The absolute best tutorial on the web.... well done old chap..

@sub12airgunners

15 күн бұрын

thank you for watching 😀

Thanks for the AMP reg re-build video, very good step by step info. The Impact is still something i need to own .....

I'm learning a shit load from your videos. Bloody marvellous.

@sub12airgunners

9 ай бұрын

really glad they are useful 👍😀

Thanks for the chat at the shooting show on Crawley guns stand ref regulator,saw your video that was very helpful getting the large ⭕ ring out was the hardest part of the job 👍

@sub12airgunners

4 ай бұрын

it was nice to talk to you 😀

Cheers Jeff/Jake, I have got my 3M paper, just waiting for my O ring kit, removal tool and witches hat, then I will be polishing the little bu88er. Thanks for a great video.

Brilliant video pal my impact is leaking and the new seals just arrived. Going to attempt this and save me some pounds. Thank you very much 😁👍👍👍👍👍

@sub12airgunners

3 жыл бұрын

No problem mate. Good Luck 👍

I love that tool and the piston puller made my life so much better

@sub12airgunners

Жыл бұрын

Nice one👍 they do make life a bit easer

Another great video fella (even I could follow those instructions 😛) 👍🏼 I do feel you may have made a rod for your own back by showing people your custom tool-set there though 😉

@sub12airgunners

3 жыл бұрын

Thanks (you give yourself too little credit), I am not too worried though, I would rather the information be out there, and if it helps someone out then why not. Thanks for watching. 👍

Another great video - explained well. 👍

@sub12airgunners

3 жыл бұрын

Thanks, much appreciated. 👍

What a fantastic instructual video..im AMAZED! I can't think ive ever seen one better..im going to purchase an FX. so ill have to put this in my favourites..ill subscribe as well..thank you TOP MAN!

@sub12airgunners

Жыл бұрын

Glad you liked it, thanks for watching 👍

Great video with all details and nice tips. 👌👌

@sub12airgunners

3 жыл бұрын

Thanks for watching. 👍

Great video on this matter buddy 😎 thanks for the video not got inpact but find it very useful enyway

@sub12airgunners

3 жыл бұрын

Good to hear, even if you don't have an impact all the info should be somewhat transferable to other rifles, theres not much difference in how they operate, but good to know you enjoyed it.

Excellent video, the best I have seen on this topic. Many thanks.

@sub12airgunners

6 ай бұрын

thank you 👍

high quality tutorial. Impressive. thanks for sharing

@sub12airgunners

3 жыл бұрын

Glad you liked it!

Very well explained!👍

@sub12airgunners

2 жыл бұрын

Glad it was helpful!

Hi everyone I posted a few seal and tool kits on Ebay. link below or search for FX Impact/ crown AMP O Ring kit on Ebay. www.ebay.co.uk/itm/FX-Impact-Crown-AMP-REG-O-RING-KIT-WITH-TOOLS/373512063114?hash=item56f70dc88a:g:J5EAAOSwNwpgWKA7

Excellent video young man and very helpful. can you help me with a problem with my fx impact mk2, regulator pressure is set at approx 55 bar, but after a shot it can take approx 30 plus seconds to get back to that pressure, any help would be much appreciated. thank you Tim.

great video

@sub12airgunners

Жыл бұрын

Thanks!

Nice vid mate.. I just bought a brand new fx maverick 3 days ago and it’s shooting at 10.5 lbs not happy I’ve sent it back to my local R f D to sort it out I was wondering what might be the cause anyway I’ll let you know the outcome..brilliantly explained video.

@sub12airgunners

3 жыл бұрын

My Maverick came through at about 10.8 lb/ft, and I don't think there is anything wrong, it may just be the importer setting the power on the low side to be safe. Your RFD should be able to sort it though, the hammer spring just needs adjusting up a little. But let us know what happens. Thanks for watching.

@grantbennett9879

3 жыл бұрын

Andy, Which pellets did you use to test the ft lbs?

Wow nice video, thanks buddy

@sub12airgunners

3 жыл бұрын

Glad you liked it

another great vid , Can I ask a quick question ? ... My impact is getting a fps spread of around 19.7 - 16.4 per mag this seems a bit much to me, wondered what your thoughts on that , thanks ..

I installed a brass piston for my M3 and made a world of a difference. Zero creep and just amazed how well it works now. Standard deviation is 2 fps now and could never get that with the polymer piston. By chance do you sell brass pistons and if so I can I get a few? I can’t recall where I got the last one but I have two other impacts I want to upgrade. Great video and helped me upgrade my regulator. Thx!

