Жыл бұрын

@phankeehone48 Those discs do just explode sometimes. It happens. The moron who said I sound dangerous and incompetent in reply to my comment obviously hasn't worked with grinders day in day out for years, because if he did, he'd know It can be an insignificant little thing that you catch the disc on and it just explodes. It's spinning that fast. Sure wakes you up. Also makes you realise why eye protection is so important.

Прикольно получилось! Но из валенка быстрей и надежней!)))

@user-no2mu6up6e

25 күн бұрын

Откуда у них валенки, пимы ещё скажиие😅😅😅

@BillSikes.

23 күн бұрын

Do you mean "Valenki" 🤔

I've only used this once to sharpen my mower blade kzread.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 but so far very happy with it. I've never used one of these so took me a bit to figure out how to set it up but once I figured it out it did the job just fine. This is likely a single purpose tool for me to use on my mower blade and possibly the occasional axe sharpening so didn't see any need to spend a lot....this will do just fine!

@richardmahaffay992

4 ай бұрын

Time is money how long did it take to make and wait for glue to dry. If you are going to spend the money on polishing compound for just a few dollars more buy a buffing wheel. Harbor Freight has a kit with 3 different compounds for under $20

@youknoweverything7643

2 ай бұрын

That pad is we call it a tigers paw in ship yards and fab shops been around for many many years nothing new

@itechhen

2 ай бұрын

@@richardmahaffay992 I'm sure waiting around for the glue to dry isn't time counted... Go do something else numb nuts. This can be made essential free during "free time" or as a change of pace. No one works 24/7, so "time is money" argument is bullshit. Why buy it at harbor freight? Why give them your money especially when it's not always the best option for everyone

@ronsmate

5 күн бұрын

I bet you married your sister.

For all of everyone's iron polishing needs. Another idea is to go out and buy a polishing wheel.

@Airgunfunrich

Жыл бұрын

Just about to say the same!

@pupinek123pupinek2

Жыл бұрын

@Chem Cloud Chris oh my god :D :D :D you are right !

@hirnzilla7043

Жыл бұрын

🤣 stupid

@jmjm6607

Жыл бұрын

or steel wool would have worked also lol

@mikecartlidge5355

Жыл бұрын

If you look at the surface of the iron after it has been wiped with a cloth you can see it has gouges it it were the wheel has dug in.

Here's a tip, while buying the buffing soap buy a buffing pad at the same time from the same place.

@dasmuss6174

Жыл бұрын

The cardboard was from a box of buffing pads

@lonewarrior6633

Жыл бұрын

Don’t forget, the £2 for the glue!

@nikiguymer5840

Жыл бұрын

@@dasmuss6174 😂

@mikemur

Жыл бұрын

This guy has invented how to get 11M view in 7 days using a cardboard. That is very good invention to me.

@jamesportrais3946

Жыл бұрын

@@mikemur Stay tuned for the next instalment: things to do with cat hair!

Let me just waste an hour of my time to save $2

@SCfanIam100

Ай бұрын

Exactly some people have time to waste I guess.

@claudepoirier4592

17 күн бұрын

@@SCfanIam100 We are not all rich americans

@Jabberwocky818

4 күн бұрын

@@claudepoirier4592 Then you probably couldn't afford a grinder in the first place...

@claudepoirier4592

3 күн бұрын

@@Jabberwocky818 I have a full shop full of tools, Including a grinder, and have a god day just the same.

You know they make pads that do the same thing and are safe to use....and are inexpensive. Why anyone would put something on an angle grinder and spin it at 9,000 - 12,000 rpms is a Darwin up and coming runner for the title. Cardboard or anything.

@maxdorey6713

5 күн бұрын

24 million plus views is why

Для меня это диковато потому, что есть войлочные круги, которые этот эрзац из картона не заменит.

@serg-III

Жыл бұрын

точно, войлок гораздо лучше справится с задачей.

@enerjayser

Жыл бұрын

...мужик просто вышел из положения...., войлок куда-то завалился! Мне понравилось... 🔥✊👍

@user-je2xs4zv4k

Жыл бұрын

Видать за войлоком идти неохота

@user-qy9cf8cp4r

Жыл бұрын

Зато бесплатно

@serg-III

Жыл бұрын

@@user-qy9cf8cp4r Старые валенки тоже бесплатные. Я конечно не против если кому то зайдёт эта поделка. Мне это напомнило: "Дай дураку стеклянный хер он и его разобьёт и руки порежет"

Обожаю таки лайфхаки, когда есть деньги на DeWalt и нет пары долларов на полировальный диск))

@vladimirgemini861

Жыл бұрын

И вагон свободного времени на дебилизм)))

@barmaley912

Жыл бұрын

Правильно говорил Задорнов...Они там все тупые...

@cheshir23

Жыл бұрын

Так у него и деволт китайский))

@Predchel

Жыл бұрын

​@@cheshir23так и круг можно китайский взять, паста то у него есть

@user-rd6hs8dn3m

Жыл бұрын

Нет старых валенок, а на новые не хватает.

Mission accomplished. 4 minutes of my life I'll never benefit from and will never get back...

@louie12330

Ай бұрын

Why wouldnt u just skip thru it lol

@user-dd2gf1it1t

28 күн бұрын

@@louie12330"It's curiousity that killed the cat." The video got 4 minutes of my life too.

