Thank you Derrick @SlowerThanU for Tuning the RX-7! metigulous.com/merch Insta: Metigulous Facebook: / metigulous
Жүктеу.....
Пікірлер: 152
@Metigulous2 жыл бұрын
WARNING THIS IS 100% CLICK BAIT BECAUSE IT MADE 991 HP NOT 1000 🤡 For anyone who actually cares. It’s a 5.3 with gen 4 pistons and rods. Summit dual valve springs. LS9 gaskets and China studs. VS racing 88/96.
@chicagovasko
2 жыл бұрын
Smart to keep it simple strong. Should be alot of fun.
@zethloveless7238
2 жыл бұрын
Haha fuck em if they care we love your work Hayden 🤘 been following since the start.
@Slowv8Fiero
2 жыл бұрын
What cam? If you care to share
@newtonfirefly3584
2 жыл бұрын
@Metigulous: Hayden, this build has been and still look pretty good. Sure it has been a process with time. You have many things going personally including doing work for others, which is essential to Your business too. Though the space is limited, perhaps You could say why You chose a single versus twin turbo, and a more conventional waste gate compared with using a electrical controlled one? Why would You use "China studs" ? not better like ARP or such, especially with a LS and 5.3 L ? Am not quite so familiar with all of the terms You wrote about this build. Is the last "VS racing 88/96" referring to the transmission ? You might consider using a hub dyno for refined tuning as many use especially Anderson Dick - Fuel Tech and others. Thus, also there are not issues of tires slipping, and more range of power to work with. in the previous vlog You mentioned about changing the shocks too. Was also thinking why is Hayden not going with some like QA1 or KW ? All The Best and Much Success in Your Quest, Health and Well Being. Sincerely An addition thought, especially for You, Hayden with Your welding expertise and experience. Because my thoughts, imagination, visualization, ideas may be more unusual, non-conventional, innovative too, am thinking, visualizing having any version RX-7 to be modified with and having a mid-engine placement (and many other vehicles which are conducive for such). The balance and weight distribution greatly improves launch, stability, power transfer to the hubs and wheels, handling (for road, track use). Some thoughts to consider, and if You would reply, am interested to know Yours.
@modmatt89coupe
2 жыл бұрын
so how much boost did it take? i am guessing 25 ish?
@__baggy2 жыл бұрын
Followed since the beginning, great to see the progression in not just the car, but the quality of your work. Top class.
@jafferm1938
2 жыл бұрын
Same man! Insane to see how far the car has come. Can’t wait to see it run a killer pass
@anthonygibbo1881
2 жыл бұрын
If anything man it's built nice and he cares about how it looks I mean the fab work is 👌🏾 and it's making good power for what it is who gives a fk wat anyone else think or say nice build hayden and happy holidays man enjoy 👍🏽
@Boostedlifestyle2 жыл бұрын
This is the right amount of power to run a low 8 in this car. Crank it up!
@okobojian18602 жыл бұрын
Hey can’t wait to see the track video? Keep it up Hayden fun to watch this build. Come a long way sense the first engine, the first turbo. Let’s get him to a 100k.
@trevorsmith92512 жыл бұрын
The car is a absolute credit to you, your welds are next level, this is gonna be spicy 🌶 on the track 💪🔥
@brendinmack78392 жыл бұрын
Sweet almost time to line up with the mr2
@dmnking2 жыл бұрын
Please keep posting, the rx7 hasn't reached its final form💪
@madmod2 жыл бұрын
If you ever in Okoboji, i need a turbo header for my 22r sand rail lol. Im just putting a v band on the stock manifold for now but ill be waiting for you to start doing Yota log manifolds.
@siccamade51502 жыл бұрын
Love to see regular uploads of this car, glad it's back in the spotlight!!
@B5S4SCHA2 жыл бұрын
Been following this build since day one. I actually have a 79 myself that I’m building, waiting for my terminator to ship out now. Running a bone stock 5.3 with the stock rear end, can’t wait to get the 8.8 and go for boost. Godspeed on your career!!
@parl97312 жыл бұрын
Cleanest build ever, can't wait to see this thing make a hit!
@ricardovargas34122 жыл бұрын
I’m just glad your posting more often !! Keep up the awesome work !!! #Progress
@allenl90312 жыл бұрын
Can't wait to see you make runs Hayden, and not get kicked out for no certified cage.
