This is a professional at work. When you see that we can operate a lathe here in our Sunday best and what they do there with very old lathes, I take my hat off to you. I have a lot of respect for these types of professionals because that's what they are, really old professionals. Putting a lathe in a small space and doing this kind of work is craftsmanship at its best. Much respect for this man.

@JOEZEP54

4 ай бұрын

True Craftsman working with what he has.

Me gusta mucho mirar como trabajan estos maestros saludos bendiciones para todos ustedes y sus familias con salud espiritual física y económica así sea saludos abrazos

Mesmo com falta de ferramentas sofisticadas, conseguiu executar um belo trabalho, com tanta humildade só poderia ser agraciados por Deus, sejam felizes ☘️🙏

Phenomenal work! all in a backyard metal shop, but obviously aware of the importance of accurate measurements (without any digital tools), as the frequent use of calibers shows. Well Done sir

@interestingmechanics00

8 ай бұрын

thanks for appreciating

@user-nz4iy7lo3y

7 ай бұрын

they are caliPers.

Who have to do your best with what you have to work with, not everyone has the money or resources.

ฝีมือการซ่อม เยี่ยมมากครับ

Brilliant job .

Have to say for some people criticising on this repair. You got everything in your country. Very fortunate. These boys are doing good work with what they got. There's a lot of people doing the same to keep shit running all over the world.😁❤

@interestingmechanics00

7 ай бұрын

thanks alot for support

This man has great skill Look at the machine and material he has to work with. WOW.😊

Nothing better than rusted salvaged ship steel lol

Parabéns para esta equipe , mesmo sem recursos o trabalho foi feito.

Excellent travail 👍👍👍

Three points. No music. Good. Sped up content that also speeds up the audio. Not good. No narration or sub titles. Not good

Selalu ada cara untuk mengembalikan ke kondisi semula Keren banget

Super jest to skrzdło żurawia odrestaurowane pozdrawiam serdecznie 👍👍👍👍

@interestingmechanics00

7 ай бұрын

thanks

Когда на первых кадрах увидел пижаму, понял что видео будет интересным))

Excelente trabalho.

@interestingmechanics00

8 ай бұрын

thanks U like it..

Belo trabalho, saudações, Brasil

Looks like a genius cobbled it once before

Привет классная работа 👍👍👍👍

The final installation of the base plate should have longer, where the new plate goes beyond the repair basically the load on the stick with the bucket will be right where the base plate joins and will be its weakest point. Has it failed since?

Keren banget mesinnya 5:02

Great work lads , next time put a rag in the Boss holes to stop weld spatter getting in . good repair .

@interestingmechanics00

8 ай бұрын

Good tip!

Very good video. Very beautiful machine. A thank you to you. It's great that everything is fixed. Great channel I like it very much.very good mechanic, Thank you very much for that💐🤘🌆🎉❤

@interestingmechanics00

7 ай бұрын

Thank you too!

за приспособу для резки отверстий 👍

You didn’t use the zig zag joint to join the repair part to the old arm. Mistake.

A vederlo fare sembra tutto facile. Invece è difficilissimo. Siete dei maestri. Complimenti. Da noi in Italia scavavi una buca in giardino, chiamavi un "sacerdote", facevi fare il rito funebre e seppellivi il pezzo defunto non riparabile. Poi compravi una macchina operatrice completa nuova. Amen

@interestingmechanics00

8 ай бұрын

thats the work i do ... you are right it was not an easy job but i have done with my skills and aim to the work hard

одно радует, что сварщик не в тапочках.

VERY IMPRESSIVE 👍

NICE JOB

Weltmeister im Schweissen !!!

That boom was pushed beyond its SWL and that figure is even less now. Same again next week lads?.

Brilliant work!!!

@interestingmechanics00

7 ай бұрын

Thanks a lot!

Great job. Thanks

@interestingmechanics00

8 ай бұрын

thanks

Pakistan gitu loo....

Esse pessoal trabalha bem, poucos recursos, mas são mestres no ofício. Parabéns

@interestingmechanics00

8 ай бұрын

thanks for appreciating

You want it bad. You'll get it bad. The worse you want it, the worse you'll get it.

Amazing!!!

Just great work

@interestingmechanics00

8 ай бұрын

so called nice work

Yo hubiera cambiado solo la parte final, pero buen trabajo.

@interestingmechanics00

8 ай бұрын

ho would u weld that part with damage an too many welded stick

You guys are AMAZING...nice work

@interestingmechanics00

8 ай бұрын

thanks

good job

Ha yahshi jamoa

In America, we could learn alot from your resourcefulness & team work

@interestingmechanics00

8 ай бұрын

yeah then viral my videos in america😝

сначала ушатать как бог черепаху а затем героически починить) умеем, можем, практикуем.)

@interestingmechanics00

8 ай бұрын

we can do it ...

احسنتم ممتاز

big like

Good job

👏👏👏👏👏👏👏👏👏👏

Amazing work! :o)

Like goodjob

Los trabajadores parecen salidos de la era primitiva es un pena porqué trabajan bien

@interestingmechanics00

8 ай бұрын

we live in 2023 just for lake of resources we do this type of work ... in 1st world countries this type of repairs may not occur

they must have a shortage of Portland cement in India as well as work boots

Wow that pin is wore out and the pivot point is wow..Looks like the has been bad for a long time.. Sad operator just used it so long that it broke..Operator should be fired for just wreaking expensive equipment.. But lucky you have a great machinist here.. Very good a restoration. As this piece of beyond repair.. nive to see this man work.. great at what he does too. Nice video..