@claudepoirier4592

17 күн бұрын

@@user-dd2gf1it1t Just go to bed a bit sooner tonight

@royharkins7066

13 күн бұрын

And another few writing diss an if u reply and go on about moi spelling it’ll be a couple more 😂😂😂

So you went over budget on the DeWalt grinder and couldn't afford a polishing disc then?

Wow! Not only did I have several old boxes just sitting there, uselessly waiting to be recycled, but I also had several hours without anything to do. This solved both my problems! What a life saver! I tried to impress my wife with her new mirror polished clothes iron, but she refused to carry it in her purse as a vanity. The ingratitude!

@h4n5i

Жыл бұрын

probably pissed because the iron wasn't plane anymore

@coolhandluke1503

Жыл бұрын

@@h4n5i we can fix it with more cardboard

@TrionBulldog

Жыл бұрын

Sounds eerily like something an electrician would say.

@seventeen912

Жыл бұрын

I feel ya pain brother! It’s not your fault though! Many unsuspecting people are caught up in the quagmire of “Cardboard reuse” annually! Many victims! I see it all the time and I just give them bubble wrap and it seems to oppress their desires temporarily. Just know there is help for you cardboard junkies…..and i am willing to help! Matches or a cigarette lighter is a positive start!

@andrewroberts7428

Жыл бұрын

stop being so negative

Гениально! А не подскажете, как из стула сделать табурет?

@DoctorBetterverywell

Жыл бұрын

Alexey Запросто !!! Отпилить спинку у стула :-))

@CleverMetaphor

Жыл бұрын

😂

@user-qp9ke8xo3p

Жыл бұрын

Нужно спилить ножки 😂

@user-ip9bj7bu8y

Жыл бұрын

Продать стул и купить табурет

@lordven5563

Жыл бұрын

Очень просто! Берете картон из диска, рисуете на нём табурёт, склеиваете картон обратно и вытачиваете из стула табурет сверяясь с чертежом.

So either spend half a day crafting a blade with materials you don’t even have unless you buy them OR spend $5 and buy a polishing wheel…

Fine grade wire wool for the iron works a treat and a lot less hassle. I've used autosol and wire wool for years for many metal polishing jobs, doesn't take long either. Even used tin foil on to on some jobs. As for the knife, I wouldn't use this particular idea. An old leather belt with the same compound is great to strop with👍🏻. I can see theis wheel useful for de rusting large pieces though.

@itechhen

2 ай бұрын

Wire wool attachment for angle grinder works awesome, but only on certain jobs. Wire wool cannot hone a knife edge, while this or any mdf buffing wheel can.

Having shiny tools is far less important to me than not inflicting bodily harm on myself. I like my eyeballs too much to try this.

@johnnycastellanetta7183

Жыл бұрын

@CStone I also value the rest of my physical well being. At least in regards to getting cardboard thrown at me at dangerously high speeds!

@AmigaA-or2hj

Жыл бұрын

Oh! I see. Said the blind man to his friend.

@user-ej4yn1eh9f

Жыл бұрын

Тогда одеваться нужно как Робокоп. У него костюм подходящий😁

@michaelarmbruster586

Жыл бұрын

Your no fun

@johnnycastellanetta7183

Жыл бұрын

@@michaelarmbruster586 I'm no safety inspector, but there's a lot of just plain dumb stuff people do on the internet. It's my experience that when we hurt ourselves, we are usually doing something stupid. Sometimes that's only clear in hindsight of course!

I love 'Thinking outside of the Box' & diy ideas.. I can't help but believe this will deteriorate quickly. Super quick if it gets wet. This being said, his results were nice. Saving older, damaged foam pads is my go-to for junk work.

@mdj.6179

Жыл бұрын

Buffing jewelry often you dip it in water to cool it. Thanks for bringing that up. I wasn't thinking of the wet operation of this device

@tobybigham4196

Жыл бұрын

I agree. It is a cute and novel idea, but in no way did he re-invent the polishing wheel. If anything it gives you some clues on how it is built. But the artist who demonstrated this didn't use nearly enough binder if you want to keep cardboard at that RPM speed in 1 piece. I can easily picture some kid trying this and losing an eye.

@tendiesoffmyplate9085

Жыл бұрын

Cardboard isn't rated for 8000 rpms. This is just dangerous. Full stop.

@tendiesoffmyplate9085

Жыл бұрын

@@jpsholland I used to do a lot of angle grinding and got a paddle bit caught in a coat once. Needed a new coat and new pants.

@my3dviews

Жыл бұрын

"Thinking outside of the box". In this case, literally using the box. 😂

what type of polishing compound did you use ? Love all your videos.

Putting an angle grinder near a knife like that seems like buying a ticket for the Darwin awards

@misterwirez7731

2 ай бұрын

Yeah a bench grinder would be much safer... or a Lansky sharpener.

Yep one buggered up iron with blocked steam holes. However cardboard was a great item in my military kit, used it with brass cleaning fluid to polish brass belt buckles etc, very effective (but strangely only needed hands to do it!)

@Mogwai06

Жыл бұрын

I'm confused, I mean believe your statement, I'm not arguing anything whatsoever. The part I'm confused with is when you say you "only needed hands to do it...' So like, what other parts were you using to "polish people's brass"...? I'm guessing not feet.

@robertwright957

Жыл бұрын

@@Mogwai06 electricity

@bigduphusaj162

Жыл бұрын

​@@Mogwai06 obviously he meant a power tool. You came in a cardboard box mate if you couldn't figure that out.

@Dustin2112

Жыл бұрын

​@@bigduphusaj162 He meant that all too often you wind up using your fingers/hands polishing detail brass. It's pointless to try to use something else when you wind up getting it all on your hands any way.