@allxdup19092 жыл бұрын
Real happy to see you get the RX chevin goin again. Its a gem, full of great craft. Its gunna be a lot of fun dialing it in and beyond. Congrats mate, you can relax a little now.
@ThatV12MiataBruh2 жыл бұрын
LS doing good'ol LS things 🔥
@mattfavor29402 жыл бұрын
Yea bro kinda surprised Brent isn’t tuning that thing. But hey bf peeps freak out there’s things us watchers may not know about behind the senes. Brent is a busy guy and can’t be everywhere at once like Santa clause. Haha. I’m sure he’ll get his grubby paws on the rx7 at some point. Glad to see your build comin together Hayden. Can’t wait to see you and Kyle line these monsters up!! Great job bro!!
@drew538322 жыл бұрын
Congrats Hayden! Good work!
@bluebird80042 жыл бұрын
Fairly new to the channel but absolutely love your work. Top notch shit my man. Hope to see you get to 100k real soon. Your work speaks for itself 🤙
@BradLeeJokes2 жыл бұрын
Congrats man! Car looks great.
@thesquirrelchroniclesakare78082 жыл бұрын
That thing is gonna be so much fun to drive. Nice job Hayden
@tjabbie2 жыл бұрын
This is the content I wanna see!! Love it Hayden. Good job!
@codypatrick55592 жыл бұрын
Finally!! This is a badass ride bro. Can’t wait to see it throw down
@Jason-er8mf2 жыл бұрын
Let’s go Hayden killing it bro nearly at a 100k keep up the good work
@cre8tivegarage1572 жыл бұрын
So close to 100k subs , and this is such a beautiful beast
@Todd9362 жыл бұрын
Have been here since… u said u… would do a review… on u r welder for us… but I know u r busy and it shows in u r work anyway so my questions were answered… for me …you do great work …keep it up man
@cmattdabrat2 жыл бұрын
Congrats! That's a healthy number. Can't wait to see what'll do at the track.
@jtyoung7062 жыл бұрын
Nice to see this thing close to having fun again!
@calebc60282 жыл бұрын
After three years I just got my car done too, 12v vr6 jetta with a 62mm, cheers buddy!
@moedigzz2 жыл бұрын
Congrats on making that jam.
@lsit72402 жыл бұрын
Good work homie! Motor to weight ratio definitely recipe for 7s.. 😎👍
@Thewatson772 жыл бұрын
Man she sounds amazing 👌🏼 can’t wait to see you run down the track
@ab_autowerks4922 жыл бұрын
Good to see Carlos. What happened to his awd integra?
@Dubzy902 жыл бұрын
Our iowa boi out there killing it!! Stay classy my friend, Iowa still loves you
@jasonveto23202 жыл бұрын
Keep it up you'll be getting that silver play button for Christmas! Love to see you guys all coming up!
@Scottyschannelmtb2 жыл бұрын
Sick brother keep up the great videos 👊🏻🤘🏻👌🏻❤️🇬🇧
@thebadassbuickfromcamrose85412 жыл бұрын
Way to go man.... it's ripping......
@minibikemadman2 жыл бұрын
Those common 1000hp ls builds. Love the work ya do.
@RaceBrosCarlos2 жыл бұрын
MeDuckulous #1! Let’s get him to 100k subs already!
@durfmann123452 жыл бұрын
Good shit Hayden!
@AjarZzzz2 жыл бұрын
Gotta love them 8 rotor setups. They seem to be going on everything... 😂🤣😂🤣
@marine98792 жыл бұрын
clicked it worked lol car sounds super clean man, looks good great job man!
@hartiaacres2 жыл бұрын
That's a VS 88mm?? Nice job , should run well with the cool weather. Good luck at the track.
@cornfedwrx2 жыл бұрын
Sick 💯🤙
@MonkeyFabGarage2 жыл бұрын
That’s awesome. I know you’re a math nerd so you know how fast that is 👀
@kevinlee46442 жыл бұрын
Lookin good bro, can see it in your face. Kinda surprising with the food you eat though lol!
