When I think my job ,or life sucks, I watch this, it puts things in perspective.

@stevejette2329

9 ай бұрын

jeff - But how can you be REALLY sure your life does not suck ? just kidding. I had a paper that had all the people of the world condensed to 100. What percent by age, religion, ethnicity, race, money, etc. Bottom line was that if you were READING on your COMPUTER ... you were WAY AHEAD of the vast majority.

@oldfarthacks

9 ай бұрын

@@stevejette2329 So very true. If you have electric power, you are ahead of the bottom 50%. The same 50% if you can read. If you have a computer you are ahead of 75%. If you have a modern computer, you are ahead of 80%. If you are sitting in a nice clean room, with heat and air, you are in the top 10%.

@martinswiney2192

8 ай бұрын

My machine shop is air conditioned. Where does that put me?

@user-pw3mx6if9s

8 ай бұрын

Да вы правы. Всё познаётся в сравнении. У кого то суп жидкий а у кого то бриллианты мелкие.

I like the way these guys just beat the crap out of stuff. Obviously lots of years of experience.

The wobble of the drill bit is priceless...😂

@FrustratedBaboon

4 ай бұрын

They fixed it and there's your dinner.

Love watching these guys, good video and thanks for showing us 👍 👏 ❤

ADMIRE THESE GUYS. NO MATTER WHAT, WE THINK OF THEIR WORK ETHICS. THEY KICK ASS. GOD BLESS THEM

Немецкая точность, аккуратность, хирургическая чистота, инженерная изощрённость. Всё, всё прекрасно!

@ja53rm28

8 ай бұрын

И все это Пакистан )

@oleksandr_ivanchenko

8 ай бұрын

точность не повредит. но зачем для этой детали хирургическая чистота? похоже они от рождения инженеры.

@mr.profit6964

8 ай бұрын

для дебилов нужно писать, что это был сарказм!

@user-sz2mh3tr1o

5 ай бұрын

Только всё это от нищеты делается , по хорошему берётся целиковая болванка подходящей марки и вытачивается, а это называется говноляпство которое долго не проходит . Если уж цельной вал сломало то почему все эти вставки должны держать такой вес.

Hats off to these guys ! Standard of living a bit different from us wealthy folks so repair it ! 👍👍👍👍👍👍👍👍

16:05 RIP the bearings in that lathe head.

@ferolcat2009

4 ай бұрын

No precision here. It's a case of, it'll do, close enough. Lol.

the fact they have these holding jigs makes you think this is a weekly occurance!....still pretty amazing..

@davek8409

5 ай бұрын

Yes, A jig ready and waiting? WTF??

They must have the best foot doctors in the world over there and the most numerous .

One redeeming thing about this for me is that, in the 3 houses I have owned, I have never had a garage, just a carport, and never had concrete to work on where crawlers or other things with wheels would work, just gravel or dirt. I've laid down 3/4 inch plywood over ground so I could use my engine crane. Plus, it seemed, that every big project I had to accomplish was in the dead of winter where it was in the 20's and 30's with the ground like a block of ice to lay on. So, watching these fellows working with dirt for a floor is catharsis.

Riesengroße Achtung und Respekt , vor diesen Fleißigen Menschen ! Klasse !!!

@albinklein7680

9 ай бұрын

Was ist an dieser Scheiße "klasse"? Das hält keine fünf Minuten und Leute sterben wegen so einem Mist. Diese Idioten haben keinerlei Respekt vor Menschenleben. Die geben achthunderttausend Rupees für bunten Schmuck an ihren Lastern aus, aber haben keine sechzigtausend für Bremsen oder einen neuen Achsschenkel übrig. Ich war schon oft in Pakistan und das macht mich nur noch wütend. Die haben einfach den Schuß nicht gehört.

Здорово они плющат молотками рабочую часть при разборе, потом херак в песок.....сомневаюсь, что ее потом помоют

That’s one more use of a lathe that I had not anticipated..!

Muy recursivos , todo lo reparan muy bien 👍

All osha approved. Love the safety sandals

Safety glasses, safety gloves, safety toe sandals? You betcha. These guys can build anything with a torch, big hammer, hydraulic jack, lathe, and a pair of tweezers. I would hope that these guys get paid a decent wage for their area. Unbelievable people. If Pakistan and India has truck weigh scales, these folks would be out of a job. Great work, great videos.

