Add Ceratec to engine, drive 120-300miles. Then you will hear the difference.

@BrandonChinn

4 жыл бұрын

Oh yeah I drove way more then that and I DEFINITELY hear the difference 😂

@ynte8114

21 күн бұрын

meaning as a positive or negative thing?

using it in my new Porsche 992... so far so good.

You should do a before and after but after a few hundred miles or so until it starts working.

I have a 2023 GT and had a tick/knock after the first oil change at the dealer. I put in Ceratec and after around 2 months the sound improved but engine seemed a little sluggish compared to prior to oil change. I dropped the oil after 7,500K from the first service and noticed that the dealer over filled the oil by nearly 1L. I put in the correct amount of Liqui Molly 5w 30 and didn’t add Ceretec and the engine is purring like a little baby now. If you have the issue maybe put in an oil flush then drain oil. Replace oil being careful to fill to the excact amount 9.5L.

This product should be shaken well and you should remove some engine oil so your car does not get overfil.

What type of exhaust you have? Sounds great

I have used alot of additives in my cars the best one is called (Extralube ZX1) its from the UK and originally designed to cool and to stop wear on north sea oil rig drilling drill bits! I swear by it,instant quiet engine,you can put it even in coolant to protect water pump and also in fuel

@DragonXDrei

4 ай бұрын

What about ACTIV8, that is UK too.

I use it in my 19 GT with 530 Pennzoil ultra platinum. So far it's been a year and the engine runs and sounds great!

@BrandonChinn

4 жыл бұрын

19 Coyote 5oh oh sweet! Glad I made a good decision! How many miles are on yours?

@19coyote5oh9

4 жыл бұрын

@@BrandonChinn I've got 5k on her, It was a custom order car and I swapped out the OEM oil at 800. Car is in storage for the winter since November.

@chriscook7219

4 жыл бұрын

I just put it in my 16 GT tonight low and behold the tick is gone changed my oil about 50 miles ago with Royal purple 5w20 and K&N oil filter.

@BrandonChinn

4 жыл бұрын

Chris Cook hey that’s awesome man!

@JoeyBurnsRed

4 жыл бұрын

@@chriscook7219 how much did you put in?

I used ceratec on a 2017 Mustang GT and this aditive after some hundred of miles get rid of it. But when you do an oil change again the sound come back, now im going to add another bottle.

It’s best to add Ceratec when you replace engine oil. Also, best to drive 200-300 kms before you can feel some difference.

Have you checked the bolts 🔩 on the head covers

It usually takes a 100 miles for it to really work. But Amsoil and Ceratec work really well for me

@harisijaz8383

2 жыл бұрын

I’m using AMSOIL engine oil. Would it be fine to use it with it?

@tehshape

Жыл бұрын

@@harisijaz8383 yes

I used 5-30 with a bottle of ceratec and my engine became silky smooth surprisingly 😂 no more typewriter tick

@BrandonChinn

Жыл бұрын

That’s awesome! Glad that worked!

@jeffkelly9197

Жыл бұрын

I'm about to add some my next oil change, did you use 1 bottle or 2?

@Syntaxterror7

Жыл бұрын

@@jeffkelly9197 its one bottle for every 5 quarts, the gt holds 10 quarts so two bottles

@DaveSam1

2 ай бұрын

But you have to match it as mine take 6quarts adding a bottle of 300ml makes it 5400ml instead of 5700ml for engine fluid

@arriearrie940

Ай бұрын

Did you add another ceratec when you do the next oil change ?

I have a 19gt and had the tick then used that 5-20 pennzoil ultra platinum and legit the sound it gone. It’s really quiet now. Was previously running royal purple 6-30

@CaidenHelzer

3 жыл бұрын

Is the tick still gone? I’ve heard stories of it coming back after a few thousand miles?