@19961djs2 жыл бұрын
We need to see this on Brent's Dyno with him on the laptop
@james10739
2 жыл бұрын
That's what I was expecting but I mean it's the same really
@redsballer19042 жыл бұрын
Have you ever done any body fabrication? For example, removing and replacing rusted body parts?
@MonsterCaddy2 жыл бұрын
No mammes bro!! That freakin epic!!!😂😂
@hyper85452 жыл бұрын
Gratz man. I been watching the entire time. Now do some passes =]
@mksaeg2 жыл бұрын
My first video to watch after being up for 17 hours and a 12 hour work day!!!
@natedog81472 жыл бұрын
Interesting video
@owenmunson56982 жыл бұрын
Almost to a 100k subscribers too!!
@lvpheno70252 жыл бұрын
NEVER GOING TO LAST!!!!!!!
@johnnylopez78612 жыл бұрын
It’s not about horse power it’s about how you gonna use it .
@stoker202 жыл бұрын
Uh Oh, Kyle gonna get gapped!! At least to 1000'!!
@kxlucifer
2 жыл бұрын
Dude this thing going wheelie 12 o clock or 1 o clock hard..need laser height sensor
@adamryanclark2 жыл бұрын
Damn my buddy’s car that has a 408ci LS with Cathedral port heads & Holley high ram intake manifold with a Holley 102mm throttle body and Snake Eater Performance 220 injectors also setup was on a air to air intercooler with 1 670cc snow performance methanol nozzle as well car was tuned on E85 but it would only make 816whp with 1 MagnaFuel 750. We ended up having to put another MagnaFuel 750 that was on a Hobbs switch to be able to break the 1000whp mark. And that was with -10AN ptfe feed & -8AN ptfe return line and a Aeromotive X1 series FPR.
@kyleneedham6106
2 жыл бұрын
E85 takes 30% more fuel. So yes you run out of flow faster
@fareed006 Жыл бұрын
hello can i ask what type of material is used for the intake and exhaust pipe ? is it stanlestil 304 ! Thanks
@hoffbald2 жыл бұрын
what is the dyno dude doing?
@jorgesierra47142 жыл бұрын
The "no mames we" killed me heheheheh
@ontariofishing17902 жыл бұрын
yooooo let's goooooo
@uselessoutdoorsman28262 жыл бұрын
Cool 8 rotor with 8 pistons.
@Danger-Dave2 жыл бұрын
Hayden 2 B fair, 991 @ that elevation would be close to 1100 at Florida Man's SL...just need to figure out how to carry some of that Colorado Boost weather air with ya when you race Kyle next time!
@james10739
2 жыл бұрын
He said it is corrected so I think that means that's what it would do at sea level but I don't own a Dyno but I assume that's what they mean by corrected
@peterhoffman50432 жыл бұрын
Damn, I was like #419... Just a touch to soon 😆😆😆
@Gs_up2 жыл бұрын
F*ck yah! Niiicceee! Just what I needed to see after a long day at work! That’s what’s up right there!! 🤘🏻 SoCal909☠️😎
@georgem.61362 жыл бұрын
Dude the car is gonna Fly
@tylerschmitt19212 жыл бұрын
I’m confused is it a stock rotating assembly “short block” or just a stock block
@jonnyxrebel1762 жыл бұрын
What LS are you running??
@GlazzedDonut2 жыл бұрын
Lord lifting
@TunerFreak2 жыл бұрын
niceee
@haroldhoyt34012 жыл бұрын
In here
@bendover-uf9st2 жыл бұрын
💪
@SWTH712 жыл бұрын
Is it a 5.3? I forgot already
@ELLeeOh2 жыл бұрын
👍👍from this guy
@flyingkiwi69592 жыл бұрын
yeeeew thats mean
@dhackens2 жыл бұрын
You don't tune with PFI speed ?
@peppermintnightmare47412 жыл бұрын
Ohhhh haha I get it. 8 Rotor
@Savage6supra2 жыл бұрын
Your magnafuel 750 should do 1200hp fine i had no worries around 1150hp
@Tvic-Turbolyfe2 жыл бұрын
Almost came and watched but got tired lol
@toofatforcombat35622 жыл бұрын
Porque NO PFI? 😢
@subhumann2 жыл бұрын
I've been told that comments help with the KZread algorithm. 😁
@chapulinmarrero43392 жыл бұрын
👌👌👌👌👌
@grownman2022 жыл бұрын
gewd damnnnnn
@tannerharkey
2 жыл бұрын
Stock bottom end with head studs, a cam, and valve springs if I remember correctly
@livinonlimiter2 жыл бұрын
Good fuckin rip my guy!
