I have 40 years experience, you look Very young but with a lot of experience. Great work Boss

@TheValuablepainter

7 ай бұрын

Hi, That’s some Great numbers Yes I have 20 plus, started really Young with my Older brother and my Dad. Basically I’m 3rd Generation Painter 👨‍🎨 Thank You For watching

Very professional, shows the experience you have as a Painter! Great Job !

@TheValuablepainter

Жыл бұрын

Thank you Picazzo, going for 20 years. Came out Good 👍

Estos jóvenes muy trabajadores y lo que vale que el trabajo lo asen con amor y perfeto

@TheValuablepainter

2 жыл бұрын

Gracias María, así es, el trabajo lo hacemos con amor y la mucha experiencia que tenemos!

buen jale carnal! what size spray tip size did you use for priming and painting?

@TheValuablepainter

4 ай бұрын

Gracias carnal, doors Graco 3-11 & Walls Graco 4-15Tip Thank you 👑

Hola sir excellent video so you roll the walls after spraying. Maybe you said something about it when you said don’t over spray the ceiling. Keep up the good work

@TheValuablepainter

Жыл бұрын

Hey buddy, We spray everything With primer, Spray all ceilings for finish paint. Then we spray walls 1st coat walls and Backroll. Sprayer just spray walls not close by ceilings because they are finished. Last and final coat ( 2nd coat paint ) we brush and roll by hand. Thank You 🙏🏼

Looks really good man.

@TheValuablepainter

Жыл бұрын

Hey Champ, Yes came out really Nice. Thanks for watching and subscribing

Im a Painter here in Huntsville Tx. Hard to find work but i keep trying, any recommendations of where to get work at for being a Painter?. I absolutely enjoy your videos!!.

@TheValuablepainter

2 ай бұрын

Hey Buddy, appreciate you watching my ViDs. Best advice- advertising your skills your trade 🎨- social media, Craigslist , stoping by Paint stores- Sherwin-Williams- you see a lot of contractors their. Ask them for work Let’s Get it King 👑

Very clean work bro. Keep it up!

@TheValuablepainter

Жыл бұрын

Hey Buddy, much appreciated it, Thank You for watching and Subscribing king!

Stagger the doors with nailers on the top.. much easier I usually don’t finish coat any walls till the trims installed.. Overall nice job

@TheValuablepainter

8 ай бұрын

Hey Boss, I’ve seen that Technique, but I been doing Doors like this for years, no tools necessary, no time consuming, No spray hose tangle when spraying room. Probably for large counties of doors probably will work good. Here’s was only around 4 -6 doors Yes , trim should be finished first when is a Repaint, but on new construction works different, first comes the framers, then drywallers then painters , then trim guys Ect Here in my state CA Thank you buddy, And for watching and subscribing!

That’s wassup keep up the work 🔥

@TheValuablepainter

2 жыл бұрын

Thank You G, No paint No Gain!

You guys did a great job

@TheValuablepainter

2 жыл бұрын

Thank you Perrito!

Thank you for the videos; they are very helpful. What spray tip did you use for both the primer and the first coat of paint? I know you typically use Sherwin Williams. Is the Zinsser Bulls Eye 1-2-3 Primer worth the money, or should I stick to using Kliz PVA or Sherwin Williams PVA for new construction? Keep up the good work!"

@TheValuablepainter

6 ай бұрын

Hey buddy, Thank you for watching. Tip for walls 4-13 Black reversible Tip Tip for Doors 2-11 black reversible Tip PVA is specially for New Drywall, Kilz PVA high quality and Sherwin Williams also great primer. That bull eyes primer Super high quality too. On new construction jobs like here with New Drywall PVA primer is best. Pva primer is actually cheaper primer then all, it’s just for New drywall Thanks Again for subscribing 👑

The finish Product was Just Smooth!

@g1selleshunrgy

Жыл бұрын

Greatful for your ideas

@TheValuablepainter

Жыл бұрын

Glad you like it

Ok I see u guys nice job

@TheValuablepainter

2 жыл бұрын

We out here my G, 👨🏼‍🎨

So Spartawall is not good for spraying? Thanks for the video!

