Как обычно , нет таких проблем которые бы мы не смогли себе создать,) прикрутите корпус дифференциала , и по отверстиям не пролетите и в плоскость попадете ,

@vadimjcb3cxmurmansk

10 ай бұрын

Они еще дифер не сварили!!!! Пока мост делают а посля дифер

@user-tn1no8sf8b

10 ай бұрын

Просто тут обратный процесс. Сейчас по корпусу дифференциал отолтют в сборе.

@vasilyvolkov9168

10 ай бұрын

Подскажите нахуя они этот треугольник вырезали а потом вваривали?

@Wowmechanics1

9 ай бұрын

yes shukria good

@Wowmechanics1

9 ай бұрын

hmm

It was cut in half to make this video. Nothing breaks that perfectly!

@ArmanArman-dr6zg

10 ай бұрын

Just for content,not to reuse in a vehicle

@12time12

10 ай бұрын

It broke on the previous weld, you can see it about 3-4 minutes in.

@marphymarphy

10 ай бұрын

@@12time12 I don't think so. Looks more like cut by plasma cutter ;-)

@Wowmechanics1

9 ай бұрын

Thnks

@EvilNightNurse

8 ай бұрын

The slag did give that away

This is exactly why you have 50-60 year old trucks and buses still in operation in Pakistan/India and the rest. I remember as a boy, (I'm in my 60's now) a place near where I lived dismantled trucks and buses of the era and exported the parts to these countries where they are still in use today. This is simply because they are repaired and not scrapped like we do all too easily in the west. They are the original 'repair, reuse and recycle' nations. Respect to them, the west could learn a lot from them.

@Wowmechanics1

9 ай бұрын

Very Thanks you By wow mechanics1

@sergr215

8 ай бұрын

Это из-за нищеты.Не от хорошей жизни и уж точно не забота об экологии..

@mukku9090

4 ай бұрын

who gave you this information that 50-60 year old trucks are in operation in India. Here diesel vehicles cannot operate for more than 10 years and petrol and cng 6:44 vehicles are allowed only for 15 years.

@drummingriffin

4 ай бұрын

@@mukku9090 ok, so maybe not now but over 50 years ago re: the first part od my post is correct as I knew people who worked there at the time. Thanks for the correction on the second part, I appreciate it.

@deficator750

3 ай бұрын

its called health & saftey. something thats not so readily available in india.

One side of the nut assembly should have had a smooth bore to be able to pull the two halves together. Having both sides threaded will not allow the halves to get any closer than they are when welded.

@Wowmechanics1

8 ай бұрын

Thanks by Wow Mechanics1

@user-wq6nq5fg4w

8 ай бұрын

Просто установить редуктор и потом сварить эту конструкцию точнее получилось бы

@TheSailsoon

8 ай бұрын

Agree !!!

@ferenczieugen2984

6 ай бұрын

Yes, but the "wow" team, as you can see, does not know this, the lack of logic, but anyway they work hard. All respect to them.

@herculesrockefeller1683

3 ай бұрын

I was trying to figure that out too. They serve little purpose other than the alignment is all I could figure out. I have so many questions about the process.

One thing I still haven't been able to understand is where are these squirrels that are in all the videos making these little noises... I haven't been able to see any of them yet but they are always in the videos... There must be a lot of them because they play all the videos. communicating with each other, with these little noises...

@stevemull2002

Ай бұрын

Im sure they are Chipmunks, but as you say, invisible ones

@ronnieD1963

9 күн бұрын

🤣🤣🤣🤣

Гарантийный ремонт.

@aamirmalik9987

10 ай бұрын

U r right but it's look like genuine, but u can't complain warranty over here

@user-yu5by7nb8r

10 ай бұрын

​@@aamirmalik9987зачем треугольник вырезали ,а не сверху наварили ?

@user-zb5dl7jf4o

10 ай бұрын

​@@user-yu5by7nb8rизменили направление усилий (направление сваревоемого метала PS смысл в том что таким образом они усилили(как не странно

Если снимали мост, то и редуктор сняли. Можно было прикрутить редуктор на место, и он бы сам выставил половинки моста ровно, и обварить трещину. Без этих гаечек-болтиков.

