Grouper Glidebait Lure Making (Part 2)
Тәжірибелік нұсқаулар және стиль
Please join me for the second half of this step-by-step tutorial on how to make a DIY grouper glidebait. In Part 1 of creating this handmade fishing lure, we made our epic detailed wood carving, made a silicone mold, and cast a resin bait. Now we move on to ballasting, painting, and testing this custom lure. I was thrilled at the amazing natural movement and smooth action of this big bait. I hope you enjoy watching this video!
Making a Grouper Glidebait (Part 1): • Grouper Glidebait Lure...
Making Silicone Fin Sets: • Making Silicone Fin Se...
TOOLS, GEAR & MERCH (paid links)
www.zimmtexlures.com
MORE LURE MAKING VIDEOS
Making Wooden Glidebaits & Swimbaits: • Making Wooden Glide Ba...
Making Wooden Crankbaits & Jerkbaits: • Making Wooden Crankbai...
Making Wooden Poppers:
• Making Wooden Poppers ...
Wooden Lure Testing:
• Wooden Lure Testing by...
Skills & Techniques:
• Zimmtex Uploads
MORE CONTENT
Follow me on Instagram
/ zimmtex
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!
Пікірлер: 66
Thank you so much for the wonderful lesson, the film and the final result of a long work!
@zimmtex
Жыл бұрын
Glad you enjoyed it!
Great lure, as always. I watch Marling Baits as well, I can't tell who is more talented, but I noticed one thing: he makes fins from hard plastik, while you make it from soft material. And oh my gosh, it makes so much more sense for the fishing lure.
@zimmtex
6 ай бұрын
Thank you so much! I do also use polycarbonate fins from time to time, but I agree that these silicone fins make a lot of sense.
What defines a craftsman is how you approach a problem. Everyone encounters problems but a craftsman makes it look like there was never a problem in the end. May I suggest a product to try that I like a lot for bonding hard to glue items. Shoe Goo in the footwear section of Walmart. It's a liquid rubber type tough bond that's even works on shoes !
@zimmtex
Жыл бұрын
Thank you so much! I appreciate your support and suggestion. I will check it out.
Excellent video on lure making and problem solving thank you
@zimmtex
Жыл бұрын
Thank you, I appreciate you watching and commenting!
Wow!! Turned out amazing!!
@zimmtex
Жыл бұрын
Thank you, I'm glad you like it!
Wooow that looks great and yes sir you did a perfect job 😍
@zimmtex
Жыл бұрын
Thank you kindly!
Those colors ❤
@zimmtex
Жыл бұрын
Thanks, I appreciate it!
Absolutely astounding job! You’ve truly outdone yourself with this one! I’d love to see you make a pike swim bait, I’m certain you’d nail it🤘🏾
@zimmtex
Жыл бұрын
Thanks! Thats a great suggestion!
Happy to see this lure being finished. Love following through the problem solving and development processes, it is a fantastic learning opportunity. And I completely enjoy watching function testing of the lure in open water when it's complete. Your content is exactly what I hope for when searching for lure builds! Super job Zim!
@zimmtex
Жыл бұрын
Thank you very much for your kind words, I'm glad you enjoy it!
Wooooow! Good job 👍🏻👍🏻👍🏻👍🏻👍🏻
@zimmtex
Жыл бұрын
Thank you!
That's amazing
@zimmtex
Жыл бұрын
Thank you, I appreciate it!
So cool! Please make a Rat lure. My 9yr old son & I are wanting to make a couple for the river. Amazing work man
@zimmtex
9 ай бұрын
Thank you! I'll add it to my list!
looks really good. I enjoyed this build a lot keep up the good work!
@zimmtex
Жыл бұрын
Thanks, will do!
nice work
@zimmtex
Жыл бұрын
Thank you! Cheers!
It’s here yes
@zimmtex
Жыл бұрын
I hope you enjoy it!
@BOSN_BAITS
Жыл бұрын
@@zimmtex I did very much since the first drawing I knew this would be magnificent but it still blew my expectations out the water
As always, absolutely epic work 👌 and great effort in hiding that paint peel 👌 I think most people would have completely given up! But your level head and extreme level of patients paid off 👍👍👍👍
@zimmtex
Жыл бұрын
Thanks! I think almost anything can be fixed if you put your mind to it.
What an amazing video! I love what you did w the blue tape so you could spray the head, and it’s good to see I’m not the only one who can have paint peel randomly. 👊🏻😂. I’d love to paint one of those in a bass pattern!
@zimmtex
Жыл бұрын
Thanks so much! I've thought about a bass pattern actually.
