Nice Video! I like how it shows a lot of the intermediate fabrication steps. Most consumers don't understand the labor and skill required to make certain products, and this video certainly helps with that.

@Josh-zh

7 ай бұрын

Products that steal American intellectual property. A land of thieves.

@trichoubdz9210

6 ай бұрын

11:34 11:34

@trichoubdz9210

6 ай бұрын

12:42 12:43 12:43

@trichoubdz9210

6 ай бұрын

12:42 12:43 12:43 12:43

@trichoubdz9210

6 ай бұрын

12:47

I was wondering if it was going to be a VTOL or just a drone with wings. Was nice to see that they cut the lift motors for forward flight.

These guys take their time and do a good job. I was surprised/impressed to see at all of the Carbon fiber inner structure. The videography and video length is just right for me, more please.

@robert5

6 ай бұрын

I think that inner structure was needed to mount and secure the electronics and controls systems and perhaps the batteries.

Excellent drone design and manufacturde and flight. This company really knows what its doing, and has some amazing engineers ! Well done!!

これはドローンの制作工程ですね。ホビーではなく兵器としての性能を備えた制作現場の映像は素晴らしいです。

I recognize all the actions carried out in the procedure...some even done in a somewhat rough manner although with a satisfactory result..

Great video, and build looks like very high quality. Brought back some memories from my earlier days doing RC model aircrafts.

Those blue masks look very efficient at stopping small particles from entering their lungs.

@amago

17 күн бұрын

I guess they are even more effective than the invisble gloves and the transparent painting garments.

Just for the irony, I would have loved to see a 20x20 flight controller running AruduPilot, lol. That is a beautiful creation, thank you for sharing the layup to the the flight. Bravo!

@Ph4nToMfr

7 ай бұрын

I flown this kind of airframe with ardupilot (pixhawk though)

@darrenpferdehirt

7 ай бұрын

30.5 x 30.5 on the Holybro Kakute F7, and supports both Betaflight and Ardupilot. I have one on an Iflight XL10 running BF, if I want to torture myself again, I'd switch it to Ardupilot and relearn what I've forgotten. Probably won't though. Lol...

This was a fascinating video and I really appreciate you sharing it. It would be very nice to see the employees wearing quality respirators when painting

@lordhexon

7 ай бұрын

Yes, but they have some what decent ventilation vacuum system.

@williamhoughtaling1602

7 ай бұрын

That is a waterfall filtration system. No fumes at the painting area and the water catches the paint overspray.

@danielkemp4860

7 ай бұрын

They're worried about c0vid, not resin fumes 🤣

@sicks6six

7 ай бұрын

I sprayed Cellulose coatings on pipe coverings for the petrochemical industry and we used waterfall filters and didn't need a mask, waterfall filtration systems remove 100% of all airborne particles from the air, in this booth all the walls and ceiling are extractors and air is drawn through a waterfall which is the full length of the walls and six foot high, very impressive filters, the paper mask is common in china for everyone to wear all the time, they had a huge problem with TB and the government ordered every school kid, shop worker and public employee etc to wear them in an effort to help eradicate the TB virus,. PS it's a fantastic machine don't you think. . . .

@shargunankalimuthu514

7 ай бұрын

R 2:29 6🎉@

Very nice! As I've already mastered everything else required to build one of these, I now just need a vacuum bagging system. Making the molds is a pain, though. My current method of constructing UAVs is laminating hotwire cut polyurethane foam with fiberglass and epoxy resin.

@tyyamnitz8408

7 ай бұрын

What kind of UAVs do you build?

@abcdefg4570

7 ай бұрын

@@tyyamnitz8408 ~2m wingspan long-range UAVs for ultra long-range missions. It's mainly for fun, just to take beautuful video and enjoy the views and flying anywhere. It's an incredible feeling of freedom. Designing and building the UAVs and configuring the GCS equipment is half the fun too.

@tyyamnitz8408

7 ай бұрын

@@abcdefg4570 that is so epic. I’ve started the process of making my own as well because I have all access to my university’s labs and hacker spaces but this will be my first aerospace project so I don’t know where to begin. Do you mind sharing your design process that takes place before you even start with construction? Do you design the uav in OpenVSP or some other software? Or do you just use pen and paper

@hitleraliraqi

7 ай бұрын

@@abcdefg4570انا ايضاً اريد التصميم او المخطط وشكرا لك

@AndreyOdessa999

6 ай бұрын

How can I contact you?

Que perfección... Digno de admirar!! ❤

What is the angled scraper/knife your using? I need one like that 😊

This video was amazing. I really enjoyed watching it. It might be a good idea to make one of these next to my foam planes.

Parabéns. Isso pra mim é a realização de um sonho. Gostaria de puder conhecer a fábrica

Awesome these guys really know what their doing

thank you; this looks like a "state of the art" shop. Nice to see "natures composite" (the plywood) combined with a thin layer of carbon fiber in a sandwich material! (Now if we could teach trees to grow the intricate shapes that we wanted!) This craft is still performed mostly by hand by skilled people. Gotta appreciate the "sushi chef like skills" that are required to trim the finished pieces after removal from the molds. 15:08 I'd never seen that water bath spray booth process before; but it makes sense that it would be REALLY good for dust/ overspray particulate control. Everyday; the dumpsters are going to be FULL of all of the the high tech consumable materials that are necessary for these processes. Looks like YANGDA and FOXTECH are direct competitors?