@davealexander1201

Жыл бұрын

Didn't you see previous post it's not cardboard it's corrugated.

It is already patented..... and refined. Consider this as a " back to basics" tek. I have never seen nor done this nor am I claiming to have knowledge of the origins of polishing wheels but concepts are so similar that it would be hard to believe that this one hasn't been done ( probley for money) somewhere. I am not trying to take anything away and I really do like this idea.

I've been a metal fabricator for almost 35 years and a trick I was shown years ago was basically the same thing only on a bench grinder using the grinder with the guard reversed for reverse rotation and buffing compound for sharpening knives. It works great.

@Scummy_shovel

27 күн бұрын

I bought this super expensive very well known and recommend knife sharpening wheel for my grinder. I’m almost 99.9% sure all it is is cardboard lol. It’s the best method inhave found for sharpening blades in a hurry tho so I don’t guess I’m complaining. It was disappointing paying the price. And when I got it I thought. “wtf. Is this cardboard”.

I've been looking high and low for a way to polish the bottom of my 21 year old iron and stumbled upon this video. Oh happy day! What a time to be alive.

@dennissecor8092

Жыл бұрын

That's amazing!!!

@user-vd6mc9qu1p

Жыл бұрын

Мудило.

@jmc8583

Жыл бұрын

Is "iron" some way to anonymize your son? 🤔

@leo5verling334

Жыл бұрын

Scotchbrite, job done. Cardboard is amazing- my workmate used to stand in a cardboard box to keep warm.

@user-uy6vb1ut7p

Жыл бұрын

Мы такое не курим.

Спасибо всем тем кто посмотрел этот ролик! Теперь автору хватит денег на полировальные диски здорового человека и ещё на хорошую болгарку останется! 😁

@iskanderrarus5957

Жыл бұрын

У него аппарат Dewalt, ты в курсах поросль? )))

@shutkaymora

Жыл бұрын

@@iskanderrarus5957 А чего это у тебя так подогрело???

@iskanderrarus5957

Жыл бұрын

@@shutkaymora та видно катушка сгорела. не обращай внимание на дураков

@shutkaymora

Жыл бұрын

@@iskanderrarus5957 Бывает... Если что я не имел в виду что у него плохой аппарат, просто ещё один но аккумуляторный - лишний не будет! 😉

@Rew612

Жыл бұрын

В войну деды и прадеды на заводах картоном резали рельсы и о патентах не думали

Amazing idea. Thankyou! I am a hobby welder and need to clean out some rust every now and then.. will try this.

This a save!! Bloody amazing!! Thank you Bob England

Polishing takes off material so keep that in mind if you're going to try this. Look closely and you'll see its not completely flat. They also sell polishing wheel which i would trust a bit more. Cool video though

@michaeldimmitt2188

Жыл бұрын

And wear safety gear for your face, neck & eyes. When that short-fibered paper has had to much flexing it will explode. But maybe it will wear down before it gets to that point. Roll the dice and find out…

@douyou99

Жыл бұрын

お金を使うと完璧な物ができます。しかし彼は安価な物を使用して研磨しています。本来捨てる段ボールですが一つ工夫をして研磨道具をつくりました。 私はその段ボールをより良い使い道を考えたいです。

Хорошая идея, надо только завещание написать😂

@gilbermann

Жыл бұрын

Кому-то достаточно написать пин-код своей карточки )

@alexandrp4699

Жыл бұрын

А защиту поставить СЛАБО ? она от всех дисков защита !

@AleksandrBorziy

Жыл бұрын

Здесь только Доктор Дью поможет

@misterShon

Жыл бұрын

И что тут опасного? Ты когда в магазин за продуктами выходишь, тоже не забывай завещание писать.

@AleksandrBorziy

Жыл бұрын

@@misterShon опасного здесь гораздо больше, чем толкового

I've seen similar done with a similar thickness of MDF. Of course, the cardboard would be safer as if it does self destruct its going to have less mass behind it

Complimenti per l'idea. Non solo è un modo per riciclare oggetti destinati ai rifiuti ma diventa un nuovo utilizzo molto utile e meno pericoloso e più economico rispetto ai soliti dischi abrasivi.🤗

Ну блин, я думал листы железа будут пилить картоном 😆

@denisl2760

Жыл бұрын

Its possible, just going to take a very long time

@user-uu9ii8to9h

Жыл бұрын

200 полуляхов!

@maximmaklakov4803

Жыл бұрын

Обломил

@user-jw3lg2bk4s

Жыл бұрын

Все тефлоновое покрытие с утюга сполировал.

@denrus4282

Жыл бұрын

На следующем виде пропитают эпоксидкой и будут пилить

Hai una creatività veramente eccezionale! Grazie💡👍🏻

Muito bacana como faz com o papelão. Boa ideia para fazer no quadro da bicicleta.🙌👏👍👍

Use of cardboard is definitely creative, but was wondering if there is a way to attach it to a sander instead, because of safty concerns

This sort of thing always makes my mind wander to the next level. I'm anticipating a slow day at work so I'll be using this idea to make a full-sized spare tire for my car. What could possibly go wrong?

@mikelaver9158

Жыл бұрын

Ptttffff!! Hahaha ha.

@Turbo442

Жыл бұрын

Nathan this is your boss stop looking at KZread and get back to work.

@2009dudeman

Жыл бұрын

@@Turbo442 Mr Bailey, I am the assistant to your regional manager, please stop browsing youtube looking for employees and just look over their shoulder like the rest of the managers.

