As an engineer in the field of epoxy composites I must stress, that it is highly advisable to use proper protection gloves, when you handle epoxy. I have seen far too many colleagues with high allergic response to epoxy from earlier skin contact to this substance. Thin nitrile gloves are not removing your excellent handyman skills ;-)

@Jack-ne8vm

2 жыл бұрын

Ditto face mask or vacuum while grinding

@index7787

2 жыл бұрын

@@Jack-ne8vm always, carbon dust is horrifying to the body.

@computertecky4744

2 жыл бұрын

@@index7787 yep

@CoernelSkateboarding

2 жыл бұрын

Some time is better to work without gloves but use tool and don't get contact with the epoxid! Epoxid under gloves are so wors! Work clean und Fresh air on the hand/skin is much better. I bought myself a 3M Helmet with extern blower. It's amazing! I've got allergy against different dust. 😑

@manuelvaliente9427

2 жыл бұрын

Hace experienced this on my own skin but still sometimes forget putting them just for the thrill of touching everything 😃😅😅😅

The food saver method! Love it, I just started bagging. I use the clothing bags and a shop vac. So far so good 👌🏼

8:30 beautiful moment ❤️ love this aircraft .

This is such a clean layup, learned a lot from your method/design on the wings.

@markoroolaid

2 жыл бұрын

thanks

@user-oo1pu6bj1c

Жыл бұрын

@@markoroolaid кстати именно из за этих планеров в f5j перешли на тонкие крылья. Кстати просто и гениально сделал Молодец

I have not flown since my college days in the 80s. Your video makes me want to get back into it. I still have my old gear and Aquila glider but a drunk driver put an end to any further flying trips. The area sure looks like the sod farms south of Huffman Texas.

@markoroolaid

2 жыл бұрын

Hi Mongo I'm glad I can inspire people to build and fly RC planes. That's my main idea, why am I making these videos.

Great build looks awesome😀

That is craftsmanship at its finest .. Beautiful job !

@markoroolaid

2 жыл бұрын

thank you, thank you very much

Ok, I'm buying a food preserver. I wanted to give one of those hand held ones a try. Mind you I was only fiberglassing balsa tail planes but, even in the bag with just pressure turned out nicely. Awesome video!

@markoroolaid

Жыл бұрын

Hello. Thank you and great to hear that everything worked

Very impressed. Wish i had skills and tools like that

Beautiful build 🚀

What a piece of art. Beautiful.

@markoroolaid

2 жыл бұрын

thank you

My old neighbor builds and flies these (minus the motor), I've seen him fly one for an hour and a half straight off a single throw once, he competes regularly with them. The craftsmanship of these hand tossed glider planes is on another level, I'm routinely amazed by how perfect and smooth the carbon wings end up. I've always been into flying freestyle drones and would like to get into some wings, though I'll be leaving the gliders alone for a while lol.

@user-oo1pu6bj1c

Жыл бұрын

Карбон менее гладкий чем скотч Вы шероховатость материалов посмотрите

I am always impressed with your projects. I love building planes so you encourage me to be more professional in this field and update myself with modern tools like yours. I hope your channel grows more and more and rewards all the good work you enjoy and kindly share with us.

@markoroolaid

Жыл бұрын

Thank you very much for these beautiful wishes and words. I myself hope too that my channel will grow and that one day I will be able to dedicate myself 100% to the RC field and KZread

@romeorc5301

Жыл бұрын

@@markoroolaid how mach $

@markoroolaid

Жыл бұрын

@@romeorc5301 I don't know exactly, but around 200.-eur

@user-oo1pu6bj1c

Жыл бұрын

@@markoroolaid чо с ума сошел первую партию за 300 продавай Если планера окажутся хорошими можно и до 400 поднимать.

Congratulations magnificent glider

@markoroolaid

2 жыл бұрын

thank you

Great work!

@markoroolaid

Жыл бұрын

Thank you

Absolutely amazing! I'm about to build a 1 meter dlg. I wish I had a 3d printer, this video gave me so many ideas 😎

@markoroolaid

6 ай бұрын

Ok, thank you very much

very nice footage keep the good work👋👌

@markoroolaid

Жыл бұрын

Thank you very much

Very nice work man! 👍

@markoroolaid

Жыл бұрын

thanks

Much impressed, great work! FYI, the music detracts from the video.