@Wowmechanics1

5 ай бұрын

Our pleasure! sir

Какую функцию выполняли приваренные гайки? Для регулировки соосности если, то каким образом это можно сделать этими гайками??

@Wowmechanics1

10 ай бұрын

yes

@Alik_Russia

4 ай бұрын

это как спрятать голову на против человека и думать что он тебя не видит🤣🤣

I've never seen these broken, they must abuse that heck of these trucks, now if it broke as original, will it hold welded like that?

In the Western world these items would be scrapped, kudos to these guys making the repairs!

@Wowmechanics1

5 ай бұрын

Our pleasure!

It's amazing what can be achieved when there are no safety regulations to adhere to. :/

@snowflakemelter1172

10 ай бұрын

Mostly involving a badly welded truck ploughing into a school.

@ferolcat2009

10 ай бұрын

@@snowflakemelter1172 And the rest. I was being sarcastic not admiring. Human life is cheap over there, they'd be more concerned of the cost to rebuild the school.

@Wowmechanics1

10 ай бұрын

hmmm tnks

@Wowmechanics1

10 ай бұрын

hmmm tnks

@bertfromnz9069

8 күн бұрын

or any warrantees

Back axles have been wwelded up from pieces for many years and never really fail thanks to weight regs and weighbridges making overloading an expensive criminal act. This repair seems to be two good halves welded to make one. I'd have welded on some extra strengthening pieces but then in normal use does th ebanjo get massively overloaded Lots of these vidoes feature truck axles that have broken at one side due to wear and overload and bad roads so I think here they took two good halves to make one good complete one.

@Wowmechanics1

9 ай бұрын

Thanks

ผมชื่นชมทีมงานมาก ที่ทุกอย่างซ่อมได้ แต่ด้วยความเคารพ ถ้าประเทศไทยเราทิ้งไปแล้วจริงๆ ชื่นชมว่าทีมงานมีฝีมือมาก ขอบคุณ

Can you imagine the load, or shall I say the overload, this truck was subjected to.

@Wowmechanics1

5 ай бұрын

Thanks 👍

In an after note, the weld held until the driver overloaded again, about 6 hrs after he got the truck back.

@Wowmechanics1

10 ай бұрын

hmmm tnks

А зачем вообще его разрезали?! И зачем весь этот цирк с подгонками? Возьми редуктор и скрепи им обе половинки, вставь полуоси и спокойно обваривай - ничего никуда не сместится.

@Wowmechanics1

10 ай бұрын

ye right

@user-jp7uu5em4v

8 ай бұрын

Это волшебное шоу с гайками и болтами, которое не регулирует ничего)

@MRooodddvvv

8 ай бұрын

Похоже его сварили из двух. С гайками тоже не понял в чём смысл был этого ритуала.

@Alex_Railnolds

8 ай бұрын

​@@MRooodddvvv, гайки вообще бесполезны были, потому что они ничего не стягивали. Ну разве что просто удерживали две половинки.

@garyr7027

8 ай бұрын

That's what I was thinking, they could assemble it with the parts that's supposed to go in it, use the parts to align the housing then weld it up. Take the guess work out of it and be assured alignment is spot on unless of course they didn't have the parts on hand.

судя по увиденному это просто имитация работы рассчитанная на диванных зрителей, не более.

@Wowmechanics1

10 ай бұрын

....

@user-lb5bl5mj2f

8 ай бұрын

Да вы совершенно правы,это видео рассчитанное на просмотры,но не как не ремонт.

@edsonlima2839

23 күн бұрын

O que importa foi a ideia mostrada, você faria o mesmo ? 👍

@edsonlima2839

23 күн бұрын

Eu sempre aprendo alguma coisa vendo estes vídeos... Obrigado amigos ! Usem sempre equipamentos de segurança..👍👞👓

A neat little job .A couple of observations, though : 1 . Top notch fabricating. Work with what you have . 2. Boots gloves safety glasses would help them out . 3. Get it up off the ground. I would build a fab table. Instead of working on my knees ! 4.Some old timey classic country music . You know Cash Waylon Willy would do ! 5 . Some Beers don't see no empty crushed beer cans ? It wouldn't take much to straighten that axle housing out .....!

The triangle patch puts two of the primary welds into greater shear stress. Welds are ideally placed in shear. This welder/fabricator is good.