@TheAgentAssassin

Жыл бұрын

How the turn tables. I declare bankruptcy.

@nathanielnicholson559

Жыл бұрын

@@Turbo442 Nathaniel, thanks. I can watch whatever I want at home before work ;) and it looks like @2009dudeman from corporate's got your number... By the way, would you please secure your tie before it hangs over my shoulder and gets caught in my high-speed cardboard? Thanks so much.

The editing process to shorten video enough to keep people watching till competition is more remarkable than final outcome for me

@steviefordranger198

Жыл бұрын

that makes zero sense.

@bomma2694

Жыл бұрын

​@@steviefordranger198 👀 🤦 as in..... That would have taken hours and hours to do with cardboard?

@hr7055

Жыл бұрын

@@steviefordranger198 Are your parents siblings?

@DP-gb8qu

Жыл бұрын

@@hr7055 lmao

@eggspanda2475

Ай бұрын

@@hr7055

Use a large metal-tooth hole saw instead on a stack of clamped cardboard to do it faster; you'll get the circles and holes quickly.

THANKS FOR THE WONDERFUL TIP & VIDEO! YOU CERTAINLY ARE A SMARTIE!!! GOD BLESS!

For those who think this is a great idea, first try using a 4000 rpm grinder rated pad on a 8000 rated grinder . Make sue you had full PE before trying this, then come back and find out why this is not patented

@elowideman9638

Жыл бұрын

Do not try this on a 10000 RPM grinder!!!!!! Any piece of cardboard turning at 3.5 KM per second can be lethal! I had a 10000 rated disc in an air grinder that was turning 120000 RPM and it blew up, one piece took a chunk out of my leg, never found any other bits of the disc ever, that happened over 30 years ago.

@user-zd8er8pq1z

Жыл бұрын

Тока кофемолка здесь поможет

@marknalberta

Жыл бұрын

This project is ridiculous.

@marknalberta

Жыл бұрын

Dude this is moronic

@TheHighborn

Жыл бұрын

at least youtube doesn't show the dislikes so you know it's safe /sarcasm

Доктору DIY отправьте, он точно знает, что с "этим" делать😁

@JackalLEONK

Жыл бұрын

В отпуске он...

@NURS98

Жыл бұрын

Что за черт такой ?

@user-dp5if5cv1y

Жыл бұрын

Пропал он куда-то!((((

@TheProRazor2012

Жыл бұрын

Заебись: сначала нож из картона, теперь - шлифовальный диск, в рот мне зубы...

@user-ex8ec1ux3r

Жыл бұрын

Надо срочно проверить эту технологию хуйняметром

Would a hardwood or softwood circle be better?

Give the guy a break and congratulate him. He just invented a polishing attachment with all the elements of danger we didn't grasp around age 14.

*Congratulations, you've invented the polishing wheel.* _Luckily I can buy one for a couple bucks and don't have to spend two hours making one from scratch._

@MikeOxlong-

Жыл бұрын

@@jpsholland try 25-35,000 rpm… 😂

@mungous1000

Жыл бұрын

In truth, I didn't think it did a great job anyway.

@kadmow

Жыл бұрын

@@MikeOxlong- (a quick search has 11000 or so... maybe your souped up direct drive diegrinder...) Don't put 4 inch cardboard on a diegrinder.

@JimmyJones666

Жыл бұрын

​@@jpshollandNa same shit different day bud haha

@nemnemz12

Жыл бұрын

or risk your own safety

У меня похожая штука в работе еще с советских времен. Только диски сделаны из лосиной кожи толщиной ~4 мм (были тогда такие магазины "Сделай сам", купил там обрезки) , 6 штук в стопочке и зажаты между двух кружков из фанеры. Схвачены на гайку болтом М10, сточенным у хвоста на трехгранную фаску под губки патрона дрели. Намазываю её зеленой пастой ГОИ. Работает, как Золушка уже 4й десяток лет. Удобная вещь и по ходу часто требуется.

@SamJones-sv4yl

Жыл бұрын

But turns into a pumpkin later?

@snoopu2601

Жыл бұрын

That's being creative, people don't realise other countries it's hard to come by certain tool's to make life easier. Man has to do what he has to do to get job done.

@techtinkerin

Жыл бұрын

Отлично идея 👍

@user-ry1vu1im7o

Жыл бұрын

@@SamJones-sv4yl )))) "Открылась дверь, и появившаяся в дверях прислуга спросила по-венгерски: - Что вам угодно? - Hem tudom /Не понимаю (венгерск.)/,- презрительно ответил Водичка. - Научись, стерва, говорить по-чешски." (с)Я.Гашек. Похождения Швейка

It's rare you get to hear about something no other human has thought of and it's even more rare to witness it. Behold the only recorded moment in all of this great universe's history of an iron being polished.

@Shilo-fc3xm

Жыл бұрын

@@jpsholland Careful though. That toothpaste will sting if you get it on your vagina.

@billredding2000

Жыл бұрын

"There is no such thing as a new idea. It is impossible. We simply take a lot of old ideas and put them into a sort of mental kaleidoscope. We give them a turn and they make new and curious combinations. We keep on turning and making new combinations indefinitely; but they are the same old pieces of colored glass that have been in use through all the ages." -- Mark Twain

@chaznewportnewport1612

Жыл бұрын

It is truly a promethean moment ...what a time to be alive

@4kingace379

Жыл бұрын

They didn't think about it because anyone with brains would buy a disc that will last 50x longer for $3 🤣

@nm-mack4778

Жыл бұрын

4/0 Steel Wool works wonders....

