Sean and Todd teaming up with Metigulous! Gonna be some badass work coming out of this shop.
@esvs93952 жыл бұрын
Bro, you got Sean and William working for ya, so please get more videos out
@SirVic422 жыл бұрын
More of the beauty welds that you do for customers would be great content. And, of course, more Lucy & Jupiter!
@bcg462
2 жыл бұрын
I agree showing some of the work you do for other customers would be better than not doing anything
@ChaosAura2 жыл бұрын
Im a rotary guy at heart, So I always cry a little with swaps like this, but at the same time, I always love seeing a FB go fast. Love the car man, I look forward to seeing how fast you're able to push it.
@Dan-mu5oy
2 жыл бұрын
i would be less annoyed if he had put a diesel in it!!
@fopeezy30972 жыл бұрын
"What do you guys want to see?" I appreciate any and all fabrication work being shown.
@9mmSurpressor2 жыл бұрын
Title in the notification confused me but then I remembered who’s channel this was
@Jcarney87
2 жыл бұрын
I know… dude doesn’t post vids ever
@jeffro38911
2 жыл бұрын
Don't worry Dutch, he's got a plan.
@tyler2382 жыл бұрын
I can’t wait for you to race Kyle lol
@rexxx9272 жыл бұрын
Just heard the news congratulations Hayden! fabs reunite welcome Shawn and Todd this should be exciting...!
@sporenerddadada2 жыл бұрын
Bro I’ve been watching you since for ever!! Alls we want is content you could show us customer builds or what ever. I like the content you produce and will continue watching until KZread dies or you quit
@Brock_Landers2 жыл бұрын
Also, I'm pumped to see how the build goes with the aluminum block. I'm willing to bet this RX7 (and I owned an 84 with an 11A), is going to soon run 8s or maybe even 7s!
@bloke_from_newzealand4562
2 жыл бұрын
12a*
@WickedPaint2 жыл бұрын
This car is looking so good and can't wait to see you pull it out next season! Make some welding videos in the meantime!
@bambino960152 жыл бұрын
Just more consistent videos. The content is always there. You just have to take the time to film and post it! Love the vids as always brother!
@joshs1992 жыл бұрын
Thanks for dropping a video. Always love the updates on the 8 rotor. And Kyle hasn't put out a video in a week. And Brent has been cranking out Sho Nuff videos but didn't put one out today. So thankfully you did. 😁👍
@mikeyacullo2 жыл бұрын
Car looks awesome with those big ass slicks an skinnys up front
@Backupnow-gf7wb2 жыл бұрын
Dude please upload more, 👍👍👍👍👍👍👍👍👍
@ceezk24ep32 жыл бұрын
Cars looking and sounding amazing bro take your time it will all come together
@emery9082 жыл бұрын
Adding Shawn is huge. I hope to see more of your channel.
@larsonaaron73722 жыл бұрын
Always doing clean work in a clean shop!!
@jameswil2 жыл бұрын
Maybe you could show us any fun welding jobs ya get in or any other customers work of they was cool with it, that would be decent winter content
@mikepelz70042 жыл бұрын
Its all about goals man😎. keep going forward!
@alastairdow-taylor41032 жыл бұрын
Stop fucking around chaseing perfection, time to get some time slips banked!!
@imdabeast1002 жыл бұрын
The Subaru classic. Glad you caught it as early as you did. Man I love watching you guys pfi and boostedbois when I cook
@MartinRodriguez-yr4gf2 жыл бұрын
You do great work. Love your attitude
@802Garage2 жыл бұрын
Wonder if there's a chance the piston got dropped or knocked against something or maybe if a ring broke the land when it was getting tapped into the bore. Either way, good stuff man!
@virginiomaldonado27462 жыл бұрын
Customer car builds combined with your car!!
@dalebickham26662 жыл бұрын
Killing it Wyatt. Any vids are better than nothing
@chicagovasko2 жыл бұрын
Another great episode.
@danielhigley85432 жыл бұрын
You should go to Florida and build cooper's cage in Chip.
@colemurray72922 жыл бұрын
Excited to see this think move next season. I work in the solar industry, but aspire to open my own shop one day. With that being said, as an aspiring fabricator, I’d love to see you do some welding tech/education videos in the off season! I’d love to get some tips and tricks from a skilled welding vet like yourself. Might not be the most exciting for some I guess. But I’m sure the real car guys would appreciate
@CraaaigV3022 жыл бұрын
Be careful if you have water in the coolant system I know that you know your whole system will freeze up and that ain't good for the radiators or the motor
@bobgreene5460
2 жыл бұрын
Thinking the same . !!
