Love the idea 💡 can’t wait to see it run

Your evil genius plan is coming together nicely my friend.i like the way you think.keep them gears grinding harv 👍

That is just too cool Harvey! That is a crazy build man! Very excited to see it come together! Peace!

It’s coming together nicely Ironhorse ! Thanks for all your work on the shop Chris!

Thanks Chris for all the hard work into the saw shop.

its nice to watch all these videos and learn the possibilities , ive done wild things to cars but this is fun

Harvey you have a very special mind. Your understanding how these saws breath is amazing . I say breath because you give them new life. They get to live a life they would have not otherwise had. You explain thinngs like a surgeon. I understand everything you say but i still dont think i will ever be able to pull it off. God bless you and anyone that can do it. I am really going to have to get one of your working man saws some day to feel what you build. Love what your doin. Love watchin you and your family no matter what your doing. Keep up the good work my man. Keep enjoying your days above the stumps .

The lights are really good in you're new saw shop mate we can see every thing now very nice mate

I can't wait to see this thing run!

Nice video to break the stress while working on this 066

Harvey........ I've done some internet searching and I've not found this particular conglomeration. I love it. I think you've got this one figured out. I love hot rodding everything. Can't leave anything alone....... Like Tim the Tool Man Taylor.......more POWER!!!! You're awesome Harvey!!!

Lovin’ this build

Gotta say, THANK YOU. Always wondered about a hybrid saw. Ie stihl/husquvarna crossbreed. You are doing what I love. Mix n match to see what works. You have crossed the threshold of hotrod to rat rod.

Love it harvey nice work. Fly buckin in to fire that bad boy up lol. Have a good night everyone

Much better lighting Harvey. Looks great. 🌲❤🌲

IRONHORSE, this is so exciting to watch. Bless you for sharing your wisdom with us!!!

I love this . I done stuff similar to this with my sled. Keep it going you will get this . 😁👍👍

yur my new Hero!!! I wanna give u @ HUGE 2 second Man hug! u rocked my socks off!!!

Nice stove!!!!

Both great saws. I'm on the west coast pull 36-in bar I have 066 Magnum it works just fine. It puts out I had it since 1995.

Cant wait to see the finished product!

Can’t wait to see it run

Very very interesting stuff Ironhorse 👍

Can't wait hear it run.WFO.lol.love it.

Room lookin nice !! I’m not gonna say what I want to cause everyone has already !!!

Awesome idea looking forward to seeing what happens next

@yankdoodlediesel2574

4 жыл бұрын

Jonathan Harsch how in the world you been bud ?!!

@jonathanharsch3243

4 жыл бұрын

@@yankdoodlediesel2574 doing great cutting a lot of white oak right now how is life treating you

@yankdoodlediesel2574

4 жыл бұрын

Jonathan Harsch cuttin timber everyday that we can bout to get rained out ! Boy am I lovin that Ironhorse saw ..that thing seems like it just gets better!!!

@jonathanharsch3243

4 жыл бұрын

@@yankdoodlediesel2574 ya I bet I'm going to build one just as soon as I can find a good parts saw we are fighting the rain to it's that time of year though

@yankdoodlediesel2574

4 жыл бұрын

Jonathan Harsch good !! You won’t regret it !

awesome harv

This will be epic. Even the cat is interested.

@pm270100

4 жыл бұрын

yep it will be BIG

@michaelremski8295

4 жыл бұрын

Isn't a "cat's whisker" a valid measurement of clearance?

@jeffreyrubish347

4 жыл бұрын

@@michaelremski8295 I think so!

That piston up grad will be a nice compliment to that build

I love your ideas knowledge and skills. The only problem I have is following the projects if they were put into a series and you can watch a saw series it would be awesome

Yes! this is exciting!

I'm saving money to buy a dolmar 7900 its 600 us$ here its very expensive thanks for sharing information about that. ❤

hey harv, hope everyone has a great holiday!!!!

Awesome can't wait

Thankyou chris!!

can't wait to see this fire breathing dragon startup and cut!!!!!!!!!!!!!!!!! love to see a great mind at work

I cant wait to see it in the wood!

Awesome. Can't wait to see if it works. I do believe it will . .😊😊😊😊😊😊😊👍👍👍👍👍👍👍👍

makes me want to go on the internet and buy a 7900 domar just so we can build one more of these things I'm like everybody else I can't wait to see this thing run especially if one of those one inch tubed Mufflers on it like the one that buckingstock

Awesome!