I experienced cardboard as nice go to when figuring some stuff out like making a pre-template for wooden cutouts, but thats where the good part ends, anything else it is way too fragile in most cases. I know that theres doors and walls and even furniture made of the same principle, but those are produced to last, not like packaging cardboard boxes

Why can’t y’all just appreciate his creativity!? This is a very cool idea!! What if you went bankrupt, you’re broke, you need to sell some silver plates or some tools you got lying around and can’t afford a buffing pad etc? Now you can get top dollar for your personal items cuz you were smart enough to know how it make them look brand new without spending a dime! I for one admire the ingenuity!! Thanks for sharing!!

@traveler189

3 ай бұрын

It’s incredibly dangerous… that tool hurts many people even if used properly.

@mjsmith2633

3 ай бұрын

Watch how creative the surgeon is when he makes a new eyeball when this thing invariably explodes cardboard at 200mph in your face.

@midwestbd7144

2 ай бұрын

@@mjsmith2633I would sure hope anyone using a grinder is smart enough to wear eye protection. Cut off wheels are way more dangerous

@ronsmate

5 күн бұрын

Agree, cool if you're a dick. What you don't appreciate is how dangerous this is, and how time wasting, and downright stupid.

This is called a rotary polisher. Usually it operates at a slower RPM and uses a type of fabric to hold the polishing medium with a more durable base. There have been higher RPM polishing tools using a similar type of corrugated paper as well, however usually not quite as high RPM as an angle grinder. It can be overly abrasive at the angle grinder speeds. Of course this depends on purpose. You'll find that it is very easy to ruin the symmetrical edge of a blade sharpening it with this method. However, this method could be useful to remove surface rust in a heavily degraded blade.

@user-ml2ss6we6k

Жыл бұрын

Для удаления ржавчины куча прекрасных инструментов, способов и химии. Так что и тут это дерьмо не нужно.

@drunkrtard

9 ай бұрын

So can I sharpen a knife really well with the polishing wheel on my bench grinder?

@chaseknowls4624

9 ай бұрын

@@drunkrtard, if you know how to sharpen a knife and can get the proper and correct angle, then yes. How the hell do you think J. A. Henkles, Gerber, and Kabar puts that laser-polished look and razor sharp edge on all their knives???

@genarogamez8494

6 ай бұрын

​@user-ml2ss6we6k I use vinegar and a tooth brush to remove rust.

@WillBravoNotEvil

5 ай бұрын

@@chaseknowls4624 You're collapsing grind and polish. Doing so negates all that follows.

Definitely works much better if you crush the cardboard to make it more dense. Also seen it work with plywood, particle board, heavy cloth, heavy paper, or anything porous and strong enough. Be very careful if it catches it can explode.

@bigduphusaj162

Жыл бұрын

​@@bobs8005 these people are off their heads, even a smaller 7ah Makita will destroy any bodged attachment almost instantly. These people must have grinders from the pound shop no joke coz some of my larger Fein and Makita ones would kill you if you attached a piece of wood to them and actually touched anything. Jeez even wire brush attachments don't last long at all on proper grinders

@aaronst542

Жыл бұрын

What most people dont realize, the cardboard in this video is just a media to hold the BLUE BUFFING COMPOUND he is using. The cardboard isn't doing anything but acting similar to a soft felt buffing wheel, the compound is engineered to be abrasive to metal for polishing. So its like me using rubbing compound by hand to remove a scratch. the buffing pad or microfiber cloth isn't really doing the work (some pads are aggressive and do cut, but primarily its the compound) So TLDR, if he did this with just cardboard and no compound, it wouldn't even touch the dirt on the metal tbh (Polishing metal is one of my jobs at my shop. we Polish aluminum and use those compound sticks and airway buffs on grinders to make aluminum look like chrome)

@leehaelters6182

Жыл бұрын

Bill N, are these disks you've seen used on bench grinders, angle grinders, or mixed?

Would like to see the knife edge geometry free hand with a polishing wheel.

what was the stuff you put on the grinder before you sharpened the knife?

Or you could just buy a buffing /polishing disc.

@mikekemper9566

Жыл бұрын

Bingo

@MattnUska

Жыл бұрын

But then he wouldnt have a video that’s getting comments. 😂

Nice video, I enjoyed it and gave it a thumbs up, Its not patented because it is dangerous, and when it eventually reaches the glue parts on the spindle it will be more abrasive than anything or glue bits will go flying. Angle grinder needs to have lots of respect and eye safety, I'm a normal person that uses an angle grinder a few times a year, already have had a sanding disc dettach itself from velcro holder and fly straight to just below my eye and also while cutting a cupboard in half in a difficult to reach spot the grinder crawled out of my hand with a wood / aluminium cutting blade and crawled right into my finger fortunately i pulled away from it, it left a deep gash. Angle Grinder Respect +1000

@itechhen

2 ай бұрын

Dangerous yes "because of the glue"?. Absurd nonsense. It's an angle grinder which are inherently dangerous, that's why it's dangerous. It's not patented because companies don't want buffing wheels to fit an angle grinder that is why they sell you a bench sander. Similarly, you cannot buy wood cutting blades for angle grinders. They want to sell you a circular saw or multi tool instead

@rid1coza

2 ай бұрын

@@itechhenThe Chinese shop where I stay actually sells an angle grinder blade for cutting wood/aluminium. It makes a awesomely clean cut in wood and very fast and smoothly with very little dust. Dangerous little thing it is!