@marcevens5472

Жыл бұрын

where can I get the brass piston from please

Wow! Amazing. I have a huntsman classic that’s leaking would you consider fixing and tuning the rifle for me.

Hey pal. awesome video. Think I may service my 3yr old AMP, never given me a problem but feel the urge. The dry powder, is that same as graphite lock powder? If not, do you have the name & where to get it from. Cheers

Very good video as usual. What brand of dry lube is a good one for the washer stack

@aczdc69

2 жыл бұрын

the bottle he displayed is sold from TW Chambers £5.56 CN002 Molybdenum Disulphide Powder

Can You tell, after how many shots the AMP reg needs rebuild? I have a Dreamline, bottle version. I've shot probably 2000-2500 shots, but now the speeds are very inconsistent. Last string was 23 shots with extreme spread of 40fps. For example, if I start the string then first 4 shots will be with ES about 2-4 fps and then the 5th shot is like 20-25fps lower. Couple of shots on that lower speed and then jumps up to higher speed. Like every couple of shots changes speed for about 20 or so fps. Smells like reg rebuild?

Hi, Great video and informative. Which way should that top Belville washer be seated when its put back in to the regulator. It came out as I removed the regulator to replace the leaking seals, and now not quite sure if it has to go back in a specific way. FX Maverick by the way Thanks

@sub12airgunners

2 жыл бұрын

()()()()()( is the normal stack with the final washer facing up towards the brass reg body. Thanks for watching

Need a wildcat mk2 vid J. So I can learn to service and tune mine myself.

What size bell washers are in the fac and if put in a sub 12 will it once recalibrated to 12 would it run better thanks love your Chanel fantastic information

@sub12airgunners

2 жыл бұрын

FAC bellevilles are between 0.5 and 0.6mm thick, for sub 12 you don't want the FAC bellevilles in the reg it just makes it much harder to get the reg pressure low enough, and you have very little adjust ability below 100bar. Thanks for watching

Hi Jeff just out of curiosity would you mind doing a short video on tweaking the fx maverick hammer adjuster ... many thanks andy.

@sub12airgunners

3 жыл бұрын

Hi Andy, yeah no problem, been having a little fiddle with the maverick so ill post a vid in the next couple of days. Thanks for watching. 👍

Great video. I was just wondering were you got the brass piston from. It also looked like you had a thin peace of delin on the end to stop metal to metal contact with the adjustment screw. Would I be able to purchase one of these from somewhere. Thanks

@sub12airgunners

3 жыл бұрын

I made this one but I don't sell them, they don't really give any upgrade over the standard delrin piston. Thanks for watching.

@user-nv4us2ib2f

3 жыл бұрын

@@sub12airgunners Good afternoon. Do you have a video about how you made such a piston with derlin?

if i put my ear on the power wheel, i hear a very small hiss inside the reg/receiver! cant figure it out what is the issue! air coming out in a full day!

Very useful video thank you so much I noticed this regulator has no spring could you give reason ?

@sub12airgunners

3 жыл бұрын

Hi, the belleville washers (commonly known as spring washers) act as the spring they are the small grey discs seen at 24:04 . Thanks for watching.

where might I be able to purchase the reg piston removal tool?

Yes this is the one I used to fix mine 👍

@sub12airgunners

7 ай бұрын

i am glad it helped😀 you situation is why we started doing these vids in the first place so it's great that they are working 😀

@airhunteruk

7 ай бұрын

@@sub12airgunners 100 percent buddy thanks again because without you’re video I wouldn’t have tackled it 👍

Morning Great video, quick question , I have the fx red limited edition but it's only the block that's red...and would love to have the back part red aswell, but I can't find the colour ral number, would you happen to know this. Much appreciated

@sub12airgunners

3 жыл бұрын

Hi not sure on the RAL number they are anodized, not painted I believe, so getting a color match may be a bit difficult, you may be able to have it matched by a paint shop though. But I have no idea on the RAL number sorry. Thanks for watching.

Hi, as the previous comment said it was nice to meet at the show and put a face to the hands, Ido have a couple of questions though would you mind telling me what the grip you have on the rifle and where you got it and then would it be ok to polish the end of the adjuster screw and piston with autosol ?

@sub12airgunners

4 ай бұрын

hi yes nice to meet you to it's an ergo chubby grip from air gun 101 shop👍 i would not use autosol unless you can make very sure you can clean all the residue when your finished 😀

@PaulSmith-jr1qe

4 ай бұрын

Thanks for that.@@sub12airgunners

Hello sir great video where can I buy the witch hat thanks

Hi great video but ive got ask who did the red on your rifle as its not factory from the look of it and how was it applied and what is the finish did the rifle need a complete strip down cheers.

