Well done Terri, there is no substitute for listening (and watching via KZread) to the words of wisdom, experience and knowledge in action. Your commentary as always explains in great detail the actions involved, and the reasons, that is also important, easy to say .. do this .. do that .. but the why is an important part of learning. Well done, I will eventually understand dual rate .. still a bit of a strange concept .. I don't know why ?? hehe

Well done Terri you have explained the set up procedure so that even a dinosaur like me can understand how to do it. Excellent, I will be using the video for reference when the time comes with my build. Cheers,Pete.

First time i see the i6x sub function in action. It really blown my mind 🤯

Thanks i can learn your video

Well Teri,you are Wilde. Thank you very much for the video, explanation is second to none. I finally have my Grand hauler all worked out and working amazing. Like Peter said,I'm also a dinosaur lol. 🦕

@TeriWilde

2 жыл бұрын

Glad it was helpful! 👍

Awesome! Explained so simply You have mad mine make sense Keep the videos coming

Brilliant , thanks yet again Teri

Brilliant tutorial Terri thank you 👍

@TeriWilde

2 жыл бұрын

Glad it was helpful!

You're the best!!!

Thanks mate 👏👍🥃

Hi. I went through the set up (my first MFC-01) as per your instruction. Great My situation is, that as I go through the motions with the sticks, the truck turns off as soon as I activate one. Any suggestions//?

@TeriWilde

14 күн бұрын

if it shuts down when you move the steering then the issue would be the servo. the MFC do not like HV, Hi-Torque and very cheap servos, I always use a standard 4.5kg Futaba servo such as the S3003 or the newer Futaba S-U300.

Terri can you tell me where to get the 2mm roll pins to fit the return setup on the Flysky fs i6x

@TeriWilde

10 күн бұрын

@@JohnAttwood-u6s I got them from a local engineering supplier.

Hi Terry, your videos are a great help, I have FRSKY Taranis transmitter and I am hoping this will be the same procedure. Have you used a FRSKY transmitter with Open TX and setup a MFC with it?

@TeriWilde

Жыл бұрын

I haven't used a FRSKY before. The set up should be the same and the Dual Rate should be set at 75% - 100% for the two channels that control J6 and J7. It's always good to identify which Channels are operated by the Sticks because I found that they can vary between brands.

@iancole4322

Жыл бұрын

@@TeriWilde Thanks Teri, I am still getting my head around the FRSKY and Open TX. It does look very similar to what you have done on your TX. I have MFC's in most of my trucks and I use a DX6i but I recently bought a FRSKY Taranis. I have got my head around using it and I think I am now at a point where i can programme it ETC. I set up a Beier SFR1 using SBUS so I must be doing something right. Anyway I want to swap all my trucks over too FRSKY and that search led me to your videos. I cant tell you how much they have helped even when I was setting up the DX6i. Keep up the good work, I think most people out there will be lost without them.

Bonjour Teri merci encore pour votre travail qui est très apprécié j’ai programmé ma Fly Sky FSI6X avec les vitesses sur la l,interrupteur 3 position j’aime mieux que sur le stick il me reste un petit problème sur les clignotants il fonctionne sur l’éclairage mais j’ai seulement dû son seulement du côté gauche quand je vire à gauche et à droite seulement la lumière pas de son à tu une idée du problème mes salutations du 🇨🇦

@brunouzelac365

Жыл бұрын

bonsoir, si c'est pas trop tard....🙂même problème que vous, recalibrage des manches, puis suivre la procédure avec le réglage du sw1 le trim a fond ! pour moi après manip ...plusieurs 😞cela fonctionne au poil .

HI TERRI, SAW YOU LAST LYDE GREEN TRUCK CLUB, I HAVE BEEN TRYING TO SET UP A FLYSKY FS-I6, TO MY MAN LOW LOADER .I DONE EVERY-THING, SHOWN ON YOUR VIDEO, BUT IT FIRES UP MOVES FORWARD, SOON AS YOU TOUCH THE STEERING IT STOPS, THEN RESTARTS, I DONT KNOW WHAT TO DO, I WONDER IF YOU HAVE ANY IDEA WHAT IT COULD BE ,MANY THANKS, SEE YOU SOON .Ray .

@TeriWilde

Жыл бұрын

Hi Ray... the first thing you need to do is bind your receiver to your radio with all switches and sticks in the neutral position, that would be knows as Fail Safe. then go thought the calibration process. I will be at Lyde Green at the May Meet so if you're still having issues I'd be more than happy to help out.

@missnhit

Жыл бұрын

@@TeriWilde HI. TERI. THANKS FOR GETTING BACK TO ME, I WILL TRY AGAIN, WHAT YOU SAID, BUT I HAVE DONE ALL THAT, SO I MIGHT WAIT, FOR THE MAY MEET, AND I HOPE YOU CAN HAVE A LOOK AT IT FOR ME. MANY THANKS AND HAVE A GREAT DAY. CHEERS FOR NOW. Ray.

Hi Teri I have a Mfc-01 which is doing something I can’t seem to stop. Is there another way I can speak to you about it, I’m in the uk. Thanks Paul

@TeriWilde

Жыл бұрын

you can message me on FB messenger if you want.

@prw1958111

Жыл бұрын

@@TeriWilde Hi there, I can’t seem to find you on Facebook 🥴

Hi Terri i have a problem with my mfu01 im using a planet t7. I turn on transmitter it starts up. I then push in the button engine turns off and light keeps flashing so i cant go through the process can you help please. I have also tried a t5 as well but just the same. Thankyou.

@TeriWilde

Жыл бұрын

Planet T5 and T7 radios seem popular but are very old tech, I would recommend upgrading to a digital radio that has dual rates.

@user-oj9zg8zy2n

Жыл бұрын

@@TeriWilde i have tried a flysky with same results

When I power the truck up. The transmission turns very slow in the idle stage an control sticks are in center position. Don't know what to do to fix that

@TeriWilde

2 жыл бұрын

You would need to Bind your transmitter with the receiver with all sticks and switches in neutral position. If your using a esc you need to calibrate it so it knows you neutral and end points. The MFC needs to be calibrated also.

Hi terri excellent video helped me huge....but i have no throttle i followed your steps and every thing works but no throttle before i watched the video it was working but no lightd or horn ...now they all work but no throttle

@TeriWilde

Жыл бұрын

Does the engine rev when you push the throttle stick up?

@glynnjohnson3818

Жыл бұрын

@@TeriWilde no it doesnt

Does the shift servo come in the kit

@TeriWilde

2 жыл бұрын

No, the 1/14 trucks kits only come with a motor, unless you buy a package deal, and then you'd only gey the cheapest options. You're always going to be better off buying good servos and radio separately.

Could you link a servo to a SWD for example too have it to work like a on off so you could have the fifth wheel so it could be open and close manually?

@TeriWilde

2 жыл бұрын

yes, With the Fs-i6X; you could use SWD to operate a 2 position servo for the 5th wheel.