just an update on this the figures currently stand at 52,631 units of p2 for each lauch pad and then the transfer into the storage is 50/50 which works out to 31,578 units for each material. This is because the storage holds 12,000m3 and the lauchpads only holds 10,000m3. You will need some left over to top up the launch pads back to full so in total bring 84,209 exactly
@moonlightdriller Жыл бұрын
roughly, bring 79,500m3 of a tier 1 and another 79,500m3 of a second tier 1 to the customs office. 31,560 of 1 tier one, and 31,560 of the other tier one will go to the storage. then the rest if the first 48,000m3 will go into one launcher and the other 48,000m3 will go to the second launcher. this should fill them all. There was a tiny bit of wasted space, so you can dial that in and reply to correct those numbers. PI ROCKS!
@moonlightdriller Жыл бұрын
I still use this, love it. With the new update PI just reduced its m3 value for materials. so you can fit like double in your hull, in a launchpad, storages etc.
@uglyboy4067 Жыл бұрын
would be nice if they had a "route all X to X" option
@mrmudcatslim10042 жыл бұрын
Thanks man. Much needed.
@diamond48292 жыл бұрын
excellent
@diamond48292 жыл бұрын
?
@thepleasureroom96462 жыл бұрын
can I use the same system to make robotics ?
@damianbramstedt17502 жыл бұрын
Hey buddy , have you thought of doing a P2 to P3 video ? thanks for this one it helped a lot.
@Shrooblord2 жыл бұрын
Amount of clicks: == PLACING FACTORY == - 1 click to select building type; 3 building types: 3 clicks" - 18 factories - 3 launchpads - 1 storage --> 22 clicks in total for placing buildings - Create links between buildings: 1 ctrl-click per link - 5 links between corners; 3 corners --> 15 clicks - 18 diagonal links (clicks) - hit submit (1 click) 59 clicks in total to place down layout == ROUTING INPUTS == - 5 clicks per "input -> create route -> set destination" --> 18 destinations: 18x5 = 90 clicks - 2 input materials: 90x2 = 180 clicks in total for routing inputs - 1 click to change from one Launchpad to the other: first click one, then after all the routings, the next,: 2 clicks - 1 click every time you want to set a new route for one of the factories to select that factory: 18 clicks - 1 click to select Storage -- and then 180 clicks again for the 2 input products x 5 clicks x 18 destinations - hit submit to confirm inputs: 1 click 381 clicks to route inputs == ROUTING OUTPUTS == - click factory, click 'routes', click Coolant, click 'create route', double-click the top launchpad -- 6 links per output routing - 18 factories: 18x6 clicks for routing outputs = 108 clicks - hit submit 109 clicks to route outputs == TOTAL == 549 clicks guaranteed in order to set this up; more if you submit more, make mistakes, etc. ... nice.
@Fear_Not_I_Is_Here Жыл бұрын
I need new mouse after the 499999th click . CCP SRP pls 😅😂
@vukisakovich61212 жыл бұрын
so. lose storage, and 1 lunch pad. you have to many links. Arange P2 processor in square and link them in strait line. You can put about 24P2 with 2 pads. bigger output
@Hayes9553 жыл бұрын
So I've used your video here to make a production planet. It works well, but I was wondering if it's possible to do two T2 products on one factory planet?
@nobodyimportant86953 жыл бұрын
The first time i did this 7 years ago, my finger tips were hurting and numb after a few months of constantly clicking.. now i have stage one Arthritis in my thumb and index finger. Don't get him started about having to double click to update your lines either LoL. When its all built you can update your lines for better through put and each line goes to 10.
@davesskillet92353 жыл бұрын
I went as far as I could and had to train more to build more lol so back to the classroom. Thanks for sharing PI
@keithmills22873 жыл бұрын
Awesome Help!!! Any chance you can provide a P2 - P3 & P3 - P4 setup guide?
@loldotsarefun3 жыл бұрын
Do you ever have to purchase PI material to run your factory? I know that you mentioned that you have extractor planets, but I can't seem to get enough basic industry factories to meet the needs of the advanced factories like you have. I seem to only be able to fuel 12 advanced factories.
@drdave45573 жыл бұрын
My extractor planets (for the most part) pull only one resource, like water, or electrolytes, but not both, sometimes I put two launch pads in two different spots on a planet and extract water for example from just the nice red/white spots. Also, on small planets, you can just run long links to another extractor. In Short: Multiple extractors on one planet I do quite often, but usually pulling the same resource...
