Thank you for showing how that shifter needs to line up. Every other video skips that part

Thank you so much!!! I've been looking for this for weeks.

Wonderful. Wonderful. You include common sense stuff we need to know and leave the bull out. Opposite of what the big guys do. Thanks for sharing your knowledge. God bless you. Keep it up. I know a lot about the old stuff made in the 50s to the 80s but am lost after that. I used to work in a machine shop and always shared my tricks. The customers loved it and always came back.

@autohelp6504

4 жыл бұрын

Your welcome. I love working on the old stuff. My 54 is so much more simple.

Awesome video! Thank you so much. I'm going to replace my lead frame this weekend. Should be much better with this video to use as a reference.

I was afraid to tackle this project, but your video is leagues above even the pros trying to show this. THANK YOU! You did not miss a detail. It took me three hours but only because I was laying in the gravel on the ground, but you did an amazing job and I got it put back together and it works great! Thank you so much! Mark in Wisconsin!!

@autohelp6504

3 жыл бұрын

Glad to hear this. That is a tough job on the ground.

@jstealth5861

Жыл бұрын

I have a lift but still just put the truck on ramps lol

@WuffyWufferson

Жыл бұрын

Yeahhh i gotta do this soon! Looking forward to this aweosme.. Job X3 don't seem too bad at all! I was worried when I got a 3k estimated bill from the auto shop. X3 less then 200 bucks if I do it myself with then 180 for reprogramming

@alb12345672

Жыл бұрын

@@WuffyWufferson No programming unless you replace the valve body(solenoids). And you can do the programming almost free with forscan for that.

@vicentebchacon

8 ай бұрын

@@autohelp6504 Hi, I would like to know if the module is compatible with a Ford F 150 year 2011 with 5.0 V8 engine model FX4?

Thanks for this video. Super helpful. Nice rims.

Spot on! using this video IJust did mine on a 13 Ecoboost. No surprises! Thank you!

@robjordan204

Ай бұрын

Did it fix the problem. Mine won't go higher than 5th gear and won't go lower than 3rd gear at a stop. Showing code P0720

Excellent video! Very helpful. Thanks a lot!

I just did mine today,dealer wanted over $2000 cause my suv has rebuilt title and void warranty, $150 part from amazon,$40 oil,2 hours of work Thank you so much buddy,great video

@autohelp6504

4 жыл бұрын

Glad to hear!

@adrianchavez4749

3 жыл бұрын

Can you post the amazon link to the part. Is your truck a 2011?

@soloriomartinn

3 жыл бұрын

@@adrianchavez4749 Check this out at Amazon.com OEM Genuine Ford Connector Assembly for 2009-2014 Ford F-150 AL3Z7G276D www.amazon.com/dp/B00XLL5HQC/ref=cm_sw_r_other_apa_i_0iK-EbDMWGB43

@soloriomartinn

3 жыл бұрын

@@adrianchavez4749 they just went up on price,cause ebay has them for $400

Best video,great explanations thanks

Works for Mustang 2012 too. Thank you for the vid helped a lot

Was thinking I'd do this job, your video is awesome and showed me I probably better not! lol. Thanks!

@autohelp6504

2 жыл бұрын

Any time!

Fantastic video thank you.

You my friend would be a great teacher

helped me solve my issue! thanks!!!

I have watched several videos concerning this tranny and yours does a good job on the shift linkage connection and showing how the electrical connector has the rotating piece that makes it lock in so thanks for that!

@autohelp6504

4 жыл бұрын

You're welcome. Those are the areas I struggled in so I tried to explain them well.

Great video man!

@autohelp6504

4 жыл бұрын

Thank you!!!

Awesome job man.

excellent!! I'm going to try and tackle mine this weekend. Thanks for making it easy enough for a motorcycle (shade tree) mechanic to figure out!! LOL

@autohelp6504

2 жыл бұрын

Good luck! Message me if you run into a snag.

@JB-tw6hg

2 жыл бұрын

@@autohelp6504 man, everything went smoothly…well, except for draining the fluid. Lessons learned, buy a new pan with a plug (eBay ~$60), and a small torque wrench (0-50 ft#). The instructions were exact. Total time was about 4 hours. Thanks for the help, your an awesome person for making this video.