👍

máy này chính hãng không shop

@interestingmechanics00

7 ай бұрын

juxt imagine if the workshop may also at the europion standerd

Электроды наверное коробками затариваются 😂

@interestingmechanics00

8 ай бұрын

no no not at all electrodes have been used at it for welding purposes

Еще походит

OlhNa errado vc esqueceu faltando ferro dentro soldado ué kkk

@interestingmechanics00

8 ай бұрын

the proper work has done here some clips of work are missing in video due to editing.. it works properly and perfectly in running machine if possible i will snd u a video of it in working condition

Что за электроды используете?

@interestingmechanics00

8 ай бұрын

e6013 electrods

I give it 6 weeks before the welds break, 😊

@interestingmechanics00

7 ай бұрын

i have repaired it before 6 months and it is in working since then

No bushings? Do they fit?

@interestingmechanics00

8 ай бұрын

we have placed the bushing in it and also done the paint but could not capture the video...

Nice! Great crafts work. Open shoes and a ruler. Stay safe.

@interestingmechanics00

8 ай бұрын

would you like my work

@donalfinn4205

8 ай бұрын

Open shoes and a ruler. And?

@donalfinn4205

8 ай бұрын

Brilliant work! Would love to be able to weld like that.👍☘️

That's a good pin I need the company name the pin did not fail the boss did lol

Good job. And of course this repair comes with backlight-warranty for only a handfull rupees more.

@interestingmechanics00

8 ай бұрын

👏 for you this is not an actual repir may be in others openion but this is done for the only low coat budjet and i charged only 120$ for it... thats it

No Paint?

@interestingmechanics00

8 ай бұрын

thats the painter's job .

Can you imagine someone operating that machine to wind up looking like that? Shame, Shame!!

This is all old ship steel and junk foundry steel. It hasn’t the strength of new steel, using junk to fix junk.

@Tatarin163rus

7 ай бұрын

Зато работает это. Можно долго говорить что так нельзя, что это не хорошо. Будто в других странах такими вещами не занимаются. В России давно в металл сдали бы эту технику 😂

well they got thier monies worth out of that pin didnt they

@interestingmechanics00

7 ай бұрын

thats right

@PaulBruce-lz1lc

7 ай бұрын

What gets me is who would wear a joint so bad that it tore out like it did..no grease,nothing

@PaulBruce-lz1lc

7 ай бұрын

No ..the pin got their money's worth

@litogarnica7097

7 ай бұрын

😊😊😊😊

@user-pu5ur6ln1c

7 ай бұрын

​@interestingmechanics00 😮😊😊😊😊 สนพอใจ ,,,,,,, อะอะ

You can see these people wear sandals to work for this job, very unsafe, no sense for safety at all

Wow the one who don that has no bussines to be near machinery...

@interestingmechanics00

8 ай бұрын

it may possible in your opinion

Genius at work there ain't none here remove and replace how bout that???

@interestingmechanics00

8 ай бұрын

how u say it that was not an easy job

@interestingmechanics00

8 ай бұрын

this is the team work may b in your opinion i m not a genius...

Pisbakken staal!

@interestingmechanics00

8 ай бұрын

jxt shut up

Paint it yellow….

@interestingmechanics00

8 ай бұрын

yeah thats was the painter's job so i don't

As a retired welder and fabricator, this is NOT how to repair a worn pin and a torn bushing. By cutting off the end, you have created a weak area in the boom that will break. This type of repair comes from the lack of training and common sense. It's pitiful.

@interestingmechanics00

8 ай бұрын

u may a retired welder but i m in service we know our job very well and do guranted work for client we created inside supports for weak area just not shown in the videos ... in our country we have good worth in our field if u don't appreciate plz don't criticise 🙏🏻🙏🏻🙏🏻

@greggminkoff6733

8 ай бұрын

​@@interestingmechanics00 It still is a weak part no matter how you want to talk your way around it. Steel for the construction industry, especially batched for its application. The steel you used came from a scrapped tanker from India. You have no idea where it came from or how it is alloyed. We have a saying in the USA, 'you can lead a horse to water but you can't make him drink'. You are a perfect example.

@benk7081

8 ай бұрын

Totally agree with you. It will break again. Asked my uncle who is a professional in this field and he also said it will not hold.

@horstmuller7512

8 ай бұрын

These guys are retrained donkey surgeons. First thought they had, was to give this boom the coup de grace, but it failed.

@terrycrews2281

8 ай бұрын

look at all the experts

3:16 this stick was already repaired like this before?? They don't have grease there??

@interestingmechanics00

8 ай бұрын

yeah it was repaired already but was too much bad work done there

use of wrong tools

@interestingmechanics00

8 ай бұрын

what kind of tools should i use tell me

You never cut it straight , it should of been cut of like a Z so there is more weld and less chance of it cracking in the weld with all the force, I thought you knew better than that,

@interestingmechanics00

7 ай бұрын

you are right it will b more reliable if i cut it in z shape but i have welded supports in it thats not showen in the video clips

"Most Satisfying a Genius Man Can Do it Easily" is a dumb name.

@jamesarnold6059

8 ай бұрын

Says telephone bill?

@interestingmechanics00

8 ай бұрын

suggest a title for this video

@jamesarnold6059

8 ай бұрын

@@interestingmechanics00 boss chipmunks save the day

Damn chipmunks invaded this otherwise interesting video! Thumbs down and I'm gone...

@Country_Life_Japan

8 ай бұрын

Typical American’s 🤦‍♂️ only can hide behind the computer or phone and comment negative comments 😢

@interestingmechanics00

8 ай бұрын

so control your chipmonks

Отлично

A little grease goes along way,

Probably the owner might be saying it is the mechanic fault and the mechanic might be saying it is something else !!!!!!!🤫but the truck knows the true !!!!!!🔴🫢🤫

I think it is a regular customer!!!!! 16:36 been here before and before!!!!and probably will comeback !!!!🔴🫢🤫 16:36 !!!hope not!!