@TheValuablepainter

7 ай бұрын

Hey Boss, it’s Good . Mostly when you roll you get Runs ( drips ). Dunn Edwards paints I get that a lot You have to backroll and double check in a few to make sure it’s not Sagging

Horale great work great video thanks, muchas gracias por El video

@TheValuablepainter

Жыл бұрын

Gracias King 👑, yes came out Nice. Have another one coming up next. Thank you for Subscribing

@Chungi2020

Жыл бұрын

@@TheValuablepainter awesome looking forward to it im actually starting my own painting company I painted with my brother for 15 years plus and I decided to do my owm thing I was retired and that just aint for me but hey great work hermanito keep them coming

@TheValuablepainter

Жыл бұрын

That’s the only way to go Champ! Starting your own company- me entiendes. Small jobs to get started, Yes I will Thank you Again Buddy

The PVA was applied nicely, a good build-up of material, how many gallons of PVA was shot?

@TheValuablepainter

Жыл бұрын

Yes, that Kilz Pva highly recommended! Covers really Good! If I’m sure around 12-15g Pva Thank you 🙏🏼!

Good work g!

@TheValuablepainter

11 ай бұрын

Thank you My G, I have massive Full interior New Construction 🚧 video coming, in process Thanks again King 👑 for watching & subscribing

@ROOSTERpaintApplications

11 ай бұрын

@@TheValuablepainter nice I’ll check it out! I’m in the paint industry trying to start my own business I currently work for the oil fields spraying tanks Residential and commercial is what I’m chasing now Any info would be highly appreciated compa🙏🏻

Can you make a video of building and disarming the spray gun ? It’ll be extremely helpful Your spray gun sprays perfect

@TheValuablepainter

Жыл бұрын

Hey Boss, yes I will do . Got different type of Guns - Contractor and Contractor PC trying to get the Compact one. Big Tip for spraying smooth - keeping all filters clean after every used , Tip not blown, and pressure at perfect PSi Thank you buddy for watching and subscribing

@oaouda

5 ай бұрын

@@TheValuablepainter Thank you. You make it look so easy. How you handle spitting if it happens while you are spraying the door? Did you spray the casing for the doors? Thanks again and keep on the good work!!

@TheValuablepainter

5 ай бұрын

@@oaouda Hey buddy, Spits on doors or trim, Depending on what coat am I, primer usually just let it dry and then sand, Finish paint , I will get a 1/4 Rolling nap and dry roll, at the end of the jobs will normally go back and re-roll doors anyways specially on New Construction jobs Hopefully helps you

Good Job. Do you backroll the primer coat? Also do spray any of the finish wall coat? or cut in brush and roll all of the finish wall coats?

@TheValuablepainter

7 ай бұрын

Hey Buddy, Thank you! Came out clean. As you can see in the video, we spray Primer, Spray 1st coat of finish, & Backroll And 3rd coat We brush and roll, thats my process of doing NEW Construction jobs Thanks For subscribing & watching king 👑

@pjmisley

4 ай бұрын

Someone told me once that if you don't backroll primer into drywall it will fail eventually? I'm not criticizing you, I just wondered if you had ever heard anything like that? So many painters out there with so many DOs and Don't ya know? You do a great job, keep at it

@TheValuablepainter

4 ай бұрын

@@pjmisleyI’ve Done a lot of new construction jobs, never had a problem. What I do, let it sit for couple days before doing sanding or putting first coat of paint. Also companies I used to work they will do the same process Super big jobs I’m editing a new video New construction 30k job, 15 million dollar house New drywall Thank you king 👑 for watching and subscribing

Charge more boss! Nice work. How long start to finish?

@TheValuablepainter

9 ай бұрын

Hey Boss, you already seen it, i forward you vid. Took around 4-5 days to complete. Profit around $3.500-$4,000 with extras Yes, but when you have a General Contractor he gives you 30-40 jobs a Year you have to bring down price for about 15% Thank you 👑

Awesome Video this helped me a lot!! One question, I am curious when you spray on the PVA, do you need to backroll it as well or just spray it on without backrolling? Thank you I appreciate it

@TheValuablepainter

Жыл бұрын

Hey Buddy, not necessary. PVA primer sealer works for you by seal the pores on the new drywall. Means Polyvinyl acetate PVA But when applying paint is recommended, backroll for touching up and leveling smooth. Thanks for watching & Subscribing 👑

@brodybrubacher4850

11 ай бұрын

@@TheValuablepainter awesome thanks for replying I appreciate it!