@amirparvez5415

2 жыл бұрын

@@CaidenHelzer it's gonna be almost the same as using ceratec . Gonna quite down the ticking for a while until the oil starts to degrade a bit and loses some of it qualities. Ceratec gonna last until you change your oil but once you change the oil, the ticking will comeback. So you have to use it everytime you change your oil . Imo you might as well just use the penzoil ultra plat instead of paying extra for ceratec especially if you change your oil every 5-7k . Ceratec might work a lil longer but if you change your oil frequently, you're just wasting more money

Yeah I’m at 400 miles on my 21 GT and it’s already ticking and rattles between 2k-3k rpm quite loudly. Do you think I should wait until I change my oil to add this?

@BrandonChinn

2 жыл бұрын

Yes you can wait to change your oil!

@BrandonChinn

2 жыл бұрын

@s550mc had gone to ford NUMEROUS times prior to this. I stopped going because 1. They didn’t claim anything to be wrong with the vehicle 2. They claim that the problem isn’t actually where/what it is 3. They had refused to work on the car because it “looked” too modded. Took it to multiple dealers as well which is when I started to fix everything on my own. A lot went wrong with this car that I didn’t record, but every time I took it to a Ford dealer, it was always a nightmare

So if the car takes 8 Qts.. Do you add 2 bottles to 8 quarts or to you subtract 2 bottles of fluid (600 ml) and basically add this to 7.5 qts of oil so the total volume of liquid is still 8 qts ?

@BrandonChinn

3 жыл бұрын

Gene realistically you can add in the 2 bottle on top of the 8 without worry. But the recommended use would be to add subtract the fluid from the oil needed. So yes 7.5 is how much you’d add in oil

@amirparvez5415

2 жыл бұрын

Liquid moly recommends that you use 6% blend (94% oil, rest ceratec) so you would want to use a lil less than half a quart .

@rockstarrar

4 ай бұрын

I have a 2023 GT and had a tick/knock after the first oil change at the dealer. I put in Ceratec and after around 2 months the sound improved but engine seemed a little sluggish compared to prior to oil change. I dropped the oil after 7,500K from the first service and noticed that the dealer over filled the oil by nearly 1L. I put in the correct amount of Liqui Molly 5w 30 and didn’t add Ceretec and the engine is purring like a little baby now. If you have the issue maybe put in an oil flush then drain oil. Replace oil being careful to fill to the excact amount 9.5L.

Hello dear i m Adeel Emmanuel from Pakistan I have Suzuki Baleno 04 model i m using egine oil 20 50 can I use this oil 150ml

How is the car today? Do you use it still?

Its crazy that Ford let the tick go past the 18 models.

@BrandonChinn

4 жыл бұрын

The Bullock Family they made a bulletin for it too! And said not to fix it! That’s what o find crazy

@19coyote5oh9

4 жыл бұрын

It really is.

I have a 5.0 GDI and the Lucas low viscosity oil stabilizer seems to do well for me. Thanks for the video.

@rotsbelramos7685

2 жыл бұрын

Dose it come back every now and then

Wouldn’t he be over filled now?

Just got my 2015 and I can’t stand this noise I’m wanting to get some of this but my oil change was at 62k miles and I have 65k is it okay just to add it? Or does it need to be after a oil change?

@BrandonChinn

Жыл бұрын

No you can definitely still add it in!

Over-filling the engine by 2/3rds of a quart will quiet an engine down. It's an old-school used car trick to hide a toasted engine; add extra oil and it quiets the engine down.

Im having the same problem and just added some ceratec. Did you add after every oil change?

@BrandonChinn

3 ай бұрын

Yes after every oil change I add it

Besides the exahust it sound like my 2.0 TFSI :D

Ceratech 100% fixed my 2021 engine tick. It was so loud I would hear it from inside the car at drive-thrus if I had the window down. All day every day, warm or cold. Ever since the ceratech, no more ticks.

@BrandonChinn

Жыл бұрын

Glad it helped you!

@joshsantos1035

11 ай бұрын

Any update on how it’s been going ?

