For the A/C You have to add a drain for the condensation on the portion that would normally be outside the house....

@kablink0

16 күн бұрын

I don't think you're supposed to shake compressors like this either (like when moving to a new house or when buying from a store, you have to let it sit before turning on).

@ThiccAssRaccoon

16 күн бұрын

​@@kablink0it should be fine. The reason why you let it sit after the store is for getting the oil to travel back to the compressor. While being in the store you don't know if it was stored upside down or on its side

@richardomontobahn4327

16 күн бұрын

I was going to ask the same question. Where’s that water going to go?

@leonardmort3216

16 күн бұрын

i was going to comment the same thing. one of the ones i have is constantly dripping outside the other one not so much. have seen some of them with a plastic elbow fitting to attach a hose to.

@TylerDurden-pk5km

16 күн бұрын

Usually the compact units simply splash the water on the hot side of the heat exchangen, then exhaust it with the hot air. Also improves efficiency. Getting rid of the condensation is only an issue for split systems.

5 ton!! And she's still a shell. Oh boy.

Fist test drive?

@Dexterzlabs

16 күн бұрын

Literally gotta wait till the end of the video then all he does is take it outside

@micvox6805

16 күн бұрын

He fistin' to dwive that der high pwerfourmance vehicular dwevice

@imSchwaggy

16 күн бұрын

Ayeee yoooo

@_TheProfessor

16 күн бұрын

This channel has taken a dramatic turn

@Powersproductions130

16 күн бұрын

I guess that just means he’s gonna punch it.

Chris if possible. Consider installing a reverse camera to help with parking a little.

At least you don’t hide anything from your videos love that honesty and transparency and you’re not afraid to admit when you’re wrong Keep the build coming

@jaysunkreuze1466

16 күн бұрын

Not true. He's been warned about his solar system mistakes and refuses to fix the solar panel mounting. This is a huge waste of 💰💰💰💰

ac units are usually on the roof because cool air falls.

@Azimuth0001

16 күн бұрын

If they put a retractable vent on the roof they will be fine.

Since your truck is a quad cab and being 4wd it has a GVWR of 12,200 pounds. Before you did anything to the truck it weighed around 7,600 pounds, you have added 3,300 or so pounds and aren't close to being finished. You have 1,200 pounds left to finish the build and zero towing at this point. Tongue weight counts as payload, which still has to fall at or under the GVWR of the truck.

@ZackNakazora1

16 күн бұрын

I think he can outfit it with with the rest but he won't be able to store water.. And that weight is with unknown fuel.... Water and fuel are very heavvvyy

@meadowsm100

16 күн бұрын

This thing has been a disaster from the jump. Stupid idea and poor execution.

@kennykennedy6298

16 күн бұрын

Wild to think 17k is the gvwr of that truck. You would need something closer to a F550 for that weight. It'll definitely be overloaded by the end of it. I'm here for it though 😂

@Goose-it

16 күн бұрын

He's not using it commercially so gvwr isn't really ever going to effect him, not like he has to stop at weight stations or anything

@mikeytentoes3744

16 күн бұрын

I was wondering this since the start. Steel is way too heavy. Should have done this out of aluminum. You’re out of weight and have a lot more weight to go. Don’t forget additional passengers and luggage, food, water, fuel, spare tire.

I'd advice a color change, otherwise with hot days, it could become a mobile sauna. As retractable windows, which would work as safety exits.

@delco999

16 күн бұрын

As they live in a kinda cold region, they should be fine as far as don't take that shit down south

@TriHard612

16 күн бұрын

I was just about to say that. Thats how you get hot water, a black container on top of your vehicle...

@skaughtmc6591

16 күн бұрын

He mentioned a couple episodes ago that they’ll probably paint the roof white.

@lillexus5589

16 күн бұрын

Or maybe some sort of wrap or foil to deflect the UV rays

@mertonallowicious

16 күн бұрын

@@lillexus5589wrapping bed liner 🤣

Put some fine metalic mesh below the louvers. Bugs love hot air.

You need rear helper airbags on the axle and reinforce the frame before bends

@Level_Up_Nation

16 күн бұрын

Yeah, was wondering about how that frame was doing now 😅 those trucks are not known for their strong frames.

@Gizmetti

15 күн бұрын

It's rated for 17,000 so thats not neccesary. However.. once it's all said and done, helper bags would help from the camper interior from being thrown around over rough roads or speed bumps.

@todontblink

15 күн бұрын

@@Gizmettithis truck isn't rated for 17k gvrw it is 12,200 at best

@Gizmetti

15 күн бұрын

@@todontblink wrong. It’s almost like you didn’t watch the video. They said it themselves was.