Great vid, just found your channel while looking for videos on lure making! I'm trying to use putty with your silicone method since I'm using lead and tin and silicone has too low heat resistance. Keep it up and greetings from Finland :)
@zimmtex
11 ай бұрын
Thank you very much, I'm glad you enjoyed my video! Good luck to you on your lures!
Second to none mate, amazing lure. Ive had that dame issue in the past with the spak filler, so I use car body filler now. Not an issue since
@zimmtex
Жыл бұрын
Thanks, good tip! I'll be checking that out for sure!
Beautiful bait! Just a suggestion from me being a builder myself. The slight nosing down can fixed by a pin style hinge and adjusting the bottom screw eye out or the top one in. That's what makes the double hinge style hard and a little more unpredictable because once it's together you cant adjust or tune the glide. Regardless very nice and well put together glide!🤘
@zimmtex
Жыл бұрын
Thank you for watching and for sharing your expertise! I will have to give that a try sometime. I appreciate your support!
@ericneedham3136
Жыл бұрын
@@zimmtex absolutely! Again it looks beautiful!
@BOSN_BAITS
Жыл бұрын
Love the tip thank you
The work is good, an the detail repair is excellent, and all around attractive and functional fish 🎣as to the moisture could you place it in dehydration (food maker) to dry out moisture after wall repair compound is used
@zimmtex
Жыл бұрын
Thank you very much! I appreciate your tip and support!
I’m at work and still watching this lol! Like I said last video when should I send my address for a mold??
@zimmtex
Жыл бұрын
Thanks for watching! Don't get yourself in trouble at work! Ha!
@luredinbaits6748
Жыл бұрын
@@zimmtex it would be work it amazing video
@luredinbaits6748
Жыл бұрын
@@zimmtex worth*
Have you tried Bondo skim coat for the imperfections? Also are you placing any epoxy in the pilot holes or is coating the screw eye enough to get it done?
@zimmtex
Жыл бұрын
Have not tried bondo skim coat; I'll have to look into that. I just coat the screw eye. I made a video testing the pullout strength you might find interesting: kzread.info/dash/bejne/lp-Is8Onp8vUhZM.html
@labtrainer09
Жыл бұрын
@@zimmtex Hey, Mike. I was going to suggest Bondo, as well, and for the last year, I have used it exclusively both for repairs and for filling my weight holes. Mikko at SolarBaits does the same. Both of us concluded that super glue, whether mixed with baking soda or not, is just too difficult and time consuming to sand and shape. Trust me, and try the Bondo; I think you'll love everything about it except the odor (which, fortunately, isn't terribly toxic). One caveat: a single drop of catalyst goes a LONG way. In the beginning, my batches were "kicking" much too fast! Best, Chris (in Maine).
@zimmtex
11 ай бұрын
Thank you for your input on this. While I've used Bondo before, I haven't used it for a skim coat. I did have problems with it setting up really fast but maybe I should try backing off on the catalyst as you suggested. I do still like baking soda and Instacure for structural fixes, but I agree it is not the only answer. Thanks!
Big greetings master, I would like to ask you if you can make a bait for river fish Huco-Huco, I myself make baits and I would make them according to your video. Thank you very much.
@zimmtex
11 ай бұрын
Hello and thanks for stopping by! I have a couple of older videos that might work for a Huco-Huco: kzread.info/dash/bejne/i4ZorZKGmcjblrg.html kzread.info/dash/bejne/ZGqNw8Z6f7mohso.html I'm also thinking about maybe making a 3-piece lipless version of this lure: kzread.info/dash/bejne/fa56w9F6kr3HaZc.html
@latohandmadelures7577
11 ай бұрын
@@zimmtex Thank you very much for your answer and great videos, I will definitely make these lures from your videos. Thanks again and good luck in your future work.
Bom dia amigo que tipo de arame você usa para fazer os pistões
@zimmtex
Жыл бұрын
Good morning! I used stainless steel lock wire.
materials are resin and microballoons?
@zimmtex
7 ай бұрын
Correct, thanks for watching!
😃😃👍👍👍👍👍💪💪💪💪💯💯💯💯💯🤝🤝🤝🤝👏👏👏👏👏👏🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦
@zimmtex
Жыл бұрын
Many thanks!
What’s swimming in your test tank?
@zimmtex
Жыл бұрын
Just a grouper :) I store it empty and put new water in it when I need it. Keeps things from growing in it.
I have an idea for a lure. Would you be able to make a mold for me? I’ll pay for it.
@zimmtex
Жыл бұрын
Thanks for reaching out to me! Unfortunately, I am not currently able to take orders or requests. I appreciate your interest and support!