@axelmelgar7448

11 ай бұрын

How many bottles did you use?

You need to run that for an hour to bake it in

Do I have to drain some oil out before adding this to the engine? Thank you

@BrandonChinn

11 ай бұрын

Nope! You should be okay to add it in!

Mines the same way comes and goes at odd times

Hey I was interested in using it in my 2019 Ram 6.4. Just one

@BrandonChinn

3 жыл бұрын

You can definitely use it if recommended 2 due to your engine size but one can still provide small benefits as well!

Im mécanicien in Belgium, the sound is your valves !!!! ( adjustement)

Have you checked the compression in each of the cylinders? I thought this issue caused some of the bores to become non-circular.

@Coyote9smilespergallon

8 ай бұрын

Wrong! And that issue wouldn’t cause a tick at idle anyways

For 7.5 liter of oil should i use 1 bottle ceratec or 2? Thank you..

@BrandonChinn

3 жыл бұрын

3z n technically it’s 5qts per bottle. I’d suggest 2

@user-rh3wd1bx7m

3 жыл бұрын

@@BrandonChinn ok 👍 thank you very much

so you put the 10 quarts and then add one bottle of ceratec? is this correct

@BrandonChinn

3 жыл бұрын

Yes

@HumVDoctor1

2 жыл бұрын

Now I’m confused, you’ve been saying to add “2” bottles & now you’re agreeing that it’s “1” bottle to 10 qts of oil. 🤔

My 2020 GT ticked after the first oil change. Added ceratec and it was gone until my most recent oil change. Planning on adding another dose. Whatcha think?

@BrandonChinn

2 жыл бұрын

Go for it! Ceratec is only rated to last about 20k miles if I’m not mistaken!

@amirparvez5415

2 жыл бұрын

Ceratec will only work so long you have it in your oil. Once you change your oil, it will no longer give you the benefits. So you have to use it every oil change if you want the benefits.

@EldePHX

2 жыл бұрын

Get a Camaro SS instead

@matthewhartup941

Жыл бұрын

​@@amirparvez5415 It's like crack for the coyote 5.0 engine

@kirkstromberg8801

Ай бұрын

​@@EldePHX He doesn't want to get into something slower

Im under the impression the coyote type writer tick is harmless and normal for these motors. My 2011 f150 5.0 sounds exactly the same.

Try STP nano Ceramic. Yiull need to bottles. Wait until you change your oil and out in one less quart of oil.

Have the same on my 2023 since day 1. Is there no solution from Ford yet?

@BrandonChinn

11 ай бұрын

Nope, ford claims it’s normal and not to assess it any further

Hi there, Can I use/safe to use liqui moly CeraTec or mos2 for 2013 MERCEDES Vito 122 CDI. Thanks in advance

@BrandonChinn

Жыл бұрын

Yes it is safe

According with manufacture Ceratec need to run few hundred miles until the product build the popular ceramic film in the internal engine moving parts.

@BrandonChinn

3 жыл бұрын

Metatron Men yeah that what it says on the bottle. I don’t doubt that’s the case but my tick definitely went away. It’s a huge noticeable difference you can’t miss

@metatronmen2431

3 жыл бұрын

@@BrandonChinn i have a good experience as well, i have a fusion with ecoboost engine and had a tapping noise under the hood, is a car of the year so I went to the dealership and they said is normal, is the high pressure fuel pump, in the factory oil i pour molybdenum mos2 and after 2k miles i changed the oil for Amsoil synthetic also added ceratec, after few hundred miles the noise was gone, after other 7k I changed the oil for Amsoil only, running in oil only now with no noise.

Hello, did it work after a few days?

Where is it said to warm up the engine first?

@BrandonChinn

Жыл бұрын

Warming up the engine is required it just makes it much easier to change the oil. Heating the oil will allow it the flow much quicker and smoother out of the pan then if the engine was still cold

Did you add the ceratec on top of the 10 quarts of oil?

