Пікірлер

• 
  @Astrouie3 күн бұрын

  The motor is just for takeoff and altitude gain putting a very good motor on a glider would be a waste of money. If you’re only going to fly it with the motor then why get a glider?

• 
  @craigmcdonald-rcgliding9 күн бұрын

  Awesome build video... are you still making videos..? Really enjoy your channel...

• 
  @Itzkeegs13 күн бұрын

  do a filp

• 
  @nevTk-oe9ud15 күн бұрын

  same for Radiomaster boxer 4-1 M8? cheers :D

• 
  @nevTk-oe9udАй бұрын

  Any way to reverse sticks on default transmitter mechanically mate ? Only cuz I fly mode 1

• 
  @BuildTimeMCАй бұрын

  The reason why it fell apart midair is probably because your speed was high and you pitched up fast, which increased the load factor on the wings

• 
  @NIRAJPATELVАй бұрын

  Excellent review Can you please help me with the exact Length of the Fuselage alone without assembly

• 
  @weseehowcommiegoogleis3770Ай бұрын

  I think there's some useful info in here. But, I just cant stand listening to a male talking like a Reject from English class. WHY do you raise the octave of your voice on the last word of most sentences?? Drives me insane!

• 
  @NIRAJPATELVАй бұрын

  Very helpful video Cheers Need a little help Can you please tell me the Plastic Fuselage alone exact length

• 
  @charlestodt740Ай бұрын

  Mine also runs on 4 cell Lipo. It is amazing plane. Extra weight not a problem

• 
  @JuanJose-bv2ccАй бұрын

  Hi can it be set with a v.tail? thanks.

• 
  @AltijdGijsАй бұрын

  Would this be good for my first plane? I already know how to fly.

• 
  @joerideceulaerde7444Ай бұрын

  Maybe its the servo end adjustment that ain not set to 100%, wenn you lower it it might not calibrate? Ist an option to try?

• 
  @FroggabilityАй бұрын

  I have a Mustang, Messerschmitt, P47 Thunderbolt, Spitfire. With a lot of skill can land on the cricket strip on its wheels. Ok im jealous of those landings

• 
  @StickJockeyFPV2 ай бұрын

  Can the gains be adjusted on this gyro? My plane gets rapid vertical oscillation when I do a fast loop and switch into beginner / auto-level mode right after.

• 
  @thorvelasco14672 ай бұрын

  Very nice. Seems to want to stall easily on bank turns. Nothing that more power can't correct.

• 
  @roadstar4992 ай бұрын

  I have 2 new 60c 3s 4500 packs that are 325 grams..i am ordering kit version i have a nice 3536 1100kv which may also weigh a bit more than stock motor..anyway to me it looks like i may be able to get balanced without adding weight...thanks for sharing😊

• 
  @sladelefty2 ай бұрын

  all right fair dinkum

• 
  @roadstar4992 ай бұрын

  Screw those gyros...i never used them...when i did i alao had stupid crashes like you had...you have to have them set up perfect or you are much better off without them

• 
  @roadstar4992 ай бұрын

  That was a nice easy landing. This plane seems really locked in..

• 
  @roadstar4992 ай бұрын

  You are using just a plain reciever no gyro at all...this is a very nice nice pusher prop jet...my kit came boxed well and seems to have all the parts...great job!

• 
  @anthonybru53402 ай бұрын

  Thank you so much!! I’ve been trying to figure this out for months!

• 
  @roadstar4992 ай бұрын

  Great plane..to bad they stopped selling them.😢

• 
  @cassiedavidson54752 ай бұрын

  is there anyway you tell me how you set up channel 7 and if you used inputs and /or mixxes and what all options you used icluding switches, weights,....ect?

• 
  @roadstar4992 ай бұрын

  I know stock radios are not that good especially in manual mode,but do you think your radio was crappy or do you think they are all crappy

• 
  @StickJockeyFPV2 ай бұрын

  Which receiver did you use in this 750mm Corsair?

• 
  @KalibasauRC_643 ай бұрын

  Nice

• 
  @williamcrane82363 ай бұрын

  I'm running a Taranis with a IRangeX module in the back. I found that if I hit the stunt switch and let get, it never did the stunt BUT I put the slow dn for 2 seconds on the switch and now I hit the switch pull up or roll and the stunt is done. Got back from half a flight in expert mode. Still a little twitchy on the roll and elevator. A little less throw and a little more expo, we'll see if I can't smooth that out some more. Plane was tailheavy and hey, may still be but it's much easier to control now. But to be honest, with all the wind running around here it's easier to put it in sport mode where you can loop all ya want but have to hit the switch to roll it. Make sure, on V2 planes (clear canopy) to give the One Click Launch a try. Beginner mode, throttle down, push the stunt button, throttle up and launch level. Plane climbs out for 4 or 5 seconds and then starts to orbit. Make sure and throw it into the wind and that there isn't anything for you to run into there. You're control inputs will take it right out of Autolaunch so you can avoid objects. The wind changed on the second one that I tried, first one I had the switch in expert, just as I threw it and it augured up in the air like a FF plane and then started the orbitting. Was pretty cool once it got above my Hedge Apple tree. Dang stickery thing has eaten more then one of my planes.