Beautiful fabrication. It appears you have installed the horizontal stabilizer upside down (that is to say, camber curvature on top). Looks like great fun to fly.

@markoroolaid

Жыл бұрын

Thank you

Coool... verry nice...👍🏻👍🏻👍🏻👍🏻

@markoroolaid

Жыл бұрын

Thank you, thank you very much

hi,Congrats for your job and for shairing your design / built. May I have the settings for 3d print the parts ? For example : how many perimeters for fuselage 1-2-3 ? and infill density for fuselagerame ...etc

Amazing! Beautiful. I'm curious about building sub-250g models (so I don't have to run the new Remote ID), and it looks like this one is really close! If I didn't need the camera, I could shed about 70g? Maybe scale it down a little?

I would love a slow version and explanation during wing covering process It looks so impressive something I’d like to try 😊

@markoroolaid

Жыл бұрын

Definitely give it a try. A very interesting process

@sharons9367

Жыл бұрын

@@markoroolaid I’ve got that carbon fibre on my watch list looks awesome now I’ve seen it applied

Superb !!!

@markoroolaid

2 ай бұрын

Thank you very much

You are the best !

@markoroolaid

2 жыл бұрын

thank you

Wow! Nice! :)

@markoroolaid

2 жыл бұрын

thanks

Great job you are very skilled. You don’t use the throttle stick for flaps? I fly a Vortex and I have the motor on a switch. I have been flying gliders for ever and the flaps are always on the left stick. How many day did it actually take to build it.

@markoroolaid

2 жыл бұрын

The whole project took 1 week

Is that a 3d printed wing joiner? Have you tried that with a DLG launch? I think I would prefer 3d printing a wing alignment jig and using CF/Epoxy to join the wings. Beautiful plane.

@markoroolaid

2 жыл бұрын

yes, 3D printed wing joiner. Printed eSUN CF path filament

How are the control surfaces attached to the wings? is there a flexible layer on the foam that you don't cut?

@carbonarne675

2 жыл бұрын

It's a strip of 45° cevlar

Great video and great build! I don't get the main wing build though... You cnc'd the foam core top side and put it in a milled bottom part? Can you explain how you got the bottom shape of the profile?

@markoroolaid

2 жыл бұрын

The profile is made in such a way that it should only be milled on top. The leading edge is later modified with a pad of sandpaper from below

@LWJCarroll

2 жыл бұрын

Thanks a basic easy building flat bottom airfoil….

Fantastic! can I ask what the contraption you are using for vacuum bagging the tail surfaces is? It looks like some kind of heat sealing vacuum thing? certainly a lot neater than the pump and sealant that I currently use.

@garycaruso4883

2 жыл бұрын

looks like a vacuum food sealer

@markoroolaid

2 жыл бұрын

hi Andy. Vacuum machine for vacuum bag with channels 30cm wide www.pakendikeskus.ee/en/packaging-machines/vacuum-machines/vacuum-machine-for-vacuum-bag-with-channels-30cm-wide

@ralfengels2183

Жыл бұрын

Downside: You can't heat-cure it. If you e.g. cover the whole setup in a heat blanket the remaining air expands and you vacuum is gone. Also they aren't that much cheaper than a vacuum pump.

Great build. To bad you put a motor on it, it would be a great DLG set up.

@markoroolaid

2 жыл бұрын

electric plane more convenient

Hi Marko, congratulations for your channel and the clean work that you do in all your planes. Would it be possible to upload the fusselage part in other format than stl. I would like to make some adjustment but not possible as I am using Fusion360 and the imported STL as mesh creates too much poligons. It would be fantastic and I would apreciate it. Thanks.

@markoroolaid

Жыл бұрын

I added a new file DLG electric fuselage.stp grabcad.com/library/dlg-style-electric-rc-glider-1

@jorgarciahern

Жыл бұрын

@@markoroolaid love

How may hours did this take? Looks AWESOME!! And how do you keep your work space so clean!

