Dang girl looking good. Liking these frequent uploads

@imalec

2 жыл бұрын

“Frequent”

@okobojian1860

2 жыл бұрын

😂

@jamiestrong7993

2 жыл бұрын

Consistent. One every 3 months 🤣🤣🤣

@Metigulous

2 жыл бұрын

Very consistent at not uploading 🤷🏼‍♂️🤣

@jamiestrong7993

2 жыл бұрын

You’d kill KZread if ya had 50 grand to play with and no customers

Can’t wait to see it do some backflips 🥰

@Metigulous

2 жыл бұрын

😅

@justaguynamedmax8207

2 жыл бұрын

Nah, he's too cautious to allow that 🤣 but that's not a bad thing

I started watching your channel years ago. Back then you where putting out more content. I am happy to see you finally have some time for your projects. I understand how life tends to get in the way of our hobbies. Lol!! Time is always in demand and short on supply. So we must manage our time as best we can. But remember that all work and no play makes for boring dull life's.

Been waiting a while too see the cruise! You're Out here killing it man!

Yeah the old clearance bubble... I had a Triumph TR4 and those hoods had the clearance bubble offset to the passengers side to clear the twin Stromberg carbs sticking up. She's looking good man!

That turbo placement looks like it might need a hole for some air. Very tight fitment under the hood. So sweet.

The bubble you're talking about, if I'm not mistaken, is a ford Fairlane thunderbolt.

@Timberwolf69

2 жыл бұрын

There have been many cars spoting such a bubble on their hood. Most of the time to make room for the heads.

Wow, the picture in the outro showing the old turbo setup really shows how much more compact the new setup is

@justaguynamedmax8207

2 жыл бұрын

The new setup is beautiful

Can’t wait for the race with Kyle when you guys get the cars dialed

Looking really good. Can't wait to see the dyno session

Make an aluminum plate super tight to the parts that stick out and rivet it on the hood, kind of what you do for fender/bumper exit exhausts 🤘🏻🤘🏻

I think the color looks great just needs a monster detail

Hell yeah bro I was watching the KSR vid and got notification you dropped your vid sorry Kevin but my day 1 dropped gotta share the love

You or Derick put the tuneup on live. I can’t drive there and I’m old and can’t wait for your upload. 😎

Keep kicking ass! Thanks for sharing!

You're channel > other boostedboiz channels Keep it up! The Rx7 is looking sick

Your rx7 is si sick ... Been loving the videos

I am happy now that shit is out your fuel filter 😅The whole way through I was thinking 🙏please check your fuel filter before the dyno were she's been sitting alittle while, can't wait to see this thing launch hard, keep killing it bro👍

Glad you’re posting more

Im so happy for you man ✌🏻✌🏻👍🏻 love your work 👌🏻

not sure exactly how big that opening is but you should graft a hood bubble from an Eagle Talon to cover up the intake

@justaguynamedmax8207

2 жыл бұрын

That would look sick

Thanks for the video. I watch them all

sleeper look if it wasn't for your rear wheels. Looks good can't wait to see it dialed in... Keep up the great work/ fab work

IT LOOKS SO GOOD ! Like you mentioned just add a little beauty ring/plate thingy and you'll be good to go 🤙

Keep at it bro! Your doing great!

Haydon cheesin' on the way to lunch was funny.

She is looking good. A shaker style hood would be cool and different. Love to see the car back moving. Finish that cage up so you stay safe bud.

Nice, for the size of the cut you could even put a 'low-pro' back scoop to blend it in +aero!

Can’t wait to see her at the track! 🔥🔥🔥

Haydon you rock! Love the channel and content! I'm here for the algorithm! Peace

Great content Hayden!!!

Loving the content!

Keep the uploads coming from the UK 🇬🇧 🤘🤘

GET THIS MAN TO 100k!!!!!!

Thank God. The no hood thing is so dumb. Nice work

Cant wait for some consistency with your car and uploads bro!

Cool looking RX 7 LS ... I got 1991 RX 7 covertable that is stock with the 13 B

Car looking amazing… wish I was closer to have you do the turbo kit on my Lexus gs300 LS swapped

So sick bro 😎

That looks really good I wouldn't worry about that little extra cut around put your nice trim piece around that it'll look good

Great work, more uploads. 👍

Welcome home brother.

A small hood scoop will be nice to cover the hole!!🔥🔥

Good job cutting the hood ,looking great

Yes the eclipse 95-99 hood has the perfect hump to cover it....but man it looks cool like that too....🙂🤙🙏

Use the hood bump from an eclipse to go over top of it. Nothing huge but still noticeable and sleek

hey ya bro keep it coming dont slow down the drive and content you got alot of supporters !!!!!1 wish you where closer id have you do the cage and work on my 75 monza.