@terrypickette1182 жыл бұрын
- 👍 👍 🔧 -
@timtaylor61472 жыл бұрын
So back at Bradenton that will dust the Mr.2
@chicagovasko2 жыл бұрын
Carlos paint it same color but put a pinch of black glitter.
@destrukters222 жыл бұрын
Why didn’t you take it to PFI to be dynoed?
@boosted2.4_sky
2 жыл бұрын
Because that's a Mustang Dyno...lol...🤭 Those who know will know.......
@GARAGEIdiotS2 жыл бұрын
What??!!!
@coreyabraham31122 жыл бұрын
Hey Hayden it's Corey down here in Tennessee Tom's buddy you think you might get a chance to knock out that Turbo manifold from my hayabusa over at Brent's house
@mr1shaggy2 жыл бұрын
I think the RX7 vs MR2 is gonna be the MR2
@tcriderph32942 жыл бұрын
Fact.. But that thing is gonna spank the mr2 without doubt.
@vwman2 жыл бұрын
That looks like Brent’s old shop.
@alastairdow-taylor41032 жыл бұрын
Take note people "do it once do it right"
@pgarrett66652 жыл бұрын
😀
@chicagovasko2 жыл бұрын
Freaking car should be called Sars, it's sick.
@dhackens2 жыл бұрын
What the cars weight 2975
@RAWRMotorsports2 жыл бұрын
8 rotor 😆
@Knoss0s2 жыл бұрын
Why didn' t you take it to brent!?
@matsnyder93392 жыл бұрын
Should have went to PFI SPEED FOR THAT 1,000 brother!
@stayathome316
2 жыл бұрын
It's an LS, not honda engine.
@stoker20
2 жыл бұрын
Brent was out of town Bro. Hayden is OG no worries.
@zethloveless7238
2 жыл бұрын
@@stayathome316 Brent tunes ls engines as well for trophy truck team I’m not sure if you know… he’s well versed
Пікірлер: 152
WARNING THIS IS 100% CLICK BAIT BECAUSE IT MADE 991 HP NOT 1000 🤡 For anyone who actually cares. It’s a 5.3 with gen 4 pistons and rods. Summit dual valve springs. LS9 gaskets and China studs. VS racing 88/96.
@chicagovasko
2 жыл бұрын
Smart to keep it simple strong. Should be alot of fun.
@zethloveless7238
2 жыл бұрын
Haha fuck em if they care we love your work Hayden 🤘 been following since the start.
@Slowv8Fiero
2 жыл бұрын
What cam? If you care to share
@newtonfirefly3584
2 жыл бұрын
@Metigulous: Hayden, this build has been and still look pretty good. Sure it has been a process with time. You have many things going personally including doing work for others, which is essential to Your business too. Though the space is limited, perhaps You could say why You chose a single versus twin turbo, and a more conventional waste gate compared with using a electrical controlled one? Why would You use "China studs" ? not better like ARP or such, especially with a LS and 5.3 L ? Am not quite so familiar with all of the terms You wrote about this build. Is the last "VS racing 88/96" referring to the transmission ? You might consider using a hub dyno for refined tuning as many use especially Anderson Dick - Fuel Tech and others. Thus, also there are not issues of tires slipping, and more range of power to work with. in the previous vlog You mentioned about changing the shocks too. Was also thinking why is Hayden not going with some like QA1 or KW ? All The Best and Much Success in Your Quest, Health and Well Being. Sincerely An addition thought, especially for You, Hayden with Your welding expertise and experience. Because my thoughts, imagination, visualization, ideas may be more unusual, non-conventional, innovative too, am thinking, visualizing having any version RX-7 to be modified with and having a mid-engine placement (and many other vehicles which are conducive for such). The balance and weight distribution greatly improves launch, stability, power transfer to the hubs and wheels, handling (for road, track use). Some thoughts to consider, and if You would reply, am interested to know Yours.
