4 years in british Parachute Regiment 2bt. 1979 to 83 I must have put thousands of rounds through my personal weapon and never had any issues. Nor did my mates. Used in anger on the Falklands, again no probs. I can only assume that the refurbished examples available in the USA have been poorly refited with parts which have already recieved wear an tear in another weapon before being scavenged for spares. Once a part has been "Run in" in another rifle, it'll never perform perfectly out of that gun.

@Admiral_Pumpout

7 ай бұрын

As an SA80 era soldier of 14 years in the Royal Engineers the biggest thing I learned was to never argue with a sweat that the FAL was inferior to the SA80!

@jongercama1842

7 ай бұрын

Because you'd get your arse kicked, LOL. @@Admiral_Pumpout

@keenymeeny2

7 ай бұрын

82-87 SLR no issues loved it,,, best infantry rifle apart from my favourite SMLE 303 which I use up the range

@MicMc539

7 ай бұрын

The mag feed problem is caused by fat LARPers resting the mag on something instead of supporting the weapon with their keyboard thin wrists. Lazy civilians.

@famalam943

7 ай бұрын

Thousands of rounds in a few years sound like somethings changed with marksmanship training in recent years. My brother is currently in the paras, he was complaining he didn’t even break double figures with live ammunition last couple of years. This isn’t uncommon apparently

"Ziga's AK started having the exact same trouble." Those pops in the background you're hearing aren't other shooters doing their runs, it's a significant portion of the internet furiously exploding in response to someone suggesting an AK had a reliability issue.

@levanpkh6882

7 ай бұрын

nice one

@MrFROGY1313

7 ай бұрын

His ak is cheap crap

@TzunSu

7 ай бұрын

@@MrFROGY1313 Of course it is, they all are.

@El_Jefe_Maestro

7 ай бұрын

@@TzunSu Gets the job done, unlike fatass civilian LARPers no real soldier or warrior cares about a million dumb gadgets or having the most futuristic materials.

First off I wish to compliment the Bloke on the fine, Britsih Army approved mustache he's sporting. Good show sir! :D The L1A1 SLR still has a special place for me, being the first semi auto rifle I ever shot. She may may be a big bugger but damn does she do WORK!

I was issued the heavy barrelled, bipod equipped version of the SLR, the L2A1 back in my days in the Australian Army Reserve. It ran beautifully with a 30 round mag despite being an old rifle if I cranked up the gas plus to give it more gas. Lovely rifle to shoot. Interesting to see the L4 mags working well.

@markwalker4485

7 ай бұрын

Hated the C2a1but my C1a1 made in 1958 ran 1000s of rounds just by me with no problems

@davidqbs

7 ай бұрын

I bought my Lithgow L1A1 from the NZ army in 1987, Shot it a lot in competition and it was entirely reliable. Never had a major issue with it, It would still be a go-to rifle. Never had a problem with the L2 mags either.

@kiwisteve6598

7 ай бұрын

Same here in the NZ Territorials in the 1980’s. Our platoon had a couple of HB ones. 30 round mag worked fine but was a bit of a pain size and weight wise so tended to fit the regular 20 round mag for usual carrying and keep the big one in the pouch unless there was a good reason to upgrade eg at the range

@OZMAN1964

7 ай бұрын

Want it an L1A2

@triumph-owner

7 ай бұрын

Used them in the NZ Army reg force during 80s. Issue was the gas tube coming loose and failing to cycle. Leaking gas, armourer showed me how to fix as I bought one for myself when they were replaced. The L2A1 had the nick name as the bang bang jam gun

We used to load only 28 rounds in L4 or L2 39 round magazines (L4A4 Bren or L2A2 AR) with first two rounds loaded tracers (last rounds fired indicated you would need to reload) without trouble in Mallee Red Dust ..... Gas settings important too! Australian Army 1976-1989

@jongercama1842

7 ай бұрын

In the ODF we did second to last ARA ARINF RAR 85-97.

@becs2635

2 ай бұрын

"Gas settings important too!" spot on! ex 1RAR

We had a similar problem with the dust in central Australia until we started using graphite powder as a lube, rifle was dry and ran like a Swiss watch.

@mikesmith3704

7 ай бұрын

And, in fact, the SOP for an SLR in desert /high dust conditions was to use graphite not oil as the lube

@screwyu1329

7 ай бұрын

@@mikesmith3704Someone forgot to tell us the SOP. We found out through shear arse and necessity.

@johnbooth3073

7 ай бұрын

It was a British Army SOP possibly didn’t get translated into Aussie ! The only malfunction with my SLR was a broken firing pin and once had to change the gas setting from 6 to 3 when lots of sand got blown into the rifle during strong wind on a range amongst sand dunes. Had two maximum scores on APWT with SLR close but no cigar with SA80 . Much preferred iron sights than 4x magnification.