@todontblink

15 күн бұрын

@@GizmettiI know what he said and he is wrong. that truck might be rated to tow around 17k lbs but it's gvrw is only around 12,200lbs at most. most company's that build similar vehicles to this make them based off chassis cabs in the f550 or ram 5500 size range for the much higher gvrw. One example you might see on a daily basis is an ambulance.

Hats off on the out-of-the-box thinking, but I'm afraid that (even if it doesn't overheat) the A/C unit is going to short-cycle - meaning that it's going to pull the cold air back through the thermostat too quickly and fool it into thinking the space is cool enough. It's mounted too low, and cold air sinks. There's a reason RV air conditioning units are roof-mount. Love the channel, love the builds!

@eslai

16 күн бұрын

Yeah it should never have been placed that low, plus if it's running, no one's going to want to sit right there on that bench with their legs blocking it.

@dalton8813

16 күн бұрын

It’ll run non stop anyway let’s be real here

@Irontrucker

16 күн бұрын

You're right the ac is mounted way too low .

@jerrellrice3413

16 күн бұрын

That's what I was thinking. Cold air falls, so it seems to me the cold air falling from a higher point would fill the cabin better and more efficiently than cold air mounted low and staying low. In a perfect world, I always figured you'd want separate systems. Hot air mounted lower and cold air mounted higher.

@stazang

15 күн бұрын

But these home units are usually mounted low

The aircon drain is going to be very important, put it in now and save yourself hugh issues down the track.

Excellent build! The maximum load bearing Gross Vehicular Weight of a 2008 Dodge Ram 3500 with dual rear wheel is 11,000 lb for the 4x4 and 11,500 for the 4x2. You're possibly confusing trailable weight with max payload weight - two different things. Exceeding structural limits on axles, tyres would be an interesting liability situation.

@trucktruckgo3787

12 күн бұрын

Exactly. The brand new trucks are only 14,000. So this one is much less. I knew from the beginning all that steel was going to put it way over.

Ac condensate line? Dont want that water just sitting

@xendralxenthraldious7918

16 күн бұрын

I was wondering what their plan was for all the moisture that's going to drip out of the rear side of the AC unit..

@ConstitutionalFreedomFighter

16 күн бұрын

Just needs a drain hole out the bottom.

@curtisjmurphy

16 күн бұрын

On hot humid nights in the summer my window AC unit just pours water out the back onto my porch roof. They need a drain for sure. I'm also a little concerned about the angle of the unit and the duct tape they installed on the inside of the unit. I believe they are supposed to be angled slightly toward the back of the unit so condensation runs outside, i worry its perfectly level and the tape may be blocking some drainage holes.

@ConstitutionalFreedomFighter

16 күн бұрын

@@curtisjmurphy Dont worry about it, just another opportunity for them to learn some more LOL

@TylerDurden-pk5km

16 күн бұрын

Condensate is only a problem for split units - compact units splash the condensate on the hot side of the heat exchanger, evaporating it - and then exhausting it with the hot air. This also improves efficiency.

IMO - bite the bullet now and replace all those steel exterior panels with aluminum panels & rivet them on to the existing skeletal structure (you could probably even make templates from the pieces you cut off). It'll pay dividends in the future and you'll be thankful you did. weight, rust, thermal properties, etc. It'll only get harder from here to do.

You can have a bench and a desk. You need to look into Tiny House building. Things need to do double and triple duty in a small space.

@SyracuseBrad

16 күн бұрын

Yeah put a desktop on a swing arm

@danielcrane1682

15 күн бұрын

Knowing how Chris runs his channel, he will probably look to these comments for direction on the build. Crowdsourcing in an area where you have little experience is the smart move anyway

On the venting that exits for ac . If u didn't already put a screen behind the vents . So bugs and other things don't get inside ur unit

@SyracuseBrad

16 күн бұрын

“Bees! …Your forearms are useless against them!”

Love a good fist drive! 👊🏼

@figmo7494

16 күн бұрын

That’s what she said! 😅

@myopinion69420

16 күн бұрын

that's odd, I find them a pain in the ass....

@jeremyb4493

13 күн бұрын

​@@myopinion69420😵

heat rises and cold falls. this is why you find furnace vents in the floor and ac vents in the celing.. your going to have a nice cold floor. but everything above waist height will be sweatting... have fun.