@Wowmechanics1

8 ай бұрын

Thanks Sir

@howder1951

6 ай бұрын

Thanks, I was wondering about that.

Можно было сразу установить редуктор чтоб выставить ровно чем болты с гайками

@nightshadow5328

10 ай бұрын

Герметик и напильник все исправят)))))))

@Wowmechanics1

10 ай бұрын

hmmm tnks

@MRooodddvvv

8 ай бұрын

Тем более 2 гайки не дают возможность ничего регулировать

Esse caras são os mestres na arte da Solda!!! Parabéns um belo trabalho👏🙏🏻✌🏾👍👍👍👍

@dundaryasa5401

10 ай бұрын

Welding is not done without opening the weld mouth. to make weld mouth they should make V mouth.

@Wowmechanics1

9 ай бұрын

hmm Wow....

@Wowmechanics1

9 ай бұрын

hmm Wow....

World builders... I'm always fascinated by people applying their skills so dynamically. I wish I had teachers like some of these workers around me. Damn, what an opportunity that would be.

@Wowmechanics1

8 ай бұрын

Thanks by Wow Mechanics1

@howder1951

6 ай бұрын

Fascinating, yes, we don't see repairs like this except maybe on farms where the repair is critical. I see the reason being the disproportionate values of material parts and labour. it is amazing what can be done with a welding machine, and there are some very skilled workers out there. The parts alignment alone is quite daunting I think. Enjoyed!

I would consider it an honor to work next to these guys ANY day of the week and in the same conditions!

@Wowmechanics1

5 ай бұрын

welcme to Pakistan Whatapp no 00923005784980

Новый мост, только с завода! ))) 🤣🤣

@user-yu5by7nb8r

10 ай бұрын

Скоро в РФ все мосты будут такими ...

@RyzhyLis

9 ай бұрын

"Не бит, не крашен, но очень сильно "люблен" во все оси..."

@Wowmechanics1

9 ай бұрын

hmm

Mashallah This mechanical work is very best opportunity to work and those people doing work are really work hard to renew these cars and they are not work only for their own purpose they work for our country to build up so best of luck

@Wowmechanics1

9 ай бұрын

good shukria g

Eles tão certo é um meio de expor todo o trabalho de recuperação dessa capa do eixo trazeiro de caminhão ou ônibus parabéns pra vocês rapazes ok

Страшно представить, сколько же они грузят? Если чулок моста лопнул пополам 🤯

@Wowmechanics1

6 ай бұрын

Thanks

@alexsol8252

5 ай бұрын

он не лопнул, сварили из двух

I'm curious how all of the bolt holes line up once they get it back to the truck . I guess they can fix anything with enough welding rods and hammers . But why did it crack in the first place , over loaded , bad roads ? Both 😂

@tordarbast

10 ай бұрын

Its not a new banjo so its cyclical fatigue cracking the banjo. Together with overload or bad design and craftmanship. Its a welded banjo, like Scania has, I worked at the Scania factory where the banjo was manuf. There was some thermal stress relieveing operations on the scania banjo. So i believe that whne welding a banjo the devil is in the details for long life. A small material defect like poure or a welding defect at the high tension spot reduces the fatigue life a lot.

@hambone130

10 ай бұрын

It looks like it was cut in half. Maybe to facilitate taking it apart after a seized bearing. I home this guys are religious, only prayers will keep it together.

@Wowmechanics1

10 ай бұрын

hmmm tnks

@nath68719

10 ай бұрын

Damaged on opposite ends of 2. Cut off the bad left from one and the right from another. Then weld 2 good halves together to make one usable housing.

@Stingyduce

8 ай бұрын

Stop hating 😂

Можно было бы прикрутить корпус дифференциала и варить

@Wowmechanics1

10 ай бұрын

hmmm tnks

BEAU travail messsieurs ,vous ete de professionnels

These repairs are phenomenal when you consider what they have to work with. Adhering to Standards that don't exist are of no concern.

@Wowmechanics1

9 ай бұрын

hmm Wow....//

@jimjacques8167

9 ай бұрын

Thanks for the update

@MrTimodon

8 ай бұрын

Lets hope they not work on an nuclear power plant!