@autohelp6504

2 жыл бұрын

@@JB-tw6hg That's great. Glad i could help.

Thanks for the wisdom!

Nice thanks for the help

That damn spring thing wouldn't stay in 😂 I remembered you said put a little grease on it and sure enough it stayed on.

Thank you sir, just saved me a couple grand. Wow followed step by step trans is back to normal.

@autohelp6504

3 жыл бұрын

That is awesome. I am glad to hear that.

@nathanpaul88

3 жыл бұрын

Hey art, were you pulling a p0705 code before this? I don’t wanna tear my tranny apart but that’s the code I’m pulling. Had an issue putting it in reverse the other day.

@artmont9043

3 жыл бұрын

@@nathanpaul88 yes

Just a FYI this works for 2016s as well that have that same part number thank you!

Literally in the process with doing this myself, took mine to Ford dealership they're giving me the run-around they can't replicate it there's no code stored and I don't have time for it to sit down for this maintenance guy to drive it around for however many days it takes for it to happen again just so they could diagnose it, of all places I found one at Advance Auto Parts for $200 just going to knock it out myself thank you for the video

@autohelp6504

2 жыл бұрын

Good luck. I will be here if you have any questions feel free to ask.

@Guap303

2 жыл бұрын

@@autohelp6504 I appreciate the hell out of that, thank you sir!

4:40 Genius, I never thought of putting grease to keep it from falling out.

Excellent video! Explained it all in a way anyone can understand, left NOTHING out. Thank you! I just became a subscriber.

@autohelp6504

4 жыл бұрын

Thank you!

OMG THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU

Have this problem with my 2016 5.0 F150. It wouldn't start, or it would idle rough and die. Took it to ford who claimed my trans was completely dead - gears were sheared as per the advisor. Quoted me $8k with parts, taxes and labor for a new one. Or, said I can trade it on a new one, but I wouldn't get much for mine due to a failed transmission and high mileage. Didn't belive the guy for a second. Took it to the private shop I goto usually and this was what the problem he said. Getting fixed rn. I'd like to try escalate the situation with ford who tried to screw me over and have me pay 8k!

Nice video

Liked and subscribed. Again thanks man great video. Saved a ton of time and money doing this myself plus I learned something and felt good knowing I took my time and did it right. Apparently previous owner put royal purple Max ATF in this trans, didn't have an issue with it but I'm doing the motorcraft Mercon LV. Reason for lead frame replacement was that every once in a while it would go into limp mode and throw a wrench light. I'm whipple charged so my throttle body is different than stock but I cleaned it anyway. When it still threw wrench light and went into limp mode I decided the lead frame was probably the culprit. We'll see. Regardless the leas frame in these trucks is a common issue. I replaced it with the new version which looked the same except for different part number and that foam seal at the solenoids. Do you recommend flushing out the rest of that royal purple? Any issue with a small amount of it mixing with the motorcraft?

@autohelp6504

Жыл бұрын

you should be fine not flushing out the rest of the royal purple. it is almost impossible with these transmissions anyways. the thermal expansion valve makes it difficult to get everything out of the system.

Great repair video...step by step. Not a mechanic but handy and I can do that!!!! I assume repair is the same for the 2009 F150 lead frame with same trans...(?). Thanks🐾 Subscribed

@autohelp6504

4 жыл бұрын

It is the same.

Great video. So much better than another one I watched previously. Clear, concise, and you did not skip anything ...except you did not mention the vehicle speed sensors. Do they come with the lead frame (since they are installed in it), or do you have to provide them? Also, you could include torque values for lead frame, valve body, and pan (not sure if this is correct, but elsewhere I have seen them as: 53 in-lbs, 71 in-lbs, and 97 in-lbs, respectively). Again, thanks!

@autohelp6504

4 жыл бұрын

Yes the oss (output speed sensor) does come preinstalled in the lead frame. I thought about including the torque specs after it was already posted. this was my first ever video and attempt at editing. next video should be better. Thank you for your compliments/advice.