@BrandonChinn

4 жыл бұрын

Yes right after the oil change!

@thereissomecoolstuff

4 жыл бұрын

@@BrandonChinn gotcha thanks. Anytime I add an additive I try to remove an equal amount of the fluid to give it room. Especially transmission additives. Glad it is working.

@BrandonChinn

4 жыл бұрын

thereissomecoolstuff so my car takes about 11 qts, so I kinda just substituted a bit of that eleventh quart with the ceratec!

@thereissomecoolstuff

4 жыл бұрын

@@BrandonChinn Sounds good. Mine takes 10 quarts which is a lot. Hard to believe it can still run hot with that much oil..

@jbads1989

4 жыл бұрын

My car uses 5.8 quarts of oil. I should be fine with just the 1 bottle correct?

It's ok to add even tho I just did oil change yesterday with 8 qts? Do I add 1 whole bottle to 8 qts oil?

@BrandonChinn

Жыл бұрын

Ye still good too add

@tehshape

Жыл бұрын

@@BrandonChinn I did and it got rid of my tic! So I have been doing alot of digging and it seems mobil 1 is a common denominator...ppl claim amsoil and Pennsoil is the best and won't permit a tic. I'm just glad the ceratec worked but I'm gonna try one of those 2 oil brands next oil change and see what happens.

@BrandonChinn

Жыл бұрын

@@tehshape I actually only use Amsoil now and I HIGHLY RECOMMEND. So much I became a dealer for them. They are quality no doubt

Using Pennzoil full synthetic alone will eliminate the tick. 21 year Ford tech veteran.

@BrandonChinn

2 жыл бұрын

Have tried this. Around 10k miles tick starts to become noticeable

@brink4065

Жыл бұрын

I use full synthetic every time I change the oil. The tick is still a' ticking! I going to give this stuff a try.

I have a tahoe 2016 idk if I should use one or two bottles of ceratec can anyone tell me?

@BrandonChinn

5 ай бұрын

1 bottle is good for 6 quarts. So if you require more then 8 quarts I would recommend 2 bottles

It sounds exactly the same. How can you not hear it?

I only had to use one bottle.

Why do you use two bottles I'm curious most people that have 5.0 only use one any reason for that

@BrandonChinn

Жыл бұрын

So on the bottle, it states that it’s good for 5 liters of oil which is roughly 5 quarts give or take. 18-22 mustangs take 10qts of oil which would be equivalent to 2 bottles or 10liters. That’s why I used two bottles. I’m sure 1 will still help! But I wanted to cover my bases when trying this

@rcman6895

Жыл бұрын

@@BrandonChinn I see I didn't read the bottle because like I told you earlier this one guy on the video only use one so I assumed I'm just supposed to use one well thank you for that info I really appreciate the video thanks again

Any update if its good to use ?

@BrandonChinn

4 жыл бұрын

Monir Nassar I would recommend to use it! Quiet the engine down a lot more then I was expecting

ceratec is inserted into the engine with the engine running ??

@BrandonChinn

9 ай бұрын

preferred with the engine turned off but you can still add it in. Very possible you might make a mess lol

I think it will take maybe a 100 miles before it works fully

Is the tick still gone? I’ve heard that it returns after a few thousand miles

@BrandonChinn

3 жыл бұрын

After doing this I put about another 15k miles on the vehicle and it never came back

@scooterbit2221

2 жыл бұрын

@@BrandonChinn do you use it after every oil change? And is it always 2 bottles?

@BrandonChinn

2 жыл бұрын

@@scooterbit2221 every 20k miles and yes 2 bottle

You have to drive the car like 100 miles or more like you said at the end then hear the noise

@BrandonChinn

Жыл бұрын

Absolutely, thanks for adding in!

seems like a great way to stop the ticking. The way I'm thinking is if your engine oil is reading top of the fill range then adding 600ml of Ceratec is going to over fill the oil capacity of the engine - not a good thing. I suppose the best way is to add it when doing an oil change and allow the 600ml in the fill up. Adding after the oil change means you should remove 600ml of oil first?