@stevejette2329

9 ай бұрын

fro - Like the Cubans who keep U.S. muscle cars from the 50s going, in spite of not having replacement parts. Making parts, repairing, improvising, sometimes with boat motors ...

@jorgetonda4585

9 ай бұрын

K. .ń

@amyhund3786

8 ай бұрын

Sie haben unsichtbare Sicherheit Handschuhe , Sicherheit Sandalen mit unsichtbarer Stahlkappe und natürlich auch Sicherheit Kontaktlinsen. Top Arbeitssicherheit

I believe the secret behind these repairs and the faith they have in them lays in the coating of the weldingrods they use... This is made of the same material used to make the safety flipflops/slippers/sandals they use which is a secret compound but highly effective and resiliant .......

@Barmaley80x

4 ай бұрын

Safety flipflops... LOL ...

good work guys you are professional. i like this video thank you

You guys are so cool love watching you

Wonderful People... Great ingenuity and talent for work...!!!!! ( Gente Maravillosa... Gran ingenio y talento para el trabajo...!!!!!)

Muy bien explicado muchas gracias

Exelenteeee trabajo mis hermanos Saludos y bendiciones desde Monterrey NL México y le mando su merecido like 👍 🙏

Congratulations from Brazil. 🔝🔟👍👏👏👏

Je vous admire ! Vous êtes géniaux .

Soy de oaxaca México abrazos los admiro por compartir su trabajo espero me manden un saludo. Bendiciones.

These guys get good value out of every piece of equipment they have and use. Not at all wasteful of materials, time maybe.

Nothing's irreplaceably broken when men of ingenuity reside.

29:00 "When I nod my head, you hit it."

Gostei muito de ver essa usinagem Lembrei do meu tempo , de 1988. Kkkkk. Parabéns Para esses guerreiros 👏👏🌹

you guys are pure genious

Super, c'est très bien réaliser.

Actually, I believe that parts are difficult to get and if they can find it it would cost them a fortune to buy. So it's more about self reliance than anything else. Also I honestly think they are are undertaking those repairs in the most practical way...bear in mind, that is not America, where you can buy cheap parts on every corner. They're very brave and hardworking, patience and have a good understanding of metalwork

@Shmayzer

6 ай бұрын

Нихрена они не разбираются, делают как попало. После такого ремонта в металле адские напряжения, как минимум нужно пару циклов термообработки для того что бы эта деталь не лопнула после 1-2 тыс.км. Даже в таких условиях можно было сделать нормально. Но капитализм в этих странах заставляет сразу работать вместо того что бы учиться. От нехватки знаний вся проблема.

@schsch2390

6 ай бұрын

Parts such as this are not 'cheap' and in US the legal liability for such a repair, even done to closer to first world standards would be so high that no repair shop would contemplate it. Now an individual on his own vehicle, maybe but even there the liability should someone else be injured would be high.

@w.w77

6 ай бұрын

You are kidding right? This is garbage repair. If they caused an accident and severely injured someone here in Australia, and inspectors find that it was the repair that caused it them they would either pay a big fine or face jail time. If they can't afford the part, then take the truck off the road until they can that repair is not safe at all, especially when you are talking about a part that has to handle heavy loads and heavy impacts on rough roads.

@rosewhite---

6 ай бұрын

@@w.w77 You are a fool! These guys are working for peanuts! A new shaft would probably cost more than all the men's monthly wages - and maybe import restrictions mean the genuine part is unavailable!

@robs7741

5 ай бұрын

Did you know that these cheap parts found on every American corner are made right there in India? Now you know.

Just get on!! Love the way they all muck, no moaning!!😊sound❤

Класно, техника безопасности на высоте, босыми ногами, голыми руками и в ночнужках

@user-cc9hi3kt4u

6 ай бұрын

их проблемы, тебе то что?

Love the uniforms and safety foot wear

In the time it takes to make this repair a good machinist could make a brand new axle. Its a simple part with few critical fits and not much material to remove. A smart machine shop owner would have these ready made in stock. Then they would have a new shaft they could throw in the dirt.

It was nice to have the right fixture!