Man that roll cage you made for Jamie was top knotch.

Good stuff, Bro! #Metigulous

Almost 100k subs so cool.

Pretty sweet how little chopping you had to do on the hood 👍🏼👍🏼

You done a amazing job with the 8 Rotor your fab work is as professional as it comes or better I really am waiting to see it at the track and I know it going to run the times you want it to run I got to give you a big tums UP for building a amazing 8 Rotor your one he'll of a Fabricator.

E-types also have a nice bubble, I think for one of the overhead cams.

What I do to cut hood is I take cardboard and the size of hood and use that to lay as if it was the hood and press down on that so i get my perfect cut line. Amd for your headlights cut the factory cover and push them in like a inward vemt amd mount 2 small 2x2 led lights so you have high and low beams and just use a cheep yellow led for turn signal so you can have a tru street car

I've been told that comments help with the KZread algorithm. 😁

Old trick is using some firm plasticine or similar on the underside of the hood, then when you lower it down anything touching will depress into it.

Here you on the cost. Keep posting though even if it’s something small. You’re videos are well made.

The bubble you refer to is the buick speed bulge.

Next time you need to cut a hood u need to make a cardboard template with two sided tape on it and set it on top of the part u need to cut around. Then close the hood. Boom. Perfect mark.

that looks awesome. throw an autozone hood scoop on there and call it a day. lol

we are waiting

I would make a cowl induction hood scoop for it so that it will suck hot air out from under the hood and help keep the motor cool so you can take it on drag week and other events that have long street runs between tracks.

Shaker on the molars for the hood or a 78 79 and other Pontiac Trans am

👍

gangsta

Expose that Intercooler! 🥴and velocity stack that turbo inlet 😎😈

Laser on tripod works good

The bulge from a eagle talon would probably cover it.

👌👌

Where’s my dawg at

@SirVic42

2 жыл бұрын

There has been a serious lack of Jupiter content on this channel lately. Everyone loves Lucy, of course, but we need some Jupe!

Rectangular bump matching the shape of the front of the car . Just a thought.

Shape the bottom of the hood pin latch to fit hood or make a small spacers fit the shape.

those chevy 2 bolt header gaskets always leak. high temp rtv is friend

dr tunemall should have tuned this while down in florida !!!

11:37...damn that hair wtf lol lookin clean

It's looking great man just please finish the cage

HEY HEY BLONDIE WE HERE BLESINGS FROM HOUSTON TX

Have a look for a XR8 FORD FALCON bonnet boldge we have them in New Zealanders and Australia

The hole in the hood is shaped like a skull. A trim plate shaped like the punisher logo could work.

I think with some massaging on that 90 degree elbow you might be able to fit everything under a hood, whats to come? Moving to FL too? LOL

Motorcycles allowed at the pueblo race?

Come back to Fla man.

Should make the hood open the other way and attach the head light covers to the hood

What’s funny to me is that out of off the Colorado dudes Kyle’s is the most successful and most hacky

Kinda confused on why the hood pins are at the bottom of the hood, when the hood opens from the window side . 🤔

Put a hornet scoop on it, my dad had a chopped down and moulded in hornet scoop on his and it looked sick.

Are you gonna put a wheelie bar eventually? I see most guys learn to launch better with the wheelie or just fuck with launch control.

shaker hood thats that bubble on hood

Shaker hood n intake, u see the engine shaking

Don't use those quick latches for holding your hood closed iv seen multiple cars have their hoods fly up or off during racing don't want to see that happen to you buddy

Get a spal fan bro they work the best

The turbo will probabaly burn the paint.

love the hood but it's a damn shame to hide that Ti pipe...some sort of plexi window would be sweet

I already mentioned it to you before, go get a friggin eclipse hood and cut the bubble out, weld the eclipse bubble on your hood. No more hole, no ugly cowl hood, and looks way better than a hole in your hood or cowl...... Problem solved!

I bet Carlos got a hookup for a detail and ceramic polish. Car would gleam fresh.

@okobojian1860

2 жыл бұрын

I think Carlos needs to paint it.

@chicagovasko

2 жыл бұрын

@@okobojian1860 yeah but same color. That color is fantastic.

Is that a VW in the background?

It’s called a Shaker Intake.

When is the funny car halo going back in?

👍🏽👍🏽🇺🇸

Someone makes a replica gn/gnx bump