Ford S-max/Galaxy/Kuga ect 2.0 duratorq TDCI Fuel Filter Replacement And Bleed (QXWA, QXWB, QXWC)
Жүктеу.....
Пікірлер: 25
@krismcleod2722 жыл бұрын
Thanks. Doing this tomorrow. Thought I would be a real man and check YT first 😀
@ryanlangan29210 ай бұрын
You dont need to disconnect the return line at all but everything else is spot on cheers for the help 👍
@Chris_CDB
2 ай бұрын
From someone who has done hundreds…. You may get lucky.. (which it seems you did), but most won’t and you will need to pull the fuel through the pump.
@bazthehandyman4 ай бұрын
Good job....cheers.
@raviramiah5498 Жыл бұрын
Great video , thanks for sharing
@Chris_CDB
Жыл бұрын
Not a problem! Good to know it helped!
@vincenzocompagnone263611 ай бұрын
Good thanks
@Chris_CDB
11 ай бұрын
No problems!
@larseriksson8561 Жыл бұрын
Is it really necessary to vacuumsuck? Isn't it possible to cranck the engine like in a petrol car?
@Chris_CDB
Жыл бұрын
If the car has a lift pump (electric pump in the fuel tank) then yes you can cycle the ignition a few times to prime… however …in this case there is no lift pump… so you need to manually bleed the fuel system….. hence the video.!
@larseriksson8561
Жыл бұрын
Ok, i see. Do you by the way know what inner size on the hose i need to use on the connections?
@UgurPacaci Жыл бұрын
İ had fuel filter replaced and alternator, vehicle doesn't start now shows up code p0087 for low fuel pressure rail, the pipes going to the fuel filter are off and when cranked no fuel is coming to the pipes as well. What can the issue be?
@Chris_CDB
Жыл бұрын
The fuel system will need bleeding as per this video, there is no pump in the tank to prime the system.
@arnietwo112 жыл бұрын
What size of tube do i need to attach to the return tube to bleed / get rid of the air ? 10mm ?
@Chris_CDB
2 жыл бұрын
10 or 8 mm will do the trick.
@arnietwo11
2 жыл бұрын
@@Chris_CDB bought 8mm tube but didnt get good seal. I didnt disconnect the in and out tubes, likewise i filled up the reservoir when i put the new filter in. So just started it and no probs !!
@user-zq5dy1up4j2 жыл бұрын
Which year model
@jayfbee
Ай бұрын
He said 2013
@stevenkiel6452 Жыл бұрын
I just cranked it until it started, they are a self-bleeding system.............doh!
@Chris_CDB
Жыл бұрын
Seems 13k people disagree with this statement…!
@GetMoGaming2 ай бұрын
Worst. Hose clips. Ever.
@Chris_CDB
2 ай бұрын
Pretty standard across the motor trade to be honest
@GetMoGaming
2 ай бұрын
@@Chris_CDB Mine are snapped, and I have to use a screwdriver to get it in and out. I could design a better clip myself.
@Chris_CDB
2 ай бұрын
Maybe do that and get onto the motoring big boys with your improved design.!
Пікірлер: 25
Thanks. Doing this tomorrow. Thought I would be a real man and check YT first 😀
You dont need to disconnect the return line at all but everything else is spot on cheers for the help 👍
@Chris_CDB
2 ай бұрын
From someone who has done hundreds…. You may get lucky.. (which it seems you did), but most won’t and you will need to pull the fuel through the pump.
Good job....cheers.
Great video , thanks for sharing
@Chris_CDB
Жыл бұрын
Not a problem! Good to know it helped!
Good thanks
@Chris_CDB
11 ай бұрын
No problems!
Is it really necessary to vacuumsuck? Isn't it possible to cranck the engine like in a petrol car?
@Chris_CDB
Жыл бұрын
If the car has a lift pump (electric pump in the fuel tank) then yes you can cycle the ignition a few times to prime… however …in this case there is no lift pump… so you need to manually bleed the fuel system….. hence the video.!
@larseriksson8561
Жыл бұрын
Ok, i see. Do you by the way know what inner size on the hose i need to use on the connections?
İ had fuel filter replaced and alternator, vehicle doesn't start now shows up code p0087 for low fuel pressure rail, the pipes going to the fuel filter are off and when cranked no fuel is coming to the pipes as well. What can the issue be?
@Chris_CDB
Жыл бұрын
The fuel system will need bleeding as per this video, there is no pump in the tank to prime the system.
What size of tube do i need to attach to the return tube to bleed / get rid of the air ? 10mm ?
@Chris_CDB
2 жыл бұрын
10 or 8 mm will do the trick.
@arnietwo11
2 жыл бұрын
@@Chris_CDB bought 8mm tube but didnt get good seal. I didnt disconnect the in and out tubes, likewise i filled up the reservoir when i put the new filter in. So just started it and no probs !!
Which year model
@jayfbee
Ай бұрын
He said 2013
I just cranked it until it started, they are a self-bleeding system.............doh!
@Chris_CDB
Жыл бұрын
Seems 13k people disagree with this statement…!
Worst. Hose clips. Ever.
@Chris_CDB
2 ай бұрын
Pretty standard across the motor trade to be honest
@GetMoGaming
2 ай бұрын
@@Chris_CDB Mine are snapped, and I have to use a screwdriver to get it in and out. I could design a better clip myself.
@Chris_CDB
2 ай бұрын
Maybe do that and get onto the motoring big boys with your improved design.!
@GetMoGaming
2 ай бұрын
@@Chris_CDB Meh I got better things to design 😉