@screwyu1329

7 ай бұрын

@@johnbooth3073 I had a slightly different experience with the change to new toys. Loved the slur but started getting outstanding results with the F-88 Aust Steyr and it only had a 1.5x scope.

@johnbooth3073

7 ай бұрын

@@screwyu1329 Great rifle ( I thought it had 2x scope). But you can’t use it left handed if you’re shooting around cover such as a wall or tree . If you need to do that you have to expose your body in order to squire the target and shoot. Or did the Aussies, Irish, Austrians fix that ? The Israelis did with their Tavor bull pup which looks pretty similar to the British original bull pup that never went into production because the Americans made everyone go 7.62.

Bloke's epic stache and side burns won Finish Brutality

@terrygardner3031

7 ай бұрын

When I first saw his video on Finish Brutality my first thought was of s Soldier of Fortune picture of a Rhodesian trooper. If I hadn't thrown them out years ago I would have posted it as it looked just like him

@jeffreybrooks8643

7 ай бұрын

Finnish

@petrimakela5978

7 ай бұрын

​@@jeffreybrooks8643He was definitely finished

@JBils41

7 ай бұрын

Authentic late 70s British Army porn ‘tache and sideburns… properly goes with the 68 pattern DPM Combat clothing and 58 pattern webbing… 👌

So you both now have a better understanding why militaries all around the world drill their soldiers to fieldstrip, clean and inspect their rifle whenever they get a chance to... 😉

@mikesmith3704

7 ай бұрын

Was going to comment something very similar. Much as I really like both Ian and Bloke's channels. The only problem those rifles have is lazy civilians 🙂

@mbak7801

6 ай бұрын

Plus the FAL/SLR was easy to strip and clean. Almost no stupid tiny parts to lose.

The SADF designated the FN-FAL as the R1 rifle, as long as it's kept relatively clean the issues don't get serious enough to disqualify it as a good, reliable battle rifle.

@petercollingwood522

7 ай бұрын

For the most part true. But I recall one of my teachers in high school who had taken part in the "Angolan campaign" in 66 saying that the R1 was crap in the bush, in comparrison to the AK which was consequently highly prized by the South Africans if they could acquire one. By the time I did my national service, 86, the R1 had already been replaced by the R4, which of couse is just a development of the AK in 5.56. I was never in combat though so comment only from hearsay from others who went before me.

@reneboone6776

7 ай бұрын

@@petercollingwood522 Sorry to correct you Peter, but the R4 was a licenced copy of the Israeli Galil 5.56 manufactured by Littleton Engineering works. Most "problems" with the R1 were to do with incorrect gas settings. My R1 had the gas port set at 1 (closed). At that setting, I never had stoppages. It kicked like a mule but was an extremely accurate weapon. The R4, which I used in the last 10 years of my total 30 year service was an ok weapon that was more suitable for urban warfare.

@petercollingwood522

7 ай бұрын

@@reneboone6776 I know what the R4 is. A licensed Galil, which was an Israli version of the Finnish Valmet, which was a Finnish version of the AK74 which was a development of the AK47. Youre the first I've ever heard who claimed the R1 was superior to the R4.

@lordsummerisle87

7 ай бұрын

​@@petercollingwood522 I expect most Troopies, like most troops all over the world, are far more worried about compactness, light weight, low recoil and large mag capacity (advantages the AK series tends to have over full-size battle rifles) than precision and power (notable advantages to the FAL/R4/SLR over most AK derived designs). After all most soldiers will be carrying their gat 100x more often than shooting it. That alone would explain the differing opinions about whether the R1 or R4 is "better" -- different definitions of "better". Clearly Reneboon valued the power and precision of the R1 enough to not mind a bit more weight, length and recoil. I expect he had a "busy" 30 years service.

@petercollingwood522

7 ай бұрын

@@lordsummerisle87 That could be. But the folks I heard complaining about the R1 were not complaining about it's weight. It was the problem with reliability in the bush and desert. Like I said. Although I shot both in the Army, that was only on shooting ranges. I was never in combat so all my "knowledge" is, as I said, hearsay from those that went before me.

The only time I had a failure on my L1A1 was when I put the gas plug in upside down

I did my service with the FAL both IMBELs and the original FN batch first purchased in the 60's, one day we took the old ones to the range to mark it those malfunctioning to be sent back to the armory, and lots of them indeed choked, the majority of the problem was in the old magazines, pristine domestic producted ParaFALs runned just fine, cant remember having a jam on those, this plataform is robust but they need some love to run good, especially with older parts.