@jstealth5861

Жыл бұрын

Oof speed sensors? I didn't even look at those, they didn't come with my part and don't think they're a reason for my issue. Thanks for the torque specs tho, I just tightened by hand but not over tightened. Nice thing is I red this before my pan went back on so I'll check those torque specs

@jstealth5861

Жыл бұрын

Damn dude you did great for a first video! great work

This was a great video. I think I can do this job. What is the torque on the bolts.

You said there are 2 filter sizes? i have the FT-188, what is the part number of the other filter i think i might have put the wrong filter size in my trans and now i just have reverse, i put it in drive and it sounds like it clicks into gear but sits there i rev it and nothing, i checked it with my scanner and i can see its going through P,R,N, and into drive, im wondering if the filter might be bottoming out on the trans pan?

You said 8 bolts. Looks like a lot more than 8 that you put back in? I get the trans pan and the 3 in the lead frame but did you only pull 8 in the video or more?

My truck had a no crank no start issue. I send it to my dealer and they change the lead frame. Now it starts. Took 4 weeks for the parts to get here.

Real nice video, Did not mention the DTC codes, are they P0706, P0702, P1702, P1921 Is it possible before performing that exercise to check the integrity of TR sensor with Multi-meter ?

Çok güzel olmuş eline sağlık

Excelente. Tanks. Bro. I can do it. Let's go doing!!!

My Gen 2 6R80 with only 1600 miles on it after a rebuild, flared 300rpm from a 5-6 gear shift. Now, when trying to move forward, it seems like 90% of the line pressure isn't allowing full engagement in D, and the RPM just climbs with very little forward movement. Reverse engages perfectly fine. The car was driving perfect for the first 7 minutes, and then this came out of nowhere. I believe its a solenoid/valve body issue. No codes came up. I am swapping the valve body, bridge and tube seals today.

@autohelp6504

Жыл бұрын

Sounds like you are on the right track.

Thank you.

@autohelp6504

2 жыл бұрын

You're welcome!

@chiefofsinners978

2 жыл бұрын

@@autohelp6504 seriously, I was screwed, until your video. Your awesome

Hi. I spoke too soon...I went out today and the truck wont turn over, crank or click..nothing. I am wondering if the connector pin at the back of the tranny would have anything to do with that? It locked in nice and tight with the new coupler, battery is fully charged, but won't start? Just wondering if you might know anything there? Thanks a bunch. Mark

Very good video!!

Excellent summary of replacement! My question is, before installing drain pan, would it be safe to VERY BRIEFLY turn ignition key on and off to make sure it sounds like it will crank. Heard some guys having to go back in after buttoning it all up due to no crank situation. Could be that connector is corroded or not aligned. Thanks.

@autohelp6504

Жыл бұрын

would not hut a thing.

2012 here has transmission issues dealership said could cost 5k easily to repair so I bough a reman transmission it ran good for 3k miles then only had reverse 3rd and 5th code says shift solenoid stuck on and now the truck won’t move at all forward or reverse

Thank you for those instructions doing this project right now, question, will it have to be reprogrammed after you install a new one like the range rovers and BMWs?

@autohelp6504

Жыл бұрын

it does not require proramming.

Beautiful 🔥🔥😘😘😘

That work in my ford expedition limited 2014 or not help me please where is located solenoide A

I have a 2014 Raptor , it’s been like 3 months since I’ve changed the Transmission fluid , recently there is a Hard Downshift from 5-4 coming to a stop , ( sometimes it happens ) I have also 40 inch tires with 4.88 Front and rear gear ratios

@autohelp6504

4 жыл бұрын

Sounds like you need to clean all of the electrical connections inside the tranny pan real good with brake cleaner.

@Khaled-tx5xj

4 жыл бұрын

Auto Help so you mean cleaning the inside of the tranny which is the solenoid for the 6R80 ? and should I change the filter of the tranny at the same time ?