@stevenlayne87442 жыл бұрын
Do not forget about treating your fuel before storing it put some stable on it and run it for a few so you don't want to go through and have to clean your injectors and all that crap when you bring it back out
@guidoheeling11792 жыл бұрын
If it sits for a long time it is good meassurs to pump up the tires a bit higher so they stay nice and round
@gabrieldorta50502 жыл бұрын
I want to see the work you do for customers, It aint got to be a very in depth video, just like, a 2minute build blog here and there
@j.brewer75522 жыл бұрын
Your custom jobs are fun to watch, also throw in some fun! For yourself. If you're having fun it comes through on the camera.
@l33b802 жыл бұрын
On my first gen, going from cast iron block to aluminum block raised my front end 1 inch on the stock front coil springs. That 100 pound difference is huge!
@aaronpanietz2 жыл бұрын
Show your work projects in the off season. I think that would be cool😁
@Caution.beware2 жыл бұрын
Happy New Year 🎆
@BassManBobBassCovers2 жыл бұрын
Meticulous Metigulous pays off in the end! Maybe do a compression test to see if that happened on any other pistons. Hopefully that issue has not replicated in any of the other cylinders.
@rsharney11112 жыл бұрын
You unlocked a new secrete. If there was a gnarly vacuum turbine on the block you could blow more air through the thing with the gap. Itll be more like a jet engine with your massive turbo.
@pratt1bp2 жыл бұрын
Take the battery out & keep it on trickle to be good for summer.
@josechavolla93072 жыл бұрын
Keep on moving forward and don’t look back
@makeitorleaveit12 жыл бұрын
I think Texas speed needs to sponsor you. You e got a great channel you help so many people and a Texas speed unit in there would be epic
@okobojian18602 жыл бұрын
First grandpa is fast. 🤣
@Todd9362 жыл бұрын
Keep it up Man U r awesome at what u do u will find a way to make KZread what u want and make a living at it just keep doing it.
@Brock_Landers2 жыл бұрын
Damn Hayden, I can't believe this thing made 990 whp on a piston with cracked ringlands! You definitely lucked out that it didn't warp or score the cylinder wall. I would've figured that you would've had to re-sleeve that engine.
@mrunyan182 жыл бұрын
What’s the build in the engine pistons and rods and heads? Love the progress
@Wreckedekcoupe2 жыл бұрын
Hell yeah brother
@rohanberry60152 жыл бұрын
Show some builds/work etc is always interesting fab work
@bryduhbikeguy2 жыл бұрын
Just keep on showing your Awesome skills.We'll be here.>98K !
@simond75822 жыл бұрын
resurrect Charlie's wago for snow drifts!
@OtitRabocse7172 жыл бұрын
Ayo my boi where you at ? We need more videos
@Jursaw2 жыл бұрын
More fab videos with detailed info
@mk-jf1ux2 жыл бұрын
give us a todd and shawn update video
@RaceBrosCarlos2 жыл бұрын
I’m here for the ideas but idk what you talking about Willis 😅😂🤣
@matt.p80602 жыл бұрын
Would you drain the water in the cooling system while its parked in the trailer so it doesn't freeze? or does it not get that cold there?
@SchofieldBrothersRacing Жыл бұрын
So I am building a 62 Falcon with a single turbo LS. I was thinking of going motor plates instead of solid motor mounts. If you go motor plates, how did you match the thickness of the motor plate and move the balancer out to keep the belt aligned? Awesome build and awesome car!!!!
@codywilliams25372 жыл бұрын
What’s going on with Sean and TwinTurbo Todd?
@AlmightyRem2 жыл бұрын
Now there isnt as much blow by will it need tuning again?
@legendary_perfomance2 жыл бұрын
You should take the RX-7 ice racing it would be cool because you would be one of the only people that got to make a pass on ice and the drag strip
@Thewatson772 жыл бұрын
It’s already been said but….just share some of the busy work you’ll be doing 👍🏼👍🏼
@allenl90312 жыл бұрын
If you are keeping it outside, did you drain the block???
@ELLeeOh2 жыл бұрын
Truck tires on the rear and some snow drifting shenanigans
@mattbauman2 жыл бұрын
Honda time! Get the CRX back together.