@Manco65

7 ай бұрын

And magazines. Cracked front magazine hooks don't help things.

The sand cuts probably work better for sand. 😂 Moon dust is so fine it goes everywhere. It takes me about a year after deployment to stop getting crud out of my sinuses.

@509Gman

7 ай бұрын

I have an MA Tech rear sight that ten years on still has some Afghanistan in it.

FNC1A1 was the battle rifle when I joined the Canadian Forces. I didn't get to shoot it much after boot camp being an Air Force weenie, but it was a well-liked reliable firearm throughout its life with the CF. License built in Canada who did the bullwork in converting the piece to inch pattern.

@ndenise3460

7 ай бұрын

As the first to adopt it, the Canadian arsenals ltd. Helped H&R do the US version.....undercut by army politics and Springfield arms

@TzunSu

7 ай бұрын

As someone who used the Swedish license built copy of the FN FNC, i had to google what the FNC1A1 was, because i got super confused since i didn't think the FNC was in usage in Canada :P

@MikeSiemens88

7 ай бұрын

@@TzunSu Perhaps I should have used spaces between the letters FN C1 A1. We also had the FN C2 which was the heavy barreled fully automatic version with bipod.

@TzunSu

7 ай бұрын

@@MikeSiemens88 Don't think it's an issue for most people, few have heard of the FNC at all haha. Although this *is* FW, so those that do are most likely hanging out here :P

@jaredpeabody894

7 ай бұрын

Canada did Trial the FNC when they were switching to 5.56 however! But it eventually got beat out by the C7. There's footage on youtube of them being tested if such a thing spark your interests. @@TzunSu

Horrible that moon dust affects rifle reliability. :) Oddly, my Century Franken-FAL runs well. But I don't shoot in competition. It's a BSG upper parts, Bundes Heer lower, Belgian-style metric flash hider, and the Century receiver. Only issue was the mags didn't want to lock in place. A few strokes with a file on the mag catch took care of that problem.

@CyrusFreeman

7 ай бұрын

I had a Century FAL L1A1 thing... very reliable amd soft shooting. It got even softer when I chopped the barrel to 16".

During my military service in the early 80s, I fired thousands of rounds using the SLR rifle. Not once did I ever get a stoppage with it. It never let me down. Unlike the introduction of the SA80, which i found to be absolutely crap in its early days. The SLR for me was extremely accurate, i was the battalion marksman at the time and up to 600mtrs using iron sites it was very good. Occasionally, I would have the use of telescopic sights, which I loved using for those long-range shots. My kids loved me dressed in the Ghillie suit they used to call me the swamp monster. My personal opinion regarding the SLR was that it served me well, and i never had any issues with it at all.

We used to use pencil lead, run back and forth, to "lube" the FN bits for winter. Would that be of any use when bombarded by the moon dust, I wonder?

@STdoubleDs

7 ай бұрын

Graphite, or “pencil lead” is one of the main ingredients in modern dry lube. So it would be easier to spray some dry lube in there and see if that frees things up

@rockbutcher

7 ай бұрын

@@STdoubleDs True, but he was Infantry, like me and it's easier to write down notes you need with a pencil rather than a spray bottle of graphite. Saves on how much kit you have to pack.

@1977ajax

3 ай бұрын

Pencil 'lead' also has as its other main ingredient some form of clay. That's what holds the graphite together.

While my initial thought was it'd be interesting to see Ian's reaction after running a working SLR. I'm starting to think you guys doing a "secret Santa" load out brutality could be interesting

Absolutely love the "Ally" mustache and (not so) regulation sideburns, I feel like it gives a distinct tactical advantage.

I have used the FAL in the Belgian army for five years, without noticeable problems. We were warned, however, during basic training, to leave the magazine free (not to hold the weapon by it or rest it on whatever) while shooting to avoid feeding problems. For me, the FAL did its job well enough. When replaced by the FNC, the only improvements I experienced were the magazine capacity and lighter ammunition weight.

i served as a mountaineer in the Greek army. As a recruit ,I was issued a G3 and then a FAL when i was admitted in the mountaineers. I have also used M4 and M16 as a way to get familiarized with the weapons of our allies in NATO. I would choose the FAL any day compared to the other three, even though it's the oldest. The only precaution we took was using 28 bullets instead of 30 to prevent jams.

@AB-uw3os

7 ай бұрын

The FAL came with 20 round magazines. How did you manage to load 28?

@mikebaggott7802

7 ай бұрын

@@AB-uw3os 30 round magazines were available. When the Bren gun was converted to 7.62 x 51, it used 30 round FAL magazines.

@sonofnothing2714

7 ай бұрын

@@AB-uw3os Who told you that?It had both 20 and 30 magazines.

