Engraving TIPS and TRICKS | How to ENGRAVE Stainless Steel TUMBLER
Engraved Tumbler with Tungsten Carbide Burr + Tips and Tricks
Hello everyone, welcome to my channel “Triado Custom Engraving”. In this video I will engrave a 20oz YETI Tumbler with a Tungsten Carbide Burr. I will also go over some tips and trick when it comes to making straight lines. As always, I appreciate everyone’s support!
▶️ Check out this video for my full engraving process:👇🏻
How to Engrave Stainless Steel Water Bottles: Using ANY Rotary Tool • How to ENGRAVE Stainle...
Contact me here 👉🏻 lnk.bio/triado_custom_engraving
🛠️ Tools and Equipment that I use:
ROTARY TOOLS AND ACCESSORIES
- Foredom K1060 Micromotor - amzn.to/3prMzfH
- Dremel 4000 - amzn.to/3vByVYt
- Dremel 3000 - amzn.to/3GemIha
- Dremel Stylo - amzn.to/3b4D5Pe
- Dremel Engraver - amzn.to/3B6Ul0D
- Dremel Flex Shaft - amzn.to/3Gep1AW
- Engraving Accessory Kit - amzn.to/3prQx85
DREMEL MOTOR BRUSHES
- Dremel 4000 Motor Brushes - amzn.to/3C9JhkT
- Dremel 3000 Motor Brushes - amzn.to/3B8GKpH
BURS AND BITS
- Fox Germany TC Bur Set - ebay.us/DvaWdP
- Dremel 463 Rubber bit - amzn.to/3E893WZ
- Dremel 9905 TC Bur - amzn.to/3Bfs3Bm
- Dremel 932 Grinding bit - amzn.to/3jxNQ13
BUR LUBRICANTS
- PRO-CUT Bur Lubricant - amzn.to/3E97JTN
- Eurotool Cut Lube - amzn.to/3jw7VEW
TRANSFER PAPER AND CONSUMABLES
- Black Carbon Transfer Paper - amzn.to/3jw8fUa
VIDEO AND LIGHTING EQUIPMENT
- Aputure MC RGB Mini Video Light - amzn.to/2XJvuT6
- Raleno LED Soft Light Panel - amzn.to/3juoPDT
- Godox QR-P90 Parabolic Softbox - amzn.to/3B84kmy
- Godox SL-60W - amzn.to/3nsTWRA
- Panasonic Mirrorless Camera - amzn.to/3B5UqSd
- Lavalier Microphone System - amzn.to/3m3jXHr
SAFETY EQUIPMENT
- Dust Half Mask Respirator - amzn.to/3b9oTEg
- Hearing Protector Headset - amzn.to/3GesKhU
- Safety Glasses - amzn.to/3m6lRHd
- Gorilla Grip Gloves - amzn.to/3GdFtkX
💻 PROGRAMS USED:
- Procreate
- Adobe Illustrator
- LumaFusion
🎵 MUSIC CREDIT:
- Take Me Down To The Fashion Show - NoMBe
- Average - Patrick Patrikios
#TriadoCustomEngraving #Engraving #DIY
*I'm a participant in the eBay Partner Network and Amazon Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to eBay.com and Amazon.com affiliated sites at no extra cost to you. *
Пікірлер: 62
Thank you guys for watching. Are you new to rotary tool engraving, if so what questions do you have and what would you like to learn?
@alanparadis5061
Жыл бұрын
Im using a small Dremel 2050 with fair results, I'm able to upgrade but not sure what to get... do u recommend the Dremel 4000? What are you using? I hear you say in the video but I can't make out the name exactly... thanks for the vids and keep up the great work!
@TriadoMax
Жыл бұрын
@@alanparadis5061 Hey Alan, Merry Christmas! I own two Dremels, 3000 and 4000. I started out with 3000 and it did great. I upgraded to 4000 because it has a bigger motor. If you want to upgrade I’d go with 4000 with the Dremel flex shaft attachment and a multi chuck for easy bur swaps.
Another amazing video!!! Love the tip about moving the cup around that way you wont rub off the carbon transfer.
@TriadoCustomEngraving
3 жыл бұрын
Thank you brother! I definitely needed to follow my own tip because I erased some of my tracing but that’s how I came up with it in the first palace haha
So so cool dude, amazing work
@TriadoCustomEngraving
Жыл бұрын
Thank you very much Andrew!
Максим,ты молодец !!!
@TriadoCustomEngraving
3 жыл бұрын
Спасибо тетя Ира!
It's nice something new and the lines were crisp I love the art work you used.
@TriadoCustomEngraving
3 жыл бұрын
Thank you Melissa! 😃
Great job 👏🏻
@TriadoCustomEngraving
3 жыл бұрын
Thank you Mom! 😃
That was a brilliant video to watch! Really enjoyed the tutorial on straight lines!! 🤩🤩🤩😎
@TriadoCustomEngraving
3 жыл бұрын
Haha I’m glad that you liked the video! I always get asked about how I do straight lines so I figured I’d put that in this video.
Thank you for sharing! Very clear explanation. Great job!
@TriadoCustomEngraving
3 жыл бұрын
You’re very welcome! Thank you for watching 😃
Nice job! Looking forward to doing my own mug
@TriadoCustomEngraving
3 жыл бұрын
Thank you Ashtizzle!
Great video and tumbler!
@TriadoCustomEngraving
3 жыл бұрын
Thank you buddy!
Beautiful work, amazing detail.