@modmatt89coupe
2 жыл бұрын
so how much boost did it take? i am guessing 25 ish?
Followed since the beginning, great to see the progression in not just the car, but the quality of your work. Top class.
@jafferm1938
2 жыл бұрын
Same man! Insane to see how far the car has come. Can’t wait to see it run a killer pass
@anthonygibbo1881
2 жыл бұрын
If anything man it's built nice and he cares about how it looks I mean the fab work is 👌🏾 and it's making good power for what it is who gives a fk wat anyone else think or say nice build hayden and happy holidays man enjoy 👍🏽
This is the right amount of power to run a low 8 in this car. Crank it up!
Hey can’t wait to see the track video? Keep it up Hayden fun to watch this build. Come a long way sense the first engine, the first turbo. Let’s get him to a 100k.
The car is a absolute credit to you, your welds are next level, this is gonna be spicy 🌶 on the track 💪🔥
Sweet almost time to line up with the mr2
Please keep posting, the rx7 hasn't reached its final form💪
If you ever in Okoboji, i need a turbo header for my 22r sand rail lol. Im just putting a v band on the stock manifold for now but ill be waiting for you to start doing Yota log manifolds.
Love to see regular uploads of this car, glad it's back in the spotlight!!
Been following this build since day one. I actually have a 79 myself that I’m building, waiting for my terminator to ship out now. Running a bone stock 5.3 with the stock rear end, can’t wait to get the 8.8 and go for boost. Godspeed on your career!!
Cleanest build ever, can't wait to see this thing make a hit!
I’m just glad your posting more often !! Keep up the awesome work !!! #Progress
Can't wait to see you make runs Hayden, and not get kicked out for no certified cage.
Real happy to see you get the RX chevin goin again. Its a gem, full of great craft. Its gunna be a lot of fun dialing it in and beyond. Congrats mate, you can relax a little now.
LS doing good'ol LS things 🔥
Yea bro kinda surprised Brent isn’t tuning that thing. But hey bf peeps freak out there’s things us watchers may not know about behind the senes. Brent is a busy guy and can’t be everywhere at once like Santa clause. Haha. I’m sure he’ll get his grubby paws on the rx7 at some point. Glad to see your build comin together Hayden. Can’t wait to see you and Kyle line these monsters up!! Great job bro!!
Congrats Hayden! Good work!
Fairly new to the channel but absolutely love your work. Top notch shit my man. Hope to see you get to 100k real soon. Your work speaks for itself 🤙
Congrats man! Car looks great.
That thing is gonna be so much fun to drive. Nice job Hayden
This is the content I wanna see!! Love it Hayden. Good job!
Finally!! This is a badass ride bro. Can’t wait to see it throw down
Let’s go Hayden killing it bro nearly at a 100k keep up the good work
So close to 100k subs , and this is such a beautiful beast
Have been here since… u said u… would do a review… on u r welder for us… but I know u r busy and it shows in u r work anyway so my questions were answered… for me …you do great work …keep it up man
Congrats! That's a healthy number. Can't wait to see what'll do at the track.
Nice to see this thing close to having fun again!
After three years I just got my car done too, 12v vr6 jetta with a 62mm, cheers buddy!
Congrats on making that jam.
Good work homie! Motor to weight ratio definitely recipe for 7s.. 😎👍
Man she sounds amazing 👌🏼 can’t wait to see you run down the track
Good to see Carlos. What happened to his awd integra?
Our iowa boi out there killing it!! Stay classy my friend, Iowa still loves you
Keep it up you'll be getting that silver play button for Christmas! Love to see you guys all coming up!
Sick brother keep up the great videos 👊🏻🤘🏻👌🏻❤️🇬🇧
Way to go man.... it's ripping......
Those common 1000hp ls builds. Love the work ya do.
MeDuckulous #1! Let’s get him to 100k subs already!
Good shit Hayden!
Gotta love them 8 rotor setups. They seem to be going on everything... 😂🤣😂🤣
clicked it worked lol car sounds super clean man, looks good great job man!
That's a VS 88mm?? Nice job , should run well with the cool weather. Good luck at the track.
Sick 💯🤙
That’s awesome. I know you’re a math nerd so you know how fast that is 👀
Lookin good bro, can see it in your face. Kinda surprising with the food you eat though lol!