@TzunSu

7 ай бұрын

@@AB-uw3os Didn't you even watch the video? Mike is specifically talking about his 30 round mag in it.

@AB-uw3os

7 ай бұрын

@@TzunSu yeah he does, and specifically mentioned that those were for the NATO chambered Bren gun. Which makes the 30 rounder more of a hack job than a standard issue. Hence the question, for I have always seen it with 20 round magazines.

30Rd LMG Mags work fine with SLRs with no problems in my experience. Coupled with a cheap M16 bipod, it's a fine combo. Oh, and I didn't notice any mention of turning the gas up any time - solves so many problems!

I served in the Australian Regular Army and used the L1A1. Watching them use Ian's FAL I can see that he is not following the IA (Immedeate Action) procedure for the L1A1 which is 2nd jam turn the gas regulator down 2 notches. I would check the gas regulator plug to ensure it is functioning correctly as this happened to mine and had to be replaced (took seconds) as I was shooting single shots on the practice range due to IA's. Hope this helps as once fixed the rifle ran great with no problems which is their normal.

@BlokeontheRange

7 ай бұрын

I think there's a general lack of understanding how to use FAL gas in the US, similar to that with running Lee-Enfield rifles. Kinda out of their bailiwick so they don't use them properly and end up blaming the system for user error.

@smudgealdrin1512

6 ай бұрын

Remember IA's clear as day as a 16 yr old junior soldier .. Rifle fires ..Rifle stops.. Check mag ... Rifle fires , rifle stops .. Cant.. Cock .. Hook n Look for feed jams.. rifle fires one or two rounds & stops again.. open the gas reg.

@michaelguerin56

6 ай бұрын

@@smudgealdrin1512Exactly. The L1A1 is a great weapon to use but a bit of a pain to carry for hours at a time. Easy maintenance and bugger all parts for field strip. Super reliable.

I started firing the FNC1 in the CF starting as a Cadet in the 1970s and in the CF from 1980 until it was phased out by the C7/C8. Unbelievably reliable fire arm. What you folks miss is the difference between the Canadian magazines and the others. The Canadian Magazines, with their locking hook gave a much more secure mag seating than the European mags. Yu should check it out. We also had a body cover that was entirely open which also facilitated reliability. That body cover also gave us the ability to replenish the magazine with 5 rounds clips without removing the mag.

We are taught that each slr had the components eased the fit each rifle. Part of the cleaning drill was to check the serial numbers match (you had not picked someone else's part while cleaning)

@ndenise3460

7 ай бұрын

The numbering in the bcg/bolt is more for headspace. Otherwise should be fine to swap parts

About a hundred years ago I bought a Springfield armory import SAR 48 Israeli heavy barrel FAL new for $850 US. That rifle was the most comfortable and reliable,never a hiccup. Later I put a Tri lux SUIT on it and it was quite fun. Alas I had to sell it because of financial problems and have regretted ever scince.

I have an 80's Belgian manufactured FAL Para. It has been the pillar of reliability for me. I bought a bunch of Israeli surplus mags back then and have used them ever since. I keep it well cleaned and lubricated. I just don't have any issues with it.

@jonathanbennett1411

7 ай бұрын

No jams in my 50.63 either. Of course I didn’t expect any with what I paid for it!

I'm sorry but what in all hell was that Absolutely BEASTLY thing going-off in the background during the first minute of the intro?

For once, something I can speak about. The FAL is my favorite rifle (so biased off the bat) and I've owned 6 of them, here's a long rundown of my experiences. The first was a 2016 DSA SA58 Para 16" Congo, and it was a crapshoot whether it would run or not (I believe some significant QC issues at DSA, which may have been resolved). It ended up having to get warrantied for a poor chamber chamfer when it was obvious it just wouldn't work, got it back, seemed to work fine, and I stupidly traded it for a DT MDR in .308. The next was a G1 complete parts kit build on an Imbel Type III receiver, not only did that one run 80% reliably but it would occasionally double, so while a very pretty rifle with all wood (and the coolest flash hider), also sold. Next I got a complete Rhodesian parts kit build on a (bleh) Entreprise receiver, which I had little faith in but got it for absolutely nothing. It has been more or less completely reliable, albeit the receiver has a VERY loose magwell and the jams I have gotten are all mag fitment/feeding related. Still have this one, although I could triple my money if I chose to. Next was a 21" DSA SA58, somewhat pieced together as it had a Type II receiver but Holland rear sight/different colored lower. Shot reliably, bought it for the 6 25rd and 30rd mags, sold it. Next I got an early DSA SA58 18" on a Type 1 LMT receiver, also bought as it came with an Aimpoint and two dozen mags for practically free. My friend has it now, never had any issue, and it's surprisingly accurate given typical FAL accuracy. Finally, I have a DSA SA58 Para 16" on a Type 1 LMT that was apparently bought with every loaded feature by someone in 2007. It has been dead reliable and fits every mag tight, even with steel cased ammo (yes yes unsupported chamber I usually run brass). The plan is to SBR it into the dumb 13" OSW pattern, as all that's needed is a barrel swap. Overall, in my experience mag fitment is the major cause for concern, as the FAL tends to keep somewhat sealed (and if using a traditional topcover, like the AK can be quickly remedied). I personally favor it for the ergonomics and mild recoil over the G3, but have always gone by the idea that the FAL is a professionals rifle while the G3 is a conscripts rifle, both excellent in their roles.