Omg its just so easy - the next free 6 weeks I get I'll get started on one!

Me encanta¡¡ un video muy demostrativo de la calidad de contruccion de los droenes

There's nothing ground breaking or original about anything there, just a bunch of excellent craftsmen who make a well designed vtol. I thought the custom pdb and esc board was cool, using large easy to repair components. Really cool

Excellent video. Love that they just run ArduPilot. Now, where can I get one?

Excellent video. Love that they just run ArduPilot. Now, where can I get one?👍👍👍

In my younger days in the 1970s used to make aircraft parts out of fiberglass. Times have changed.

Excelente acá en Argentina fadea hace el ia-100 Malvinas con estás tecnología. Un avión hecho íntegramente en materiales compuestos. Gracias!!!

I like the single pusher prop idea for long loiter flights!

Great. I only wish there were CAD files and schematic available for download :)

@RICKY-RIKON

21 күн бұрын

Keep dreaming dude! 😂🎉

Молодці! Гарний результат!

Wow - fantastic build! And simple but very clever overall design.... I believe we will see many similar designs to this in the near future - with the flying cars that are coming..., Bravo!

@aerbon

4 ай бұрын

i don't think flying cars are coming in the near future. it's not that we can't make them, it's that the idea itself makes no sense when you look into it.

Awesome design and superb technology 😊

wow i am giving up making model planes this standard is the best

Thanks for sharing. Excellent drone manufacturing video. Now I understand why carbon fiber is expensive because it's labour intensive work.

Da hora, magnífico

Супер современные карбоновые технологии полностью базируются на ручном труде и массе отходов производства.

Технику безопасности еще повысить и вообще молодцы.

Que coisa mais linda!

This was incredible to watch. Looks a very nice bit of kit!

Nice production work. However..... not enough glove or proper facemask usage! Different countries and different standards I guess? Handling mixed resin on a daily basis even if just a smear on the fingertips is a bad idea long-term and if there's a tendency for dermatitis it's accelerate it massively! Paint shop had a nice water shield booth but those guys should have had appropriate masks, not just simple covid/surgical ones.

@Tony-.

7 ай бұрын

Perhaps the fans are installed not for cooling, but more for ventilation. If the air flow is good, the damage is reduced, but not eliminated.

@giuseppe4909

7 ай бұрын

And now you see why they can make things for less money… (not to mention the much lower wages paid)

@alexmcmeekin2658

7 ай бұрын

@@giuseppe4909 Yes, but that's the way things are. Wages are cheaper in differing parts of the world, but when learnt the skills are as good.

Voilà un des futurs des armées modernes.

Хорошая работа, качественная.

Built my own bait boat in carbon years ago in the half hour tea break with vac bag then autoclave, this model aircraft is easy

Teach us Drone Electronics ! So AWESOME DUDE !!! 🙂

Brilliant guys, thanks.

Me sorprende un tanto que no usen fibra de carbono preimpregnada. Resulta muy cómoda de usar.

fantastic work guys! but as someone that has worked a car t bodyrepair and painting, you should really invest in better breading protection. using so little as you do, you will end up with lungproblems after a while. it costs a bit more, but it is better to invest in the good equipment, and stay healthy for longer, this pays of both for the workers, and the company you work for, there will be less days of sick, and the company can keep good workers with special experience for longer.

@TuttleScott

7 ай бұрын

just what I was thinking, surgical masks arent going to cut it.

danke, this is a very EDUCATIONAL + THOUGHT PROVOKING VIDEO, nochmal DANKE DANKE DANKE ALLES GUTE

Please provide details on the Telemetry and VTX range

Brilliantly made

Seeing how these guys are making "commercial" drones, I can't help but wonder what their market is. This ain't no park flier. By the size, materials and technique, this is not a cheap plane by any means. Interesting that it has a defined cargo area. Very interesting and I hope to see these in actual use. Is this a prototype for Amazon ???

Nice work and excellent craftmanship. Thanks for sharing.

so good quality. I really like products made from carbon...

멋집니다.

11:03 - Seeing people with no protection on their hands working with epoxy... Oh my god this is really not good for their health.

@slange455

7 ай бұрын

Looks like any other fiberglass/carbon shop I’ve see…even in the US boat builders don’t use much more protection

@marc_frank

7 ай бұрын

i only use gloves because i don't want to wash off the sticky mess

Is a Kit available for purchase? Or otherwise at least a List of electrical avionics hardware required?

OMG... That's a real no waste production 🤦🤦🤦 Am I the only one who understands that those guys will have allergies in a couple years both for epoxy, lots of foods and plants?

@giuseppe4909

7 ай бұрын

And the corporate owners don’t care at all.

Amazing job

I'll take 3! Some slick kit.