We need to see this on Brent's Dyno with him on the laptop
@james10739
2 жыл бұрын
That's what I was expecting but I mean it's the same really
Have you ever done any body fabrication? For example, removing and replacing rusted body parts?
No mammes bro!! That freakin epic!!!😂😂
Gratz man. I been watching the entire time. Now do some passes =]
My first video to watch after being up for 17 hours and a 12 hour work day!!!
Interesting video
Almost to a 100k subscribers too!!
NEVER GOING TO LAST!!!!!!!
It’s not about horse power it’s about how you gonna use it .
Uh Oh, Kyle gonna get gapped!! At least to 1000'!!
@kxlucifer
2 жыл бұрын
Dude this thing going wheelie 12 o clock or 1 o clock hard..need laser height sensor
Damn my buddy’s car that has a 408ci LS with Cathedral port heads & Holley high ram intake manifold with a Holley 102mm throttle body and Snake Eater Performance 220 injectors also setup was on a air to air intercooler with 1 670cc snow performance methanol nozzle as well car was tuned on E85 but it would only make 816whp with 1 MagnaFuel 750. We ended up having to put another MagnaFuel 750 that was on a Hobbs switch to be able to break the 1000whp mark. And that was with -10AN ptfe feed & -8AN ptfe return line and a Aeromotive X1 series FPR.
@kyleneedham6106
2 жыл бұрын
E85 takes 30% more fuel. So yes you run out of flow faster
hello can i ask what type of material is used for the intake and exhaust pipe ? is it stanlestil 304 ! Thanks
what is the dyno dude doing?
The "no mames we" killed me heheheheh
yooooo let's goooooo
Cool 8 rotor with 8 pistons.
Hayden 2 B fair, 991 @ that elevation would be close to 1100 at Florida Man's SL...just need to figure out how to carry some of that Colorado Boost weather air with ya when you race Kyle next time!
@james10739
2 жыл бұрын
He said it is corrected so I think that means that's what it would do at sea level but I don't own a Dyno but I assume that's what they mean by corrected
Damn, I was like #419... Just a touch to soon 😆😆😆
F*ck yah! Niiicceee! Just what I needed to see after a long day at work! That’s what’s up right there!! 🤘🏻 SoCal909☠️😎
Dude the car is gonna Fly
I’m confused is it a stock rotating assembly “short block” or just a stock block
What LS are you running??
Lord lifting
niceee
In here
💪
Is it a 5.3? I forgot already
👍👍from this guy
yeeeew thats mean
You don't tune with PFI speed ?
Ohhhh haha I get it. 8 Rotor
Your magnafuel 750 should do 1200hp fine i had no worries around 1150hp
Almost came and watched but got tired lol
Porque NO PFI? 😢
I've been told that comments help with the KZread algorithm. 😁
👌👌👌👌👌
gewd damnnnnn
@tannerharkey
2 жыл бұрын
Stock bottom end with head studs, a cam, and valve springs if I remember correctly
Good fuckin rip my guy!
- 👍 👍 🔧 -
So back at Bradenton that will dust the Mr.2
Carlos paint it same color but put a pinch of black glitter.
Why didn’t you take it to PFI to be dynoed?
@boosted2.4_sky
2 жыл бұрын
Because that's a Mustang Dyno...lol...🤭 Those who know will know.......
What??!!!
Hey Hayden it's Corey down here in Tennessee Tom's buddy you think you might get a chance to knock out that Turbo manifold from my hayabusa over at Brent's house
I think the RX7 vs MR2 is gonna be the MR2
Fact.. But that thing is gonna spank the mr2 without doubt.
That looks like Brent’s old shop.
Take note people "do it once do it right"
😀
Freaking car should be called Sars, it's sick.
What the cars weight 2975
8 rotor 😆
Why didn' t you take it to brent!?
Should have went to PFI SPEED FOR THAT 1,000 brother!
@stayathome316
2 жыл бұрын
It's an LS, not honda engine.
@stoker20
2 жыл бұрын
Brent was out of town Bro. Hayden is OG no worries.
@zethloveless7238
2 жыл бұрын
@@stayathome316 Brent tunes ls engines as well for trophy truck team I’m not sure if you know… he’s well versed
Whoo hoo first to watch and great job kid