Just to let you guys know on the AC unit on the bottom will be a hole or two of them that's for condensation? You may want to pipe it for the condensation😊

Thanks to you for being so honest with how your wiring was and the fix for it!! Also, Oscar explaining the wiring and how it can "shock. you" was HILARIOUS!! My wife and I were laughing so much!! We really do appreciate all the extra work you do to.take us along on your journey!!! We KNOW it takes at least twice as long (probably even more) to do a project when you have to capture it all via camera. Take care and may God overwhelm you with blessings!!!

So, maybe I'm missing something. But doesn't the backside of the AC unit typically on the outside to discharge water? I think it brings in the air, cools it, dehumidifies it, and sends it out. I think that humidity needs to go somewhere.

@TylerDurden-pk5km

16 күн бұрын

On the hot side of the heat exchanger, evaporating it - then out with the hot exhaust air.

I gotta say i admire ya'll resolve. Note, drain for AC. It won't be efficient being on the ground (cold air falls. Hence why AC vents are in roof. Allows the cold air to fall on u in a matter of speaking). Hopefully it is sized to cool the space. Nice truck

Only halfway through the episode so not sure if you do it, but 100% run electric to where a roof mount ac unit would go, cap it off on both ends. This way if something goes wrong with the home made one you don't need to fish wire or remove panels to get a wire in there.

The ac unit will be struggling. That intake duct is only capable of 100cfm and the back side of that ac unit uses almost 300 or so CFM. Those chrome vents are more meant for passive to minimal cooling of a small heat load, the style of vent and size of louvres cause a very large air restriction. It’s too low, your feet are gonna be cold and it will struggle to cool the standing / sleeping area. cool air falls and hot air rises. Finally, there’s no way for condensation to be expelled without collecting and causing mold. If you keep it how it is, it will just be a frustration and waste of energy to use. Google is your best friend in cases where you don’t know what you’re doing, I find it best too take a min, purposefully ask it questions related to the topic at hand, in the most obscure way possible (a way you wouldn’t normally ask a question) and you will find almost all the answers your looking for.

Going to be a completely different story driving in the rain at 65 mph, that water is going to force its way into any and all voids in your "waterproofing". Hope you test that before you call it "done"

Roof top AC is the way to go. I have a van conversion and space is always a problem. In my opinion there’s a lot of space lost by this setup. I like all the thought that went into it. I learned while building my van, there is just some things you just have to buy. I love watching the build

Hopefully the condemnation (condensation) from the A/C will drain out of the truck and not fill the back camper with water. *Edited but too funny to remove error*

@1ronco

16 күн бұрын

Condemnation????😂😂😂😂😂

@Sammyadams432

16 күн бұрын

@@1ronco really sucks to not proofread before hitting send. 🤣

@eslai

16 күн бұрын

@@Sammyadams432 That's the B is for Build way though eh? :D

@tatankawhiteplume6038

16 күн бұрын

C is for Condemnation 😅😅😅

@Sammyadams432

16 күн бұрын

@@tatankawhiteplume6038 ❤️ 😆

Not sure if you have looked into it or not, but I'd strongly recommend installing an exhaust brake. It will help lessen the strain on your brakes with all that weight, and at least for me, it would be some peace of mind that it would be safer. It definitely helps with mountain driving/towing, too! The newer cummins trucks (any 6.7, so 2007.5 and newer) have a built-in exhaust brake with the vgt turbo they have equipped. I liked it so much on my 2017 cummins that i had to have one when I bought my 2006. I'll reach out to you with some more info that you can check out if interested.

Nothing beats getting that fist ride!

For the AC. The “outside” air should actually come from inside the cabin. So you aren’t trying to cool outside air constantly. You will cool off the air you already conditioned. That’s how it works in your window at home.

Love seeing the progress! Don't forget exterior scene lights

You need a catch tray and drain for that AC. Typically that would be hanging out a home window and free to just drip from the entire bottom. Also the vent is going to be covered in condensation so the tray needs to catch all that too. A roof rv Ac just seems like a much safer cleaner option.

For the ac, i would consider a puller fan. I work in the av world and use acinifinty for attic venting just a ln idea but awsome build!!!!

Remember to have to extra vents (now that you're making it air tight), if the cabin is in positive pressure, you wont get any of that cold air from the AC unit in there, it will just throw it out again. Quote of the day: 'Don't break your breaker with a wrong breaker' By B is for Build

FYI. The framing in a top mount unit is 15”x15” most of you max air fans are the same size. I would recommend you install a max air unit. It will help suck out all the hot air. And if you want to put in a top air unit. The framing is already there. Hope this helps. The camper tuck looks amazing

Don’t forget an AC Drain. Also consider a filter for the fresh air inlet and the exhaust. Critters and debris will find their way in. Be careful running it going down the road because of CO.