The most terrifying horror movie I've ever seen!

Impressionante o trabalho, parabéns

Essa emenda vai ficar muito boa os cara sabe muito mesmo .

It takes a lot of faith to think that this repair is going to be even half as strong as the original axle. Good luck with that.

@bobbofly

9 ай бұрын

Yep, just now thinking the same 💩.

@benk7081

9 ай бұрын

It's a joke.

@MrSychnant

9 ай бұрын

But they only charge $20 for the repair..

@christiaanwillemvannood4171

9 ай бұрын

@@MrSychnantI ,have a lot off respect for these people

@benjurqunov

9 ай бұрын

That's not an axel they repaired.

Very beautiful and strong work

Questi meccanici nonostante i pochi mezzi tecnici ha disposizione fanno dei miracoli Bravissimi

Love his steel toed safety shoes.

Omg I know these guys aren't working to high engineering standards but those off-centre holes are doing my head in

These broken axles must happen quite alot for them to have a pre-made jig for removing the spindles.

@waxblade4645

8 ай бұрын

Oh, this truck will be back soon.

@Barmaley80x

4 ай бұрын

Если они занимаются грузовиками, то эта штука не останется без работы

Mấy anh thợ qúa giỏi qúa tuyệt

Bom trabalho 😁👍

Aferın bu torna ustasına. Kırık orta bağlantı milini çok güzel kaynattı. İşin zoru tamirciye kaldı. O kadar ağır parçayı şaşiye monte edecekler. Kolay gelsin ustalar.

There is a marvelous new invention called a "workbench". Much more efficient than working on precision parts in the dirt. It also keeps parts cleaner!

@georgegonzalez2476

9 ай бұрын

yes indeed, but a workbench would cost them the equivalent of two month's wages, and they're already spending every penny on food, clothes, and shelter. Nothing left over for such a frill as good tools, power tools and a clean and comfortable working environment.

@tedhicks5431

9 ай бұрын

All they have not bad work

@hoseman317

9 ай бұрын

they do however have money for cell phones!@@georgegonzalez2476

@horstmuller7512

9 ай бұрын

Never forget, these guys are extremly poor and also have to feed their 10 children every day. Most of them are so hungry, after some minutes they can't hold their newest smartphone no longer, it falls off their hands and breaks on the floor. So sad.

Почему у них один резец на все случаи жизни, резьбонарезной😂

Красота! Через два три месяца снова на ремонт!

Спасибо вам люди что снимаете так здорово. Особенно как они разговаривают ну а за работу то вообще СУПЕР.

@mr.profit6964

8 ай бұрын

работа супер? ты хоть что-то знаешь о напряжении металла? о закалке? они испортили все, что можно было испортить и даже больше.

@user-cc9hi3kt4u

6 ай бұрын

@@mr.profit6964 ты бля знаток напряжения, лежи на диване и попёрдывай

Wonderful work by these guys, I would imagine that any mechanical breakage is fixable when everyone else has just scratched their head. Brilliant job guys and thanks for sharing your skills with us. So very well done!

Work Hard and Win The World.👍

When your only tool is a hammer... Everything looks like a nail.

I’ve watched a few of these road side repairs for the amusement content, fair enough they do their best with what they have, but you just can’t weld together original special heat treated heavy stressed parts such has axles and crankshafts, there potential dangerous failures. And the health and safety, wow, open welding at side of the road,, flip flops, and I’m still waiting to see a concrete workshop floor with work benches. But on the plus side these are the guys you’d won’t with you when you’d broken down miles from anywhere. Great stuff.

I can't help but wonder how heavy the hammer with the colorful handle weighs. A real Commander!

Stronger then it ever was.

Super hard work but as usual we westerners cannot believe the repaired part will be as strong as the original item!

Эти люди если работали бы в наших СТОшках то были бы самыми популярными знаментостями.

@mr.profit6964

8 ай бұрын

С точки зрения сопромата - это не работа профи, а полное говно сделанное нищебродами, сочувствую людям вынужденным ездить на таком говне, особенно в горной местности, это самая короткая дорога к Богу.

@user-vp6fg9ti1l

8 ай бұрын

@@mr.profit6964 да я то говорю в смысле упорства халтуры. Их просто нужно научить что и как и они попрут. Они народ трудоголики одни в основном.

