Hey buddy, I hate how tight everything is in side the cab. The speaker takes up a ton of space so I was bored and found this! The amplifier is $13 for 200 watts peak power and I power it using a regular 7.2 or a old school flat 9 volt battery. To get the sound to come through the custom speaker box, instead of wiring the speaker that comes in the MCS package just wire the speaker box you made! I included the link to the video showing you how to build the box ( I used the white foam board and not wood ). kzread.info/dash/bejne/Y52bq9asfNLNiJM.html

@AmazingRCstore

Жыл бұрын

Thank you!!🔥

Terrific I have that same radio with my tamiya grand hauler already programmed for me lights and all. My only issue, I was trying to Bind another receiver on the Trailer for remote lighting but i can't seem to get it to work without knocking out the Bind of the Truck. Do you have a video on or can you tell me how 🤔 we can have 2 receivers bound.

What a very useful video~!!👍😁👍

hellow my buddy how are you awesome video thx but i have question i have same this radio control on my rc earth mover 870k wheel loader i use battery 3s 2400 mAh 35c but when the battery is weak and the pump stop work the battery still full on my radio screen she need program but i don't know how even the alarm is not working when the battery low i don't know how can i programing her in the RX set up ? high volteg.? alarm.? low.? i hope you help me how thx again my bro excellent video thx

Cool video though

HI ! Can you share the radio setting for truck ? and is that the stick need to do any modification ? thanks

Dix you make a video whit sound lights etc...?

very nice but you forgot the horn lights and turn on and off engine. i cant find how to make it work..

@francisroy8716

4 жыл бұрын

Same for me...I don’t know How?

Cuanto cuestan las llantas para trailer escala 1:14

You don’t have a problem with both throttle and steering on the same stick? I bought a Capo JkMax 1/8 scale Jeep JK rock crawler .. and had it built for me. It’s a complex rig and uses 8 channels .. so they included the I6S as the transmitter .. but they put both throttle and steering on the right stick .. and it’s very hard to rock crawl smoothly with fine slow throttle movements and steering on that one stick, they put the winch control (which rarely gets used) on the left stick of all places 😡 Obviously the guy that built the rig is not a rock crawler or even a trail guy with that setup. So how do I get my throttle on the left stick .. can I reassign it from the transmitter .. or do I have to start pulling plugs from the receiver and start moving things around? Would you be available as a paid tutor either via Skype or FaceTime to help me get this setup right? The I6S instructions are no help, and I’m new to both the I6S and twin stick controllers in general, and I have a pretty low IQ 🙄 lol. Thanks!

you didnt show anything on how to set up the radio !

OK why are you putting the gear shifting on the left stick with the throttle. Yes that is the set up with a 4 channel radio, but you have a 6 channel radio with more functions. Put the Gear shift on channel 5 and assign it to the three position switch. Now you can switch gears with the switch and it wont bounce around like it would on the self centering stick. Same with your sound control, put that on channel 6 and assign it to a two position switch. You also did not cover the throttle curve function where you can reduce the jumpy throttle starting out. There is also expo to help make SMALL steering adjustments at center stick. Some much to this radio and you covered none of it.

@boostjunkieMike

6 ай бұрын

Great ideas, help me alot. Thanks👌🏾😎👍🏾👍🏾