"Quiet, you!" - Ian McCollum Words I never thought I'd hear uttered by this man. It made my day.

@stevetheduck1425

7 ай бұрын

That's such a standard reply here in Britain, I am certain he can now be officially made a Brit.

Fully expecting to find Karl Kasarda in the comments explaining how the AR15 is more reliable than death and taxes…

4:35 -Where's the forward assist? -*Furious Ian sounds*

I carried an Australian L1A1 SLR for about four years. Only ever had two issue, one of which was self induced. The first was that the gas spring lost it 'springeness' part of the way down the gas rod. The second was when I was dismounting from an Australian Army M113 APC. I was first out the door and as I exited and turned to my left the flash suppressor engaged with the hooks for the tailgate. The people behind kept exiting the APC and my rifle barrel bent to 45 degrees midway down.

"Where's the forward assist?" "QUIET YOU"

i built a FN FAL out of SA parts and a US receiver. back on the late 1990s once i had the gas port adjusted, it ran like a swiss watch. id gladly take an FAL to war.

Prospective FAL owners can now be hopeFAL of getting a reliable rifle! 😃 ... I'll see myself out now.

Was On The British Army, 1960 - 1964, And We Were Using Graphite Grease On Our SLRs Way Back Then.😊

Loved my SLR. BTW NICE Dukes Capbadge.

The SLR was my first rifle in the NZ army. Lovely to shoot and reliable if used properly. When visiting US personnel tried them they had a tendency tonride the cocking handle forward while we always were tought to let it slam home to ensure the first round was ready to go. Correct gas setting and adjustment as required was also important. Personally I really enjoyed using it and was sorry to see it go as were most of my contemporaries.

At last. A decent set of moustache and sideburns. Now, that is proper gear, gives off the the adequate air of a respectable serviceman... or a private military contractor... at any rate, kudos for the looks. Cheers.

I made my military service with the G3 and agree 100% with everything

Could the problem be metric vs inch pattern? the only issue I had with the SLR was with knackered mags with poor feed lips, not the weapon itself, btw, there was an unofficial solution to the dust sticking to oil problem that you could pick up in your local gunshop, it was called dri-slide not sure if they sell it anymore.

@chaimafaghet7343

7 ай бұрын

The problem is receivers being carved up with the gas axe.

Fired L1A1s between 1976 and 1986. Also the L7 Bren metric conversion. The ones we had for qualification on a 25-yard range late in my service were utterly worn out. Mixed plastic and wood furniture, no two carrying handles the same, rattled when shaken. Never once had (good or bad rifle) a single occurrence of failure to feed, failure to fire, or failure to eject. Had a flash hider peel like a banana, had one rifle come open at the latch while firing due to recoil; unloaded, checked it, reloaded and went on. Only problems I ever had at any time. The major thing I've seen with people trying and failing to shoot one of these is too little gas. Whatever the gas regulator has marked on it, go up halfway, if it fails to eject, give it more gas. If this keeps happening, turn gas regulator to zero, and charge rifle by pulling cocking handle, get it to an armourer if still alive. ;-)

In the late 70s I was issued a new plastic furniture L1A1 which would not cycle regardless of gas settings. I was told this is because it was new and the problem would go away. In later years I used various L1A1s and never had an issue so I tend to believe the issues with the first SLR were temporary. I still have a soft spot for the SLR. It really was beautifully simple.

Almost like firearms that have become extremely popular worldwide tend to be pretty darn good Excellent show as always

Bloke on the Range is wielding Britain’s most powerful weapon, a moustache. The SLR isn’t bad either.

@BlokeontheRange In my 20+ years of use of the L1A1 I never had an issue (past incorrect gas regulator setting). It didn't matter whether it was dusty, desert, snow, temperate or jungle. The key is proper maintenance which civilians seem to fail at always. After a days shooting, clean and heavy oiling. Next day, clean and light oil. Magazines only need to be clean.