@autohelp6504

4 жыл бұрын

@@Khaled-tx5xj yes, unplug all of the connectors and clean them real well. Also clean the magnets on the pan really good also. Definitely install a new filter and fluid as well. A big problem with these transmissions is metal clutch shavings build up around the plugs and cause small shorts in the electrical system.

Hola como se llama la pieza esa que va atornillada al cuerpo de valvulas?

excellent video, and thanks for sharing it, it's very helpful, I just have one question? Is the new module programmed, or does it have to be programmed. l have codig P0720

@autohelp6504

2 жыл бұрын

It is programmed and ready to go.

@rethidlopex2823

2 жыл бұрын

@@autohelp6504 thanks for la información. Blessings

Hey man thanks for this awesome video. I’m thinking I need to replace my valve body on my 16 f150 5.0 ; 97k miles ,6r80. I’m having intermittent shifting issues particular at faster speeds on highway.sometime when I press on gas to go faster tranny gets stuck in lower gear and the only way to get it back to normal is to let off the gas and cycle back through gears. Anyway was hoping for some insight if you think that could be the problem and also if I change this part will I have to do any programming or reflashing of anytype? Im replacing the entire valve body and lead frame. Thanks!!!!!

@autohelp6504

Жыл бұрын

It sounds like you are a good candidate for a new lead frame. metal clutch material builds up on the electrical components in these causing shorts. you will not need to do any reprogramming. make sure you have lots of brake cleaner o hand to clean up.

@andrewshah10

Жыл бұрын

@@autohelp6504 thank you so much for the reply man!

My truck starts up good then when I put it in reverse it takes 5 seconds to get in gear and works fine then soon as I shift it in all the other gears the lights go out telling you if your in neutral or drive and all the low gears but as soon as you cut the truck off and start it back up if I go straight to drive I have no problems at all light are on and it hits every gear no problem took it to a transmission shop they say I got a p0705 code transmission range sensors a circuit park/reverse so I went got the same peace you put on your truck hopefully that's the problem!!

@maniacfitness4578

2 жыл бұрын

What you think?

@autohelp6504

2 жыл бұрын

@@maniacfitness4578 Mine was doing the same thing. I am confident this will fix you right up.

Very informative video. I have a 2011 F150 and it had the hard shift from 1st to 2nd and my gear indicator on the dash is out, would you recommend changing the valve body also?

@autohelp6504

Жыл бұрын

yes

@buckyjones2107

Жыл бұрын

@@autohelp6504 Does tcm needs any flashing on 2011 F150 with the install of the valve body and lead frame install? Thanks in advance. By the way, you are the man!

@autohelp6504

Жыл бұрын

@@buckyjones2107 It does not. Glad I could help.

I'm looking into F150 and I'm seeing this issue is fairly common yet the part is discontinued, not sure why a part would be so hard to find when this is a known problem. Also seeing it mainly happen to trucks with ecoboost. Do you know if trucks with a 5.0 have the same issue?

@autohelp6504

3 жыл бұрын

It happens with all engine types. The part is not discontinued.

@WuffyWufferson

Жыл бұрын

I found a lot of ebay for 200 bucks

My 09 f150 fx4 80k drives and feels fine with a blue wrench light on the dash code p1707 but got diagnosed with a bad Mechatronic module. Any information on this particular case? How much was yours?

@autohelp6504

4 жыл бұрын

Unfortunately i do not have much experience with this particular issue. I believe it has something to do with the transfer case.

Hello, thanks for your video. I have a 2014 f150 eco boost with around 60k. Hard down shift into low gear at highway speeds. Intermittent slipping of transmission at low Rpm. I have also had the wrench light go on then off with speedometer not engaging. Symptoms will go away for a bit by turning ignition on and off, while also cycling through gears. Then vehicle will drive completely normal for around 40 or so miles. Does dealer say no recalls related to lead frame which I feel like it definitely is. Of course they recommend transmission replacement. Haven’t taken it to local transmission shop yet. Seeing what your course of action would be? Appreciate your time Would buy you some beers if you lived near me.