@sub12airgunners

3 жыл бұрын

Hi, Its type 2 anodizing with red dye and I did it myself, the rifle needs to be fully gutted and to be honest its a pain to do. look up anodizing on KZread and you will get an idea of whats involved. Thanks for watching. 👍

@waynepeacock4359

3 жыл бұрын

@@sub12airgunners Thank you for reply will do

Hi great video where can you get the tool to remove the piston and the witches hat thank

@sub12airgunners

3 жыл бұрын

Hi, A couple of people have asked for the tools so what ill do is make a few and stick them on Ebay. ill post the link here when they are ready so keep an eye out. Thanks for watching. 👍

Hi. Is the AMP reg of fx is all the same, as i have a Maverick. Thanks

What is wrong if I set the pressure at 55 and in the morning it as gone up to 65? Great video by the thankyou

@sub12airgunners

3 жыл бұрын

The reg sounds like its creeping, it the top of the piston damaged? a small amount of creep is normal (1-2 bar)but 10 bar sounds excessive, also are you sure its not the gauge settling down, some of the analog gauges take time to settle down and start reading correctly. Thanks for watching.

Hi was just wondering if your going to put more of These tools on eBay again as I missed the last one many thanks

@sub12airgunners

3 жыл бұрын

Yep a couple more on Ebay now. Thanks for watching 👍

Do you have an online shop? I need a regulator brass body for my FX Impact MK1, old shape

my piston has + on the end ...is this right......

you have lots of aftermarket bits on that impact, left hand cocking, cocking handle, trigger, who does them 👍

@sub12airgunners

3 жыл бұрын

Hi, I made it all, Bagnall and Kirkwood sell one of my cocking handles if you interested look on their site for A14 extended cocking lever. The other stuff was made over the time just for a bit of fun.

Hi there, I’m interested to know more about your modified brass/Delrin piston. Can you give me more detail on this please as I’m going to make one for my Impact. How you made the holes for the air ways etc Cheers buddy

@sub12airgunners

3 жыл бұрын

Hi, its just a copy of the original Delrin piston in brass with a small Delrin plug pressed in the end. The holes are the same size and it was made on my lathe and mill. Thanks for watching. 👍

@precisionairguns5553

3 жыл бұрын

@@sub12airgunners I’m just interested how you made the hole through the Delrin seat into the centre of the piston, did you drill a 45 deg hole etc

man that gun looks very nice love the color 😍and that trigger looks cool 😎 I ordered some parts from fx usa and they sent me a brass piston I think that's the new one and some Bellville washer as well they sent me 14 washer and there's two that are .55mm and then I have like 6 that are .45mm then the rest of them are .38 mm I noticed that you only have ten in your reg mine had 11 like this ()()()()()( one washers face up to the adjustment screw

@sub12airgunners

2 жыл бұрын

Thanks, yep brass pistons starting to come through now, try with the standard stack first, the thicker belvilles only allow you to get higher reg pressures you may be able to leave off the 11th one and use 10 it will give you a finer adjustment at our reg pressures. Thanks for watching

@chrisfigueroa3361

2 жыл бұрын

@@sub12airgunners thanks 😊 for the info

Hello what kind of tool you used to pool the little piston? Is it available somewhere?

@sub12airgunners

3 жыл бұрын

Hi yeah I sell them on eBay, with a set of the reg O rings. link below. www.ebay.co.uk/itm/373613551298?hash=item56fd1a5ec2:g:J5EAAOSwNwpgWKA7

@AlexSanchez-le7bh

3 жыл бұрын

@@sub12airgunners thank you very much unfortunately they are for sale only in UK, and they don’t ship them to USA . Can sell me one?

In reply to the 10.5 ft lbs question I used jsb 8.44 and fx 8.44 using fx chronograph I put through 15 pellets weighed of each brand.... it might just need tweaking a bit but I ain’t got the guts to mess about with it.

@jeffhello1444

3 жыл бұрын

If you try it with 10.34 you will find you will be around the 11 ftlb mark 👍

@andydowden8117

3 жыл бұрын

@@jeffhello1444 thanks Jeff it may be on its way to sportsman gun centre to have a look at... however when it comes back I will try 10.34... many thanks

@grantbennett9879

3 жыл бұрын

Jeff is spot on, hence my question regards the pellets. I was getting 10.8 ft lbs with AADF and JSB when the gun arrived. With the 10.34 heavies it was putting out 11.3. I've tweaked the hammer spring adjuster slightly now and get 11.6 ft lbs with the heavies, and 11.2 with any 8.44 pellet. The shot to shot consistency with the heavies is better in my rifle. Shot a 10 shot string this morning with spread of 4 fps and std dev of 1.2. Thought that was a fluke so tried again and got exactly the same result. I find with the 8.44 there is a little more spread, although that is still only 9 fps with a std dev of 3, so still amazing. The other thing is you need to shoot probably 150 shots through the rifle before testing. The regulators need some time to bed in. I've put more than a tin through mine now and it is amazing. Enjoy it when you get it back.

