Dynam Hawker tempest Build 1250mm RC airplane warbird PNP
Affiliate product LINK www.banggood.com/Dynam-Hawker...
RadioMaster Affiliate LINK www.banggood.com/RadioMaster-...
Battery I used Affiliate LINK hobbyking.com/en_us/zippy-com...
Model: Hawker Tempest
Material: EPO Foam
Wing Span: 1250mm (49.2in)
Flying Weight: 1500g
Wing Loading: 49.5g/dm²
Fuselage Length: 1018mm (40.1in)
CG: 55 -60mm from the leading edge at the wing root
Motor: Detrum BM3720A-KV600
ESC: TC Skylord 40A ESC upgrade to TC Skylord 50A ESC 5A BEC(Sept 16,2020)
Propeller: 3-Blade Prop 13*7*3
Thanks for Watching
Like comment subscribe
Пікірлер: 15
Port wing should have a red light. Nice aeroplane but one can`t be too fussy where a foam jobbie is concerned I feel. As you say yourself "Good enough" lol.
@blowy48flyrc
2 жыл бұрын
Nice
I have one made it into a saber by taking. Off the radiator air scoop.
Dave’s RC saiid it was the best flying warbird in his collection.
Just ordered this from general hobbie if I get it. But dose this have a 48 inch wing if it dose I think I got the same one. This will be very helpful. I will need it to put mine together . Thanks very much very valuable info.
Would this be good for my first plane? I already know how to fly.
A short video of how you wired up would help too.
@blowy48flyrc
3 жыл бұрын
yes good idea i have thought about this for quick setup n bind for couple diff types of planes
Where is the quality control?
Good video mate. What laquer did you use to paint over the foam?
@blowy48flyrc
3 жыл бұрын
acrylic with a spray gun 1 coat
@blowy48flyrc
3 жыл бұрын
Remember to test first and don't paint in the cold
@Phoebegumnut30
2 жыл бұрын
Could you give a brand name and is it a Bunnings type product or a Model Shop product
@jsonb4600
2 жыл бұрын
@@Phoebegumnut30 I ended up using White Knight Crystal Clear Acrylic 310g rattle can from Bunnings. You have to spray at a decent distance and very very light coat otherwise it will melt the paint/foam.
Looks so wrong with a 3-bladed prop.