@CorneliusCreations
3 жыл бұрын
He is awesome!
@TriadoCustomEngraving
3 жыл бұрын
Thank you Chris!
@TriadoCustomEngraving
3 жыл бұрын
Thank you Matt!
Brother, another masterpiece..great job 💪💯✅👏👌💥💢
@TriadoCustomEngraving
3 жыл бұрын
I appreciate it and thank you for watching! 🤜🏻🤛🏻
Looks brilliant my friend and such clean lines. Surprised to see the amount of dust that came off the cup in the background 😉
@TriadoCustomEngraving
3 жыл бұрын
Haha thank you! All that dust from just a few minutes, I kept vacuuming it every so often lol
Very cool!! Nice job and an inspiration to try again, ive done 3 cups so far, thak you for sharing your skills!
@TriadoCustomEngraving
Жыл бұрын
Hey, thanks Alan!
You made a great job of the beaker. I prefer the directional filling in, not the scribble method that lot's of people do! Very professional CONGRATULATIONS 👍😷👍
@TriadoCustomEngraving
3 жыл бұрын
Thank you very much, happy holidays!
@PENFOLD1962
3 жыл бұрын
@@TriadoCustomEngraving Merry Christmas and a very Healthy New Year to you and your family 👍😷👍
@TriadoCustomEngraving
3 жыл бұрын
Merry Christmas and a happy new year to you as well!
When you wipe away the excess dust do you have the proplem of wiping away the carbon paper outline too?
@TriadoCustomEngraving
2 жыл бұрын
Hey Meigan, good question. I usually use a bristle brush to get the dust off, this way it doesn’t get erased. Might want to wear some kind of dust mask since you’re lifting it up in the air.
Cuanto cuesta un vaso así grabado? Te quedan excelentes saludos
@TriadoCustomEngraving
Жыл бұрын
Thank you!
Extraordinariiiiooooo absolutly fantasssssticoooooo mate thank you very much for sharing your knowledge and technicks in engraving with all of us man I am already suscribed to your channel for keeping learning lots from you mate thanks a lot cheers from down under uruguay south america ta ta 😂😂😂😀😀😁😁😆😆😉😉😉😍😍😍🤩🤩🤩😘😘😘😮😮😮😲😲😲👌👌👌👍👎👍👏👏👏👋👋👋👋🙌🙌🙌
@TriadoCustomEngraving
Жыл бұрын
Haha thanks Rick! You made my day 😃
What type of carbon did you use for tracing your pattern,? Thank you and very nice your work
@TriadoCustomEngraving
3 жыл бұрын
Hey Tina, I bought carbon paper on Amazon about two years ago so I don’t remember exactly but any carbon paper will work. Mine came in sheets of 100 I believe.
Have you ever thought of adding a stainless steel dye to any of these? Looks great man Keep it up? Just saying paint it.
@TriadoCustomEngraving
3 жыл бұрын
Bro you read my mind. I was just talking to my dad about it. Is it possible? I’ve never used anything like that before.
What round burr size do you use?
@TriadoCustomEngraving
2 жыл бұрын
017-021
В конце гравировки присутствует ли какая-то обработка поверхности? Потому что у меня после гравировки микрофибровая салфетка сильно цепляется за края. То есть за какую-то нежную ткань может зацепиться и наделать затяжекю
@TriadoCustomEngraving
3 ай бұрын
Здравствуйте Александр, вы можете использовать полировальным кругом или резиновую полировальную насадку. Я думаю, что вам также необходимо сменить используемый вами бор, чтобы срез был более гладким. Я использую круглые боры Fox Germany из карбида вольфрама, и они отлично работают. Надеюсь это поможет!
@alexondr762
3 ай бұрын
@@TriadoCustomEngraving бор тоже из карбида вольфрама, круглый, но дремелевский. Ну и практики маловато, может потом, когда руку набью, будет получше. А резиновые насадки какие можете посоветовать?
@TriadoCustomEngraving
3 ай бұрын
@@alexondr762 Да, со временем у вас обязательно это получится. Я рекомендую резиновые насадки Dremel 463 или 462, но вы всегда можете купить в Интернете более дешевые подделки. Просто поищите на Amazon насадки для полировки резины, и вы найдете множество их видов. Вам не нужно ничего слишком абразивного.
@alexondr762
3 ай бұрын
@@TriadoCustomEngraving большое спасибо, посмотрю:) Удачи!✌️
@TriadoCustomEngraving
3 ай бұрын
@@alexondr762Спасибо и тебе тоже!
Do you use turbo engraving? Good joo my hobby ia engraving
@TriadoCustomEngraving
3 жыл бұрын
Hello, thank you very much! I don’t have a turbo engraver. I currently only use Dremel with a Flexshaft as well as Foredom micromotor which is a brushless motor system.
I found where to buy the burs, but what size did you use? Thanks
@rogervioletjr1693
3 жыл бұрын
I just re-watched your other video, found it there!
@TriadoCustomEngraving
3 жыл бұрын
Nice! Yeah I got the kit on eBay it came with several different sizes. I believe 025 and 019 is what I used, they are not labeled.
If washed alot does the paint chip off?
@TriadoCustomEngraving
Жыл бұрын
It’s comparable to laser engraving so no not really.
@isaiahbaca1062
Жыл бұрын
@@TriadoCustomEngraving thanks and great art you create .
@TriadoCustomEngraving
Жыл бұрын
@@isaiahbaca1062 I appreciate it and thank you for watching the video!