As far as problems with the feed from the L4 magazines as mentioned, the Aussies successfully used the L2-A1 Automatic Rifle in the Vietnam War as a ‘floating’ LMG to supplant the M-60 GPMGs. The L2 mags had a straight body of 30-rounds capacity, but the rifle of course could accept the L1 20-round mag and the L4 30-round mag from the 7.62 Bren gun.

I notice the guy shooting Ian's FAL did not carry out the correct IA drills for the weapon system "weapon fires weapon stops cock hook and look!" and all that good stuff. When we carried the L1A1 on operations I seem to remember common practice was to set the Gas regulator to maximum.

Lubrication and failure to use the adjustable gas block to add a little more gas into the system.

Like this format collaboration !

Nice 70's "Tour Tache" there Bloke!!!!! Takes me back 40 years!!!!!

a greatvideo and rifles.have a good one.

Amazing content.. seriously I wish I could be there and buy you both a pint( or two). I am so damn frustrated though as a US L1A1 owner. We can't help the "kit build" situation and we get inferior rifles as a result. Mine was an Imbel made receiver on Enfield ( 1958) parts kit with the yellow MADE IN CANADA markings...and I keep looking for something to replace it. Faffing about with AR-10's has proven to be a parts nightmare and I have been trying like hell to find a way for the L1A1 to cycle the blue plastic DAG ammo...PTR makes G3 copies but I hear complaints now and then that have me worried. It's not ideal here.

@BlokeontheRange

7 ай бұрын

Oh, you won't make them cycle the DAG ammo, you'd have to get someone to machine you up a light alloy straight blowback breechblock and it would probably need a dedicated return spring.

@Sergi762

7 ай бұрын

Very true..The G3 rifle has that advantage but the same "kit build" plague is at play.The Irony is not lost on me, being a US watcher. Still...the hunt for a 308/7.62 Nato FAL replacement carries on. God bless you, noble sir.@@BlokeontheRange

@karood-dog3584

7 ай бұрын

The was a replacement bolt and carrier for the L1A1 to enable the use of blue ball ammunition.

@Sergi762

7 ай бұрын

I have looked for , on and off, 2 years, such a thing and havent found one. It may yet exists, but so far I haven't found any pictures or had the chance to buy it. Believe me; I am trying.@@karood-dog3584

@BlokeontheRange

7 ай бұрын

There's certainly one for the G3. I don't think there ever was for the L1A1 or metric FAL though.

"I am joined by...*drum roll*...GUN-JESUS!" :D - That's how you present Ian :)

Well, the G3 is an awesome rifle.

I like the new look bloke!!

"where's the forward assist?" This cracks me up.

Bloke looks like Ian Yule in the wild geese.

The AMBIANCE in this video is AWESOME!

HELLO AND WELCOME TO: i was briefly worried the Swiss finally snapped. But the audio did get better in fact, much obliged :)

I’ve got a personal FAL built from the FN imported lower and an 18” DSA upper. It runs reliably with near any ammo I put through it short of steel case. Easily over 3k rounds at this point. It has developed a little reciever slop, but a tiny cloth shim is enough to counteract that until a new locking latch comes in. Mine is non-sand cut, and it’s been suppressed more than a few times. The only real malfunctions it has are when undergassed, and it was mostly the bolt not locking open.

Isn't it jarring for us older blokes to see modern sight optics on a classic SLR ('Stupidly Long Rifle')? The mechanical musket is still a glorious thing. Thanks for a terrific video.

my dsa fal had problems when i first got it but after some smithing it runs great now even took it through my own version of a brutality match that my friends and i did

I had the subtitles on because of the background noise: Apparently 'cocked' is a rude word on KZread. But 'crap' is fine. And the FAL is 'foul'.

Was my service rifle in my first few years in the Australian Army as a grunt, apart from when I carried the M60 (which I loved). Never ever had an issue...even though the thing was a '63 and had been to Vietnam & back again (this was '83=85)...super reliable, hits hard and pretty accurate out t0 500m - sometimes needed more gas if it was wet and muddy, or had been fired a lot - that is what the adverse gas setting is for. We moved to Austeyr after that and apart from the hitting power and adjusting to different drills, mag loading, it was also an excellent rifle, which I used in different models until 2002 when I got out...

Oh the moon dust. I have a couple of instances in the Finnish defence forces when the trigger group on my RK62 jammed and couldn't fire a round. It was quite inconvenient when I had a full mag of training rounds (wood tipped) and no time to clean the rifle before cease fire was called.

