Glitter HTV (Heat Transfer Vinyl) Pressed onto Paint
Тәжірибелік нұсқаулар және стиль
I’ve been nervous about trying this because Glitter HTV backing or the carrier sheet is very very sticky and gets more so when heated - I was sure it would lift the spray paint right off. Turns out I was wrong! Yay for being wrong 🥳😅 I’ve done various experiments in the past to test using a heat press to apply glitter HTV (Heat Transfer Vinyl) onto a tumbler. And because of that, I hadn't tried it... yet! So it's finally time to see if that's a legit concern, or if you can press glitter HTV onto a spray painted tumbler, then remove that really sticky backing without ruining the paint job in the process.
Buy my tumblers here:
www.etsy.com/shop/LuxindaSwirl
and
Buy my tumblers in my Facebook group:
/ luxinda
Buy Luxinda MERCH here: bit.ly/3WLCYgy
=====Ways to help and support my channel or any other KZreadr's channel=====
==Like a video, share a video, subscribe to the channel
==The "Super Thanks" button directly underneath the video (where the like 👍 is, then to the right -- look for the 🤍 with a $ in it) allows you to directly support your favorite KZread Creators.
==Become a valued member of my channel by clicking the JOIN button just below the video (no obligation at all!)
==www.buymeacoffee.com/LuxindaS...
My Amazon Storefront*:
www.amazon.com/shop/luxindasw...
MATERIALS USED IN THIS VIDEO*:
KS Resin Liquid Stone Ultra UV: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
MAKERFLO 20-oz skinny tumblers: bit.ly/3FJsIyR
Rustoleum 2X matte spray paint: amzn.to/3HsU1yF
MEFINE glitter HTV: amzn.to/3v2yJ5n
HitPrex portable tumbler press: amzn.to/3Rql2XK
Dragon art: bit.ly/3RkSyPr
504 glitter: bit.ly/3A1AIdB
==Other Materials I prefer*, with Discount Codes:
WOODES GOODIES, 10% discount on most items use code "Luxinda":
www.woodesgoodies.com/
MAKERFLO tumblers: bit.ly/3FJsIyR
NEATO printable vinyl: bit.ly/3lHM9hw
T-REX alcohol inks: bit.ly/3J7hODc
FOILS & adhesive: bit.ly/3o4AwDJ 10%Discount "Luxinda"
APS FOIL CLUB link here: bit.ly/3WMyCq3
ZURI silicone molds: bit.ly/3w84kSZ
A-Sub sublimation paper: bit.ly/3fdO8uw
Koala products: bit.ly/3dQXwUM (code "luxinda")
Hiipoo waterslide paper: bit.ly/3quMCaR 10% code "LUXSWIRL"
or on Amazon: amzn.to/348G6hz
Hiipoo sublimation paper: amzn.to/3R3jOAy 10% code "LUXSWIRL"
Hiipoo sublimation ink: amzn.to/3C9ri0J 10% code: 4JEC46CV
* As an Amazon Associate I earn a small commission from qualifying purchases, at no extra cost to you.
#dragontumbler #glitterhtv #tumblerpress #glittertumbler
Luxinda (Cindy) Deskins
PO Box 974
Ranson, WV 25438-4974
Lux.Tumblers@gmail.com
** Efforts I Strongly Believe In **
Getting plastic out of our oceans -- teamseas.org/
Emergency food relief -- wck.org/
Music in this video:
Пікірлер: 92
So dare I try a full wrap version??
@Studio190creations
Жыл бұрын
I was thinking this good be great with 1 of those crazy wrap templates.
@martivanhoy28
Жыл бұрын
Yes please do a full wrap!! That turned out amazing!
@emilydunham4735
Жыл бұрын
Absolutely
@jodipeterson6581
Жыл бұрын
👍🏼
@CrystalWilliams-rt3zm
Жыл бұрын
Absolutely do a Full wrap
I gotta say, I love the dragons and the black background! Turned out perfect!
@Luxinda
Жыл бұрын
Thank you!!🐉😊
Absolutely love the dragons!!! This cup is amazing ❤
@Luxinda
Жыл бұрын
Thank you!!🐉😊🥰
Oh wow!!! The possibilities are endless doing it this way!!! Thank you for sharing!!!
@Luxinda
Жыл бұрын
Thank you!! Glad it was informative 😊😊
Ohhhhh I love dragons! It turned out so gorgeous! Learned something new and love the result. ❤ Great job Thank you for sharing as always. 👍
@Luxinda
Жыл бұрын
Thank you very much!!😊😊
My son would love that cup!! He has always loved dragons!!
@Luxinda
Жыл бұрын
Dragons are wonderful 🐉🐉😊
absolutely gorgeous !! I love 💕 the dragons on the black cup. Fantastic just fantastic tumbler. Thank you
@Luxinda
Жыл бұрын
Thank you!! 😊🐉✨
That’s a pretty awesome cup! Turned out fantastic Cindy!
@Luxinda
Жыл бұрын
Thank you!!😊🐉😊
This came out absolutely gorgeous Cindy! 😍 Full wrap would be interesting. Love the dragons
@Luxinda
Жыл бұрын
Thanks very much, Gail!! 😊😊
@Mamas-Madhouse-Creations
Жыл бұрын
@@Luxinda you're very welcome Cindy 😊 ☺
That Dragon Tumbler Turned Out AWESOME !!! I Absolutely LOVE IT !!!! I Want To TryOne Just Like That. You Make It Look So Easy !! Just Found Your Channel And I'm Glad I Did ... You Now Have A New Subscriber !!! Thank You
@Luxinda
Жыл бұрын
Thank you so much 😀 Welcome to the channel!!