@autohelp6504

2 жыл бұрын

Sure sounds like a lead frame to me. When was the last time your pan was off? You may have a bunch of fine metal clutch clutch material built up around the plugs and solenoids causing it to short out. I would drop the pan and if that is the case give it a good cleaning with brake cleaner and compressed air. Fill it back up with fluid and a new filter and see what happens.

@trevor1986

2 жыл бұрын

@@autohelp6504 dropped it off at the trans shop yesterday, going to get the lead frame replaced. Hope it does the trick. Thanks for the reply!!

@autohelp6504

2 жыл бұрын

how did this work out for you?

I have mustang 2012 6r80 the same trans you have ,I got p0705 which is” transmission range sensor A curcit (PRNDL) input , i changed the same that you changed too, but problem still appeare, I can’t use gears “1-2-3” and on D its running normal like any cars, but when I try to go with 3/2/1 or any , wrench light pop up!

@autohelp6504

4 жыл бұрын

Check the wires going to the transmission and make sure they did not get smashed,worn,or burnt.

Is the new lead frame designed better since these recalls or is it the same part that can make it fail again?

@autohelp6504

3 жыл бұрын

It is pretty much the same except a foam gasket around the electrical connection has been added to prevent small metal fragments from collecting around the terminals causing a short. Replace the fluid more frequently and you should never have another issue.

Question about the foam on the lead frame, when you took it out there is no foam on it. Did the directions say why when putting the new one in there was foam going on the connectors? is that part of the fix of the lead frame not grounding?

@autohelp6504

4 жыл бұрын

yes, the foam is designed to keep metal shavings from building up around the electrical connectors. It is part of the upgrade.

@timothymaxey9599

4 жыл бұрын

@@autohelp6504 thanks. Planning on doing mine shorty.

Great video. I have a 2016 f150, I got codes p0706 and p0707. When I try starting my truck, some days it starts, some days it doesn't only the lights would come on wouldn't turn over. When it would start, the lights for what gear it's in would flicker. Would that be the sensor? From what I read on the codes I got said my truck would go in limp mode or no start mode.

@autohelp6504

4 жыл бұрын

It really sounds like you have the same issue.make sure your bulk head plug is tight and free of corrosion before you do anything. I would also inspect the wires real good as well.

@autohelp6504

4 жыл бұрын

Check to see if your vehicle falls under the recall before you do anything.

@BR-rt7kj

4 жыл бұрын

@@autohelp6504 is there transmission recalls ford f-150s? Thanks for your replies.

@autohelp6504

4 жыл бұрын

@@BR-rt7kj yes for the o.s.s replacement or reprogramming. This would definitely cause the issues you are referring to.

@BR-rt7kj

4 жыл бұрын

@@autohelp6504 how long did it take you for this job? How did your truck perform after?

I got a P0720 code with the wrench on my instrument panel, my truck was stuck in 1st gear, I deleted the code and my truck started to run normal again. Do you think the lead frame will still need to be replaced? My truck is an 11 f150, thanks

@autohelp6504

4 жыл бұрын

My truck did the same thing and then finally got stuck for good. I would guess that its just a matter of time before yours does it again.

@josueflores5146

4 жыл бұрын

Auto Help I appreciate the reply, I called Ford and there’s an extended field service action, Ford extended the coverage on the lead frame for 10 years or 150,000 miles. They told me that my truck qualifies, however since I deleted the code they can’t replace the lead frame until it happens again and I have to get it towed with the code or wrench on the panel, not sure if they’re reimbursing owners for repairs already done but it’s worth looking jnto it, thanks again I’ll keep you posted if mine ever gets done, well when it does hopefully I’m only at 98k miles currently. www.cnbc.com/2019/02/13/ford-issues-3-recalls-covering-nearly-1point5-million-vehicles.html

What was main reason for you to change the bridge? Just curious, I currently have a spermatic wrench and now a check light. Trucks shifting weird 5-6. Code is reading a po741 for a torque converter issue. This all coming after having the flash recall done a couple months back.

