Probably the most amazing paint job I've ever witnessed! And it has to be a pretty good looking one before I even choose to take time to watch a paint-one video. Definitely worth the view!

@zimmtex

Жыл бұрын

Thank you for watching, I'm glad you found it interesting!

Wow, you gotta be a surgeon, minister someone who has a lot of patience!!! 😵‍💫 That paint job is unreal! You have such a talent. My eyes would go buggy to do that many dots. What a great and unique looking lure! Thank you for posting this. 👍🏻🇨🇦🎣

@zimmtex

Жыл бұрын

Thank you very much for watching and for commenting, I really appreciate your support!

Your Passion for the art is apparent in every single piece you do. Keep at it, cant wait to see whats next.

@zimmtex

Жыл бұрын

Thank you very much for your kind words!

Mate that's absolutely stunning, the details mesmerizing. Just adore your work so much man..

@zimmtex

Жыл бұрын

Thank you so much, I don't know what to say except thank you!

Wow, that's one extraordinary bait. Thank for this video, loved it!

@zimmtex

Жыл бұрын

Thank you very much, I appreciate you watching and commenting!

Spot On! I admire your patience. Great job sir! Impressed.

@zimmtex

Жыл бұрын

Thanks, I'm glad you enjoyed it!

Thank you Watching from Indonesia,,, 🇮🇩

@zimmtex

Жыл бұрын

Welcome, glad to have you here!

Very nice mate…. A real show piece 🤙🏼

@zimmtex

Жыл бұрын

Thanks so much!

The level of detail you go to is unmatched by any other lure maker I've ever seen🤯 absolutely amazing work 👌👍♥️

@zimmtex

Жыл бұрын

Thank you very much for your support and for commenting, I really appreciate it!

That is unreal!! Man i envy your talent haha

@zimmtex

Жыл бұрын

Thanks, I appreciate it!

Amazing it's the art!!

@zimmtex

10 ай бұрын

Thank you!

Beautiful.🤟👏

@zimmtex

Жыл бұрын

Thank you! Cheers!

That's amazing!!

@zimmtex

Жыл бұрын

Thank you very much!

It's incredible, after all the sanding for what seems like forever, and achieving a near perfect shape and surface... the first base coat of paint reveals everything that was missed or needs more attention! I've been experiencing a lot of problems with the 4012 reducer. If too much is used with certain Createx paints, it causes the paint to coagulate/seize and clog the nozzle. I found that they now recommend 4011, because 4012 it too "hot". 4012 can be thinned with water to be use in problematic paints so that it's not too strong. I always take the needle out the nozzle end of the brush so as to not pull any paint back towards the trigger mechanism. Two questions: How many dots? & How many hours? I am utterly amazed and completely in awe by that paint job! Stunning!!!

@zimmtex

Жыл бұрын

I haven't had any problems with this reducer so far, but I'll pick up some 4011 the next time I need some for comparison. I appreciate your input! I honestly don't know how many dots, but I did spend 27 hours painting this lure. Not economical at all, but I just really wanted to do it. Thanks for watching!

Awesome 👏👏👏👏

@zimmtex

11 ай бұрын

Thank you!

Ratio for reducer to paint is usually 1 to 1 and if you take the nose cone off it reduces tip dry and you can do finer lines with it just lower the air pressure down to about 20 psi

@zimmtex

Жыл бұрын

Thanks for the info, I will give that a try in my next project! I really appreciate it!

Πολύ ωραίο!!! απίστευτο !!! ευχαριστώ.

@zimmtex

Жыл бұрын

Many thanks!

I won't be fishing with this pretty lure, can't even imagine the heart break if I lost something like this.

@zimmtex

Жыл бұрын

I appreciate your support and thank you for watching!

You should make an Arctic char swim bait.

@zimmtex

Жыл бұрын

Thanks, I will add it to the list!

Not sure if you know this, but that nut that locks the needle in place on the back of the air brush.....you can just break that loose with a couple of turns. You don't have to remove it completely. I've lost so many of those little locking nuts taking them all the way off.

@zimmtex

Жыл бұрын

I guess I didn't realize that, thank you for the tip! I've been lucky so far and haven't lost any parts.

👍👍👍👍👍

@zimmtex

Жыл бұрын

Thanks!

Beautiful paintjob as always. One of my biggest issue with airbrushing is the initial primer/ white layer, of which i always seem to need like 100 layers to fully hide the ballast holes. But i suppose apart from an aerosol primer, there is little you can do?

@zimmtex

Жыл бұрын

Thanks! You could try using a little bit of drywall spackle to fill those small inperfections; Let it dry and sand it down with fine sandpaper, then put another layer of paint over it. You could also pick up a can of automotive primer with a filler in it. It's a high build primer made for car scratches that you can sand down.

30 psi is way to much air for that Iwata Eclipse. I spray anywhere between 11 and 17 psi. If I'm covering a lot of area I go up to 25 psi.

@zimmtex

Жыл бұрын

To be honest, I'm fairly new to airbrushing, and am self-taught. The manual reccomended 25-55 psi, so I've been working with 30 psi with pretty good results. I will definately try out a lower psi to see what that's like. Thanks for watching and sharing your experience.

What a great video ! I have a question : when I put scotch on my lures I "scratch" off (i dont know the correct world) do you know a solution to this ?

@zimmtex

Жыл бұрын

Sometimes the tape does pull off paint. Make sure each layer is completely dry. Also, I paint two layers of Kamar varnish over everything before I tape it, which I think helps.

@antonvanmessem10

Жыл бұрын

@@zimmtex oh yes I forgetted the kamar varnish thank you a lot !

request realistic fish paint

@zimmtex

Жыл бұрын

Thanks for your request and for watching!

awesome paint job...ruined by the tail

@zimmtex

Жыл бұрын

Well, I'm glad you watched my video.

it looks like it could be venomous

@zimmtex

Жыл бұрын

It does doesn't it!