Amount of clicks: == PLACING FACTORY == - 1 click to select building type; 3 building types: 3 clicks" - 18 factories - 3 launchpads - 1 storage --> 22 clicks in total for placing buildings - Create links between buildings: 1 ctrl-click per link - 5 links between corners; 3 corners --> 15 clicks - 18 diagonal links (clicks) - hit submit (1 click) 59 clicks in total to place down layout == ROUTING INPUTS == - 5 clicks per "input -> create route -> set destination" --> 18 destinations: 18x5 = 90 clicks - 2 input materials: 90x2 = 180 clicks in total for routing inputs - 1 click to change from one Launchpad to the other: first click one, then after all the routings, the next,: 2 clicks - 1 click every time you want to set a new route for one of the factories to select that factory: 18 clicks - 1 click to select Storage -- and then 180 clicks again for the 2 input products x 5 clicks x 18 destinations - hit submit to confirm inputs: 1 click 381 clicks to route inputs == ROUTING OUTPUTS == - click factory, click 'routes', click Coolant, click 'create route', double-click the top launchpad -- 6 links per output routing - 18 factories: 18x6 clicks for routing outputs = 108 clicks - hit submit 109 clicks to route outputs == TOTAL == 549 clicks guaranteed in order to set this up; more if you submit more, make mistakes, etc. ... nice.

@Fear_Not_I_Is_Here

Жыл бұрын

I need new mouse after the 499999th click . CCP SRP pls 😅😂

"Isnt this fun? Its not even the best part yet" crazy! lol

Awesome! Could you make a video for your extraction planets? So far this is the most helpful Pi video I've seen.

Thanks for sharing, im currently running three of these factory planets now

I went as far as I could and had to train more to build more lol so back to the classroom. Thanks for sharing PI

This is the best P2 factory method for sure. Tried various methods myself but couldn't find a better way of making P2. Note that all of the p.g and cpu is taken when using this method making use of all your building capability.

roughly, bring 79,500m3 of a tier 1 and another 79,500m3 of a second tier 1 to the customs office. 31,560 of 1 tier one, and 31,560 of the other tier one will go to the storage. then the rest if the first 48,000m3 will go into one launcher and the other 48,000m3 will go to the second launcher. this should fill them all. There was a tiny bit of wasted space, so you can dial that in and reply to correct those numbers. PI ROCKS!

I still use this, love it. With the new update PI just reduced its m3 value for materials. so you can fit like double in your hull, in a launchpad, storages etc.

Very good and useful information. Thanks a lot foe sharing this!

Thanks man. Much needed.

Great job, thanks.

Hey, great video thank you so much. I would suggest getting a mouse that will allow you to bind double click to one button. It makes this process SO much easier.

Theres a lot of double links which you don't necessarily need. You can save fitting if you use less. I like to spiral my links when I have a large array.

My extractor planets (for the most part) pull only one resource, like water, or electrolytes, but not both, sometimes I put two launch pads in two different spots on a planet and extract water for example from just the nice red/white spots. Also, on small planets, you can just run long links to another extractor. In Short: Multiple extractors on one planet I do quite often, but usually pulling the same resource...

@mattstorm360

2 жыл бұрын

So on some planets you are basically orbital Nestle.

just an update on this the figures currently stand at 52,631 units of p2 for each lauch pad and then the transfer into the storage is 50/50 which works out to 31,578 units for each material. This is because the storage holds 12,000m3 and the lauchpads only holds 10,000m3. You will need some left over to top up the launch pads back to full so in total bring 84,209 exactly

Drop the collecting launch pad, add storage and feed the product back to landing pads. With a that and less links you can prob have extra factory or two.

10 subs and 2000 views??? dang you must be doing great!!!

The first time i did this 7 years ago, my finger tips were hurting and numb after a few months of constantly clicking.. now i have stage one Arthritis in my thumb and index finger. Don't get him started about having to double click to update your lines either LoL. When its all built you can update your lines for better through put and each line goes to 10.

So I've used your video here to make a production planet. It works well, but I was wondering if it's possible to do two T2 products on one factory planet?

excellent

Do you ever have to purchase PI material to run your factory? I know that you mentioned that you have extractor planets, but I can't seem to get enough basic industry factories to meet the needs of the advanced factories like you have. I seem to only be able to fuel 12 advanced factories.

would be nice if they had a "route all X to X" option

Should this work if you substitute the storage for an launchpad? I tried, but it's pulling from the secondary LP before the main LPs are emtpy.

@drdave4557

4 жыл бұрын

It "mostly" works in the order you create the routes. But I have noticed some planets don't care and seem to randomly pull from wherever they feel like...

Awesome Help!!! Any chance you can provide a P2 - P3 & P3 - P4 setup guide?

can I use the same system to make robotics ?

Hey buddy , have you thought of doing a P2 to P3 video ? thanks for this one it helped a lot.

do you make the water and electrolites on the extraction planet??

@claypriddy9423

3 жыл бұрын

Yeah, P0 -> P1 is made on the extraction planet. Look up how to do the extraction planets.

@drdave4557

3 жыл бұрын

My extractor planets (for the most part) pull only one resource, like water, or electrolytes, but not both, sometimes I put two launch pads in two different spots on a planet and extract water -for example- from just the nice red/white spots. Also, on small planets, you can just run long links to another extractor. In Short: Multiple extractors on one planet I do quite often, but usually pulling the same resource...

Thanks for the guide. Why do you sound like Stephen Hawking?😁✌️

@bennettdavid904

3 жыл бұрын

Because he is!

so. lose storage, and 1 lunch pad. you have to many links. Arange P2 processor in square and link them in strait line. You can put about 24P2 with 2 pads. bigger output

Monetizing your clicks in eve online XD

This is the best P2 factory method for sure. Tried various methods myself but couldn't find a better way of making P2. Note that all of the p.g and cpu is taken when using this method making use of all your building capability.