@autohelp6504

4 жыл бұрын

The main reason I changed it I would put the truck into drive and it just would not go anywhere sometimes. I could shut the truck off and restart it and sometimes it would move. I was getting the wrench in the display. If I were you I would drop the pan and clean everything really really good with compressed air and brake cleaner. make sure you even clean electrical connections because the fine shavings build up around those connections causing them to slightly short out causing the issues you are describing. Also new fluid will do wonders Im sure your fluid has some miles and is losing viscosity. Make sure you clean the magnets in the pan as well. Let me know if this helps.

@jbrady5979

4 жыл бұрын

Auto Help thanks for the reply, I just paid to have the lead frame replaced by the dealer. New fluid and screen. Took the truck last night and it’s still dropping out of gear and shifting like crap and the dealer called me and said that’s normal because of the learning curve after they flashed it to update the new software. I said that’s not the case. After you replaced the lead frame was yours doing this for a while and stopped?

@autohelp6504

4 жыл бұрын

@@jbrady5979 no, mine was fine right away. Although I did not have any reprogramming like you did. I would have that dealer recheck your fluid level after driving it some. They are kind of tricky to get absolutely full. the fluid needs to be pumped in while up to temperature. then you need to cycle through the gears and then recheck several times.

@j120772

Жыл бұрын

I found a lot of fine metal shavings on the little brown part that slides. I wiped it off. Mine wouldn't light up the reverse light and then took a while to go into reverse. When it finally went into reverse the reverse light still didn't come on but the wrench icon did and it went into reverse. I wonder if I can just clean it will and make it work without changing the entire part.

Nice video sir did you have e reflash anything ? Or just delete the codes the came up

@autohelp6504

3 жыл бұрын

No reflash required.

@jdmmarcelo10

3 жыл бұрын

@@autohelp6504 thanks awesome doing this to a car on Wednesday

Any tips on getting the retaining clip for the bulkhead connector back into the locked position? I’m having a helluva time getting mine to even budge.

@Lineman12.4

3 жыл бұрын

2010 5.4 f150 lariat

@autohelp6504

3 жыл бұрын

make sure the bulk head sleeve is all the way in. that is the plastic housing that the wires run through the transmission. I had the same problem.

@Lineman12.4

3 жыл бұрын

@@autohelp6504 I’ve finished my project! Had to go back in and re-install the trans filter because it fell out the first time. What a pain doing it on the ground, outside, in north New Mexico during the first snow storm lol.

@autohelp6504

3 жыл бұрын

@@Lineman12.4 glad to hear you got it finished. i have had my fair share of working on the ground. went out and purchased a lift, best money i have ever spent.

Good video, but no torque specs for reassembly? And, can you list part number for the lead frame?

@autohelp6504

3 жыл бұрын

71 in lbs on the t-30 bolts that hold the valve body in. look in the beginning of the video@ 0.33 I show the box that the part came in, The part number is on the box.

I cannot get that white retainer clip to slide back up in the lock position, with or without the valve body seal in. Any tips?

@autohelp6504

5 ай бұрын

you have to make sure that bulk head sleeve is all the way in before that retainer clip will go in.

Do you have to have the tcm reprogrammed after the installation?

@autohelp6504

3 жыл бұрын

Amber Strickland no

What's the torque and tightening sequences for the lead frame to valve body, the valve body to tranny and transmission pan bolts?

@autohelp6504

4 ай бұрын

to be honest I just tightened them with no regards to torque specs. LOL

Great vid. I just had to replace the lead frame unit as well due to experiencing random shifting issues and trans getting stuck in 1st gear. Code P0720 (output shaft speed sensor). This vid helped, thanks.

@autohelp6504

5 жыл бұрын

Glad I could help.

Hey mate i have got ford ranger 3.2 auto trans 6R80 , everytime i downshift from gear 5to 4 gives me a jerk other gears shift and downshift nicely what do you reckon the issue might be? Valve body or the solenoids? Car has done 304k kms

@autohelp6504

Жыл бұрын

look for metal clutch wear material built up around the connections of the shift solenoid plugs. If there is none present it is more than likely the shift solenoid.

Will this sensor cause a no crank/no start issue? I'm not getting any DTC codes? I'm stumped as it seems intermittent.

