just done my flysky fs i6 about 20 minutes not bad for 70 years old thank you for a great video

@TeriWilde

4 ай бұрын

I am pleased to have helped out 👍

Thanks for the video mate, I use Flysky on all my RC excavators and this mod is a must, as operating without this is a real pain, as the bucket dipper arm, keep running on if not centred....

@1tonysgarage

17 күн бұрын

I’m using it for a bucket loader

Good afternoon Teri, thank you for the great video, even though I couldn't hear you, I watched your video step by step and now my FS-i6 works the way I want it to. 😀

Hello. Thanks a lot from India. You explained it so well! I performed this in my fs i6 and it really worked! Just subscribed!

@TeriWilde

6 ай бұрын

I'm happy it has helped you. 👍

Teri, I did this a couple of hours ago…let me tell you, I wouldn’t have even known where it all went, let alone actually do it but for this video, thank you so much. I started my first tamiya kit this week, a scania r620 1/14 scale with mfc 03, I know this series is for the king hauler and slight differences between the two eg steering servo placement etc, but it has been invaluable. Finished the gear box last night too so watching your mfc install and radio set up eg setting end points will keep me on the right track…honestly, I’d have been lost without all these vids…probably will be with them lol Anyway just a thanks to let you know how important these tutorial type vids are..thank you!

@TeriWilde

2 жыл бұрын

I will be at some point doing a Euro Truck build, I've had a MAN XXL under the bed for 6 years and I think it's time I built it. I will be doing the steering mod to it as well as the transmission build due to it having a very slight difference to the King Hauler, and I'll also be doing the close up on the false wall/MFC fitting. I'm glad they're helping you out, it's what it's all about, we help each other and enjoy this hobby. feel free to email if you need any help with things I've not covered yet 👍

@DaleLadDaz

2 жыл бұрын

@@TeriWilde oh that will be fantastic to see you do a euro build, I will look forward to that one…6 years though without building, that is supreme self control lol. This will need (I want lol) to do mods in the future eg steering etc so plan on tinkering with this kit long after it is initially built, adding light bars and stuff. I don’t have the history or experience with modelling/rc so it is all brand new but getting stuck in with the help of vids like yours will all build up knowledge. Thank you very much for your kind offer of email assistance, Very much appreciated…if I get intractably stuck I shall drop a message off… thank you and all the very best

Thanks for the video Teri - the newer spring kits come with the fatter pins. The one I used had a number D265800000 on the bag.

Thank you kind sir for the clear & precise instructions. My kit (luckly) had the correct dowels.

Excellent, thank you.

Brilliant Video just done mine while watching this many thanks

Fantastic just done my new radio ready for my hydraulic excavator cheers.

Very informative and competent as aways, thanks. Interesting to see your Maplin pliers .. hehe .. the good old days, shame they disappeared, a wealth of components, such a shame. But life goes on.

3d printed the parts, bolts from a nail, spring from a pen. easy peasy

@TeriWilde

9 ай бұрын

whatever works for you 👍

I liked the video As your camera angles in the video was great

@TeriWilde

2 жыл бұрын

I try to do the video angle as though you're sitting next to me... thanks for the positive feedback 😀

@wizard2394

2 жыл бұрын

@@TeriWilde you basically helped me to fix my broken fsi6 as it's spring had just slipped out of the hook Great video dude keep it up :)

Hi Teri, great videos really helping me get ready for when my FS-I6X arrives. Just wondering what length did you use for the 2mm pins.

Hi, very good video. Where can I get the Big pins from

@TeriWilde

27 күн бұрын

I got them from an engineering supply shop in Sheffield.

Informative video! I know nothing about RC transmitters but I am needing one to control my homemade RC excavator, is it possible to use the throttle function to control a servo on this? And use one of the rotary switches for an ESC for the pump? Any advice would be greatly appreciated 👍

@TeriWilde

Жыл бұрын

you can use the throttle channel to operate a ser if you wish. and you can use a VR rotary knob to control the hydraulic pump speed.

@jameschaffe694

Жыл бұрын

@@TeriWilde I’ve also watched a video saying you can twin a function to bring pump in same time as you move servo, very interesting stuff!

@jameschaffe694

Жыл бұрын

@@TeriWilde kzread.info/dash/bejne/nXl6uc6HZqzJk5c.html

So will this make my throttle have forward and reverse? I’m using this radio for a bucket loader.

@TeriWilde

17 күн бұрын

@@1tonysgarage yes, the esc will have forward and reverse and the radio will be fin.e

@1tonysgarage

17 күн бұрын

@@TeriWilde thank you very much

Hi Teri I like some of the previous comments first watched the American guy do this modification and was more confused after watching Thank you for an accurate tutorial and fantastic camera angles showing everything that needed doing close up and crystal clear 👌 One question Where did you get your Transmitter.....am looking for a reliable source to purchase one Thank you Geoff P 👍 🇬🇧

@TeriWilde

Жыл бұрын

I got the Fs-i6X from eBay. I just filter UK seller and priced Low-High because some sellers are asking £75 and some only £45.

@geoffpeacock514

Жыл бұрын

@@TeriWilde 👍

Where can I get the larger roll pins for the fs i6x radio

@TeriWilde

27 күн бұрын

I got them from an engineering supply shop in Sheffield

Hi Terri, great video and well presented easy to understand, thumbs up. I'm new to all this Truck stuff and tried to send you an Email but it didn't go(I used all lower case to the email address at the bottom of your video). Never mind I'll keep trying. Regards, Pete.

@TeriWilde

3 жыл бұрын

Hi Pete, when emailing me, have you put the dots in? Teri(dot)Wilde(dot)RC@outlook.com... I have tested it and emails are coming through ok. I'll be happy to answer any question you might have... Keep trying and thanks for watching, Teri.

Do you know if that kit fits the Flysky T6? Or can i just swapp the gimballs arround?

@TeriWilde

2 жыл бұрын

I don't think you can swap the gimble because the wires are in a different configuration... the gimble do look the same as the i6s and i6X so it's highly likely the spring kit will fit.

Hi there just wanted to ask here can I get bigger pins for my fly sky 10 channel receiver please let me know how to get them. Thanks

@TeriWilde

Жыл бұрын

I'm not sure what you mean by "bigger pins for your reciever"

Hi Teri, tried emailing too but was just returned. Anyway, silly question but im wondering if you could provide search term for the larger dowels? I know you can’t provide a link so if i can find the pins im good to go… thank you

@TeriWilde

2 жыл бұрын

I got the extra pins from eBay, I searched for 2mm x 8mm Parallel Dowel Pins.

@DaleLadDaz

2 жыл бұрын

@@TeriWilde sorted the email thing (as you know) thank you Teri, id be lost without people like you who know what they are doing!

Wondering what my Quadcopter will do after this mod is done will it try to rise or stay till I push up??

@TeriWilde

2 жыл бұрын

I wouldn't use the self centring for multi rotor or planes

@tonesdrones7395

2 жыл бұрын

@@TeriWilde I have a gps drone it's not a racing drone apm2 2.8 flight controller nothing crazy im wondering if it will work if you know anything about it please let me know thank you so much!

Hi Teri What size dowel do I need for a fs-i6x??

@TeriWilde

2 жыл бұрын

The Dowel Pins I got for the FS-i6X are 2mm x 8mm which were slightly bigger than the ones supplied in the return spring kit