Very nice. Good video. Just one thing ... a little better extraction and masks in the paint booth - your lungs will thank you.

simple and reliable seperate fixed motors for drone mode and plane mode. slight drag and weight penalty. however the drag penalty could be easy reduced bij proper lining up the props. bldc motors can be stept bij software like a kind of crude stepping motor.

Very well done

just awesome guys!

this thing is NICE

"You are very smart, I like your work."

*Excellent man, thank you for sharing your work, God bless you*

Nice construction. Good luck grinding fiberglass and carbon fiber without a respirator though.

In Germany we call it "Hobby" ( and we love to say ) sounds strange but it is true!

I don’t know where these come from, but Russia would love them, so I guess they will have a visit soon!

Excellent ! Particularly liked the the fine detail and craftsmanship displayed. Thanks and Regards !

better lifting rotor can be folded..maybe for next ..😊

Thank you video brilliant compliment

Sangat canggih ❤❤

做的非常不错

I was absolutely astounded by the craftsmanship of the workers. Applying beads of glue as if from an industrial robot.

Very impressive. Thanks for sharing.

Superb !!!

thanks so much, you made my day.

Thank you for this video, What is the material layer between the layers of carbon ?

@Digitness

7 ай бұрын

Maybe fiberglass

@CaptainFluffen

7 ай бұрын

foam core

@user-fm3bl7dg3q

7 ай бұрын

@@CaptainFluffen Why is this needed?

@marc_frank

7 ай бұрын

​@@user-fm3bl7dg3qit's a core material, it's only there to make the skin thicker, as thickness creates stiffness and filling with carbon would be too heavy

@trevor5290

7 ай бұрын

@@marc_frank And to add to this comment.. making a sandwich with CF, Core Material, CF, and then fiberglass makes this light but also insanely strong and expensive. I was surprised to see them add the second layer of CF

This video is greatly appreciated It has inspired me to do more as I never considered using my laser to cut air frame components or the tools so they can be made from hydro formed aluminum or vacuum formed ABS or Carbon fiber tow. I have never considered using a heater in a closet or closed off room as an oven to speed up curing. 😅 Brilliant. Well done.

@Willy_Tepes

4 ай бұрын

I have used a heater in a closed off room before, but only in relation to sugar fermentation and plants ;) What is sorely lacking in this workshop is a spot ventilation system and proper breathing protection. Those guys are going to lose half of their brain cells before they hit 40.

Bravo 👍💪 👍💪

what is the range of this drone from the take off place and air time? and how silent is it? plus the lens on its camera? 200-500mm?

How much does the entire factory cost with all its parts ?

Damn I wish someone would assist me modifying my current facility to this level

@eheheheheheheheh

7 ай бұрын

a whip will do..

@stefanodaulka9313

7 ай бұрын

If you want, I can help you. I'm a mechanical engineer. Easy

Awesome!!

Very cool building process video!!! 😊

Nice drone!

Video wonderful interesting very very beautiful from Iraq 🇮🇶 I love ♥️ you all the South 🇰🇷 Korean people

EXCELLENT

No doubt carbon fibre is 'state of the art' but how much of an advantage does it offer over conventional glass fibre for this application?

@pcka12

7 ай бұрын

@@Dobbs65 yes, but this is a fairly low stress application, so does it make much of a difference?

@giuseppe4909

7 ай бұрын

@@pcka12That’s because it hasn’t been loaded with a payload yet.

@deadcxap755

4 ай бұрын

Lighter, more durable.

@pcka12

4 ай бұрын

@deadcxap755 it is customary to provide 'ratios' then quantify the results to give some indication of benefit!

Professional construction. What is in the piping bags? Gelcoat? Or PVA glue?

how are you smoothing out the thin strip that goes between the two fuselage halves once you put the top on?

Whats the white material that they fill in the molds?

good work !

thats awesome

Amazing! 😁👍🏁

when they put the carbon frame into the matrix, what did they fill the internal space with? to form the wings themselves?

Would be cool to have the "lift" propellors rotate forwards to contribute to the thrust in forward flight rather than just have them be dead weight and extra drag.

@drgeoffangel5422

7 ай бұрын

Yes thats the ideal design configuration and then you dont need the tail pusher propeller. There are drones that do this already!

@KevinATJumpWorks

7 ай бұрын

It's about complexity. You can have a tilt motor mechanism, but it adds a lot of weight and many moving parts. Also, you would probably need a variable pitch propeller to account for the differences in air velocity between hover and cruise, which again adds more weight and complexity. I agree that, tilt-wings in particular, are the most elegant solution, but they are very difficult to get right.

@rjward1775

7 ай бұрын

Below X size, the mass penalty for this is probably lower.

@Ph4nToMfr

7 ай бұрын

Fixed vertical motor is far more simple and reliable too

@deadcxap755

4 ай бұрын

@@KevinATJumpWorks Why variable propeller pitch?!?! The force is regulated by engine speed. This is not an internal combustion engine, electric motors perfectly and quickly control the speed of revolutions.

Allah bless you

Parabéns.

根据摄像机平台防抖要改进，噪声也很大

So Africa we need this technology please 😮

I love innovation