@autohelp6504

3 жыл бұрын

Daniel Keronen it could if it is not registering that the truck is in park or neutral. Is the park light on th indicator illuminated?

Hi guys, I have a Ranger 3.2 with 6R80. Can someone help where to buy it? Ebay unbranded are a good option? Has someone use it?

Is the lead frame the same on the mustang ? part number wise I can only find replacements for f150s but I have a 2012 mustang.

@autohelp6504

4 жыл бұрын

It is the same.

@edross641

2 жыл бұрын

@@autohelp6504 How about 2017 Mustang

Hey bro I’m working on a 16 did they not use the spring on the thermal valve or did it roll away from me?

@autohelp6504

3 жыл бұрын

As far as I know they did not get rid of the spring.

Sk mine is leaking thru the connector. Do you think that bushing is what failed and can be easily replaced?

@autohelp6504

Жыл бұрын

Yes that is called the bulk head connector i believe. you can just change the o ring on it or the whole piece that's up to you.

Followed your steps and got the lead frame replaced but now my truck won’t start and says it needs to be shifted to park when it’s already shifted into park. Any clue what went wrong?

@autohelp6504

3 жыл бұрын

just guessing, but it sounds like something is not plugged in all the way.

The answer was in the comments thanks

@autohelp6504

2 жыл бұрын

Glad i could help.

How long did it take you to do the whole project

@autohelp6504

4 жыл бұрын

About 2 hrs

Why did you replace the range sensor exactly, and did it solve your problem?

@autohelp6504

Жыл бұрын

erratic shifting, randomly would not move, and sometimes no reverse.

Awesome video!! I have a 2014 F150 5.0. Just got a P0706 code. Could this be my issue? Thanks

@autohelp6504

Жыл бұрын

Yes

@ivanpacheco649

Жыл бұрын

@@autohelp6504 thanks for your quick reply!!

is it the same as TRS of 2017 ford transit van?

@autohelp6504

Жыл бұрын

not sure

Great video. I need to replace the same part. Sensor range or something. But my question is, If i change that part i need to reprogram the ECU with the new part..?? Some people say i got do it. But some other guys says no. So im confused. Somebody can let me know please.

@autohelp6504

2 жыл бұрын

I did not have to reprogram mine when i installed it.

Where’d you buy the sensor from??? And how much was it?

@autohelp6504

4 ай бұрын

Ford. It was about $300

HOLA SOY DE ARGENTINA TENGO UN PROBLEMA CON UNA RANGER CON ESTA 6R80 CAMBIE LA CAJA PERO EN MI ESCANER ME DICE SENSOR DE PALANCA Y NO ENCUENTRO EL PROBLE LA LLEVE A CONCESIONARIO FORD Y NO ENCUENTRAN EL PROBLEMA ,SERA CAJA DE VALVULAS LA PARTE ELECTRONICA ESA QUE ES COLOR NEGRA MUY INTRITUVO EN VIDEOY POR SUPUESTO TRADUCIDO GRACIAS

@autohelp6504

2 жыл бұрын

English please.

Hay que programar la pieza con el vehículo

Hola Desde México Tengo un problema en cambio errático en baja velocidad de 1 a 2 solamente embraga se suelta y después patea Al acelerar un poco más rápido el problema desaparece Será que está sucio la parte interior del Leadframe No soy Mecanico pero me gusta meter la mano Gracias por su respuesta Estaré agradecido

@autohelp6504

Жыл бұрын

Very likely.

They just did a recall fix for this very reason for my 13’ it shift like a lambo now

@dmithsmith5880

3 жыл бұрын

I have a 13 stx with the natural aspirated 3.7.. The tranny shifts up nice and down nice except when shifting down from 5 to 4 it kind of bangs.. not terrible but enough to be annoying.. Was yours doing that ?

Hey...followed instructions and no engagement when placed in any gear. Could I have fried the board cuz I did not remove the battery cable or I did not get the shift linkage in slot on trans side. Any wisdom on this ? Thanks😊

@autohelp6504

4 жыл бұрын

I would say you do not have the linkage hooked up properly.