How much labor and how much was materials ?

@TheValuablepainter

28 күн бұрын

Hey Boss, materials around $1,200. Supposed to be Sherwin-Williams paints but they change in the last minute to Dunn Edwards paints Labor around $4,700 - 4-5 days total It end up been little more with some Ad ons Thank you for subscribing 👑

Awesome job brother, do you work solo?

@TheValuablepainter

Жыл бұрын

Hey Buddy, Most of the time Yes. Solo. And we partner up in some jobs like this one. Thank you Sam!

Great job, what state are you located in?

@TheValuablepainter

Жыл бұрын

We Located in San Diego California. Thank you Dude! For watching my video & subscribing to the channel!

Nice work. How long you guys work that?

@TheValuablepainter

2 жыл бұрын

Thank You Carnal, That Job was about 5 day Job @ 2 painters. We did 3 days ceilings, walls & doors prime & 2 coats of paint. Then 2 days for baseboards & Casin putty caulking priming & painting. But for baseboards and Casin we had to wait 2 weeks for installation . Yes 5 days total

@TheValuablepainter

2 жыл бұрын

Thank You Carlos for Subscribing!

@marlonm95

Жыл бұрын

@@TheValuablepainter so it was 5900 just for the interior? or exterior too

@TheValuablepainter

Жыл бұрын

@@marlonm95 Hey Boss, yes was only Interior job $5,900 including Dunn Edwards paints- Only ceilings, walls, doors/ Casin & baseboards. No Cabinets!

Should concrete be protected?

@TheValuablepainter

Жыл бұрын

Hey buddy, General Contractor as He requested it , No need to cover flooring, Gave him price for Masking all rooms Concrete. Owners or G Have to request to Cover all flooring before giving a Bid. some job’s they do want to cover 90% of concrete floors a job used to work UCSD. Not this one. Thank you for watching

Hola sir how much did this project run. Labor plus materials if you don’t mind. I consider you a mentor kind of. I’m a General Contractor and thanks for getting back to me

@TheValuablepainter

Жыл бұрын

Job was $5,900 total Labor and materials. Was around 4-5 days to complete if I’m sure. Materials was $1,100 Dunn Edwards paints. Should of been $900 all materials last minute they went with Dunn Edwards Nice buddy, yes this job was for a General Contractor . New Construction job Thank You for watching all my videos

@laughoutlos

Жыл бұрын

Thanks for sharing hermano!

Why are you painting before ALL trim work is done? Are you hand painting casing and baseboard? If not, now you have all that prep/ masking off to do, to protect walls and flooring. ?!

@TheValuablepainter

10 ай бұрын

Hey king, New construcción jobs are by steps- framing electrical drywallers then painters flooring Trim Guys ect - We spray them on table horse then they installed them weeks after- Couple jobs when we really busy they will install them and we will have to mask walls flooring and spray them Thank you Boss for watching and subscribing

@Mcgrauce

10 ай бұрын

Yeh I know “new construction” jobs, I’ve done plenty. Never done a project with any missing casing trim or baseboard. Shoe molding is it. That’s too much extra work, but hey if they’re paying sounds good lol

@TheValuablepainter

10 ай бұрын

@@Mcgrauce I just finish a New construcción job, same we just did walls and ceilings for now, we over her in California, maybe your General Contractor Works differently. Yes sir if they built, they pay! 😂 Check this short video out, another New construcción house kzread.infoxfgmy0j938Y?feature=share