@BrandonChinn

Жыл бұрын

Mostly all vehicles has some give for overfilling. As it doesn’t have to perfect at fill mark going over won’t hurt it by that much. Hope that helps!

@eurly93

Жыл бұрын

I only needed to add 1/3 of bottle to stop the tick. No reason to add entire bottle tbh

@coastalparasail

9 ай бұрын

@@eurly93 you’re wrong you’re supposed to add 2 full bottles trust me I know

You need to take out the same amount of oil as the ceratec that goes in. You never want to have the oil level over the fill line cause too much oil can cause damage.

@BrandonChinn

Ай бұрын

No you don’t. That little amount doesn’t affect it enough. Every engines able to be overfilled a little bit on purpose, for the specific reason of people accidentally overfilling. Nothing more then about .5 - 1qt more though. Anything more and it will most likely get cycled back through the manifold

You say "ticking", why don't you try Liqui moly hydraulic additive?

Solution is 5w50 liqui moly oil and ceratec best combo

@Phuong_Nguyen_

2 жыл бұрын

Leichtlauf?

Bro i have the same problem, Is it normal that it also consumes more oil?

@BrandonChinn

Жыл бұрын

Is it a lot of oil consumption we’re talking about?

@fimidjsharry4017

Жыл бұрын

@@BrandonChinn My 19 gt, is consuming too much oil. I'm pouring oil approximately every 1000 miles, it's not leaking. But I don't understand, it's not normal.

@BrandonChinn

Жыл бұрын

@@fimidjsharry4017 What oil do you use? Also, do you have any mods on the vehicle?

Ticking noise usually happens when a good beat down happens no shit in a bottle is going to put metal or bearings , timing chain stretch back and like it's really fixed. U keep telling ur self it's fixed and see how long that works

@BrandonChinn

27 күн бұрын

You seem really upset over something that doesn’t affect you 😂

My oil looks like chocolate milk with very small white swirls kinda like when you put coffee creamer in a coffee am I the only one?

@granthenneke

3 жыл бұрын

Mine looks like this too... it is normal after running the car.

Whats your issue with the noise? Its supposed to tick

I still heard it

Guys use motosilk engine treatment that one is best high mileage cars and muscles cars recommended and no needs to use every oil change one time using protects over 100.000 miles little bit expensive 😎

@BrandonChinn

3 жыл бұрын

Actually that doesn’t sound like a bad idea. I’m definitely going to look into it, thanks for the heads up!

Did you know this folks. This needs to be added to each oil change. My question to liqui moley was the following. When vehicle is due a service interval after i have used cretec for the first service. Liqui moley: All the liquids, leave the engine bay. You can have your vehicle serviced. And drive the vehicle with cretec in the system and the rest has left the engine during the engine oil service. Liqui moley recommended a new bottle is added at each service to maintain 100 percent cretec protection. 💯

@tylersshenanigans9698

8 ай бұрын

This is wrong, ceratech ceramic properties lasts up to 30k miles, the anti friction last each oil change interval.

It takes about 4-5 months to work , so do another vid…….

how much do you know how to use ?

@BrandonChinn

3 жыл бұрын

One bottle for every 5 liters I believe

@frankscott8555

3 жыл бұрын

@@BrandonChinn 5 liters or did you mean 5 quarts?

@BrandonChinn

3 жыл бұрын

@@frankscott8555 5 quarts lol good catch

do i have to drain the equal amount of oil before putting it?

@BrandonChinn

2 жыл бұрын

No you do not

okay that tick is loud tho, that might be rod bearings

use tsl olie

Bro it sounds exactly the same as before you put that crap in, how much they pay you to sell out ?