• 
  @roadstar4993 ай бұрын

  Only thing i would like is battery compartment on top and added flap option like the phonex 1600 has..everything else seems perfect..

• 
  @DKNguyen3.14152 ай бұрын

  I also like flaps, whether they are needed or not!

• 
  @roadstar4993 ай бұрын

  Wow that is a big one...landing gear looks well made..do they sell it on kit?

• 
  @roadstar4993 ай бұрын

  Once you set the elevons correct it turned out to fly beautifully.. Actually these being noisy is good especially if it gets further away they you wanted it to and loose orientation..the noise helps you at least know if its coming back or going even further...i cant tell you how many times i crashed on of these type of planes after letting it get to far...i always say never again,but it just happens and you want to kick yourself

• 
  @roadstar4993 ай бұрын

  Your elevons are neutral point is way to low...it will nose dive dramatically..needs to line up with the lines on the fuse...actually slightly higher is a good idea for maiden...these planes are just like the zeta blaze elevons..

• 
  @carlosjimz3 ай бұрын

  Thanks for the info on setting up these planes, im new at edgetx so . Im trying to set the stunt button to work , but the way its explained here, it activates the stunt as soon as you flip the switch ,instead of making ch 7 active for when you move the stick to command the stunt, I know it can be done with logical switches, but unfortunately is out my knowledge how to do it. Thxs

• 
  @FrostyDaCat3 ай бұрын

  Would you recommend this as a trainer? Please respond, thanks👍

• 
  @eckiger_luki64242 ай бұрын

  yes its a trainer plane and has a very forgiving flightmodel while still having rudder and ailerons so its great to learn on and if you buy it while on sale on banggood for 80€ its as cheap as rc planes get atleast this size

• 
  @FrostyDaCat2 ай бұрын

  @@eckiger_luki6424 i already bought a few weeks ago when it was on sale for a whopping 60€! The plane arrived, im still waiting for my fpv geat though!

• 
  @roadstar4994 ай бұрын

  I love these type of planes..this one here can actually take horrible crash and is still fixable...i print hard nose on 3d printer for my radjets and blaze which gives them extra protection..this stinger actually uses same wing as zeta blaze and astro,but imo its a nicer looking fuse..astro and blaze have 3 edf holes so you can power them with 1 64mm edf or 2 50 mm edfs or like i do make it a pusher prop jet...

• 
  @roadstar4994 ай бұрын

  For those into foamy warbirds this seems like a great 1200mm choice...not sure if its as nice as fms or arrows, but it may very well be.thanks for sharing

• 
  @sgtarechiga4 ай бұрын

  Hi, could you share the Radio setup please. The .bin file on HK does not seem to work and reaching out to them only directed me back to their file, which does not seem to work...

• 
  @random_g-man97544 ай бұрын

  Do you think he thought it was “very nice”?

• 
  @michaelshay80664 ай бұрын

  Great video - I've tried this before and it didn't work. This fixed it. Also, learning something new here too. You use "Max" setting. Can you share what that is? I've tried Googling but no luck.

• 
  @FarmerFpv4 ай бұрын

  She's a screamer. lol

• 
  @samucapb24 ай бұрын

  So, Is the P40 worth it? Thanks!

• 
  @crystalbusenitz54264 ай бұрын

  The landing gear don’t look right

• 
  @crystalbusenitz54264 ай бұрын

  Sounds like the propeller is unbalanced

• 
  @Drones_Eye_View4 ай бұрын

  Please show a plane in the camera's view...showing it off the top doesn't let you compare. Just back up the camera and be slightly further away.

• 
  @alexanderstoner43064 ай бұрын

  Can you give me some instructions on how to get an XK 6 transmitter to bind with my new p-51. There’s no explain how to link(what do I do) it’s supposed to come already set up? Any help would be greatly appreciated.

• 
  @Bellakelpie5 ай бұрын

  Really good outcome. 😊 Another tip. Try putting a few streaks of dull silver/aluminium coloured paint along the wing and horizontal stab leading edges, also around the fuselage immediately behind the spinner, to where stones and other f o d , commonly found on grass strips, has taken the paint off, and bare metal is exposed. Its best done with a thin paint brush rather than an air gun.

• 
  @intothenight756d475 ай бұрын

  Great quiet vid with lots of clues. Quiet confidence. Made up my mind for me. Can you explain or direct me to a cleavis fitting video?

• 
  @verify955 ай бұрын

  Anyone can help reprogram this plane for me? I have one, but the rudder is stuck to the right, and elevator servo throw is very minimal. How do i reset everything and set controls like factory? Ailerons and throttle seem fine. I only have the stock transmitter that came with it. Thanks!

• 
  @ivansaenz2055 ай бұрын

  Hello, tell me please, is it possible to bind a flysky Fs-I6x with a wiltoys f949s receiver ?

• 
  @agachoun77465 ай бұрын

  Yes great video for great planes! I struggle to set up the calibration on a 2-, position switch. How making it going from -100% to 100%? I can only go from 0 to 100%. I tried 200% weight, 100 offset, .. curve... But no success. Please help me....