@bensfixitpage341

8 ай бұрын

These dudes have a Titanic size set of skill, but they adhere to a kayak amount of standard or regulation.

@lenny108

6 ай бұрын

This is good for immediately selling the truck without the new owner knowing about this repair. Otherwise, this will break after three weeks again.

Those chipmunks get everywhere

Very smart and well executed.

Super inventifs, les mecs ! **Voilà de vrais mécaniciens de l'enfer !!!

@Wowmechanics1

5 ай бұрын

Our pleasure!

I love watching skilled welders

@Wowmechanics1

10 ай бұрын

hmmm tnks

THESE GUYS ARE SIMPLY BADASS, AND AMAZING. GOD BLESS THEM, AND PROTECT THEM TOO

@Wowmechanics1

8 ай бұрын

Thanks You watch vist my video By wow Mecahnics1

Melhor que o original 👍🔥🔧🔨🔩

I arrived at my grandfather's house a welder with more than 60 years of experience and I saw him shocked and destroying a table that had cost him more than 10 thousand dollars that he used to weld precision parts. I asked him what had happened, and he showed me the video, and he told me it is impossible that our land in America is so uneven and from that moment on he would weld on the floor.😔

@carlosalfonsomaciaszambran5887

10 ай бұрын

Q

@liomio4980

10 ай бұрын

@@carlosalfonsomaciaszambran5887 no entendiste ni una papa mi sarcasmo.🤭

@robertbutler8004

10 ай бұрын

@@liomio4980 I can understand why @carlosalfonsomaciaszambran5887 did not understand your sarcasm your grammar was pathetic.

@Wowmechanics1

9 ай бұрын

yes

@ftmt9568

9 ай бұрын

I can understand if you lived in Washington DC....I would agree with you that that land is crooked and not straight 😂😂😂

Great resourcefulness, but can't help think that better edge preparation would have helped long-term as well

Соосность нее не слышали 😂. Почему не поставить редуктор и тогда заварить ?

@Wowmechanics1

5 ай бұрын

hmmm

esse triangulo no final me quebrou, nunca canso de aprender com esses indianos

Amazing how straight it broke….it’s weird how it left slag behind when it broke! 😂

@autophyte

7 ай бұрын

I think they used parts from two different axle housings. Then trimmed them to fit with oxy acetylene. Hence the melted edges on both parts.

@Wowmechanics1

5 ай бұрын

Our pleasure!

@Wowmechanics1

5 ай бұрын

Our pleasure!

A very interesting repair to a cast iron split cast iron differential. I learned more again. Thanks.

@Wowmechanics1

5 ай бұрын

Our pleasure!

GOOD JOB RESPECT 🙏👍🇧🇪

amazing how it broke so nice an even

Do not believe it broke but like watching it fix.

@Wowmechanics1

5 ай бұрын

Thanks 👍

So nice👍👍👍👍

Главный вопрос: зачем он был разделён пополам? :)

@valval8957

10 ай бұрын

Лопнул от перегруза, видимо.

@Wowmechanics1

10 ай бұрын

hmmm

@user-pr3il4ot2e

8 ай бұрын

После предыдущего ремонта развалился пополам

@_Bra3ers_

5 ай бұрын

Ну, шоб заварить опосля))) Нипанятна чтоли?))) Свиноворот свиней так сказать

This is indeed "wow", but in the good kind.

Осталось покрасить и в чермет сдать 😂

@Wowmechanics1

10 ай бұрын

hmmm tnks

Hermosa Linda Video ❤❤❤

@Wowmechanics1

3 ай бұрын

hmm Thanks

Prober field repair! Nice work

They checked everything except if the diff. housing bolts will line up or wether the axels will line up with the diff. gears.

@robertbutler8004

10 ай бұрын

@guillermocarrillo3959 the repair was only for KZread viewers it will never go back in service.

@Wowmechanics1

9 ай бұрын

hmm

Instead of cutting out the triangle and putting in a new piece. They should've put a long rectangle piece with rounded ends over the top about a 2 feet or half a meter long. Basically putting a truss on it.

@Wildstar40

8 ай бұрын

Top and bottom and across the back of the diff. I thought they would have done that considering the future overloading it will be subjected to.