I bought my 18 GT 6spd new and have never heard anything abnormal. This video sounds exactly the same as before. New engines make noise it’s normal. I think the “tick” is a paranoia thing or it’s the normal sound of the components on the engine. Piston slap could be a possibility but it definitely has a distinct sound and there is no way an additive will help if it’s the issue. There have been 18-21 GTs come off the show room with piston slap so it’s not that unlikely. Ford will do everything they can to not acknowledge it also.

@BrandonChinn

2 жыл бұрын

I should probably update this video but I will agree this video sounds exactly the same before and after 😂 I no longer have this video, but after getting rid of it we took apart the engine and it did have scoring all along the cylinder walls throughout 3 cylinders

@wildfirewoodandmetalworx2409

2 жыл бұрын

@@BrandonChinn That sucks man. Was it covered under warranty?

@BrandonChinn

2 жыл бұрын

@@wildfirewoodandmetalworx2409 unfortunately not. It was a bummer and a little disappointing but not much to be done. It’s all good though, I guess it happens 😂

@ah4800

Жыл бұрын

@@BrandonChinn how would scored walls not be covered under warranty

@BrandonChinn

Жыл бұрын

@@ah4800 I did have headers on the vehicle when I brought it to them and they claimed the headers caused the issue to the engine. A bunch of BS I already know but it is what it is I guess 😂

Is that consistent ticking normal?! Mine sounds just like this at idle!

@BrandonChinn

3 жыл бұрын

There’s two ticks! There a normal tick you can hear from the injectors then theirs and engine tick. The camera does a terrible job picking up the engine tick I believe so it was hard to hear

@granthenneke

3 жыл бұрын

@@BrandonChinn Okay cool! I guess I have the normal tick! Thanks alot!

@BrandonChinn

3 жыл бұрын

@@granthenneke yeah of course man!!

I cannot hear any difference. You should the dealer check your cam tensioners though.

@BrandonChinn

4 жыл бұрын

Might just do that actually thank you!

@Olkihatttu

4 жыл бұрын

Add Forte Gas Treatment. I'll think that sound also might come injectors? Also lifters make some noise, if i heard right.. But these are cheap tests. Ceratec to oil and petrol treatment, like Forte.

@BrandonChinn

4 жыл бұрын

sami k I’ll try that! I mean couldn’t hurt anything so why not

@Olkihatttu

4 жыл бұрын

@@BrandonChinn one bottle forte gas treatment to half tank of fuel is best way to clean injectors, pumps etc.. It doesn't hurt anything.

The best Mustang engine ever built is the Ford Windsor 302 efi Interceptor engine. Close to 600 horsepower, unlimited horsepower range and no ticking noises. Quite and smooth.

@ah4800

Жыл бұрын

Ya right. The ticking is nothing to worry about.

This video shows no irregular engine noise to begin with.

@granthenneke

3 жыл бұрын

Is this consistent ticking at idle okay? Mine does this as well.

So now your oil level is above max? Additives are supposed to be added with oil so you still have the correct oil level. You could also remove some oil before dumping two bottles of more liquid into your oil.

@BrandonChinn

3 ай бұрын

By standard it is technically above max but engines are built to withhold excess oil in case of overfill. Obviously not much but those two little bottles aren’t going to affect anything

Sounds no different, when you said add it to the transmission, doesnt that mean the gearbox?

@BrandonChinn

Ай бұрын

If I said transmission I definitely meant engine 😂 and after posting this I realize you can’t hear ANYTHING in this video compared to in person. The mic just takes it as all noise

@have-a-gorepairhero2760

Ай бұрын

​@BrandonChinn the Internet is full of idiots so when doing a tutorial it's best to get it right so the sheep don't do exactly what you said. May give it a go on my car 🙂

The engine sounds like my n55 noisy

Placebo effect

Your car engine sounds broken

🙈🙈🙈 you must makes some Miles and then Works 👌

You should have changed the oil.

@BrandonChinn

3 жыл бұрын

The car just got an oil change lol

@sergebasque8460

3 жыл бұрын

Put new oil and than had the created.