@phil-fr4lg

4 жыл бұрын

@@autohelp6504 well I have to drain and look at that again...99% sure detent was in the slot. Can I drain and turn ignition switch to accessory to move shifter linkage and validate full range of position - without fluid or starting. But if nub is seated correctly..then what? Could I have a bad new lead frame or did I fry it by not removing battery cable...thanks for your insight again😊.

@autohelp6504

3 жыл бұрын

@@phil-fr4lg sorry i did not see your last question until now. Have you figured out what was wrong?

@phil-fr4lg

3 жыл бұрын

Linkage was correct for valvebody & leadframe...went with defective leadframe. Tech said it might be that the PCU needed to be updated to latest software because mine has never been upgrated from 2009. We'll see what happens with new unit...thanks. Will update when completed for everyone😊

Do you or anyone in these comments have any experience with the dorman brand of this part? I literally have looked everywhere for the Ford oem one and can not find it. I did find a dorman one

@autohelp6504

2 жыл бұрын

You will be fine with the Dorman brand.

@felonies

2 жыл бұрын

Thanks for the reply. Just installed it today. Drove about 70 miles so far with no issues!! Fingers crossed

We’re you get the part ?

@autohelp6504

Жыл бұрын

Ford dealership

Pascagoula cannon ford lied to me as the recall calls for an upgrade of that control module.. they said reprograming it was the upgrade.. my ford is still messed up

How much would you charge for this job with parts?

@autohelp6504

3 жыл бұрын

$600-$800

Mate the white clip thing you pull down.. I can't get it back up.. Its stuck down, it's holding me up, you missed it in the video, how do you get it to slide back up???

@autohelp6504

4 жыл бұрын

Typically if it will not go back in that means that the big electrical plug is not inserted completely. there is a notch in that plug and it will not go in all the way unless it is lined up.

@wogboy4708

4 жыл бұрын

@@autohelp6504 yep got it mate thanks for the reply, it was actually in too far pulled it outwards at the same time as pushing up and it popped up. Just so you know you put the crapy valve back in, they make an upgraded valve replacement that allows constant flow.

Is this TR senso repair due to a P1705 code?

@autohelp6504

2 жыл бұрын

It is.

What breaks on these? can they be overhauled?

@autohelp6504

3 жыл бұрын

The small metal shavings created from transmission wear build up in the lead frame and cause it to short out.

So I had something weird happen with a 2010 I just bought , went to drive my truck shift into reverse nothing , shift into drive nothing , also have the P0741 code and really dirty trans fluid , do you think this will fix it? And what kind of effect would clean fluid have on these two problems?

@autohelp6504

4 жыл бұрын

Is the gear indicator moving from park to the gear you are selecting?

@biggameslayer3782

4 жыл бұрын

Auto Help Yes it moves but the truck doesn’t when it is in whatever gear I shove it into.

@biggameslayer3782

4 жыл бұрын

But then it randomly starting working again.

@autohelp6504

4 жыл бұрын

@@biggameslayer3782 I would look into cleaning the transmission really good and replacing the filter. you may even have to do it twice.

@biggameslayer3782

4 жыл бұрын

Auto Help Took the pan out , unreal amount of metal shavings and what looks like silver anti-seize , cleaned it up and put new filter and fluid , now it will just slightly start moving at about 4,000 rpms.

Would your F-150 clunk hard when you would go from Park to Drive and Drive to Reverse and Park to Reverse??

@autohelp6504

3 жыл бұрын

No, mine did not have any symptoms like that.

@juanperez-ni2iw

3 жыл бұрын

mine does that. did you fix it and how?

@ethangrahampowell

Жыл бұрын

Bit late but mine did that when shifting to drive as it would shift to 3rd or 5th gear instead of first giving a bit of a kick as you mentioned. If you shift to manual, it will show what gear you are in and probably won’t be 1st

Do you need to reset the transmission after taking out the valvebody?

@autohelp6504

4 жыл бұрын

No you do not.

@FeellWellBeWell

3 жыл бұрын

I just replaced it and the truck now won't show what gear is on. Any suggestions