Easiest Way To Add Aftermarket LED Lights To Your Toyota Tacoma
Автокөліктер мен көлік құралдары
Cali Raised 8 Gang Panel: bit.ly/4263xRr
Code: TRDJON5 = 5% Off
R4T OEM Style Switch Panel: bit.ly/444Prkq
In this video, I show you how to install an 8 gang vehicle light bar accessory switch controller into my 2023 Toyota Tacoma TRD Pro. I also add a Runnin For Tacos switch panel controller bezel to retain that OEM look with the Cali Raised LED switch panel.
Become A Member: bit.ly/3K6vOhv
DISCOUNTS HERE: linktr.ee/trdjon
My Instagram: / trd.jon
Affiliate links allow me to produce more content for you all. It also allows you to get ideas of future upgrades you may want to have! Thank you for your support.
The R4T Tacoma switch panel will accept an Auxbeam, CaliRaised, or Switch Pro 8-switch controller. When using a Switch Pro with the panel, you will need to use the included Switch Pro Adapter. Also included is a new rocker switch face for the cab light aka jelly fish launcher.
The R4T switch panel allows for (5) SMALL style Toyota switches along with an 8-switch panel. This will provide the maximum amount of accessories on one panel. If you don't plan to run that many small switches right off the bat, we have blank switches to fill in the empty slots.
Cali Raised LED is thrilled to offer this 8 switch control system with blue backlighting for the Toyota Tacoma. It operates at 12V / 24V with a 1,200W maximum power, enabling you to control 8 sets of LED lights and accessories together, which not only saves space but provides a cleaner look as well. They feature high sensitivity, stability, and strong anti-interference capabilities. The self-adhesive labels allow you to define each button according to your needs.
#toyota #trdjon #trd #trdpro #4Runner #Tacoma #Tundra #Overland #offroad #trail #truck
00:00 Introduction
00:14 Tacoma Switch Panel Unboxing
00:57 Cali Raised Switch Panel Installation
03:03 R4T Tacoma Base Switch Panel Installation
07:33 Switch Panel Wiring
Пікірлер: 45
Cali Raised 8 Gang Panel: bit.ly/4263xRr Code: TRDJON5 = 5% Off R4T OEM Style Switch Panel: bit.ly/444Prkq
Man I dunno if Jon likes sayin ‘runnin for tacos’ or ‘caliraised’ more, hard to tell. My money is on ‘runnin for tacos’!!! All jokes aside, those switch panels are sick!!! Kinda like my old F2FIDDY’s upfitters. Those panels look good at night when they’re lit up!!!
@TRDJon
Жыл бұрын
For sure do. Thanks for watching man!
Sweet. Seems pretty straightforward. Thanks.
@TRDJon
Жыл бұрын
Of course. Thank you for taking time to watch
I have an Auxbeam 8 gang maxed out 4 pods behind the lower grille, light bar behind upper grille, 4 pods mounted on the hood, and 4 rock lights. Two switches work as backlight/DRL for the grille lighting It’s a lighthouse at night And the rock lights for street driving really does make people pay attention when we merge lands lol but they help when we mob on trails at night too.
@TRDJon
Жыл бұрын
Heck yea!! Auxbeam is an option too that works well!
I need one of these for my 5th Gen 4Runner...
@Papolucho702
Жыл бұрын
Do it! I got an auxbeam 8 gang and it’s maxed out lol 4 pods mounted on the hood, 4 pods mounted behind the grille on the lower bumper Light bar behind the upper grille And 4 rock lights. All the grille lighting has backlighting too.
@TRDJon
Жыл бұрын
Yesssss. Honestly makes lighting up so easy. Just to not run all those wires through the fire wall is worth it to me
Build is looking great so far Jon! Hoping Running 4 tacos does a switch pod for the Tundra.
@TRDJon
Жыл бұрын
They are working on it. 👍🏼
That’s awesome I need that 🤣
@TRDJon
Жыл бұрын
For sure. Super easy install. Whenever I do lights in the future. This is a must.
Any idea about a dlr switch? Find it annoying that they are always on from the moment the motor is on.
Man I wish they made that trim piece for the 4Runner
@TRDJon
6 ай бұрын
I think R4T has one similar for that
First comment! lol.. I'm wanting to do this to my Pro as well since I added multiple Diode Dynamic fogs and ditch. The only drawback to the Cali Raised panel is the cutting on the truck. Other than that, is super clean and oem looking. Great video Jon! Thank you.
@TRDJon
Жыл бұрын
Thanks! Yea there are a variety of solutions but I just found this to be super easy. I’ll never run a lot of switches again like I used too
@WITCHBANE
Жыл бұрын
Any other leads that you can provide for a switch panel you're comfortable endorsing?
@TRDJon
Жыл бұрын
This one is pretty universally use and Cali raised does offer a 2 year warranty which is nice. But there are cleaner setups out there. Obviously more $$. Like switch pros.
@WITCHBANE
Жыл бұрын
@@TRDJon I was actually looking at the switch pros, and yep, more $$ for sure. I love the oem look this provide, and I didn't see the 2 year warranty from Cali Raised, hmmm. That sounds very appealing! Thanks again Jon
@TRDJon
Жыл бұрын
I believe I saw it in the description of the part itself
Damn, wish they made something like this for the third gen Tundras.
@TRDJon
Жыл бұрын
R4T is working on it 😉
4runner needs something like this, only thing stopping me is the bulky panel design from all these companies.
@TRDJon
Жыл бұрын
I think R4T had something for the 4R too
its just an Auxbeam rebrand? the OEM panel looks nice though
@TRDJon
Жыл бұрын
Auxbeam has similar. Maybe same manufacturer
You should install an in dash trailer brake system in one of your blank switch holes
@TRDJon
Жыл бұрын
I won’t be towing with this Taco
@DJTruth_1970
Жыл бұрын
@@TRDJon gotcha. Thanks.
@TRDJon
Жыл бұрын
No worries! Thank you for watching.
@DJTruth_1970
Жыл бұрын
@@TRDJon I found a Red Arc trailer brake system that the box (small) mounts anywhere under dash and the small control dial goes in a factory looking switch cover they provide. Works extremely well and looks as factory as it can look.
@TRDJon
Жыл бұрын
I’ve seen that one awesome. Super small and simple it seems.
Is the moon roof still fully functional?
@TRDJon
2 күн бұрын
Yep!
Junk