Cant believe you put that milk in. Also, you didnt drain anything out first. Didnt hear any change.

sorry mate its you :D its still there just a bit softer :/

@BrandonChinn

3 жыл бұрын

Haha figured, over some time now i have noticed it is gone, all i hear now are the injectors which is a good thing! But hell placebo effect initially I wouldn't doubt that XD

@BadBoysGarage

3 жыл бұрын

​@@BrandonChinn ​ well, then I'm happy for you :) this tick is crazy.. Do you think that ceratec actually helped ? No one exactly knows why it's there :D Someone wrote YT comment, that it could be some minor piston slap (which should be okay) that is heard because of plastic oil pan. @that1320chick had disassembled engine and nothing extreme has been found just some minor wear. So many options.. It scares you to buy a new GT. It's like lottery to get one that doesn't tick, haha :D

@BrandonChinn

3 жыл бұрын

Bad Boy I’m saying man. Literally a gamble. Don’t actually know if it helped or not but around 30k I’m gonna do an update to see what happens. Also have my oil change coming up so we’ll see how that’s looking too

Its the timing chain making noise...i had same noise coming through underneath

@BrandonChinn

Жыл бұрын

The timing chain makes a slightly different noise, I know ford is notorious for cam phasers and chain tensioners though 😂😂

I have better luck using the Liqui Moly MoS2.

I used it today in my 2018 Gt today, and the tick stopped!!

@BrandonChinn

4 жыл бұрын

Gregg Narcisse dude that’s awesome! I’m glad it worked for you!!

@greggnarcisse8479

4 жыл бұрын

@@BrandonChinn wish u the best brother

@BrandonChinn

4 жыл бұрын

Gregg Narcisse thank you man, you as well!

@greggnarcisse8479

4 жыл бұрын

@@BrandonChinn all good Brother

@lawsonleatherwood4249

3 жыл бұрын

hey man! how many miles were you after an oil change? I am currently at about 8000 miles, and changed around 6700 and was wondering if it would be safe to use the ceramic? or should I do an oil change and add the ceramic then?

I feel dizzy after watching your video. Too much vibration like you're in a heavy storm.

No difference at all dude

You are doing it wrong !! You are supposed to warm up the engine and then open the oil cap and pour the Ceratec on a running engine .

Snake oil

another poor test...there is absolutly no noise change ! you need to understand that it needs miles before being effective...

What is it that he can't hear? Sounds exactly the same! Thanks for proving nothing, well done, bravo

@BrandonChinn

3 жыл бұрын

After editing the vid I realized it couldn’t be heard on camera. After about 3 days of driving the ticking has gone away

@virusboy07

3 жыл бұрын

Wow bro chill out

Jajajajjaja it's the same

Is this an actual fix, a bandaid or psychological &&&&. Everyone needs to look up THE OIL GEEK. Adding these additives in general can be more harmful than good, it also depends on what type of engine oil you are using. Some brands of additives react harshly to certain oils, so hence your engine protection is compromised- bearings, piston bore and so on. PLEASE, PLEASE DO YOUR RESEARCH PEOPLE and what you may find might make your head spin. Good luck 😂

@BrandonChinn

Ай бұрын

Can’t tell you if this fixed anything but I will say I did have scoring on the cylinder walls of the engine, most likely prior to using any of this

@vicrefalo3273

Ай бұрын

@@BrandonChinn Hi Brandon, sorry to hear about the piston bore, but again using oil additives will DECREASE PROTECTION even more if you already have damage as it reacts with the chemistry of the oil. I use 5w- 30 full synthetic and have had no issues. Good luck. Vic

Sounds worse. You’re listening to very normal engine operating sounds.

Yeah it sounds like a collapsed lifter bud

Lol these mustang engines are too basic, you can add sludge it would idle better 🤣

@anotheruniqueusername

2 жыл бұрын

i wanna know what exactly is basic about the coyote lol. these things are modern marvels.

Bcareful of cheap copies