@markoroolaid

2 жыл бұрын

The construction of the aircraft took 1 week, including drawing. Hours about 24h. The desktop must be clean at all times, that's the rule, it's the only way to make beautiful planes :)

I just made a wing with this method but with balsa sheet for the bottom and for the leading edges and foam in the middle but with normal glue epoxy 🤣I used ptfe boden tube and ran through the foam and put Petg filament through the tube as flexible linkages for seamless single servo ailerons works pretty good I did 3d print spares instead though as it was abit time consuming and im not going through that much effort again what foam are you using seems to cut really good

@markoroolaid

2 жыл бұрын

Hello Very interesting comment, thank you for that. I used Styrofoam foam to fill the stabilizer and wing filler. It is good to mill. interbauen.ee/styrofoam-250sl-a-n-80-pakk.html

Very nice! What type of plastic layer do you use in between the carbon and the vacuum bag? Seems like mylar but mylar would have a hard time conforming to the wingtip shape

@markoroolaid

2 жыл бұрын

Hi, mylar 0.25mm

@CharlesSnyder

2 жыл бұрын

I bet you could mold solar cells on top with this method.

@index7787

2 жыл бұрын

@@CharlesSnyder you can, I've done it. Use thick molds while curing, any shrink or flex can crack panels, but it usually works out.

Great build! I'm currently building it myself from the CAD files you generously included. However - I can tell that the boom (arrow shaft) is 7.6mm but - how long is it? cheers

@markoroolaid

8 ай бұрын

hi, about 760mm

Great build, I'm going to build it. The length of the carbon tube between the fuselage and the stab is missing. Please

@markoroolaid

10 ай бұрын

This is a bow arrow, 7.6mm

Very interesting thanks, is UV Resin a viable faster alternate? Laurie. NZ

@markoroolaid

2 жыл бұрын

Unfortunately, I don't know

Would it be possible to purchase one of your F3K DLG electric sailplanes ? It is exactly what i am looking for....

wonderful job. Magnificent. What 3D printer do you use?

@markoroolaid

Жыл бұрын

Ender 5 plus and Qidi X-plus

Marko im impressed by your skill level i only just got into 3d printing finding fusion 360 a steep learning curve could you send stl files for fuselarge thx in advance regards Tim from australia

@markoroolaid

2 жыл бұрын

Hi Tim, drawings are here: grabcad.com/library/dlg-style-electric-rc-glider-1

@gregpi1817

2 жыл бұрын

@@markoroolaid which slicer did u take? Cura? Can u give some details on how to print the fuselage? Thickness of the wall? Support. How long it take for u to print all the parts? Thanks

Hello Congrats for this nice build. My question, did you put a spring in the rudder ? thanks

@markoroolaid

11 ай бұрын

yep

@totolharycot2146

11 ай бұрын

@@markoroolaid that what I noticed. on my side it is something I barely try to do, could you give more details ? thanks

What is the opaque plastic? That you put the wax on? You have blue foam, carbon fiber, the coating, and then bag. It keeps the epoxy from sticking to the bag, and leaves a smooth finish.

@markoroolaid

Ай бұрын

Hi, this is Mylar sheet

Hello, thank you for sharing your work. Would it be possible to have the link for the Folding Propeller Clip and that of the propellers

@markoroolaid

9 ай бұрын

I no longer have that link. This propeller was available at my local RC shop, but no more. Too bad

Is rutabaga or spectrum better for flying rc planes

As someone who builds, flies, and repairs competition F3K gliders, I have a series of questions for you. 1. Why not a bias weave on the wings and tails? The bias would allow for a stiffer part in torsion. 2. Why not kevlar hinges on the tails and wing? 3. Why the 60gsm fabric on the tails? Glass tails are typically fine 4. Why didn't you use 3m77 to adhere the glass LE reinforcements to the core? 5.Why no beds to hold the wings while bagging to prevent warps? 6. Why no shear web in the wings? 7. Why bottom drive for the wing servos? This exposes the linkage unnecessarily.

@markoroolaid

2 жыл бұрын

you have so many questions

@EMTAx

2 жыл бұрын

@@markoroolaid 😂

@basgerritsen9669

Жыл бұрын

@@markoroolaid they're very good questions though, why wouldn't you explain the design choices you made? And if you later realized you didn't make the best possible design choices, why not admit it and learn from them?

can anyone explain how he gets the elevator and rudder to work when the wire push rod is so thin, shouldn't it not work because of too much slack? if he uses a spring to keep it tense where and how?