@andydowden8117

3 жыл бұрын

@@grantbennett9879 thanks grant it’s probably me worrying over something which may be something not to worry about... I was probably expecting it to be at least 11.6 out of the box and when the chronograph said 10.5/6 it got me thinking for a rifle of this much money it should be 11.6 out the box.. anyway we’ll see what happens I myself don’t want to adjust anything in case I bugger it up just don’t have the guts lol.

@jeffhello1444

3 жыл бұрын

@@andydowden8117 Yes 11.6 out of the box is a tricky one, lots of people use 8.44 if you set a rifle to 11.6 with 8.44 it will be over the 12 with 10.34 and if you set it to 11.6 with 10.34 it the seems low with 8.44 so it is bit tricky for the RFD, it's the stupid law

From where i can buy these tools? like Oring cone and piston remover

@sub12airgunners

3 жыл бұрын

I sell them on eBay, link below. Thanks for watching. www.ebay.co.uk/itm/373613551298?hash=item56fd1a5ec2:g:J5EAAOSwNwpgWKA7

Hi Love ❤️ the video I was wondering if you do them for a fee as I think 🤔 I would end up making mine worse Shaky hands 🙌🏻

@sub12airgunners

2 жыл бұрын

Thanks, but we can't work on other peoples rifles unfortunately, we don't have an RFD licence so we can't take rifles in. Thanks for watching though and its not as hard as it looks. Thanks for watching.

Do you service and tune Fx mk2 impacts ???

@sub12airgunners

6 ай бұрын

hi no sorry we don't work on peoples guns

Hi, great video. I checked the link for ebay but I think it's expired. I'm after a kit & piston removal tool but can't find the tool.

@sub12airgunners

Жыл бұрын

try sub 12 airgunners that should bring it up 👍

@garzy55

Жыл бұрын

Thank you now bought and paid for.

Csn I ask where you get the tools ie the witches hat and piston remover please

@jeffhello1444

3 жыл бұрын

There is some on ebay at the moment

@sub12airgunners

3 жыл бұрын

Hi I made another couple for Ebay, but they are selling faster then I can make them at the moment, one left though; www.ebay.co.uk/itm/FX-Impact-Crown-AMP-REG-O-RING-KIT-WITH-TOOLS/373512063114?hash=item56f70dc88a:g:J5EAAOSwNwpgWKA7

Hi where can I purchase one of those piston removal tool

@sub12airgunners

3 жыл бұрын

Hi, A couple of people have asked for the tools so what ill do is make a few and stick them on ebay. ill post the link here when they are ready so keep an eye out. Thanks for watching. 👍

@paulbennett7213

3 жыл бұрын

👍

dear friend!!! whear to buy reg piston?

@sub12airgunners

3 жыл бұрын

Hi I made it, but I don't sell them unfortunately. Thanks for watching.

If you made a tool to remove the regulator piston from inside the fx impact i would buy it 😊

@sub12airgunners

4 ай бұрын

we have been making and selling them for a few years now have a look on ebay 👍

I changed my body Reg O ring today, It was like doing a colonoscopy 🤣

Is that graphite lube?

@sub12airgunners

Жыл бұрын

Similar it's moly lube 👍

I use WS2 instead of MoS2.

how accurate do you find the fx gauges? do you set yours up with the fx one or a digital one thank's.

@sub12airgunners

3 жыл бұрын

They are a bit hit and miss, some gauges are very accurate and some are way off, I put Wiki gauges on this rifle just so I was confident what pressures I had in the rifle. Thanks for watching.

@andydowden8117

3 жыл бұрын

John what did you mean if it drops off the reg it might spike.!

@johnferrier5955

3 жыл бұрын

@@andydowden8117 if you shoot it down to 60 bar the power might rise up wards if the hammer spring is set up wrong, try it if it does it just needs the hammer spring backing off a little bit

@andydowden8117

3 жыл бұрын

Hi John thanks for that tip but I would never take it down to 60 bar that’s just me but thanks a lot.

@johnferrier5955

3 жыл бұрын

@@andydowden8117 ok

Hi​

@sub12airgunners

3 жыл бұрын

Hi, thanks for watching.

There is actually bugger all you don't know about airguns.

@sub12airgunners

9 ай бұрын

every day is a school day for us, but have picked up a fair bit over the years 😀