Ok, ok . Not terrible, but room for improvement . With all of my hard work and dedication. No matter who the boss was, or if it's me.. And I could be down painting a pipe gallery at a shit plant doing industrial epoxy finished. Spray or roll. Or working a commercial job doing some oil on handrails at a school. Or some fine finish or blow and go cookie cutter residential spec homes with latex and oil modified/ waterborne poly or laquer mix. 1. My crew and I wouldn't be working without being suited up in a proper uniform. And those are painter whites folks. From hat down to some Adidas white shell toe shoes. 2. Now if you plan to stay in the game full time and crush some years away stacking those racks$$. Then I highly suggest with all cost and no excuse. You should always be wearing a dam respirator doing any kind of brush, roll, spray oil, epoxy and Ect.And anything airborne always. Especially inside. A particile mask will not keep you out of harm from vocs and other nasty vapors. Not to mention all the silica and titanium dioxides pouring out of that little 311 spray tip you're using. Surprisingly enough, amonia is no joke either and potentially could have deadly side effects 3. Why do you choose to use such a small tip blowing primer on your lids? Are you using to small of a pump such as a Graco 395pc or titan 440. And only able to achieve 0.54 gpm. Or is it just something you have came custom to and have became comfortable with? I only ask, because a spec house with skip trowel finish . 3 bed 2 bath. Probably about 1600- 2000 ft2. Excluding a 2 car garage. I could by myself lay down 40-50 gallons in under 2 hours start to finish cross hatching my spray laps using no less then a 517 tip. Typically I personally like to and train my guys and gals once they become comfortable. To blow using a Graco 695 or 795 pro contractor series and a 621 tip for most ceiling and big wall. Laying down some serious paint to where it looks like glassy water about to almost start to sag but magically doesn't when application is applied correctly. 517-415 most other walls. 311 for closet and doors. 211 for those tight shitty areas you typically stick the new guy in😉! Not trying to sound like I've got an ego and realize everyone has their own system. But when your flipping new homes like that on the daily. It all comes down to production. 4. Now over my 18 years of painting for the good, bad and ugly bosses. And even after I became a boss and have learned it all comes down to the smile on a client or general contractors face. And the best way to achieve that is to pay close attention to detail. Every contractor likes their job done their way for the most. And we as subs don't always have any control in the scheduling. And I a perfect world me as the painter polishing every other subs turd and making it look like no mistake was ever made cuz that's what a painter does . I like to be the last crew in other then sparkys and plumbers dropping toilets and trimming lights and switch plates . That being said, I would prep and prime. Then sand all base and case. Blow all trim down with air,vac and tac and spray 2 coats finish. Then wrap trim . Blow any accent wall first. Mask and drop blue 99 In. Plastic which is meant to be sprayed on more then once verses black 9 ft. Which can only be sprayed on one time or you take a chance of a nightmare waiting to be had. Then spray all remaining walls main finish coat . Andi achieve my finish in one day coat achieved by a big tip and vertical half lap. Immediately following back through with a horizontal half lap " CROSS HATCH". Then drop 3M black 9 ft plastic to blow lids. . In a fucked up world and halving to come back to spackle and caulk and decide to spray or brush and roll your trim. I definitely get spray and lay with a roller because you're going to have so mainly touch ups by the time everyone is out that you might as well include the 3rd coat as a separate bid added on or back charge. But what I don't understand is how you get away with or allow spraying an entire houses walls with a darker color and able to walk away from that. Because I damn well know that my very trained eyes would be able to call out any bit of over spray and touch ups, even on a flat ceiling because no touchup sheen will ever match a spray finish without flashing . But then again I've seen painters not even understand what the hell flashing is. Might look great from your house, but how about from down the street? Anyways, we all cut corners. But I am asking are those corners cut worth it in the end? 5. Overall I give you a 7. Keep up the hard work. And seriously, put some whites on if you're going make painting videos. The professionalism goes a long ways when you look like a painter and not a guy working off of Jose's stucco crew. 👍 Knock em dead 🐯 and stack those racks boss💲💰💱

@ShannonLoring-od7ce

3 ай бұрын

Ps. You should charge more. I guy once taught me there is something wrong if you are getting all the jobs. Do you want to work your life away. Or only work half that getting paid the same if not more. If you have people wanting you to only be the one to paint for then. Then all completion is eliminated and you are worth what ever you say . And that's the difference between making $100 or a $1000 per hour! A job like this I would charge abouut$12,000 in today's market in salida,Co. And yet I would be one of the lower bids!

@TheValuablepainter

2 ай бұрын

Appreciate your Comment 👑 also thank you for your Rating & Subscribing. Let’s get that Money 👑

As you can see!!

@TheValuablepainter

Жыл бұрын

😅🥴😂, Thank you for watching Subscribe!

@lamentedflash5575

Жыл бұрын

@@TheValuablepainter as you can see not today

@TheValuablepainter

Жыл бұрын

@@lamentedflash5575 understand, Thank you anyways!