@markoroolaid

2 жыл бұрын

good explanation kzread.info/dash/bejne/lnxqzZmLZJzaisY.html

Spettacolo

@markoroolaid

2 жыл бұрын

thank you

Very nice concept. Which airfoils are you using for the wing?

@markoroolaid

2 жыл бұрын

airfoil is self-made, bottom straight, so it should only be milled on top. The leading edge is later rounded from bottom with a pad of sandpaper

@gregpi1817

2 жыл бұрын

@@markoroolaid thanks. I m eager to see how it behaves in still and calm air

excellent job, woul you share the materials you are using. if it is not a secret?

@markoroolaid

2 жыл бұрын

Hello. Do you have specific questions about the materials? Most of the material is marked in the video

Хорош!👍

Is that 347g including the stand? In my mind that seems heavy for carbon fiber, but I am just getting started and don't know as much.

@markoroolaid

2 ай бұрын

The plane could always weigh less, but for an electric glider, it is quite ok

WOW the wings seem so simple to make???!!

@markoroolaid

Жыл бұрын

Hello. Exactly, it seems to be easy to do. Actually, nothing very complicated, just difficult the first time

What material do you use between the carbon layers, to sand and be able to bend control surfaces?

@markoroolaid

3 ай бұрын

hi, this is nylon peel ply www.junksupply.com/product/peel-ply/

@zerodoze

3 ай бұрын

@@markoroolaid I use peelply as a release material... not as a layer between de CF.. I'll try here. Tks.

I downloaded the stl files, but when I checked the dimensions in Autodesk Inventor, I found that the parts are huge. Example: the diameter of the motor-mount plate is D770,93 mm. What could be the problem??? Thank you.

@markoroolaid

Жыл бұрын

I can't tell you what's wrong

Awasome work (and the black mamba is also terrific :-)) ! I've never made a carbon-formed polyester core model, but the quality of your video and the tip about using a vacuum packing machine really makes me want to give it a go. A few questions: 1°) on the leading edge of the stab, do you use fiberglass or peel ply (the material seems to be adhesive) ? 2°) The stab core seems to be made of styrifoam and the wing cores of polyester. Is there any particular reason for changing materials? Thank you in advance for the time you will pass to reply, and thank to share all your 3D model !

@markoroolaid

2 ай бұрын

I used fiberglass on the front edge. I tried to fix it with a thin 2-sided tape, but it is not necessary. With the resin stays very well. Styrofoam is very suitable for both wings and stabilizers. I myself used another material on the wings, because I had it at home ;)

@adesandre

Ай бұрын

thanks !

@adesandre

Ай бұрын

Hello Marko, to check : - for the vertical stab you provide two files, but i don’t see any difference between them ? - stab is 330 x 81 with 3 mm thickness. - vertical stab is 233 x 115 with 3 mm thickness. - wings are 750 x 165 with 10 mm thickness at the emplanture. thank you in advance for your kindly help.

How's the durability of the 3D printed pod? Is the weight comparible with a moulded pod?

@markoroolaid

3 ай бұрын

If you use nylon CF filament, the strength is super good. It is certainly not as light as making it with carbon and a mold, but at the same time it is very easy to 3D print it.

did u use carbon Fiber Spread Tow 80 gr for the Wing..? how about carbon fiber 200 gr? is that possible?

@markoroolaid

4 ай бұрын

in the video, carbon was 60g/m2. It is also heavy, 30g/m2 would be good. 200g/m2 is very heavy for this aircraft

Hola tienes la pagina para hacer la pieza en 3d

Hi Marko. Do you sell plans of your designs?

@markoroolaid

2 жыл бұрын

grabcad.com/library/dlg-style-electric-rc-glider-1

Hello, can you tell me what sheet of plastic you use at 2.50 minutes to get such a glossy surface? Thank you.

@markoroolaid

7 ай бұрын

Hi, mylar 0.25mm plastic film

@Archi_Miller

7 ай бұрын

@@markoroolaid Thank you so much!)

Hi Marko - what is the cloth weight/m2 of the spread tow?

@markoroolaid

2 жыл бұрын

Hi, 60g/m2 but it could be lighter, I couldn't get it anywhere in Estonia

@bracesport

2 жыл бұрын

@@markoroolaid same for me, but mine is worse @80g/sm2

@markoroolaid

2 жыл бұрын

@@bracesport I believe a good carbon for DLG plane would be 20g / m2.