@Wowmechanics1

8 ай бұрын

Thanks Sir

@bigbelconut

8 ай бұрын

They should have done that on the inside and the outside.

Muy bien 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

Przepiękne jest to odrestaurowane ten cały korpus pozdrawiam twórcę serdecznie 👍👍👍👍👍👍

@Wowmechanics1

7 ай бұрын

thank 👍👍👍

hmmm good work by amazing skill

Mis reconosimientos para ustedes , y como disen en minoais Son mucha pieza , son de lo mejor en todos sus trabajos los admiro x todo el conosimiento ,de todos sus trabajos , un gran saludo desde la blanca Mérida Yucatán

@Wowmechanics1

8 ай бұрын

Very Thanks sir

Anyone know what electrodes they use here. I can never get such powerful welds with ordinary stick welding but in Pakistan these welds are incredible.

@Wowmechanics1

4 ай бұрын

Welcome Sir My Whatapp no -- 00923079516772

😂 ç est découpé exprès pour l export 😂😂 c'est considéré comme ferraille

Не думаю что этот мост долго прослужит

@Wowmechanics1

10 ай бұрын

hmmm Yes

@UlexPapov

8 ай бұрын

Два раза покрасят и станет крепче нового. В Пакистане почти всё на шпаклёвке и краске держится :)

Excellent work 👍❤️

Сами распилили, сами заварили😂😂😂

@Wowmechanics1

8 ай бұрын

Thanks by Wow Mechanics1

It's a wonder the oil stained dhotis don't just go up in smoke when they are welding. Nice looking welds though..

@Wowmechanics1

10 ай бұрын

hmmm tnks

Bravo, veliki pozdrav iz Slovenije 🇸🇮❤️❤️❤️

@Wowmechanics1

10 ай бұрын

hmmm tnks

Wonderfully work 😊

@Wowmechanics1

9 ай бұрын

hmm Wow....

Excellent video. Weld done ! 👍

@Wowmechanics1

9 ай бұрын

good

These are amazing and beautiful day on work

@Wowmechanics1

5 ай бұрын

hmmm

These men love the drivers overloaded their trucks so they can have job to work on every day

@Wowmechanics1

10 ай бұрын

ymm

my only recommendation to ensure the 2 axel pieces are welded with the right amount of GAP: hold the 2 pieces together. Get the front portion of the axel (the part with the KING bearing)...... put 3 bolts on each side just to hold the 2 pieces in place (with the holes ready to accept the front piece of the axel)....then tack weld the whole crack while the bolts hold the BOLT-PATTERN in place. Thanks.

Amazing work, like factory work

@Wowmechanics1

7 ай бұрын

Thank you very much!

이게 뭐야? 오늘도 파기로운 평화스탄~ 리어 액슬이 정확히 반쪼각이 낫군요~ 자~~~이제 작은형님이 용접을 해줄겁니다. 그럼 끝난거나 다름 없습니다,마지막에 큰형님이 8인치 그라인더로 사상을 해주고 방청유를 발라주면 새 제품 비슷하게 마무리 됩니다. 공임은 5$ 입니다. 이야~~ 웃자고 적었지만 벌써 여러번 수리한 흔적이 있는데 저걸 또 용접해서 수리를 하네~ 뒷바퀴 리어 액슬이 힘을 진짜 많이 받는데 주강품을 응력 제거도 안하고 그냥 용접해서 쓰면 얼마안가서 또 뻐개질텐데~ 진짜 대단하다.

It's Amazing All these Guys Aren't Blind , No Safety Glasses or face Shields, No Welding Helmets ! A Lot of these Guys Weld with Sunglasses or Cardboard with a Welding Lens taped on!! 😂😅😞😳😮

@Wowmechanics1

5 ай бұрын

hmm Thanks watch my video

Keren sekali

Very smart putting the triangle joint to prevent joint stress crack. Very smart.

@Wowmechanics1

6 ай бұрын

hmmm

very few material resources, but talented, creative and inventive men, well done!!👋👋

@Wowmechanics1

10 ай бұрын

hmmm tnks

I'm happy to see this video and very excited

@Wowmechanics1

9 ай бұрын

hmm Wow....