Neat play time trick...but this buffing wheel is too stiff as evidenced by the uneven surface...

If you use the right kind of wood disc it just might be useful for cutting something especially if you want to impart a smoky flavor to what your cutting

This must be just the 1st episode of the series of 2 videos. The 2nd episode tells you how you wear yourself into a bulletproof protection equipment, to not get yourself damaged when that piece of cardboard start flying astronomical speeds. The 3rd optional extra episode could tell how you protect the room around you to not get damaged by those same fragments of cardboard.

@johnsamu

Жыл бұрын

The bulletproof vest will be made out of CARDBOARD ofcourse 😉😉😁😁

@user-ny9ez9bv5p

Жыл бұрын

На всякий случай можно одеть телогрейку и каску с маской.

@tobybigham4196

Жыл бұрын

@@johnsamu Don't forget there is glue involved, and probably some more polishing paste..... lol

@MikeOxlong-

Жыл бұрын

@@jpsholland yea, it appeared to be plugged into a variac or something similar… it certainly wasn’t getting full voltage or running at full speed…

@owenbruce4120

Жыл бұрын

Use a flapper disk...safer quicker

Yeah the guy just re-invented the polishing wheel, but i think it was more just a neat demonstration how well carboard actually works. Im curious if the layers of glue affected anything.

Thanks for sharing..best knife sharpener and buffer ever…

Well done --buffing wheel from cardboard ?--sharpens too ! NICE IDEA ---but Wear eye protection --just in case !

I imagine because you're not showing how careful you need to be with it not to rip the cardboard and have the thing come flying off at a great speed.

@alexmuhsa4096

Жыл бұрын

Это русский,он глупый

@pparrker5420

Жыл бұрын

Yawn .

@violenceislife1987

Жыл бұрын

Do you even know how to use tools?

@richard1313

Жыл бұрын

@@violenceislife1987 yes I can spot a tool quite easily

@chusdiaz9160

Жыл бұрын

🤣🤣🤣🙏

*Instructions unclear.* All of my knives have a mirror-like finish but all my hand tools are now razor-sharp.

@elmoomle4565

Жыл бұрын

That's genuinely funny! Meow...

@thegardensentinel

Жыл бұрын

Helpful:: All my mirrors are as sharp as knives, just need to look at them and you're shaved! Want a waterproof one to descale the boat!!! ☺

@genewilliams617

Жыл бұрын

HAHAHAHHAHAHAHAGAGAGAGAHAHAHAHAHAHAGAGAHSHSASASAHASGAHAHAHAHAHAHA......PIG NOISE!!!!!!

Nice trick! Maybe a little too hard for most polishing works...

I will make this out of the amazon box that the polishing wheel was delivered in.

I don't know which is more time consuming - reading the hilarious comments or watching the hilarious video. I applaud the poster for making money on this content. Cool.

Just use a soft scourer on the iron, done in 30 seconds

@Noodle999

Жыл бұрын

Much better than removing the coating that's supposed to be there 👍🏻 Who wants an iron that's shiny and useless 😂

@rodc4334

Жыл бұрын

@@Noodle999 Cheap irons have no coating. Those are best picked up at some flea market for $3 and used around the shop. 😀

Its because carboard also contains a mixture of contaminants such as glass ans dirt making it an abrasive, thats why knives go blunt super easy when cutting cardboard

Cardboard is grossly underestimated in most mens workshops ive seen

They already make that tool. It's usually used for putting a matte finish on stainless or aluminum.

@mikecartlidge5355

Жыл бұрын

I think the tool or disc you mean uses Scotch Bright 230 grit in the fashion of a flap wheel but needs using with care for your safety's sake.....gloves and safety glasses.

@lloydfancett3039

Жыл бұрын

@@mikecartlidge5355 no I mean the cardboard disk. And never wear gloves with an angle grinder.

@mikecartlidge5355

Жыл бұрын

@@lloydfancett3039 well I had a slitting disc shatter on me and I was thankful of the gloves I was wearing as some of the particles hit near my wrists even though the grinder had a guard in place.

@my3dviews

Жыл бұрын

@@mikecartlidge5355 Where I used to work, we weren't allowed to wear glove when using grinders or drill presses. Because if you get your glove caught in the tool, it can destroy your hand. Several years before I worked there, that was exactly what happened to one employee who broke that rule.

Pretty cool idea, you could patent it, but i think the main factor why this isnt out there yet is the impracticality and time of production plus the huge wiggleroom for error... normal polishing discs are very straight forward to produce and crave very little time

@aaronst542

Жыл бұрын

if cardboard was a suitable material to make polishing wheels, they'd be on the shelf friend. Felt is dirt cheap. the Denim or whatever they use on airway buffs are super cheap. they're just starched to be harder and rigid. This man is out here re-inventing the wheel when we're using flying cars. Also the only reason the cardbaord did ANYTHING AT ALL is simply because the blue buffing compound he used, is an abrasive. Virgin cardboard would acheive legit nothing

@seeharvester

Жыл бұрын

I sure hope you have a financial advisor Max.

@cargob3627

Жыл бұрын

Solche eine Polierscheibe aus Wellpappe könnte recht einfach und kostengünstig hergestellt werden. In der Wellpappindustrie gibt es Klebemaschinen (Kaschiermaschinen) und Stanz- und Quetschmaschine (Tiegel) für eine mögliche Produktion. Mit den Maschinen würden die Polierscheiben nicht einzeln, sondern z.B. 20 oder 30 gleichzeitig hergestellt.