@mr.profit6964

8 ай бұрын

@@user-vp6fg9ti1lК превеликому сожалению, никого и никогда невозможно чему-то научить, или человек учится чему-то сам, или не учится, а трудоголиков в любой стране хватает. Вопрос лишь в заинтересованности, тут просто вопрос выживания, они делают это только потому, что не видят других вариантов, а они есть всегда. Отсюда логический вывод, да, они могут что-то делать руками, но совсем не применяют голову. Отсюда и бедность и трудоголизм.

@user-cc9hi3kt4u

6 ай бұрын

@@mr.profit6964 самая короткая дорога на сво пойти за путло

These poor dudes are always working in the dirt, on the ground, with makeshift tools and they are filthy dirty all the time. But they get it done somehow. Amazing.

One of the first things they teach you is to never hit leaf springs with a Hammer. It stresses them, susceptible to breaking at point of Impact!.

how these men have all there toes amazes me.

احسنتم وبارك الله فيكم

Fantasic good job. Well done

Absolute astonishing! This must have been one of the best kept secrets from pakistani rocket sciences. And I'm sure, most tolerances are guaranteed less than 2 fingers.

@haynillesen

9 ай бұрын

Their neighbour went to the moon!

@alivdee9946

9 ай бұрын

It's a very simple fitting system. Either it fits or it doesn't ...😉

@horstmuller7512

9 ай бұрын

@@alivdee9946 Makes sense. And to be on the safe side, all tolerances should be between 5 and 10 fingers.

incredible!

Wow, he has a micrometer to measure stuff, that's a new tool.

Все как мы любим))) Мы хотел опробовать а они это реализовали)))

First thing it comes to my mind when I see videos like this is ''they toookk our jobs ''' :))

I saw that! Things can go wrong easily when people are watching you work. LOL

good work

amazing. strong people

Блин я в трансе,почти. Это жжжж надо,наши до потопные технологии ремонта на коленке возродились в Пакистане. Я не удевлет таким изломам. Видя как он нагружают свои грузовики и по каким колдобинам ездиют.😢

Przepiękne jest to zrobione pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍

It was a miricle that they brought this back to life with primitive tools .

Dengan alat yang sangat sederhana anda bisa memperbaikinya luar biasa

Good job, greatings from Germany to the working man, you can do all you will with good workers

Esté es un trabajo excelente un fuerte saludo 👋 a la audiencia del canal 👍🙏🤝🇷🇺🇨🇺🌟🌟🌟👈

Quá tuyệt vời đẹp

Glad I'm not putting my life or other peoples lives at risk driving that truck

Молодцы парни!

That drill bit looks 100 years old .

trabajadores como estos ya no aparecen en los países industrializados aquí ya no realizan esos trabajo en españa desde hace tiempo

Wow Nice SkiLl : Молодцы парни

Forget the suspension, weld the axles to the frame

This whole process just screams quality. 🙂

@BobSmith-mc7uq

8 ай бұрын

LOW quality!!

На таких оборотах без охлаждения ? Как это может быть ?резцы и сверла у них из инопланетной стали , наверно иначе они бы сгорели .

@user-cc9hi3kt4u

6 ай бұрын

видео ускореное

I like the way he indicated that peice in.

Do they have to throw every single thing in the dirt before they work on it?

All that done while wearing sandals! 👍

Wobbly drill in the center hole

It is interesting the standards of safety around the world. The transportation, the work conditions. This video could not be done in Europe or North America, well with the exception of Mexico. I do love it though, they couldn't get it with their fixture and so they went to the Big Press.

I HAVE MORE SCARES FROM 7018 LO HI RODS THEN ANY OTHER RODS. THE FLUX CAN STICK TO SKIN, WORST WHEN IT FALLS IN THE GLOVES , HOW THESE BROTHERS DO IT IS BEYOND ME. 👍👍👍👍👍👍

Это п***** как он бьёт по оси балансира😢

The thumbnail makes it look like they are a sort of mech elf. They look tiny, their voices are also chipmunked, lastly they don't sweat or swear like hell.

@robertfairburn9979

4 ай бұрын

The video is speed up giving the chipmunk sound

Un lujooooo

Nice video