The internet experts have arrived 🤣 Yes I had it floored the whole time No it’s not a 4 port problem Yes i will fix it, I just ran out of time here The motor is still in one piece, there’s no sense in trying to blow it up unsorted the first time out with it. Especially because it doesn’t have a catch pan. Have nothing to prove, just trying to have fun I appreciate everyone for the love and I will continue making videos whenever I work on the car!

@4familyman

2 жыл бұрын

4 port is still a PITA. 🤷🏼‍♂️ Tuning by tenths of a % of duty sucks. Lol Car is looking good otherwise. Keep grindin

@jasonaldenhaley1

2 жыл бұрын

....meanwhile there's 19.857 miles of manifolds, cages, and intake piping back in reality to do. Self employment: thankless since '0000

@TopGoose-bf1mx

2 жыл бұрын

A lot of people in the comments here watch too much TV. Acting like cars are perfect straight off the bat for some people. Everyone has hours of test and tune, dial in, even breakage, to get their cars where they need to be. In reality, when someone actually documents the trial and error, it’s shocking to see the inside of perfecting a car.

@ricksworld2707

2 жыл бұрын

Love the content keep it coming yal

@nsboost

2 жыл бұрын

4 ports ain’t worth the trouble. You can get similar results using a 3 port plumbed a certain way… it it will be a lot less sensitive than the 4 port. I Had a 8 psi spring in mine and had great success ramping to 30psi. I did do about 10 pulls on the street using open loop control with it set at different duty cycles so I could properly map out the map based control. Weather would affect it but it was within a couple psi. I’m up in Wyoming. My 3500lbs car runs 5.8s with a stock 5.3 and a FI 85mm. Haven’t really turned it up at the track yet but I think I got 5.5s in the bag here in the rockys.

Please for the love of god, stay active this time bro. Your content is top notch. And the fact that you learn it all yourself I like it

@mortenhansen7908

2 жыл бұрын

Your soo right 💯🤟🏻

@ripnliptightlines5092

2 жыл бұрын

Agreed.

@devin4109

2 жыл бұрын

Totally agree 💯

@Manniejr310

2 жыл бұрын

Yep

@nathanhahn5748

2 жыл бұрын

He’s got a lot of pressure though but yeah this is good content and will only benefit him more

Cooper and Wyatt immediately chirping Hayden after that 1.38 60’😂 “I could cartwheel off the line quicker”💀

@d.w.5551

2 жыл бұрын

Quickest way to loose followers...have @ Cooper Bogetti in a video.

@haydenroyer

2 жыл бұрын

@@d.w.5551 Why you say that? Not defending him

@okobojian1860

2 жыл бұрын

Ya I think Cooper helping Garrett get to 1 million really hurt. 🤣

@DomGaccioli

2 жыл бұрын

@@d.w.5551 I’m sorry you feel that way. From what I’ve seen and heard, Cooper has always been a good guy.

@johnappleseed936

2 жыл бұрын

@@DomGaccioli cooper is a sellout

This was worth the 2 year wait!

Hell Yeah ! Hayden please get on the grind and make more videos ! Let this little series be the catalyst for the next chapter.

Don't go over 39.6psi the rods bend at 39.7psi 😂

@lancemiller9866

2 жыл бұрын

Can't wait to see Virgina fox at the track

@wolfparty4234

2 жыл бұрын

Ask him how he knows!!🤣🤣🤣🤦🏻‍♂️

@davescranes

2 жыл бұрын

Your the king of pushing stock blocks to the limits brother! love your content! peace easy get that V.

@Metigulous

2 жыл бұрын

🤣

@4familyman

2 жыл бұрын

@@Metigulous stock bottom end can take a lot more than your boost cut. Turn that shit up. Having it set too tight doesn’t let you even figure out your boost control. And put on a 3 port.

Mad fabrication skills car looks awesome, time to enjoy all that work finally congratulations on getting it A to B

I’m not lying when I say this, when I watch your videos I fall into a state of euphoria… deadass your videos give me the same enjoyment from the old boostedboiz days

@skinnystr8nasty

2 жыл бұрын

I miss the old boostedboiz content

@user-kr2nv3jx5e

2 жыл бұрын

FACTS!!