@LIF01102 жыл бұрын
When will you make a video introducing Shawn and Todd and will they do a tell all on why they left
@n20cpri2 жыл бұрын
Customer Stuff - Cages, manifolds fab stuff whatever dude post it up!
@GARAGEIdiotS2 жыл бұрын
Is that the iPhone 13 cinema mode? 😯
@MKEUnderground2 жыл бұрын
Please put a good aftermarket dampener on it, also single 90/10s will be fine for the front. You don’t need anything crazy
@skinnystr8nasty2 жыл бұрын
Mexico runs. Like the og boostboiz content that brought in all their subscribers.
@8valvestreetsociety0122 жыл бұрын
Is the ring gap big enough? Ring end run in is what's causing this
@CBRpaul2 жыл бұрын
I wanna see your customer projects
@tonyross73762 жыл бұрын
Let's go Haden
@bnmperformancefab2 жыл бұрын
Oh yea boi!!! That is nutty man, just means you got more eggs in your basket haha
@1clnsdime12 жыл бұрын
Let the rings get seated and it shouldn't have hardly any blow by at idle.
@alerobrahh2 жыл бұрын
I’m pretty sure you already know this, but I have seen this done in the past completely by accident, put coolant in it while you store it for the off season. Just my .2
@roberttuckerjr47182 жыл бұрын
What pistion and rods are you using? Are they stock pistons and rods or forged?
@xozindustries74512 жыл бұрын
The more oil you run the worse it is for the windage, it hurts power big time. Just call Moroso and get one of their pans. My buddies work there, they sell the cheap China pans but with their own pickups, and they make really good fabricated pans with full baffles. Watch the engine masters episode about oil control, they picked up big power just by switching to a Moroso pan, plus better oil control
@djwilson3282 жыл бұрын
Just wondering what ha e u guys done with Charlies old civic
@civicr871092 жыл бұрын
Just do u man, keep on doing what u do just record it, lol..
@andytbaynes2 жыл бұрын
Yo dude make sure you top up your coolant or drain the water as you don't want to crack your block while it's freezing in the trailer
@mikeyacullo2 жыл бұрын
Build some cool snow bikes or somthin. Engines. Tires or tracks lol go-karts. Anything that goes
@ak47adri2 жыл бұрын
Awesome
@1clnsdime12 жыл бұрын
Don't leave the shocks and springs with ratchet straps pulling down on them all winter.
@jamesmcivor3402 жыл бұрын
More regular content coming soon?
@kevinconaway44092 жыл бұрын
Miss your content bro
@v4yt1262 жыл бұрын
100k subs soon
@justicenedela85262 жыл бұрын
Got that discount tire torque wrench lol
@therig13392 жыл бұрын
Update.. where you at
@paullmight422 жыл бұрын
that setup looks so dope...it's almost a shame you have to put a bumper and hood on it lol
@bobgreene54602 жыл бұрын
Trying for a home in Colorado or Florida, just wondering??
@asian_makanic18052 жыл бұрын
What did you use to notch the pistons for the valve
@asian_makanic1805
2 жыл бұрын
Wake up
@marcmoore88532 жыл бұрын
Hi I want to purchase some docol r8 steel can you please advise me where I can order some thanks
@allenl90312 жыл бұрын
Shh, it's a cracked "rotor." 😏
@bradt92442 жыл бұрын
Is there coolant in the RX7? Ik it sounds stupid but racecar
@danielpeck62692 жыл бұрын
Your ECU will be fine in the cold, but it worries me that you said you're storing the car in your trailer. Trailers get stolen regularly. Please be careful with where you store it!
@joop1987
2 жыл бұрын
Put an airtag in the car and trailer to keep an eye on them.
@marvinthomas81652 жыл бұрын
We want to see content whatever that maybe customer cars is cool too
@michaelgoggin54302 жыл бұрын
Dam , smashed the ring lands cause Detonation looks like some of the WRX pistons I've seen. Dam you can hear audible Detonation it's not gonna last long and it will be the same problem pistons ring lands
@drew538322 жыл бұрын
Hayden we miss you lol
@belcebu59072 жыл бұрын
BLONDIE MAKES IT LOOK SO EASY TO PUT AN ANGINE BACK TOGETHER
@MinhNguyen-kn4ol2 жыл бұрын
Move to Florida
@richardwillcoxson61772 жыл бұрын
Even if you get some interesting customer work that would be cool to see.
