i've not flown for a few years, watching this build was just a pleasure... lovely model

Nice model! I especially like that you made it attainable to those of us that aren't set up to do carbon fiber work. Thanks!

What a fantastic shop! Looks like the little plane flies great. Great job.

Excellent design, craftsmanship and performance. I’m jelly of your tools. Thanks for the video!

I love watching a real craftsman working !

Great looking model, but that sound…… nah couldn’t live with that 😂

The amount of planes, that are coming out from your workshop is incredible ✈👍

@s_cycle1921

11 ай бұрын

yes its almost like a new plane every week. marvellous productivity. I really enjoy all these production methods.

Thank you, I will remember the wonderful way that you used a Planer.

Beautiful work as always!

Beautiful ! Really like the color black and green mamba ! Perfect match ! Well done my friend ! 💙 👍

@markoroolaid

11 ай бұрын

thanks

@aleksandarmilinovic

11 ай бұрын

​@@markoroolaidbrate dolazim iz srbije i zanima me ovaj avion za koliko bih para napravio meni takav

Amazingly professional work, congratulation & respect!

You have a well stocked work shop!!! Beautiful model too 👍

@markoroolaid

11 ай бұрын

thank you

Work of art.

Oh my GOD! She’s bloody beautiful mate! 😃😎🤝

@markoroolaid

11 ай бұрын

thank you so much

parabéns...belo projeto...lindo voo!!!!!

super! thx for the showcase

It would have been nice to see you actually glide it around I was wondering how good it glides.

bloody Amazing very skilled man thank you

@markoroolaid

11 ай бұрын

thanks

The assembly is very interesting, but the craving is very small. And I also want such a FUTABA

Wow that was great vid. Thank you

Little education on using "super glue". 1. Accelerator weakens the joint. Ever look at a joint that's been accelerated? It's full of void spots. I suggest not using it. Patience is the key. 2. Use the proper grade of super glue for the job. There are three types. Thin, medium and thick. Thin is for tight joints as it will wick deep into the joint. Medium is for loose joints as it will fill minor gaps. Thick is for open faces, fillets and mixing with micro balloons to fill cracks. I should do a video on how to properly use "super glue".

@markoroolaid

10 ай бұрын

Thank you

There are hobbyists, and then there are artists.

Am currently travelling the world. Currently in Finland. Next stop Estonia. Any chance I could visit your workshop while I am there?

Wow wow wow!!!

Absolutely amazing, as always. =^/,..,^= I love the craftsmanship you put into these aircraft.

very, very impressive.

Amazing plane, where I can find the carbon tapered tube, if possible the links. Thanks for your amazing designs, from Argentina

Should offer this as a RTF....

@danielhelsby1221

11 ай бұрын

How much to make one

Superb !!!

У тебя Марко что ни модель,то шедевр! Не понял Марко, как ты задал профиль на крыльях не пребегая к контр шаблонам ?!

Very cool 😊❤

I am really excited to know. how did you print that stickers? kindly your special video on it would be appreciate....

Wow how did you configured V-tale to work in-sync with ailerons? and also why dont you use some ELRS EPW5 ? it would be much smaller and lighter receiver

Hello Marco, I came across your channel and I'm really impressed with what you do, well done 🙂 However, I have a few questions about the build of this motorglider. What nozzle size do you use for printing? What is the temperature of the tray, of the nozzle? What is the print speed? Concerning the carbon tube for the body of the motorglider, on which site did you buy it? Thank you so much Best regards

Very cool!

@markoroolaid

11 ай бұрын

thank you

Hola .me gustaria acer la parte en 3 d de fucelage..pero no encuentro .para hacerlo en maquina 3d. De chile felicitaciones muy lindo trabajo

Hi there Marko, What a great build. Thank you for sharing. Am I missing something or is the internal nose structure file missing from the GrabCad link? Kind Regards, Andrew

@markoroolaid

11 ай бұрын

hi, now ok, i had forgotten

@Taxicabs13

11 ай бұрын

@@markoroolaid You are a superstar. Love all your work. Thank you.

Put a QX-Motor 30mm edf 3s or 4s (different models) and you will probably get more thrust for less current consumption. The old style rebranded AEO-RC ones are not very efficient. You can also try the new style AEO-RC 40mm or XFLY-MODEL 40mm. The design is awesome, it just would be amazing with more power.

@markoroolaid

11 ай бұрын

To be honest, I was disappointed with my own edf motor, I believed it could fly faster. Thank you for the suggestion. Of course, if I put a bigger engine and battery, I have to change the design a bit

@ignasanchezl

11 ай бұрын

Thanks for replying. This is a very inspiring build.

@ignasanchezl

11 ай бұрын

If you're considering going even larger with the EDF, I have a few 50 or even 70mm high thrust suggestions, but most EDFs on 70+size will provide plenty of power. Most designs go for a larger diameter possible because larger with less is often more efficient and cheaper, yet well balanced high thrust small EDFs seem to be disappearing from the market.

Beautiful aircraft. pls balance that edf tho.

This looks like so much fun, you are a rockstar!!

Отличный самолёт Бро

@markoroolaid

11 ай бұрын

большое спасибо

Could you advise what the angle of thrust is on your motor? I have been unable to find that information. Thank you. Again, great job!

@markoroolaid

11 ай бұрын

the motor angle is the same as the wing.

👍

nice design , amazing 3d printed parts and build but not really a "Glider" more a sport aerobatic power plane !

Looks nice, but what is it for?

Hi. Tell me what program you use for designing. Rhino or fusion? Your work pleases the eyes!