That came out really pretty. I recently did a wood burnt dragon piece that is glittery and glows in the dark.
@Luxinda
Жыл бұрын
Thank you! Oooh, sounds beautiful 🤩
Ooooo LOVE 🐉 that’s gorgeous 😍 thank you for experimenting. And I think a full wrap would be amazing too ❤awesome job 👏🏽 stay blessed love 🥰
@Luxinda
Жыл бұрын
Thank you!!!😊
That is so gorgeous!! I happen to love dragons, and my high school mascot was a dragon.
@Luxinda
Жыл бұрын
Thank you!! Dragons are pretty awesome 🐉🐉😁
This is STUNNING!!!!!.. love love love it.
@Luxinda
Жыл бұрын
Thank you very much!!😊😊🐉✨
Absolutely gorgeous!
@Luxinda
Жыл бұрын
Thank you!!🐉✨😊
Love this tumbler!
@Luxinda
Жыл бұрын
Thanks!!😊
Love this can't wait to do this for sure ! Thank you
@Luxinda
Жыл бұрын
Thank you!! Have fun!😊🐉✨
Love this. Great job.
@Luxinda
Жыл бұрын
Thank you!!😊🐉
Absolutely stunning and beautiful ❤️❤️❤️
@Luxinda
Жыл бұрын
Thank you!!😊
Absolutely stunning
@Luxinda
Жыл бұрын
Thank you!!😊😊
Fantastic and another Fabulous Technique for toolbox. Awesome Cindy!!
@Luxinda
Жыл бұрын
Thank you!!😊😊
absolutely stunning!!!!!!!!!!!!
@Luxinda
Жыл бұрын
Thanks very much!!😊🐉
That came out amazing. Absolutely gorgeous.
@Luxinda
Жыл бұрын
Thanks very much!😊🐉😊
Absolutely gorgeous thank you for sharing👏👏👏
@Luxinda
Жыл бұрын
Thank you!!😊😊
Love this tumbler. You are so creative. Thank you for such awesome tutorials 😍
@Luxinda
Жыл бұрын
Thanks so much!!😊
Very cool! Thanks Cindy 👏😊👍
@Luxinda
Жыл бұрын
Thanks for watching!😊🐉
Oh that is sooooo cool!! I love it!!
@Luxinda
Жыл бұрын
Thank you!!😊🐉😊
Oh Cindy This Cup turned out Absolutely Gorgeous I’m going to try this on a cup I messed up and hopefully mine will turn out beautiful as well Thank You For Doing This
@Luxinda
Жыл бұрын
Thank you!!! Hope it turns out great! 😊🐉
Beautiful thank you for sharing 😍
@Luxinda
Жыл бұрын
Thank you!!😊🐉
Love absolutely love!!!!
@Luxinda
Жыл бұрын
Thank you so much!😊🐉
That turned out amazing love the dragons
@Luxinda
Жыл бұрын
Thank you!!😊😊🐉
Looks great glad it didn't lift the paint good to know!
@Luxinda
Жыл бұрын
Thanks! Yes, I was very happy that worked!!
Very cool!!
@Luxinda
Жыл бұрын
Thanks!!😊😊
Thanks!
@Luxinda
Жыл бұрын
Thank you!!😊
Very cool 😎
@Luxinda
Жыл бұрын
Thank you!!😊🐉
I wonder if you could use heat spray paint like the kind used for engines and grills if that would change the wait time. I love the silver dragon. It would be a nice butterfly or skull rose cup also. Great inspiration again!!
@Luxinda
Жыл бұрын
It probably would shorten the time some. The last video where I opted *not* to press onto a spray painted tumbler because the backing is SO sticky after pressing, a number of viewers suggested using the high-heat grill paint. I was going to try that but realized it would be limiting for a lot of people, especially anyone who wanted backgrounds other than black. So I decided to try just waiting instead like I did here. This way you know that any spray paint color should work 😊
What kind of resin do you use for your tumblers? Which one is your favorite? You always make such beautiful tumblers!
@Luxinda
11 ай бұрын
Thank you!! I’ve tried a lot of different resins, and the brand I prefer is KS Resin. I use their Liquid Stone the most and to a lesser extent their Art Resin bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount) I also recently discovered a really nice all-purpose resin that’s quite inexpensive, from Honest Epoxy Resin (they sell on Etsy) Honest Epoxy Resin Clear Guard: ($5 off with code: luxinda) bit.ly/3LMhRr1
Very Awesome.. who makes the 504 glitter....? Hugs Sheryl 💙🎨💙
@Luxinda
Жыл бұрын
Thank you!!! That glitter is from Mr. Nola's. Here's a link to it: bit.ly/3A1AIdB
Absolutely love this but I am partial to dragon's. 😁
@Luxinda
Жыл бұрын
Thank you! 😊😊🐉✨
I don’t have a cup press. Do you think a regular clothes iron would work?
@Luxinda
Жыл бұрын
It should, just make sure you’re applying heat all over the htv area. I’ve even seen some tumbler makers apply htv with just a heat gun (although it seemed very fiddly). I would just suggest you do a small test with your iron and see how it works.