Hello, thanks to shere your video. Can you tell what vacuum machine you use ( the brand ). Thanks

@markoroolaid

Жыл бұрын

Hi, vacuum machine link www.pakendikeskus.ee/en/packaging-machines/vacuum-machines/vacuum-machine-for-vacuum-bag-with-channels-30cm-wide

@pacgrafica4

Жыл бұрын

Thanks, Marko

@markoroolaid

Жыл бұрын

@@pacgrafica4 you are welcome

Any chance you could let me know what foam core and plastic sheet material this is? Thanks

@markoroolaid

Жыл бұрын

Hi. Styrofoam and 0.2mm mylar sheet

@coreybryan3668

Жыл бұрын

@@markoroolaid thanks!! And great work here

Hello I saw the links for all the electronics but can you also link the receiver? Thanks I loved the build 😄

@markoroolaid

3 ай бұрын

Hi, I used this receiver futabausa.com/product/r617fs/

@axelsmith209

3 ай бұрын

It says it has been discontinued

7:27 is this fishing line or a thin wire? how it comes that ur able to steer in both directions? i dont understand LOL! realy nice work by the way. thank you for sharing!

@markoroolaid

2 жыл бұрын

that is wire. The elevator and rudder are equipped with a miniature spring. Good explanation kzread.info/dash/bejne/lnxqzZmLZJzaisY.html

@xm4rux

2 жыл бұрын

@@markoroolaid Aaaahhhhh!!! Ok! That makes sense! As simple as ingenious. HAHA! Thank you!

@markoroolaid

2 жыл бұрын

you are welcome

The folding propeller does not have a link, what model of propeller is it to be able to buy it, or an alternative. Thanks

@markoroolaid

Жыл бұрын

Unfortunately, there is no link. I found it myself in a local model shop and there was only 1 of them there. Sorry, can't help more

@frandalzotto7244

Жыл бұрын

@@markoroolaid And what step of propeller and size to buy a similar one?

@markoroolaid

Жыл бұрын

@@frandalzotto7244 6x4 should fit

Would you consider making one in kit form I could buy and give to my.father to finish building as a gift?

@markoroolaid

2 жыл бұрын

Hello. Thanks for asking, but I don't make kits or sell planes. It's just a hobby for me

How much vacuum do you pull with that machine for your wings?

@markoroolaid

4 ай бұрын

About -0.5bar

@adrianmaree8352

4 ай бұрын

Thank you.@@markoroolaid

Wait a minute, did I just watch you cut the carbon cloth with a CO2 laser? I thought this was not possible, please explain more If you would!

@markoroolaid

Жыл бұрын

Hello. I myself also think about whether it will succeed or not. 60g/m2 was not a problem for cutting. I put wet cardboard under the cloth to prevent a flame. i have a 130w co2 laser. parameters were: speed 50mm/s and power 60%. I haven't tried cutting thicker fabric, there might be problems there, but I don't know

@DimensionMachine

Жыл бұрын

​@@markoroolaid The 130W is surely helping your cause, Still I am ipressed that it worked. I have tried to cut some 2x2 3k twill with a 60w, no luck. Just a mess.

Amigo que pena la ignorancia, pero como se llama ese plastico que le colocas, el encubrimiento

@markoroolaid

10 ай бұрын

Hi, mylar sheet 0.25 il.rsdelivers.com/product/rs-pro/mylar-plastic-film-304mm-x-200mm-x-025mm/7850802

What is the wing area?

How do you move so FAST!! Really strong covfefe?

@markoroolaid

Жыл бұрын

:)

Which printer are you using for this filament?

@markoroolaid

Жыл бұрын

Qidi x-plus

what is the name of the height sensor that shows how high the glider was?

@markoroolaid

8 ай бұрын

Barometer www.aliexpress.com/i/1005001494296466.html

@duoviss

8 ай бұрын

but this barometer dont have LCD

Never seen carbon fiber like that, nor have I ever seen it laid up the way you did. Are you sure this is carbon fiber and not just something you think is because it kind of looks like it?

@seantheberge5456

2 жыл бұрын

It's called "spread tow" carbon fiber. pretty common in the RC plane world.