@csorrows

8 күн бұрын

CO2 won't be an issue; the air being taken from outside goes back outside. There is a partition inside the unit.

that ac is gonna make a lot of condensation.... hows it gonna drain the water bro?

Outstanding and awesome as always.Thanks for sharing and taking us along

For your additional seating you could make it able to convert to a desk from a seat when you need it.

I had mentioned before, this catching a strong cross wind going down the highway is going to be iffy.

@abdepner

16 күн бұрын

It’s 11,000lbs, wind won’t affect it like a regular trailer, they should consider rear airbags though (or did they have that already hence the compressor hoses lol)

@1ronco

16 күн бұрын

Should have watched Riley on Ambition Strikes build his out of aluminum

I’ve done this before in an enclosed trailer and it works very well. It will collect water though. Just drain it somehow.

Great progress guys

In addition to the heat load from the environment, please note that the inverter puts out a fair amount of heat into the cabin. If you are running the ac you will be drawing a significant amount from the inverter.

You should have called Tavarish and asked for Gold Tape for your duct work😂

Oscar wasn't interrupted while talking!

So, 2 things on the A/C, 1- as many many people have mentioned you need homeplace for the condensation to run or youll both flood the A/C and you'll rust out the metal around it. 2nd thing, heat rises. Im all for taking the air from the bottom so its cool air, but "gravity" doesn't apply to hot air, dont cut the side. My suggestion, do what they do with residential gas furnaces and put a vent through the roof with an RV rated roof vent, the inside can be normal HVAC or PVC piping as it shouldn't get hot enough to melt it or youve got more pressing issues 😅

This is looking so good, I like the chrome accents and can't wait to see the interior

May want to add 4 or 5 fire extinguishers. You know, when the wiring goes bad.

Are you going to do any kind of design on it? Right now it's got a SWAT vehicle look going on. An A-Team stripe would be just enough, I think😉

@Ridex0076

14 күн бұрын

I don't know why, But its looks like a garbage truck from behind😕,he really need to change the colour

Gotta admire the way these guys decide to just go ahead and create these vehicles. The exit vent looks fine in chrome

This entire build has so many learning opportunities in it…😂 love the dedication, creativity and resilience during the process!

ram 3500 GVWR is 12,200. the 4500 has a higher gvwr (~17K) with a stronger frame. yes it's too heavy lol

@jerrywilcox9890

16 күн бұрын

It's legal

@AnIdiotwithaSubaru

16 күн бұрын

@@jerrywilcox9890 they still have a lot of weight to add with the interior

@jerrywilcox9890

16 күн бұрын

@@AnIdiotwithaSubaru it doesn't matter they will still be legal.

@jerrywilcox9890

16 күн бұрын

@@AnIdiotwithaSubaru that crap isn't going to weigh that much.my gooseneck with 5 cars on it weighs way more than that thing on the back.

@willkaufman1029

16 күн бұрын

The GVRW on that 3500 is 14k

Did you ever see the Pic of the ram with the giant bed camper that bent the frame

@JordanAhughes

16 күн бұрын

They’re gonna see it in real life. 😅

I just drove through Portland and was thinking about you. Stay healthy and happy.

The campertruck looks really good on the road!! 👍🏼👍🏼👍🏼👍🏼

Where is the water from the AC going to get out?

@TylerDurden-pk5km

16 күн бұрын

On the hot side of the heat exchanger, improving its efficiency - then: exhaust it out with the warm air.

Fist? Is this the wrong channel? Lmao

I've seen another YT channel do a camper build/rebuild and one thing they did which saved them a TON of money, was buy a crashed camper with structural damage and picked it clean of parts into their project, saving thousand.

6:36 that ac idea seems cool. Good luck

Hopefully the AC doesn't suck in any vehicle fumes..

@curtisjmurphy

16 күн бұрын

The cold (insde) and hot (outside) parts of a window AC unit are are mostly sealed and seperated besides a few drain holes. Contrary to what most people think the do not move any air into or out of the building. As long as thier ducting is sealed well CO shouldn't be an issue as any fumes that are sucked in will pass through the hot side of the AC unit and be harmlessly vented back outside. I hope they isntall a CO detector either way.

Test driving a fist is crazy twinnnn

Actually love the look of this thing

Chrome vents look great. Keep them.

On the A/C you should be pulling the cool air from the cabin so it’s recirculating the air and not always pulling in hot air from outside

@Gizmetti

15 күн бұрын

It is bruh, its doing both

@adamtitus8670

15 күн бұрын

@@Gizmetti no that ducting is pulling air from outside not from the cabin

@Gizmetti

15 күн бұрын

@@adamtitus8670 It's doing both... do you not see the big ass filter on the front of the AC?