@seanharrison6162

2 жыл бұрын

Less relateble now but it's understandable you have to keep upgrading and improving not only for yourself but also no one wants to watch the same 3 cars do the same exact times over and over

@imdabeast100

2 жыл бұрын

@@seanharrison6162 yep exactly. I still like their content but it doesn’t feel like goofy teenagers anymore and I guess for a good reason cause they are growing up. But that’s why I like hayden and Pfi’s videos, they still feel the same

I heard the scooter comment anyone else? Still hell of a ride to be proud of man.

Wyatt looking like Vince from the fast and furious. Lol

Awesome, car looks so dialed. Let Brent or Dr. Tune Em All have at it. You gotta make a full pass hit to see what she does before going home. Dont leave until you hit that 8 or 7! Great job

@Nebbia_affaraccimiei

2 жыл бұрын

it's not like old cleeter has a dyno always available..

@jamesmcivor340

2 жыл бұрын

Has to be Brent

Officially joined the wheelie crew let's go 💯💯💯

Congrats on getting that sic looking ride to the track.

Congrsts Hayden! Been waiting for this video for a while now💪🏻

Super happy for you. That thing is going to be a beast once you figure everything out. Must feel awesome to get results after all that work. A little more fine tuning and it will be a certified ripper.

Your friends bustin' your chops just want to see this thing roll out! It's ok that it is offseason so go get it figured out and bring it back for the next season! Excited to see what this can do!

Damn was just at the track last night, came from oregon wish i got to see you guys in person

I love how you build a car by yourself and go on the track fisrt time no issues

That thing looked amazing on that second hit! Congrats on getting it making passes down the track.

Where's my dawg at!?! Oh doing wheelies and racecar stuff😎

Wyatt just old school heckling you man! Priceless!! U need to let him loose and put those videos on Patreon!

@lpe655

2 жыл бұрын

No we heard him. The electric scooters leave harder than Hayden does. LMAO.

Damn.... 2 videos in a month. I feel spoiled

@travisreising3972

2 жыл бұрын

😂😂😂 I know right

@victorcruz4249

2 жыл бұрын

🤣🤣

Idk if you respond to me but man from start to finish this cad has been worth watching an now to u making passes congrats 👌👍

Glad 2 see u putting out regular content, bro!

This is a bad ass car!!!! Don't give up man!!!!! You got what it takes to make something great out of the KZread world!!!!

Like everyone else say stay on it, this is all Hayden built and it will run, just don’t get frustrated and take your time it has been almost two years when I seen you break it all the way down. You are there now it’s just tuning time, you are one of the best fabricators I have ever seen. Maybe let a only tuner give a hand because the 8 rotor is gonna fly

Yea ..if you can... absolutely keep it goin bro....you're legit and just gonna get better...

Sweet man! Glad she's back out rippin'!

Been waiting to see the RX7 on the track great build

Good Arb and figure that boost out.. that thang gone fly

That first pass was so worth all the wait

You deserve this !!

Been following this for years. Glad you finally got it to the track.

You can hear the excitement in Hayden’s voice at the beginning of the video. Got me pumped up honestly.

The car looks absolutely stunning going down the track. Glad you didn't give up during all the trials and tribulations of this build. Hope you get it dialed the way you want it when it's home, thank you for sharing. 👍🏽

Nice to see this beast out again 👍

Great job sticking with it!! Definitely worth the wait

That is one AWESOME RX7/8!!! Came out ridiculous!!! Love it!! Just go and get it tuned, and enjoy the heck out of it!!!

OG fan here. I'm proud of you bro!

Congrats on finally getting the car on the track. Now it time to set some milestones to get the car much better and getting it consistent. Can’t wait to see it getting faster!

so cool to see Cooper helping him film. o most to 100k!!!!

Good work man!! Everybody starts with the car somewhere.

So happy to see you out there and having fun

Oh heck ya that was worth the wait, happy to see this thing going again!

So glad your back man!! Sure missed seeing this beauty bro!👌🏽👌🏽

Keep up the hard work bud!!! So excited for you and this build

Hell yeah brother💪

Lol dude I can see you was feeling the pressure, had to put your foot down “ am not turning the boost cut up” lol 😂 😂😂😂 awesome job tho

Hell yeah. Finally got to run her down the track. Can't wait to see this car dailed in.!