This is gonna sell allot more Dolkitas👍👍

I know my 2150 j.r it's a 50cc and it's just like a husky and like a domar. wish you could build a beef one up for me mr. Harvey.. thanks for this video sir and I can't wait for after Thanksgiving to see this thing.. I think buckin is going to like that saw

Now were talkin! 3 badass saws come together for the frankenstihl 395 xtork i want one!

Crazy bugger!! Make it sing 🎤

Looks like my 7900 should take a ride to N.Y.This should be a Monsta!

Hello Harvey!. Does a 7900 & a 9010 have the same stroke?. Great job on the Dolmar there. I love the big saws! Shop looks great Harvey!.. I hope you & your family have a wonderful Thanksgiving! 🦃🦃

thanks ill use that rubber trick

I would drive cross the country to start that saw.Boom

2ND!...thanks for video!...get that SAW fired up!

I'd say your 60% there Harvey..you may need to hack a little of cylinder for top cover but no big deal...great to see throttle cable work...Walt has had good results running xt carbs a little sideways on 372 xp..what about choke lever? I bet you could open lower transfers on the OEM cylinder if you had no choice... Your going to start it....dolmer 7900 is also the Makita 7900? (it looks the same....)...

Looks great! Can't wait to see this run. How do we get a hold of you?

@theironhorse6600

4 жыл бұрын

Email Ironhorsechainsaw@gmail.com

Can’t wait to see the Frankenstein saw run can’t wait to see the American dream saw when you have them finished great videos and interesting keep up the great job shop looking good have a good Thanksgiving

Can't wait till that saw fires up. Got a chance to pick up an old vintage Hoffco Super 480 with an AH-47 engine im pretty sure that a 77cc, think I should?

@jeffreyrubish347

4 жыл бұрын

Why not? 😄

@justinweaver1813

4 жыл бұрын

Yes sir save it please

Harvey ... if the stock carb won’t flow enuff I might just know a guy with a lathe that can bore it out for ya 😉☘️ .... just thinking out loud here but taking off that much off the bottom of the cylinder may jeopardize the strength of the casting ( or maybe not only one way to find out )... maybe a “stroker” might do the trick eh ?

Did you get this saw finished ? I would love to see it running.

Hey Ironhorse! Did you get this project ready? In my thinkin it would have been probably easier to mill the crankcase instead of the cylinder. If you mill the crank case you would not need to put epoxy in there.... Just my thoughts. But is there enough material so you can mill the crankcase?

Hey mr. Ironhorse did you ever get this saw too work id really like too try this if you did if not could you possibly explained why im very curious.

I hope this works better than you hoped. don't know if you don't try

👍❤️🙏☮️✌️☀️

Frankinstein Saw. 👍

holy cow that saw is going to be not saying till it run but dam i want one spread the word gents

Hi Harvey just wondering why you couldn’t use the carb of the 066 magnum?

How did this one turn out?

Doesn't Wiseco make a ccc piston for the sthil 66in a big no bore

@theironhorse6600

2 жыл бұрын

Ccc has Wisconsin make them! And yes!

Is there a follow up video to this project?

@theironhorse6600

3 жыл бұрын

No

Frankinsaw!

Hey Harvey your room is really looking nice, but I'm afraid once you get everything organized you're not going to be able to find anything.

first!

Big

Good job but the saw design is nasty. The UV damage is also massive.

Get buckin to test drive it

YOUR GONNA HAVE TO CALL HER FRANKENSTEIN SOUNDS LIKE A PRETTY COOL BUILD ,YOUR A WEALTH OF KNOWLEDGE IRONHORSE ,GOODLUCK I DONT DOUGHT YOU AT ALL TAKE CARE MY FRIEND

Someone get Ironhorse a 3D metal printer.

The Dolmar engineers and Stihl engineers are prob brothers from what I'm seeing.

Petrosky vd peanody

What ever happen with this build?

Who is brave enough to start it? I can see the line forming now

@Woodman_Custom_Sawing

4 жыл бұрын

I'll do it! 😁

@MrDmmeeks

4 жыл бұрын

Hold my beer....

@yankdoodlediesel2574

4 жыл бұрын

Hold my tea and watch this !!😂😂

@eriknelson6529

4 жыл бұрын

It's a monster!! It will pull smooth as glass you can bet. Those are good saws.+ Harvey . Be good brothers.

@eriknelson6529

4 жыл бұрын

@@yankdoodlediesel2574 put your goat's on the channel!! There cool 😎

Beautify something Not Tupperware pls.

@scrapeteel920

4 жыл бұрын

This SL-11 needs ya.