@maxbennedbk7085

Жыл бұрын

@@cargob3627 well, then id say go for it, if it's cheap, and the majority of the machinery is readily available, you're only a piece of paper away from creating quite the unique product... only issue is, where are you gonna get enough for mass production? not a lot of usable cardboard ends up anywhere in usable conditions... but im sure you've got a solution for that too, now get out there and change the world! ;)

@cargob3627

Жыл бұрын

@@maxbennedbk7085 Hallo Max! Danke für deine Antwort. Selbstverständlich würde für die Produktion neue Wellpappe aus recyceltem Papier/Pappe verwendet. Mittels der Zusammensetzung und des Anteils von reyceltem (kurzen) Papierfasern und frischen (langen) Papierfasern kann die Härte/Festigkeit der Wellpappe beeinflusst werden.

Great idea for your cardboards. Another diy tip of the day!

Спасибо, Уважаемый ! Главное, видимо, чтобы картон не задымился, от температуры, при трении. Микро полировка - супер !

@DavidOsterman-co7lz

11 ай бұрын

Войлочным получше будет...

@user-vq1rj7wp8v

2 ай бұрын

От помянутого задымления - выручит регулировка оборотов. Не знаю, как на этой УШМ, но на моём инструмене Stanley Fatmax такая возможность есть.

@dimusticantiparty4264

Ай бұрын

тогда презентуем альтернативу зажигалкам: Этот секрет все производители УШМ скрывали!!!

That reminds me, I've been meaning to polish my channel locks. They have never looked the same as they did when I bought them in 1978 at the flea market in San Andreas. That has been bothering me. Thanks for the hack.

@AffordBindEquipment

Жыл бұрын

polish them up and then they stand out and someone will steal them. Better to keep them dull and uninteresting.

Great Idea. I live in a remote area away from towns, and stores, in the bush where my shops and home are. I'm purposely removed from so-called civilization. I've come up with some innovative ideas to get me through. I appreciate making due with what's on hand.

@hewych

Жыл бұрын

If you make something like this,lets just hope the so-called ambulance from so-called civilization makes it to you before you bleed out ,fool.

@seventeen912

Жыл бұрын

Great idea???? Hope you didn’t “remove” yourself to far away from a hospital! Stay safe my friend, and don’t believe all the bs

@commonground5214

Жыл бұрын

@@seventeen912 Out of curiosity, which bs are you referring too?

@jhonviel7381

Жыл бұрын

i feel like power tool company's astroturf these tool-hacks so you keep buying their chinese shit than actually make good products.

@hewych

Жыл бұрын

@@jhonviel7381 Even so called Chinese shit is better than this,spinning something like this tht isn't meant to go 8000 rpm is not oonly stupid but dangerous.

Variable speed grinder a must

I always wondered what the early days at 3M were like. Thanks for the history lesson.

Thank you for making this video. Very good for when you can't just go out and buy things as several geniuses mentioned. Content appreciated

@genevandenham7999

Жыл бұрын

Stop encouraging poor people.

@ubreakitirepairit3569

Жыл бұрын

Much cheaper to buy all the stuff needed to make this huh?

@alexandercopeland2849

Жыл бұрын

Well, if you watch close you will see that he used a buffing wheel instead of the card board. Card board wouldn't have lasted 1-3 seconds with that rpms. I build smaller cardboard for Dremel and drills where rpm is control able.

@newtybot

2 ай бұрын

@@ubreakitirepairit3569 ?? It’s fucking cardboard

@ubreakitirepairit3569

2 ай бұрын

@@newtybot you alright bruh?

Ottima idea Maestro, grazie! 👍

Wirklich sehr gut,da hat ein alter Metaller wieder was dazu gelernt,danke 👍

Hat a health and safety nightmare waiting to happen lol

I like the creativity, and I always have wayyy too many cardboard boxes from deliveries! I wonder if it might be better to only glue near the center, so the hardened glue doesn't make areas that are more abrasive than others 🤔

@Katster

Жыл бұрын

Or you could just you know.. buy a polishing wheel? That's better in every single possible way. If you put any kind of pressure on that cardboard it will shear off and fly across the room with some force Do not do this, ever.

@SajtosNokedli

Жыл бұрын

@@Katster thank you, Mommy

@rustyshackleford792

Жыл бұрын

@@aaronst542 cardboard and paper are quite abrasive. Wood fibers are tough and also contain tiny particles of silicates that are very hard and abrasive, in addition to abrasive dirt and debris that the box material picks up in its life from production to the big recycling bin in the sky. Ever break down a bunch of cardboard boxes with a knife? It gets dull very quickly. In fact, many of the fancy super steels we drool over in high end pocket knives were developed for industrial slitting blades. When you are slicing miles and miles of cardboard, paper, carpet, etc, during a shift, factors like edge retention and wear resistance are paramount to minimize downtime spent resharpening and replacing the slitting blades.

@robertfreeman5231

8 ай бұрын

@@rustyshackleford792 Fantastic!

@newtybot

2 ай бұрын

@@Katster ”do not do this ever” armchair warrior

the coolest is the suggestion with the iron. And how does he get the smeared polishing paste out of the steam nozzles again? Does he build a cotton swab for this purpose?

This feels like a solution to a problem that doesn't exists.

Can you make a seashell flake/ epoxy blended shaving razor next please? With a handle made of coral and clear epoxy if you can.