Congratulations on completing the build man, so sick

The rx7 is everything and moor I hope to see in person someday

That 2nd hit it looked like is was about to make a fast pass congrats on getting it out there rippin

Maaaaan those shakes though! (can't blame you lol) I'm obsessed with this car and your attention to detail bro! Excited to eventually see you run it out the back! Seems like you're so close! Keep up the solid work. Good job dude!

@parl9731

2 жыл бұрын

Just the fact that it went perfectly straight after all of the major suspension work that you did alone is a testament to how talented you area and how good your workmanship is. Top notch man, seriously.

It's great to see the RX finally boogying on the track. Awesome work, man. Awesome.

Dude your content is sick keep it rolling!

Heck yeah! Love seeing this in action. Also love seeing you with some help behind the camera. The back and forth conversation as well as the different perspective feels good! 👍👍

Right on brother, I was waiting for this. You'll get it figured out. Getting your project finished was half the battle.

Love seeing SketchyVert on the scene!

So awesome man! So glad to see this thing out making some hits!

Damn man I’m so happy for you keep it up and keep up with the content brotha congrats!

Yes man so happy for you, peace from Australia 🤙

Good for you buddy!! So glad to see you getting your car on the track. Long time coming!! Im so happy for you!!

SICK!!! Keep the content coming!!

Love the car !!! you do premo work !!! this thing looks so mean great work and worth the wait man!!!

Awesome seeing you make hits in the rx7! Keep up the awesome work man and never give up.

I've been waiting since the beginning to see the rx-7 turn into a race car. So glad to see it at the track, You should feel super proud of all you're hard work and dedication!

Hell yeah dood been waiting for this vid for years lmao since your last twin turbo setup lol

good job man! been waiting for this!

This is awesome. All the hard work was worth it. Loved the lads egging you on to stick more boost into it 😅

I’m impressed! Great job buddy. Get a height sensor and traction control set up. She gonna go to the moon.

Glad that thing is running bro! Cant wait to see it at bandimere next year! That thing is going to fly once its all sorted.

Good to see ya back bro !!!!

Nice to see ya finally making passes my dude👏👍

Love the videos at the track where everyone is putting their heads together to figure stuff out.

Sweeeeet glad to see you at the track testing long time coming

Congrats on getting the car back out having fun!

Been waiting on this video for a long time. 👏

Nobody get gets Hayden more pumped than Wyatt. 😆 Everybody should have a best friend like Wyatt.

So good to see it up n running keep up the content

great vid and good job on the MR2 cage looks great!

Finally get to see the RX7 make some hits, congrats on getting it going man. Keep the videos rollin, we want to see more lol

Fellow Iowan, love seeing you do good!!! Keep up the great work.

Let’s goooooo !!!! Finally man. Keep these videos up brotha !!!

Man im so excited for you ✌🏻

I’ve been following since the suicide crx days and I’m proud of the progression from the days of stock ls1 with hockey puck motor mounts to what you have now keep on killing it bro

Great seeing the car back out 🔥

Dude Ive been watching this build since you first bought the car, its so cool to see it ripping finally. This thing has a ton of potential.

man i havent seen you in a while! good to see you again man! your welding skills are INSANE.

Looks great man, cars making straight passes and seems like the chassis is good to go! You'll get the tune straightened out and have that thing flying!

A successful Florida visit. 😎congrats on sticking with the plan.

Hayden I love the video and it’s so awesome to see the car make passes! But please patch those fire wall holes. It’s amazing how fast when stuff goes wrong how fire can make its way through the smallest holes. Just wanna see you stay safe is all. Love the content keep it up!!!

good job man nice to see on track

absolutely love this one. the car is ganna be a beast. congrats. the hard to get victories are worth so much more.

Been waiting, well done$!

Car looks great bro you did it right. Took the time and made it happen 🤙

Looks like it launches well, should haul when the boost settings are sorted!

REALLY good. Massive potential right there considering how well it was going on this first test!

Nice to see you again! I think you could really take off with this, im sure life gets difficult but stay active keep posting !

Love the content man, you need to hang with the boiz more often! Miss this collab

Get It!!! Love the car and can't wait to see what happens.