@mattstorm3602 жыл бұрын
So on some planets you are basically orbital Nestle.
@DS-cp3fg3 жыл бұрын
This is the best P2 factory method for sure. Tried various methods myself but couldn't find a better way of making P2. Note that all of the p.g and cpu is taken when using this method making use of all your building capability.
@DS-cp3fg3 жыл бұрын
This is the best P2 factory method for sure. Tried various methods myself but couldn't find a better way of making P2. Note that all of the p.g and cpu is taken when using this method making use of all your building capability.
@ciprianbaciu7613 жыл бұрын
Very good and useful information. Thanks a lot foe sharing this!
@IanVaughanMe4 жыл бұрын
"Isnt this fun? Its not even the best part yet" crazy! lol
@soulmask27814 жыл бұрын
Monetizing your clicks in eve online XD
@zereimu4 жыл бұрын
Awesome! Could you make a video for your extraction planets? So far this is the most helpful Pi video I've seen.
@arkthecat92124 жыл бұрын
10 subs and 2000 views??? dang you must be doing great!!!
@marfiuss4 жыл бұрын
do you make the water and electrolites on the extraction planet??
@claypriddy94234 жыл бұрын
Yeah, P0 -> P1 is made on the extraction planet. Look up how to do the extraction planets.
@drdave45573 жыл бұрын
My extractor planets (for the most part) pull only one resource, like water, or electrolytes, but not both, sometimes I put two launch pads in two different spots on a planet and extract water -for example- from just the nice red/white spots. Also, on small planets, you can just run long links to another extractor. In Short: Multiple extractors on one planet I do quite often, but usually pulling the same resource...
@stephenscriven62554 жыл бұрын
Drop the collecting launch pad, add storage and feed the product back to landing pads. With a that and less links you can prob have extra factory or two.
@celebritywho4 жыл бұрын
Great job, thanks.
@pleangaming10544 жыл бұрын
Thanks for the guide. Why do you sound like Stephen Hawking?😁✌️
@bennettdavid9043 жыл бұрын
Because he is!
@jasongray42704 жыл бұрын
Should this work if you substitute the storage for an launchpad? I tried, but it's pulling from the secondary LP before the main LPs are emtpy.
@drdave45574 жыл бұрын
It "mostly" works in the order you create the routes. But I have noticed some planets don't care and seem to randomly pull from wherever they feel like...
@ashg90234 жыл бұрын
Theres a lot of double links which you don't necessarily need. You can save fitting if you use less. I like to spiral my links when I have a large array.
@MrLynkz844 жыл бұрын
Hey, great video thank you so much. I would suggest getting a mouse that will allow you to bind double click to one button. It makes this process SO much easier.
@KHIMAIRA21104 жыл бұрын
Thanks for sharing, im currently running three of these factory planets now <3
Пікірлер
just an update on this the figures currently stand at 52,631 units of p2 for each lauch pad and then the transfer into the storage is 50/50 which works out to 31,578 units for each material. This is because the storage holds 12,000m3 and the lauchpads only holds 10,000m3. You will need some left over to top up the launch pads back to full so in total bring 84,209 exactly
roughly, bring 79,500m3 of a tier 1 and another 79,500m3 of a second tier 1 to the customs office. 31,560 of 1 tier one, and 31,560 of the other tier one will go to the storage. then the rest if the first 48,000m3 will go into one launcher and the other 48,000m3 will go to the second launcher. this should fill them all. There was a tiny bit of wasted space, so you can dial that in and reply to correct those numbers. PI ROCKS!
I still use this, love it. With the new update PI just reduced its m3 value for materials. so you can fit like double in your hull, in a launchpad, storages etc.
would be nice if they had a "route all X to X" option
Thanks man. Much needed.
excellent
?
can I use the same system to make robotics ?
Hey buddy , have you thought of doing a P2 to P3 video ? thanks for this one it helped a lot.