Иногда интересно посмотреть технологии позапрошлого века

@Wowmechanics1

9 ай бұрын

На сколько метров хватает такого ремонта? 😂

@user-mv3lq2rs6x

9 ай бұрын

@@Wowmechanics1 1000

@MRooodddvvv

8 ай бұрын

Или будущего..... Уже слашал историю о том как таскали машину на верёвке в Польшу потому что запчасти не пускает таможня из за санкций. Ещё немного дополнительных санкций, доллар по 300 и увидим такие технологии у себя.

Mantap Salam kenal dari palembang 👍👍

Sangat menakjubkan proses perbaikannya

@Wowmechanics1

7 ай бұрын

Thanks.. U

When the world goes to s***, them are the people that are gonna be OK. They don't waste nothing.❤

It would be great to monitor how this repair is holding over time. My guess is that it will depend on the extent of daily stress that the truck axle is under. Over-loading at this point is not a good idea. Under-loading a bit will keep the stress at a reasonable level. Amazing work and skill using what is available. Very impressive!

@Wowmechanics1

4 ай бұрын

Shukria jnaab

Greet work mack truck wheel hub repairing wxle

Wonder why they don't bolt the diff to it?

@bowlweevil4161

10 ай бұрын

same thing I was thinking, that would line up everything instead of fighting as hard as they did

@hardracer

10 ай бұрын

Me also...doh!

@Antony_Jenner

10 ай бұрын

If they did bolt the diff in, they wouldn't be able to show off their new sandals!

@lonelymtbrider3369

10 ай бұрын

Bolting the diff in place doesn't automatically make everything straight and aligned.

@Wowmechanics1

9 ай бұрын

hmm tnks

Fantastic work, congratulacions

@rafaelcampos7873

10 ай бұрын

From Costa Rica

@Wowmechanics1

9 ай бұрын

hmmm tnks

Appreciated

@Wowmechanics1

9 ай бұрын

hmm Wow....

Excelente día y excelente trabajo

@Wowmechanics1

5 ай бұрын

Our pleasure!

Amazing work

@Wowmechanics1

9 ай бұрын

hmm Wow....

am i the only one seeing this??......threaded bolt and two nuts welded on either side of the break.....and threads in both nuts??......i'll wait......someone will understand where this boat sank......

@wirefeed3419

10 ай бұрын

There is a lot wrong with this video including the two threaded nuts that will not tighten together . Since when has anything ever broken a perfectly straight line down the exact center of a differential. Additionally in terms of over load breaking, the middle section is strongest part when assembled. One of the axle arms should break away before the center would break. Any break would also be crooked and typically run from a hole to another hole. Good repair, good welding but this does not look authentic, this housing looks like it was cut in half.

@piperdoug428

10 ай бұрын

@@wirefeed3419 i assumed it was a salvage tube, the two busted halves were canned and made one good tube out of two dickered ones

@wirefeed3419

10 ай бұрын

@@piperdoug428 That’s possible definitely way more believable than being broken as claimed. Zooming in it sure looks like a cutting torch was used. I do give credit for the skills regardless of a couple flaws

@Wowmechanics1

10 ай бұрын

hmmm tnks

@Wowmechanics1

10 ай бұрын

hmmm tnks

Top Work!!!❤❤❤😊😊😊

@Wowmechanics1

9 ай бұрын

Very Thanks sir

Will last forever !

Greet work

Good job guys!!

@Wowmechanics1

10 ай бұрын

hmmm tnks

شغل جبار ومتقن بوسائل بدائيه

@Wowmechanics1

8 ай бұрын

You're welcome! I'd be happy to help you with some words or provide feedback on your video.

Didn’t know the munchkins knew how to weld. Nice job.

@Wowmechanics1

5 ай бұрын

hmm

Wow....amazing guys😅

@Wowmechanics1

8 ай бұрын

Thanks by Wow Mechanics1

Waaah cara nya mantap.....!!! 😁😁😁👍👍👍👍👌👌🤝🤝🇮🇩

@Wowmechanics1

9 ай бұрын

hmmm

Esto es una maravilla, creo que quiero vivir ahi...

@Wowmechanics1

4 ай бұрын

Welcome Sir My Whatapp no -- 00923079516772

Verry good. ❤

@Wowmechanics1

6 ай бұрын

Thank you! 😃

A ce niveau c'est de l'art