@index7787

2 жыл бұрын

Spread toe cloth, he's using a really refined method, but it's pretty common in RC.

@basgerritsen9669

Жыл бұрын

It's just spread tow textreme carbon, but he didn't lay it up correctly, the bias should be at 45° to the span of the wing for increased torsion strength.

Which cameras are this in the glider?

@markoroolaid

Жыл бұрын

Hi, DJI ACTION 2

@eisenschweinchen5354

Жыл бұрын

Many thanks!

Very cool. I didn't know RC gliders were a thing until I saw your video. I wonder if adding a thermal camera would allow you to hunt for thermals?

@nubletten

2 жыл бұрын

Raiding crypto farms are we?

What kind off carbon fiber you use ?

@markoroolaid

4 ай бұрын

Hi, 60g/m2

DLG? “Discuss launch glider” I don’t know how someone would be able to grip that beautiful wing to spin it, and I didn’t see a handle. You did say “style” in the title but at that point just call it a powered glider.

@markoroolaid

2 жыл бұрын

you are completely right

100 лишних грамм кончено даже через видео передаются... не нужен ему мотор, он без него лучше летать будет)) Добра!

@markoroolaid

Жыл бұрын

Вы правы, но на электродвигателе взлетать легче ;)

@KpoJI9Ika

Жыл бұрын

@@markoroolaid так и скажи, я ленивая попа, и не хочу тренировать заброс хДД P.S. очень крутые технологии для гаража, я завидую тебе брат

@markoroolaid

Жыл бұрын

Честно признаюсь в своей лени :) :)

@KpoJI9Ika

Жыл бұрын

@@markoroolaid да уж, судя по работе- ты невероятно ленив хахах

What foam do you use for the cores? Thanks

@markoroolaid

7 ай бұрын

hi, styrofoam

@TomFYouTube

7 ай бұрын

@@markoroolaid regular EPS styrofoam or is it XPS or Rohacell? It looks kind of like Rohacell and if it is, what density? Thanks

@markoroolaid

7 ай бұрын

regular styrofoam

epoxy raisin... New bagel flavor?

@markoroolaid

2 жыл бұрын

Resin, sorry 😉

@mypronounismaster4450

2 жыл бұрын

@@markoroolaid lol.... nice glider..

what is the airfoil of the wing ??

@markoroolaid

Жыл бұрын

Hi. NACA 3414

what sized carbon fiber tube is needed?

@markoroolaid

Жыл бұрын

7,6mm

@sylaswojciechowski6895

Жыл бұрын

@@markoroolaid how about the length of the tube? I could always play around with lengths, but dont want to buy a tube that is too short/way too long.

@markoroolaid

Жыл бұрын

I used a 32`` carbon bow arrow. Weight 25g

Where can I buy carbon like you use?

@markoroolaid

22 күн бұрын

Hi, link here www.r-g.de/en/art/190267HM-100

How many hours worth of work did this take?

@markoroolaid

Жыл бұрын

about 40 hours

Whats the Weight of the wings ?

@markoroolaid

7 ай бұрын

Hi, about 120g

where is this...?

@markoroolaid

2 жыл бұрын

In Estonia

Hello! Which carbon fibre do you use?

@markoroolaid

2 жыл бұрын

hi. 60g/m2

@waxwyshow8943

2 жыл бұрын

@@markoroolaid thanks

This music is awful but the plane is a work of art I wish I had the tools to make molded carbon fiber wings

@markoroolaid

Жыл бұрын

thanks

Cool but music choice leaves something to be desired.

@markoroolaid

7 ай бұрын

Ok 🫣🫣🫣

100%100

why'd he censor the word resin?

@markoroolaid

Ай бұрын

There was just a typo. Nothing special

So this is an instructional video for people who have a full CAD, 3D cut and configured shop? And absolutely no regard for OH&S

Great build video BUT! No gloves????? Really? YOU can make that choice and risk building a reaction over time but you shouldn't set an example to others for it.

I really want to know why so many people use chipmunk music on youtube.

@markoroolaid

2 жыл бұрын

😉

@paulpalmer267

Жыл бұрын

What is the weight of your f5k glider ready to fly?

Now I know why my 1m dlg cost 400.00…

@markoroolaid

Жыл бұрын

yes, there is really a lot of work