Amount of clicks: == PLACING FACTORY == - 1 click to select building type; 3 building types: 3 clicks" - 18 factories - 3 launchpads - 1 storage --> 22 clicks in total for placing buildings - Create links between buildings: 1 ctrl-click per link - 5 links between corners; 3 corners --> 15 clicks - 18 diagonal links (clicks) - hit submit (1 click) 59 clicks in total to place down layout == ROUTING INPUTS == - 5 clicks per "input -> create route -> set destination" --> 18 destinations: 18x5 = 90 clicks - 2 input materials: 90x2 = 180 clicks in total for routing inputs - 1 click to change from one Launchpad to the other: first click one, then after all the routings, the next,: 2 clicks - 1 click every time you want to set a new route for one of the factories to select that factory: 18 clicks - 1 click to select Storage -- and then 180 clicks again for the 2 input products x 5 clicks x 18 destinations - hit submit to confirm inputs: 1 click 381 clicks to route inputs == ROUTING OUTPUTS == - click factory, click 'routes', click Coolant, click 'create route', double-click the top launchpad -- 6 links per output routing - 18 factories: 18x6 clicks for routing outputs = 108 clicks - hit submit 109 clicks to route outputs == TOTAL == 549 clicks guaranteed in order to set this up; more if you submit more, make mistakes, etc. ... nice.
I need new mouse after the 499999th click . CCP SRP pls 😅😂
so. lose storage, and 1 lunch pad. you have to many links. Arange P2 processor in square and link them in strait line. You can put about 24P2 with 2 pads. bigger output
So I've used your video here to make a production planet. It works well, but I was wondering if it's possible to do two T2 products on one factory planet?
The first time i did this 7 years ago, my finger tips were hurting and numb after a few months of constantly clicking.. now i have stage one Arthritis in my thumb and index finger. Don't get him started about having to double click to update your lines either LoL. When its all built you can update your lines for better through put and each line goes to 10.
I went as far as I could and had to train more to build more lol so back to the classroom. Thanks for sharing PI
Awesome Help!!! Any chance you can provide a P2 - P3 & P3 - P4 setup guide?
Do you ever have to purchase PI material to run your factory? I know that you mentioned that you have extractor planets, but I can't seem to get enough basic industry factories to meet the needs of the advanced factories like you have. I seem to only be able to fuel 12 advanced factories.
My extractor planets (for the most part) pull only one resource, like water, or electrolytes, but not both, sometimes I put two launch pads in two different spots on a planet and extract water for example from just the nice red/white spots. Also, on small planets, you can just run long links to another extractor. In Short: Multiple extractors on one planet I do quite often, but usually pulling the same resource...
So on some planets you are basically orbital Nestle.
This is the best P2 factory method for sure. Tried various methods myself but couldn't find a better way of making P2. Note that all of the p.g and cpu is taken when using this method making use of all your building capability.
This is the best P2 factory method for sure. Tried various methods myself but couldn't find a better way of making P2. Note that all of the p.g and cpu is taken when using this method making use of all your building capability.
Very good and useful information. Thanks a lot foe sharing this!
"Isnt this fun? Its not even the best part yet" crazy! lol
Monetizing your clicks in eve online XD
Awesome! Could you make a video for your extraction planets? So far this is the most helpful Pi video I've seen.
10 subs and 2000 views??? dang you must be doing great!!!
do you make the water and electrolites on the extraction planet??
Yeah, P0 -> P1 is made on the extraction planet. Look up how to do the extraction planets.
My extractor planets (for the most part) pull only one resource, like water, or electrolytes, but not both, sometimes I put two launch pads in two different spots on a planet and extract water -for example- from just the nice red/white spots. Also, on small planets, you can just run long links to another extractor. In Short: Multiple extractors on one planet I do quite often, but usually pulling the same resource...
Drop the collecting launch pad, add storage and feed the product back to landing pads. With a that and less links you can prob have extra factory or two.
Great job, thanks.
Thanks for the guide. Why do you sound like Stephen Hawking?😁✌️
Because he is!
Should this work if you substitute the storage for an launchpad? I tried, but it's pulling from the secondary LP before the main LPs are emtpy.
It "mostly" works in the order you create the routes. But I have noticed some planets don't care and seem to randomly pull from wherever they feel like...
Theres a lot of double links which you don't necessarily need. You can save fitting if you use less. I like to spiral my links when I have a large array.
Hey, great video thank you so much. I would suggest getting a mouse that will allow you to bind double click to one button. It makes this process SO much easier.
Thanks for sharing, im currently running three of these factory planets now <3
Don't drop your phone in the water:p