Ian, you had me at the statement, “Even if it’s stupid.” 👍🏻🇺🇸🦅🇺🇸👍🏻 Interesting video devoted to the FN FAL known as “The Right Arm of The Free World.” Love my Belgian beauty! 👍🏻❤️👍🏻

First rifle I ever bought at age 18 was a FN FAL 50.63 para (I'm 55 now), and it still runs just fine. I've never drug it through the dirt in any of competitions I've competed in though. Also, found that the South African surplus R1 ammo or Taiwanese M80 ball ammo is my most consistent ammo in the FAL. Surprisingly the R1 ammo won't cycle my HK SL7 roller lock rifle.

My two favorite rifles right there!

Shortly after my basic training in 1984, I bought myself a 1” wide wood-handled paint brush with natural fibre bristles. I shortened the handle with the saw of my Victorinox Farmer knife so that the brush would fit in a 20-round magazine pouch and then rounded the cut edges with sandpaper. I used that brush on my SLR L1A1, an M16A1, a crappy ‘brand-new’ Austrian Steyr AUG, an even crappier ‘brand-new’ Lithgow AUG and a Minimi. I have also used that brush on many of my personal firearms. Look after your weapon and it will look after you. Cheers from NZ.

The tash and sideburns take me back to the 70's ...

I have an L1A1 Sporter I built from a Canadian Parts Kit decades ago and it runs just fine with the proper Inch Pattern Magazines. Granted I've never subjected it to harsh dusty conditions. With Metric Magazines, it will run some of them, but it seems to matter who made them. Also, I only load 19 rounds in my 20 round Magazines, most of the time.

'WHere's the forward assist?!' made me chuckle

I had a Flemming-Converted Belgian FAL in the mid 80's. I quickly learned of the "Bang-Bang-Jam" reputation. It was "reliable enough" on Semi, but never really on Full Auto. After much pondering, I have come to believe that the bolt loses ALL of it's energy at the end of recoil, and relies solely on the spring to return the bolt to pick up a cartridge and back into battery. The sping just can't do it alone, so it jams midway through the resistance of the magazine be it clean, dirty, wide-open gas port, etc. A spring-loaded or even polymer buffer would add significantly more oomph to the retrun and provide better reliability, but no one has put up the money to go down that road. BTW, I am supremely delighted with the FN SCAR-H. The ergonomics are just a little lacking, but the accuracy, reliability and recoil management are excellent.

Downloaded mags was SOP for M16s for many years: 18 in the 20 and 27 in the 30.

I have two Century Arms L1A1s. One of their 1st rifles on the generic receiver, and a late production on an Imbel receiver. Both have run flawlessly. I've shot the snot out of both. Neither have ever choked. Glad I never bought a quality copy... haha 🤠

As much the FAL discussion is interesting, I almost want to hear more about what was up with the Saiga .308. I have some experience with reconfiguring one from sporter to proper AK style and had some interesting quirks to overcome when getting it to work properly. Once I even managed to get it to fire while attempting to engage the safety, much to the detriment of my poor thumb in the path of the bolt handle. Fortunately no permanent damage was done and I eventually got things working good enough for a range rifle at least. I'd still prefer to put it through more before I were to ever depend on it though, the trigger and bolt hold open still sometimes don't get along as well as they should, but I like having that hold open option, even if it it only a manual one.

I have used locksmiths dry lubricant in the past, its a beast to clean , but it does get the job done when you need it.

Informative and entertaining. Now, where can we find the M42 style field caps people are wearing?

@BlokeontheRange

7 ай бұрын

www.varusteleka.com

The L1A1 was the service rifle for my military career. It was reliable and accurate. Being part of the shooting team we probably put more rounds down range in one week than most did in 1 year. The rifle performed without issue, shoots where you point it and doesn't get fussy with what it's fed. We taped up the mag floor plates up to stop any risk of a spontaneous disassembly, but that was the only modification we made.

Maybe I might have missed it but I didn't hear anybody talk about adjusting the gas regulator at the base of the front sight, to increase the gas pressure

Moon dust you say? Fine moon dust even. Bust seriously thank you for the rundown. Look forward to seeing Ian’s video.

That magnificent moustache!!!

I had a FN FAL 50:63, and it ran fine with the converted L4 mags. Never had a issue. But then it was an authentic FN FAL.

I've never understood what Ian's been going on about with his FALs. My 2011-ish DS Arms StG-58 has always been dead nuts reliable. The only thing that can make it choke is a damaged magazine or that one time I had a dead primer on a 1980s Malaysian M80 ball round. Now I suppose I don't drag it through fine moon dust near as much as Ian likes to do, so maybe I'll try that when I'm in Arizona for New Year's. I don't clean it much, either. Hey Ian, any time you want to shoot FALs together, I'm game, especially if you're in Michigan. Open invitation.