Пікірлер: 183
Sean and Todd teaming up with Metigulous! Gonna be some badass work coming out of this shop.
Bro, you got Sean and William working for ya, so please get more videos out
More of the beauty welds that you do for customers would be great content. And, of course, more Lucy & Jupiter!
@bcg462
2 жыл бұрын
I agree showing some of the work you do for other customers would be better than not doing anything
Im a rotary guy at heart, So I always cry a little with swaps like this, but at the same time, I always love seeing a FB go fast. Love the car man, I look forward to seeing how fast you're able to push it.
@Dan-mu5oy
2 жыл бұрын
i would be less annoyed if he had put a diesel in it!!
"What do you guys want to see?" I appreciate any and all fabrication work being shown.
Title in the notification confused me but then I remembered who’s channel this was
@Jcarney87
2 жыл бұрын
I know… dude doesn’t post vids ever
@jeffro38911
2 жыл бұрын
Don't worry Dutch, he's got a plan.
I can’t wait for you to race Kyle lol
Just heard the news congratulations Hayden! fabs reunite welcome Shawn and Todd this should be exciting...!
Bro I’ve been watching you since for ever!! Alls we want is content you could show us customer builds or what ever. I like the content you produce and will continue watching until KZread dies or you quit
Also, I'm pumped to see how the build goes with the aluminum block. I'm willing to bet this RX7 (and I owned an 84 with an 11A), is going to soon run 8s or maybe even 7s!
@bloke_from_newzealand4562
2 жыл бұрын
12a*
This car is looking so good and can't wait to see you pull it out next season! Make some welding videos in the meantime!
Just more consistent videos. The content is always there. You just have to take the time to film and post it! Love the vids as always brother!
Thanks for dropping a video. Always love the updates on the 8 rotor. And Kyle hasn't put out a video in a week. And Brent has been cranking out Sho Nuff videos but didn't put one out today. So thankfully you did. 😁👍
Car looks awesome with those big ass slicks an skinnys up front
Dude please upload more, 👍👍👍👍👍👍👍👍👍
Cars looking and sounding amazing bro take your time it will all come together
Adding Shawn is huge. I hope to see more of your channel.
Always doing clean work in a clean shop!!
Maybe you could show us any fun welding jobs ya get in or any other customers work of they was cool with it, that would be decent winter content
Its all about goals man😎. keep going forward!
Stop fucking around chaseing perfection, time to get some time slips banked!!
The Subaru classic. Glad you caught it as early as you did. Man I love watching you guys pfi and boostedbois when I cook
You do great work. Love your attitude
Wonder if there's a chance the piston got dropped or knocked against something or maybe if a ring broke the land when it was getting tapped into the bore. Either way, good stuff man!
Customer car builds combined with your car!!
Killing it Wyatt. Any vids are better than nothing
Another great episode.
You should go to Florida and build cooper's cage in Chip.
Excited to see this think move next season. I work in the solar industry, but aspire to open my own shop one day. With that being said, as an aspiring fabricator, I’d love to see you do some welding tech/education videos in the off season! I’d love to get some tips and tricks from a skilled welding vet like yourself. Might not be the most exciting for some I guess. But I’m sure the real car guys would appreciate
Be careful if you have water in the coolant system I know that you know your whole system will freeze up and that ain't good for the radiators or the motor
@bobgreene5460
2 жыл бұрын
Thinking the same . !!
Do not forget about treating your fuel before storing it put some stable on it and run it for a few so you don't want to go through and have to clean your injectors and all that crap when you bring it back out
If it sits for a long time it is good meassurs to pump up the tires a bit higher so they stay nice and round
I want to see the work you do for customers, It aint got to be a very in depth video, just like, a 2minute build blog here and there
Your custom jobs are fun to watch, also throw in some fun! For yourself. If you're having fun it comes through on the camera.
On my first gen, going from cast iron block to aluminum block raised my front end 1 inch on the stock front coil springs. That 100 pound difference is huge!
Show your work projects in the off season. I think that would be cool😁
Happy New Year 🎆
Meticulous Metigulous pays off in the end! Maybe do a compression test to see if that happened on any other pistons. Hopefully that issue has not replicated in any of the other cylinders.
You unlocked a new secrete. If there was a gnarly vacuum turbine on the block you could blow more air through the thing with the gap. Itll be more like a jet engine with your massive turbo.
Take the battery out & keep it on trickle to be good for summer.