@markoroolaid

11 ай бұрын

I use solid edge

GOOD

Loudest glider I've ever seen. 🤣

The data say it´s 4 times as heavy as it´s thrust. I´m surprised, today it seemes underpowered. Does it ?

Beautiful build, what are you using for the hinges

@markoroolaid

11 ай бұрын

Hi, link here www.lindinger.at/en/AIRPLANES/AIRCRAFT-ACCESSORIES/Hinges/DUBRO-Micro-E-Z-Hinges-Scharniere-15-Stueck-1-28x-7-14mm-0-18g-Stk./9787315 But if you can find smaller ones, I recommend them

@pablofpv

11 ай бұрын

@@markoroolaid Thanks for the reply :)

Beautifully built, Marko! How much does this weigh?

@markoroolaid

11 ай бұрын

hi, 413g

@srartf

11 ай бұрын

@@markoroolaid Thanks for your reply! I wanted to know that because I want to build an rc plane under 250g to avoid the complications of the local law... I might try to scale down your build using lightweight PLA to see how much weight I can cut... Please keep up your great work!

Is this a tapered(!) carbon fuselage tube? Like a carbon XC ski pole?

@markoroolaid

21 күн бұрын

Tapered yees

Hello, The Model is really great. Were can I find the balsa part plans ?

@markoroolaid

11 ай бұрын

Hi, look EDF GLIDER 2D.dxf file

@DamienHirlimann

11 ай бұрын

@@markoroolaid thank you. Sorry Should have checked that file

What kind of hinges are you using?

@markoroolaid

11 ай бұрын

Hi, link here www.lindinger.at/en/AIRPLANES/AIRCRAFT-ACCESSORIES/Hinges/DUBRO-Micro-E-Z-Hinges-Scharniere-15-Stueck-1-28x-7-14mm-0-18g-Stk./9787315 But if you can find smaller ones, I recommend them

What material do you use to build the V tail base? Thank you.

@markoroolaid

11 ай бұрын

hi, Bambu Lab nylon carbon filament

@CESARBREMERPINHEIRO

11 ай бұрын

​@@markoroolaid Thank You.

An artist is never truly done, can you get the plane sound down? Love your build.

А регулятор обдувается?

Any chance you could make a version with a propeller and without a motor?

@markoroolaid

11 ай бұрын

No :)

I'm about to start this one as soon as I finish your F-16. Can you give me the carbon rod dimensions. Thanks Marko

@markoroolaid

10 ай бұрын

Wow, super nice. Carbon fibre tube -TAPERED- 3k-PW (18.3 x 8 x 0.3) x 1100 mm www.r-g.de/en/art/77100503

@ronniecochran8366

10 ай бұрын

@@markoroolaid I'll send you some pics. Thanks again Marko

@markoroolaid

10 ай бұрын

@@ronniecochran8366 Join my FB group RC WORLD OF MODEL. It's good to share pictures there

@ronniecochran8366

10 ай бұрын

@@markoroolaid I sent you a picture of the edf pod for my glider on your Instagram

amigo una pregunta, que clase de madera utilizas y de que grosor?

@markoroolaid

10 ай бұрын

Ver dibujo DXF grabcad.com/marko.roolaid-1/models

How long flight time?

@markoroolaid

11 ай бұрын

5-6 min

what make is the mini battery screwdriver please

@markoroolaid

11 ай бұрын

hi. link here www.miniware.com.cn/product/es15-motion-control-electric-screwdriver/

Hello I have been trying to sign up to Grabcad and download the files but I keep getting errors from recapcha not loading to no response. Is there any other way to get the files?

@markoroolaid

11 ай бұрын

Not now

I'm curious why you did monokote instead of paint.

@markoroolaid

11 ай бұрын

I hadn't thought of that, good point

Does it come with earplugs ???

@markoroolaid

11 ай бұрын

;)

What is the estimated lfight time ?

@markoroolaid

11 ай бұрын

5-7 min

Uus printer müttab kenasti!

@markoroolaid

11 ай бұрын

pole viga

You could sell those different colors

Is it just me or does that plane sound like a Mosquito when you try and sleep.

Wooowww😮👍🏻

Someone tell me what EDF means! I've been living in a ditch for 20 years!

@markoroolaid

11 ай бұрын

Electric Ducted Fan

Under $3k of machinery and he's making production grade planes with little effort.

@jhiggason1

11 ай бұрын

He has more than 3k of machinery, the 3d printer is half of that, how much do you suppose a full size cnc machine and a full size vinyl cutter is? I'm guessing more than 1.5k.....

@Arek_R.

11 ай бұрын

@@jhiggason1 Printer 1.5k, CO2 laser 400-600, and vinyl cutter 300-600

@jhiggason1

11 ай бұрын

@@Arek_R. I must be shopping at the wrong places to find a co2 laser for 400 dollars. A longer ray10 cost that much and is a cheap 10watt laser cutter. What co2 laser in that size is 400 dollars?

Something Is Not Ok! To Weak And Slow For That Noise!! I Think The Impeller Is Not Ok! Raise The Blades For A Few Degrees....

@markoroolaid

11 ай бұрын

You are absolutely right, I took the impeller apart and the blades were out of balance, very badly. A bit of sanding and the edf now runs much quieter

@manfredmathis3667

11 ай бұрын

👍👍👍

Fooled me.

For a glider the motors are spinning a lot!

noise horrible

Летать не умеешь фигней маешься

@user-oo1pu6bj1c

11 ай бұрын

Я вообще 3 года летаю на 1 планере еще 2 в запасе