@Jasta315

14 күн бұрын

It already is. There are 2 separate air systems on an AC. The inside air that sucks in the front filter then out the front vent, and a separate system that circulates outside air through the condenser then back outside.

@adamtitus8670

14 күн бұрын

@@Jasta315 no air is brought in from the front of the unit the air comes in from the sides and top and the hot air goes out the back and the cold air goes out the front

Truck exhaust under the truck. AC intake under the truck. I know it is ducted, but is it possible gonna be bringing carbon monoxide inside?

@Azimuth0001

16 күн бұрын

It might suck in some exhaust, but the exhaust-filled air will only be used to cool the AC coils, then expelled outside. None of it will be circulated into the cabin. The carbon might eventually clog the heat exchanger, but there’s not a health risk.

@yusufabdullah9655

16 күн бұрын

It's not ac intake it's thermally exchanged air it's not what's circulating in cabin it's what goes through the heat exchanger

It looks excellent

love this thing! great progress!

Fist test

@8:54 "It's gonna be a good time" just so i remember he said this for later.

Just a thought, use a mini split unit. They don’t pull a ton of power so it should work on a 20 amp circuit depending on the u it you get, you then also can have much small holes in the vehicle to keep the weather out. They are also waaaaay more efficient and provide better airflow

Chrome looks good!

Rip on the first campsite road tree branch

@jerrywilcox9890

16 күн бұрын

What are you talking about my camper is taller that that thing si I highly doubt it's hitting anything.

✊ fist

Awesome looks good on the outside

One thing about that fresh air intake is that it's under the truck, which means any and all fumes that are under there are going in that cavity/box... and if that cavity/box is not completely, utterly sealed, you'll be filling the truck with fumes. I might consider a different location, like the side of the vehicle, or the top, but you guys do you guys.

Fist 👊

Fist!

That thing is sweet, love the look.

Lean into the chrome accents! Hell yeah.

I agree! Not bad at all! Pretty,... pretty,... pretty...pretty good! I subscribe to many similar channels as BIFB, but this channel does a great job of making something different from what it was intended to be. I love that approach. When BIFB begins that boat project in the future, you know that's going to off the hook! Very impressed with the camper project. The yacht recovery is high on my "impressed" scale, too!

The reason RV AC systems are on the roof is so if you have an exhaust leak, you don’t immediately die. You should reroute the intake to at least next to the exit on the side.

@csorrows

8 күн бұрын

A/C units recycle inside air. The outside air is only used to remove the energy displaced by the process. You made an invalid point about something you know nothing about.

Gonna have to get rid of the water too. Camper roof ac drips outside the unit. That's gonna drip from the bottom

I like the chrome!

What is a fist test? Isn’t that specifically designed for marriage?

@kylewise3111

16 күн бұрын

😂💀

@blake_detailer6149

16 күн бұрын

😂🤣💀

If your pulling air from under the truck, better make sure you don't get an exhaust leak.

@wodiexbb

16 күн бұрын

I would think that the fresh air is meant to assist with the cooling of the coil and exhausting and not going into the interior. It's on the side of the unit that is normally outside.

@justindeyoung9968

16 күн бұрын

Very true, thank you for the correction

First off LOVE this build! But with an AC mounted low you need an exhaust fan near or on the roof to exhaust out hot rising air so the cool air that does not rise to fill the area of the camper. Remember even if you insulate really well you have a black metal box in the end. Just a thought but if you used a mini split you could knockout a 2 for 1 with AC and Heat with a low power consumption. Please keep working on this build it is one of my fav's.

Love it!! Please flip one of the running lights on the rear so they precycle mirrored, would look awesome!! Does give me Jeepers Creepers vibes though 🤣

Pretty sure I left a comment saying this was going to be WAAAAY too heavy. There's a reason they use wood and fiberglass in campers, an aluminum in trailers.

Fist comment 😅

Parking tip for class B/C campers: select a parking space at the edge of the lot, back into the parking space and hang the ass end of your rig over the grass. Voila! It fits!

Great job!

Fist lol 😆

Fist.

such a sick build

Nothing like a Fist test drive. 👊

Fist

I would consider some body seam sealer in all those joints prior to installing your insulation. That stuff is made for that exact application. Its thick enough it shouldn't squeeze out onto the exterior either, like the paint did. If not at least some caulk.

Looks like an Airport Shuttle 😎✈

B is for build crap