I myself have used multiple sizes of grinders on almost a daily basis for twenty plus years. I have learned the larger sizes like 10" are far less dangerous due to the fact that they demand the respect of your attention to safety. The smaller 4.5" or 5" grinders seem to give a disbelief that they somehow aren't as dangerous...this is the exact opposite of what really is, I have been injured more times and in fact damn near lost a thumb because of it. The smaller the more deadly in my personal opinion. These things are not to be taken as anything but deadly or at the very least extremely dangerous to handle. That being said, I have come to believe that the cordless versions of these are substantially safer when doing something questionable because most have a clutch which I've never seen on a hardwired grinder. Just my biased opinion of course.

@TheWickkit

Жыл бұрын

Thanks, I actually just asked my fiancé if there was a safer grinder out there somewhere because we have an unspoken, unofficial rule that I do not use the grinder because of safety reasons. So I use my dremel. But sometimes that is obviously much less effecient!

@johnwattdotca

Жыл бұрын

If you tried using one left-handed you would pump up your biased opinion, for sure. Cordless are nice because you're not off-balance with a cord or having one to step on and create pull. I got a quarter-inch grinder to the bone on my big finger, unable to play guitar for over six months.

@MRCKify

Жыл бұрын

Use a guard. It'll save yourself a delaminating.

@williamreilly5469

Жыл бұрын

​@@johnwattdotcaI'm a lefty for life

@DP-gb8qu

Жыл бұрын

I think the RPM difference between 4 and 10 inch grinders might play a role.

I mean how much is a polishing wheel thats designed and built for this purpose? I cant imagine the price warrants this when considering it will last longer and perform better. Probably safer too. Could see this being a potential fire hazard or might even be more likely to catch on something.

If only it were possible to buy some sort of ready-made buffing disc for about £3...

Holy crap that was a lot of work to make a disk that is surely available at the store for a few dollars.

@my3dviews

Жыл бұрын

And that won't explode from the high RPMs.

@paulpower7018

Жыл бұрын

They are 3x as much now

@911WASanINSIDEjob420

Жыл бұрын

It's called free. And clearly it worked so seethe more

@Katster

Жыл бұрын

​@@911WASanINSIDEjob420 That's some good sarcasm there!

@user-uf2iv6ih4p

Жыл бұрын

Ты внутренний голос доктора дью что ли?

Can I get my angle grinder back please? I need it to do some - angle grinding!

Great idea. What polishing paste did you use?

Polish and a buffing wheel seems to work well also. I build mine out of popsicle sticks and marshmallows !

Можно ещё из старых джинсов кружков наделать, собрать диск для полировки.

@lairdcummings9092

Жыл бұрын

Your idea would be much more safe.

@Za_pobedu_

Жыл бұрын

@@lairdcummings9092 ты не понимаешь русского юмора)))

@user-kq5yj2dl1e

Жыл бұрын

@@Za_pobedu_ скоро он вам пригодится.

@7Valeriy

Жыл бұрын

Запатентуй или сними видос:)

@alexpups2401

Жыл бұрын

Джинсы куй его не знает,а утюг можно теперь выбросить.

This an excellent idea! I use those fluffy polish wheels in jewelry work and they can get a bit pricey to keep replacing!!! Do u have a recipe to make the polish/rouge, that stuff is really expensive to keep buying?????

@user-zd8er8pq1z

Жыл бұрын

Как дрочить хер у барана??

@1islam1

Жыл бұрын

⚠️ God has said in the Quran: 🔴 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )} 📖Quran

One of the first clause in patent law is that it should not be obivious and that it should be a unique invention. No one is stopping you from making it a product and selling it in the market.

Hey, that's a buffing wheel, except , a lot more work.

Needed to explain to a young colleague, we don’t have time to do things the ‘quick’ way, nor can we afford the ‘cheap’ way

This (similar) has been invented. As a teen in the mid 70s I worked at a golf course. We used a card board paper wheel (cardboard boxes are corrugated paper) to polish irons to look new again.

@vladtheimpala5532

Жыл бұрын

Seems to me that it would be difficult to hit a golf ball with an iron. Do you swing it by the cord or what?

@Imagezone61

Жыл бұрын

@@vladtheimpala5532 No.. you kind of whip it! 😆

@vladtheimpala5532

Жыл бұрын

@@Imagezone61 😀 Whip it good.

@RobMacKendrick

Жыл бұрын

@@vladtheimpala5532 Now's the time.

@loren3964

11 ай бұрын

I say give it 3 or 4 good vertical revolutions by the cord then lower it down to whack the ball. Don't forget to yell 'fore' in case the cord breaks and for christsakes keep your ankles back!

Actually worked better than I expected

Great , when I can't buy buffing pads or there not available, I'll do the cardboard thing. Find some , cut , glue , wait , trim ugh.

Ну да хорошая идея предумана зделал полировочный диск из картоны. Можно ещё лучше войлок или валенок круг вырезать и полеровать им. Это лучше чем картон.

@user-zd8er8pq1z

Жыл бұрын

Эти далбаебы не знают что такое валенки

@user-xi2tb6ut3w

Жыл бұрын

Полироль.

@user-zd8er8pq1z

Жыл бұрын

@@user-xi2tb6ut3w политура150гр с утра

@romanaskacinskas8040

Жыл бұрын

@@user-zd8er8pq1z Try raza v denj pered edoy ,no neee boljshe ;)

@user-zd8er8pq1z

Жыл бұрын

Ну не пепси же (печень жалко)!!