My Rhodesian FAL is all bush war era parts except for the DSA receiver and I have had no issues with it at all. Double matching RA and SA serial numbers too.

I built my FN FAL on a DSA receiver using an StG 58 kit. It runs flawlessly and is amazingly accurate.

what is the best FAl currently to buy, not including pre-ban ones?

Its great that Ian finally has gotten to collab with Burt Gummer.

Bloke, aside from the great discussion.....the mustache is AWESOME. Please sport it more often.

Carried one in NZ Army , joined 1976, never had a problem with them. Clean weapon our mantra.

Mr. Ian, I wonder if the FAL's FTF was built on a Century receiver. They were problems.

You nailed it Ian, go two rounds light on the mag, insert mag with bolt locked back.

@luislongoria6621

7 ай бұрын

Sounds like my 1st AR. If anyone notices a nasty scratch on the bolt, that was me trying to force the bolt past the feed lips. The follower holding the bolt open really impeded my mag change drill until I realized you needed at least one round to close the bolt 🤣✌

The g3 is one of those rifles that would benefit from a forward assist because its incredibly easy for the roller not to engage and since it lacks any form of way to manually close bolt you end up having to remove the mag and run the action.

@kunicrossgaming

7 ай бұрын

Never saw that problem in any of our issued G3 but maybe that's because they had been 30 Years old and served 40+Generations of recruits or because we cleaned them 20x-100x the amount of time they where actually fired... (probably a gross underestimation on my part)

@nemisous83

7 ай бұрын

@@kunicrossgaming well a well worn G3 likely wouldn't have this issue as the locking surfaces have likely been polished clean by repeated use as well as springs loosening up etc. On the civilian G3's from parts kits, old imported G3's from HK and the PTR ones they have this problem. However I'm not saying you would want to do this but you cant simply press the bolt forward with your thumb like on AR since the rollers are under a lot of spring pressure.

@kunicrossgaming

7 ай бұрын

@@nemisous83 I've only seen issues when somebody tried to gently guide the bold forward... But if they chopped up our old G3 and Frankensteined them back together... The psg1 had that kinda but not quite forward asssist button to silently ready the weapon but never used that one.

@SonsOfLorgar

7 ай бұрын

Which is why the Swedish variant of the G3, the ak4, got vertical ribs cut in a section of the bolt carrier that rests by the ejection port when the charging handle is in it's forward position so that a bolt that doesn't lock can be manually forced into battery. It is also trained to be used deliberately for "silent" loading at night or if in close proximity to unsuspecting opfor...

@nemisous83

7 ай бұрын

@@kunicrossgaming well forward assists contray to popular belief aren't really for closing the bolt with gunk in it but rather ensuring the bolt is seated properly because some rounds can be sticky or the bolt didn't have enough juice to chamber the round and lock the bolt. Most of the kit guns are pretty good the only thing that is new is the stamped receiver. However they usually refinish the parts which tend to ruin the broken in feel which people like on surplus firearms.

Only time I got a miss-feed on an SLR was I was turning open the gas tap a click at a time to see how far I needed to open it to stop it cycling. Mission accomplished 😂

I had 9 years of Australian Army service, with the L1A1. I found it completely reliable, as did my fellow soldiers. Even if it got hot and dirty it would continue to run - you might wind the gas regulator down to give the system a bit more gas, but that was about it. Of course we would also do everything to keep the rifle clean, cleaning every day being the minimum standard. Letting your rifle get clagged up on a multi-day competition because you didn't clean it is an operator problem, not a rifle problem. BTW I also used the L2A1 a little and, while I was not a fan of some of its features, such as a rattly forend which didn't leave you anything to hold when deployed as a bipod, the 30 round mags gave no problems. I can't speak for the L4 mags - I only used that gun in Cadets, and never tried the mags on an SLR.

@user-og1ux8nr3i

7 ай бұрын

When I used the rifle at Camp Borden, it’s a dust bowel, I never had an issue or did anyone around me.

A friend of mine carried an FAL in combat in Rhodiesia and it never let him down. Heat, dust, mud whatever.... he swears by them.

Well... In the Portuguese airforce, back in my day as a recruit, the G3 i was issued ran flawlessly when i wanted to show it malfed, and it malfed when i needed it to run flawlessly, the thing had a mind of it's own, whether it was clean or not. This was back in 1990, i'm almost certain it saw service in Africa in the Portuguese colonial wars sometime in the late 1960's early 1970's, it was an old weapon, they all where and i loved it nonetheless!

I used FAL for few years In Irish reserve just as they were being phased out they were pretty beat up and over cleaned ,over disassembled but very reliable have a good reputation among my contemporaries.

"if you don't know Ian McCollum, what on earth did you search to find my channel?!"