Keep on moving forward and don’t look back
I think Texas speed needs to sponsor you. You e got a great channel you help so many people and a Texas speed unit in there would be epic
First grandpa is fast. 🤣
Keep it up Man U r awesome at what u do u will find a way to make KZread what u want and make a living at it just keep doing it.
Damn Hayden, I can't believe this thing made 990 whp on a piston with cracked ringlands! You definitely lucked out that it didn't warp or score the cylinder wall. I would've figured that you would've had to re-sleeve that engine.
What’s the build in the engine pistons and rods and heads? Love the progress
Hell yeah brother
Show some builds/work etc is always interesting fab work
Just keep on showing your Awesome skills.We'll be here.>98K !
resurrect Charlie's wago for snow drifts!
Ayo my boi where you at ? We need more videos
More fab videos with detailed info
give us a todd and shawn update video
I’m here for the ideas but idk what you talking about Willis 😅😂🤣
Would you drain the water in the cooling system while its parked in the trailer so it doesn't freeze? or does it not get that cold there?
So I am building a 62 Falcon with a single turbo LS. I was thinking of going motor plates instead of solid motor mounts. If you go motor plates, how did you match the thickness of the motor plate and move the balancer out to keep the belt aligned? Awesome build and awesome car!!!!
What’s going on with Sean and TwinTurbo Todd?
Now there isnt as much blow by will it need tuning again?
You should take the RX-7 ice racing it would be cool because you would be one of the only people that got to make a pass on ice and the drag strip
It’s already been said but….just share some of the busy work you’ll be doing 👍🏼👍🏼
If you are keeping it outside, did you drain the block???
Truck tires on the rear and some snow drifting shenanigans
Honda time! Get the CRX back together.
When will you make a video introducing Shawn and Todd and will they do a tell all on why they left
Customer Stuff - Cages, manifolds fab stuff whatever dude post it up!
Is that the iPhone 13 cinema mode? 😯
Please put a good aftermarket dampener on it, also single 90/10s will be fine for the front. You don’t need anything crazy
Mexico runs. Like the og boostboiz content that brought in all their subscribers.
Is the ring gap big enough? Ring end run in is what's causing this
I wanna see your customer projects
Let's go Haden
Oh yea boi!!! That is nutty man, just means you got more eggs in your basket haha
Let the rings get seated and it shouldn't have hardly any blow by at idle.
I’m pretty sure you already know this, but I have seen this done in the past completely by accident, put coolant in it while you store it for the off season. Just my .2
What pistion and rods are you using? Are they stock pistons and rods or forged?
The more oil you run the worse it is for the windage, it hurts power big time. Just call Moroso and get one of their pans. My buddies work there, they sell the cheap China pans but with their own pickups, and they make really good fabricated pans with full baffles. Watch the engine masters episode about oil control, they picked up big power just by switching to a Moroso pan, plus better oil control
Just wondering what ha e u guys done with Charlies old civic
Just do u man, keep on doing what u do just record it, lol..
Yo dude make sure you top up your coolant or drain the water as you don't want to crack your block while it's freezing in the trailer
Build some cool snow bikes or somthin. Engines. Tires or tracks lol go-karts. Anything that goes
Awesome
Don't leave the shocks and springs with ratchet straps pulling down on them all winter.
More regular content coming soon?
Miss your content bro
100k subs soon
Got that discount tire torque wrench lol
Update.. where you at
that setup looks so dope...it's almost a shame you have to put a bumper and hood on it lol
Trying for a home in Colorado or Florida, just wondering??
What did you use to notch the pistons for the valve
@asian_makanic1805
2 жыл бұрын
Wake up
Hi I want to purchase some docol r8 steel can you please advise me where I can order some thanks
Shh, it's a cracked "rotor." 😏
Is there coolant in the RX7? Ik it sounds stupid but racecar
Your ECU will be fine in the cold, but it worries me that you said you're storing the car in your trailer. Trailers get stolen regularly. Please be careful with where you store it!
@joop1987
2 жыл бұрын
Put an airtag in the car and trailer to keep an eye on them.
We want to see content whatever that maybe customer cars is cool too
Dam , smashed the ring lands cause Detonation looks like some of the WRX pistons I've seen. Dam you can hear audible Detonation it's not gonna last long and it will be the same problem pistons ring lands
Hayden we miss you lol
BLONDIE MAKES IT LOOK SO EASY TO PUT AN ANGINE BACK TOGETHER
Move to Florida
Even if you get some interesting customer work that would be cool to see.